00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-S69C Bundle - Two pairs of X-Series 6x9 Inch Component 2-Way Speakers
$1,199.99
$1,999.99
2 Pair Alpine X-S69C 6" x 9" Component System 720W Max, 240W RMS 6" x 9" X-Type 2-Way Component Car Speakers
EXPERIENCE DETAIL YOU’VE NEVER HEARD BEFORE
The new X-Series speakers combine proven technologies, superior materials, and innovative design to reproduce sound so accurately, you’ll feel like you’re right in front of the performance.
HI-RESOLUTION AUDIO
Hi-Res Audio is the next level of digital audio for music fans alike and requires an incredibly wide dynamic range to reproduce music with amazing realism and depth. The X-Series speakers are Hi-Rez compatible and when paired with other X-Series components, provide an incredible Hi-Rez Audio experience.
CARBON GRAPHITE TWEETER
The tweeter’s diaphragm is built from a sheet of carbon graphite which enables it to reproduce frequency ranges in the upper 55kHz range, usually achieved using a harsher, hard dome tweeter like Aluminum or Titanium. Carbon graphite allows us to hit those High-rez audio-compatible frequencies while maintaining the softer, more damped sound qualities of a soft dome.
NEW CONE MATERIAL
The X-Series’ speaker cone is made from a tightly interwoven Nano-fiber material. The extremely small diameter fibers create a damped, rigid cone structure while staying lightweight. Because of this light rigidity, the X-Series speaker is capable of highly accurate sound reproduction while maintaining a soft tonality. The cone’s resistance to flex ensures it is very little to no discoloration of sound and phase shifts. The result is a highly accurate speaker that is well-staged in front of you.
General Features:
6" x 9" X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Tweeters swivel within flush mounts
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount Depth: 3-1/16"
Cutout Dimensions: 5-7/8" x 8-7/8"
4 ohms impedance
Frequency Response: 45 - 50,000 Hz
Sensitivity: 89 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the X-S69C package
2 Woofers
2 Woofer grilles+ 2 Grille badges
2 Tweeters (each has a 26" length of wire attached)
2 Tweeter grilles (installed)
2 Surface mount housings (with tweeters installed)
2 Bottom mount brackets
Two tweeter crossovers (each has attached 32" input and 14" output wires)
2 Rectangular adhesives backed pads (crossover)
2 Circular adhesives backed discs (tweeter)
Eight M4x60mm Machine screws (with washers attached)
8 Flat washers & 8 Split lock washers
Eight 1-1/8" Screws & Eight 5/8" Screws
8 Speed-clips & 4 Speed nuts
Four 5" Zip ties
Warranty information
Important Notice
Online product registration information
Templates and specs on the box
X-S69C owner’s Manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Type-R Bundle 1-Pair R-S65C.2 6.5" Component, 1-Pair R-S65.2 6.5" Coax speakers, R-A60F 600W 4-Ch Amp and KIT4 Amp Wiring Kit
$1,149.85
$2,000.00
Alpine Type-R Bundle 1-Pair R-S65C.2 6.5" Component, 1-Pair R-S65.2 6.5" Coax speakers, R-A60F 600W 4-Ch Amp, and Absolute KIT4 Amp Wiring Kit
Alpine Type-R Bundle 1-Pair R-S65C.2 6.5" Component, 1-Pair R-S65.2 6.5" Coax speakers, R-A60F 600W 4-Ch Amp, and Wiring - This bundle includes a pair of Alpine R-S65C.2 6.5 Inch Component 2-Way Speakers, a pair of Alpine R-S65.2 R-Series 6 1/2-inch Coaxial 2-Way Speakers, Alpine R-A60F R-Series Four-Channel Amplifier, and Absolute KIT4 Amp Wiring Kit
Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers
TURN IT UP
If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
General Features:
6.5-inch R-Series Component 2-way Car Speakers
component speaker system includes two woofers, 2 tweeters, and 2 external crossovers
Power Handling:
Peak: 300 watts
RMS: 100 watts
4 Ohms impedance
Frequency response: 65Hz-40kHz
Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology
CFRP increases the speakers’ mid-bass performance and dynamic range
CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback
Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy
Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately)
Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
2 Woofers
Two 6-1/2" Adapter rings (includes GM/Chrysler)
Two 6x8 Adapter rings
2 Woofer grilles
2 Grille badges
2 Tweeters (each has an attached 30" length of wire)
2 Tweeter grilles (installed)
2 Swivel flush mount housings (with tweeters installed)
Two crossovers (each has attached input and output wires)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-1/8" Screws
Eight 1/2" Screws
8 Speed-clips
Eight M4x12mm Machine screws
Four 5" Zip ties
2 Pieces of two-sided tape
Warranty information
Online product registration note
Important Notice sheet
Template and specs on the box
Alpine R-S65C.2 owner's manual
Alpine R-S65.2 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers
TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY
If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
MORE OUTPUT FOR MORE FUN
The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output.
The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with in-line, passive design, and reduced footprint, which contributes to easier installation.
General Features:
6-1/2" 2-way car speakers (pair)
carbon-fiber-reinforced polymer (CFRP) woofer
carbon-fiber-reinforced polymer dome tweeter
handles up to 100 watts RMS (300 watts peak power)
frequency response: 65-40,000 Hz
sensitivity: 88 dB
top-mount depth: 2-5/8"
grilles included
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Two 2-way Speakers
Two 6-1/2" Adapter rings (includes GM/Chrysler)
2 Grilles
2 Grille badges
Eight 1-1/8" Screws
Eight M4x12mm Machine screws
8 Speed clips
Warranty information
Important Notice
Online product registration information
Template and specs on the box
Alpine R-S65.2 owner's manual
Alpine R-A60F R-Series 4-Channel Power Density Amplifier 600 Watts RMSHI-RESOLUTION AUDIO COMPLIANT
The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant.THE LOUDEST FAMILY ON THE BLOCK
The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.General Features:
Alpine R-A60F
Alpine R-Series 4-Channel Power Density Amplifier
RMS Power Output:
100 Watts x 4 @ 4 Ohm
150 Watts x 4 @ 2 Ohm
300 Watts x 2 @ 4 Ohms Bridged
Class-D Amplifier
Frequency Response: 15 Hz - 45 kHz
S/N ratio: 87dB (ref: 1W into 4 ohm), >106dB (ref: rated power into 4 ohm)
Only 46-degrees of phase shift
Hi-Resolution Audio Compliant
Designed to match perfectly with the R-Series subwoofers (12, 10, and 8-inch sizes available) and the new R-Series speakers.
Fuse Rating: 30A x 2
Approximate Weight: 11 lbs
Dimensions: 10-3/4" W x 2-1/16" H x 10" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
4-Channel amplifier
Two 30-amp ATO fuses (installed)
4 Mounting feet
Four 3/4" Screws
Eight M2.5x5.5mm Machine screws
2mm Allen wrench
3mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine R-A60F owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Type-R Bundle 2-Pairs R2-S65.2 6.5" Coax speakers with R-A60F 600W 4-Ch Amp and Absolute KIT4 4 Gauge Amplifier Wiring Kit
$962.85
$1,099.99
Alpine Type-R Bundle 2-Pairs R-S65.2 6.5" Coax speakers with R-A60F 600W 4-Ch Amp and Absolute KIT4 4 Gauge Amplifier Wiring Kit
2 Alpine R-S65.2 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers
TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY
If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
MORE OUTPUT FOR MORE FUN
The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with in-line, passive design, and reduced footprint, which contributes to easier installation.
General Features:
6-1/2" 2-way car speakers (pair)
carbon-fiber-reinforced polymer (CFRP) woofer
carbon-fiber-reinforced polymer dome tweeter
handles up to 100 watts RMS (300 watts peak power)
frequency response: 65-40,000 Hz
sensitivity: 88 dB
top-mount depth: 2-5/8"
grilles included
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Two 2-way Speakers
Two 6-1/2" Adapter rings (includes GM/Chrysler)
2 Grilles
2 Grille badges
Eight 1-1/8" Screws
Eight M4x12mm Machine screws
8 Speed clips
Warranty information
Important Notice
Online product registration information
Template and specs on the box
Alpine R-S65.2 owner's manual
Alpine R-A60F R-Series 4-Channel Power Density Amplifier 600 Watts RMSHI-RESOLUTION AUDIO COMPLIANTThe R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant.THE LOUDEST FAMILY ON THE BLOCKThe “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.General Features:
Alpine R-A60F
Alpine R-Series 4-Channel Power Density Amplifier
RMS Power Output:
100 Watts x 4 @ 4 Ohm
150 Watts x 4 @ 2 Ohm
300 Watts x 2 @ 4 Ohms Bridged
Class-D Amplifier
Frequency Response: 15 Hz - 45 kHz
S/N ratio: 87dB (ref: 1W into 4 ohm), >106dB (ref: rated power into 4 ohm)
Only 46-degrees of phase shift
Hi-Resolution Audio Compliant
Designed to match perfectly with the R-Series subwoofers (12, 10, and 8-inch sizes available) and the new R-Series speakers.
Fuse Rating: 30A x 2
Approximate Weight: 11 lbs
Dimensions: 10-3/4" W x 2-1/16" H x 10" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
4-Channel amplifier
Two 30-amp ATO fuses (installed)
4 Mounting feet
Four 3/4" Screws
Eight M2.5x5.5mm Machine screws
2mm Allen wrench
3mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine R-A60F owner's manual
Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme
Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. What you might not know is that there are some gimmicks being played by some companies and you could end up getting ripped off!
Today, I would recommend KIT4 for all DIY and Installer. This is a wiring kit with an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of red 4 AWG high current power cable
3 ft. of black 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SBV-10-WRA KTA-30MW KIT4ANL Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with KTA-30MW Amplifier, wire kit
$799.95
$980.00
Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with KTA-30MW Amplifier, Absolute KIT4ANL wiring AMP Kit
This bundle includes an Alpine SBV-10-WRA 10" Loaded Weatherproof Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier, and Absolute KIT4ANL wiring AMP Kit
Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU
When you have a Wrangler, you don’t have extra space to spare. Alpine engineered the SBV-10-WRA to conveniently fit under the front passenger’s seat making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet) Enjoy impactful bass, with your Wrangler’s top on or off. The SBV-10-WRA loads the lower frequency sound into the passenger’s foot well to deliver quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends. General Features:
10" High-Performance Transducer Sealed Subwoofer Enclosure
Power Handling:
Peak: 1000W Total
RMS: 300W Total
Final Impedance: 2 ohms
Preloaded with single 10" Series Subwoofers
Sealed Enclosure with (finish type)
Enclosure Dimensions: 16-1/4" L x 15-3/4" W x 8-3/8" H
Subwoofer Features:
Water Resistance: IP66 Rating
Frequency Response: 35-200Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
Alpine KTA-30MW owner's manual
Absolute KIT4ANL Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts ANL Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme
Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. What you might not know is that there are some gimmicks being played by some companies and you could end up getting ripped off!
Today, I would recommend KIT4ANL for all DIY and Installer. This is a wiring kit with an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
16 ft. of 4 AWG high current power cable
3 ft. of 4 AWG ground cable
17 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 ANL 4 AWG water-resistant inline fuse holder
1 PCS 100 AMP ANL Fuse
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 1-Pair SPE-6090 6x9" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp and Wiring
$349.99
$599.99
Alpine Bundle 1-Pair SPE-6090 6x9" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp, and Wiring
Alpine Bundle 1-Pair SPE-6090 6x9" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes a pair of the Alpine SPE-6090 6X9" Coaxial 2-Way Speaker Set, a pair of the Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.
Alpine SPE-6090 600W Peak (150W RMS) 6x9" 2-Way Type-E Series Coaxial Speakers w/ Silk Tweeters
General Features
6" x 9" Type-E Coaxial 2-way Car Speakers
Peak Power Handling: 600 watts per pair / 300 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 65-18,000 Hz
Sensitivity: 91 dB
Top-Mount Depth: 3"
Mounting Diameter: 5-15/16" x 8-3/4"
Authorized Internet Dealer
1-year Warranty
Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set (Pair)
RMS Power Handling: 50W
Peak Power Handling: 200W
Frequency Response: 82Hz - 20kHz
Outfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function.
Type-E speakers are developed off of soft dome tweeters to output quality sound
Alpine BBX-F1200 - 4-Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers
$429.90
$999.95
2 Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers
TURN IT UP
If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
General Features:
6.5-inch R-Series Component 2-way Car Speakers
component speaker system includes two woofers, 2 tweeters, and 2 external crossovers
Power Handling:
Peak: 300 watts
RMS: 100 watts
4 Ohms impedance
Frequency response: 65Hz-40kHz
Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology
CFRP increases the speakers’ mid-bass performance and dynamic range
CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback
Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy
Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately)
Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R-S65C.2 package:
2 Woofers
Two 6-1/2" Adapter rings (includes GM/Chrysler)
Two 6x8 Adapter rings
2 Woofer grilles
2 Grille badges
2 Tweeters (each has an attached 30" length of wire)
2 Tweeter grilles (installed)
2 Swivel flush mount housings (with tweeters installed)
Two crossovers (each has attached input and output wires)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-1/8" Screws
Eight 1/2" Screws
8 Speed-clips
Eight M4x12mm Machine screws
Four 5" Zip ties
2 Pieces of two-sided tape
Warranty information
Online product registration note
Important Notice sheet
Template and specs on the box
R-S65C.2 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 2-Pairs of SXE-1726s 6.5" Coax Speakers and BBX-F1200 280W 4-Ch Amp and Wiring
$299.99
$350.00
Alpine Bundle 2-Pairs of SXE-1726s 6.5" Coax Speakers and BBX-F1200 280W 4-Ch Amp and Wiring
This bundle includes 2 pairs of the Alpine SXE-1726S 6 1/2" 2-way Coaxial Speaker, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine SXE-1726S 6 1/2" 2-way Coaxial Speaker
RMS Power: 40 Watts
Peak Power: 220 Watts
Nominal Impedance: 4 Ohms
Frequency Response 60Hz-20kHzVoice Coil: Kapton
Woofer Magnet: Ferrite
Tweeter Magnet: Neodym
Alpine BBX-F1200 4 Channel Amplifier4 channel power amplifier 4/3/2 channel 600 wattsThis new BBX amplifier gives you Alpine power performance at an amazing price. And they're designed to fit easily in virtually any system.High Power, Great ValueThis amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.High Pass and Low Pass FiltersThese two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency.Bass EQ for Best BassPerformance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.
Alpine BBX-F1200 - 4 Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 2-Pair SPE-6090 6x9" Coax speakers, with BBX-F1200 280W 4-Ch Amp and Wiring
$499.99
$599.99
Alpine Bundle 2-Pair SPE-6090 6x9" Coax speakers, with BBX-F1200 280W 4-Ch Amp and Wiring
Alpine Bundle 2-Pair SPE-6090 6x9" Coax speakers, with BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes 2 pairs of Alpine SPE-6090 6X9" Coaxial 2-Way Speaker Set, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.
Alpine SPE-6090 600W Peak (150W RMS) 6x9" 2-Way Type-E Series Coaxial Speakers w/ Silk Tweeters
General Features
6" x 9" Type-E Coaxial 2-way Car Speakers
Peak Power Handling: 600 watts per pair / 300 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 65-18,000 Hz
Sensitivity: 91 dB
Top-Mount Depth: 3"
Mounting Diameter: 5-15/16" x 8-3/4"
Authorized Internet Dealer
1-year Warranty
Alpine BBX-F1200 - 4 Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 2-Pairs of SXE-6926s 6x9" Coax Speakers and a BBX-F1200 280W 4-Ch Amp and Wiring
$299.99
$549.99
Alpine Bundle 2-Pairs of SXE-6926s 6x9" Coax Speakers and a BBX-F1200 280W 4-Ch Amp and Wiring
Alpine Bundle 2-Pairs of SXE-6926s 6x9" Coax Speakers and a BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes 2 pairs of Alpine SXE-6926S 6x9" 2-Way Coaxial Speaker, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.
Alpine SXE-6926S 2-way 6"x9" 280 Watts Coaxial SpeakersAlpine SXE-6926S main feature is a Mylar-Titanium Balanced Dome Tweeter for smooth vocal reproduction at a price not to be missed. The tweeters in this set sound fantastic. Alpine mids and highs have always been well-rounded and smooth sounding. This set of component speakers is no different.General Features:
6 x 9" Type-E Series Coaxial Car Speakers
Power Handling:
Peak: 280 watts per pair / 140 watts each
RMS: 90 watts per pair / 45 watts each
Long fiber natural pulp woofer
Mylar dome tweeter
Frequency Response: 40-20,000 Hz
Mounting Depth: 68mm
Sensitivity: 92dB
Grilles included
What is in the SXE-6926S package:
6X9" Speakers (2)
Mounting screws (4)
Mounting screws (8)
Speaker connection cables (2)
SXE-6926S owner's manual
Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier
This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.
High Power, Great Value
This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.
High Pass and Low Pass Filters
These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency.
Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.
General Features:
Alpine BBX-F1200
Class-A/B 2-ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 50 watts x 4 channel
2 ohms: 70 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 130 watts x 2 channel
Total power output: 600 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
4/3/2 or channel operation
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: .2V - 8V
Frequency Response: 5 - 50000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 95dB
Variable high-pass filter: 50 - 500 Hz
Variable low-pass filter: 50 - 500 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 40A x 1
Dimensions: 9.4"W x 12.9"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty.
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer and Bass Knob
$335.87
$699.98
Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer and Bass Knob
Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W10S4 10-inch Single 4 Ohm Subwoofer, an Alpine RUX-KNOB.2 Remote Bass Knob, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W670 iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W670 iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. PowerStack capable with the Alpine iLX-W670 iLX-W650
Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
100W x 1 RMS (4, 14.4V, 1% THD+N)
200W x 1 RMS (2, 14.4V, 1% THD+N)
400W x 1 DPP (2, 14.4V, 1% THD+N)
>85dB S/N (ref. 1W into 4)
0.1% THD+N (ref. 10W into 2)
Single-side 22-pin connector
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine W10S4 10-inch Single 4 Ohm SubwooferOverview:
10-inch single 4 subwoofer
250W RMS
750W peak power handling
Frequency Response: 30Hz-200Hz
24Hz-200Hz frequency response
5-1/16-inch mounting depth
Recommended Sealed box volume: 0.83 cu. Ft.
Recommended Ported box volume: 1.51 cu. ft
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob
$336.87
$649.99
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W12S4 12-inch Single 4 Ohm Subwoofer, an Alpine RUX-KNOB.2 Remote Bass Knob, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space.
CTA-2006
PowerStack capable with the Alpine iLX-W650
Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
100W x 1 RMS (4, 14.4V, 1% THD+N)
200W x 1 RMS (2, 14.4V, 1% THD+N)
400W x 1 DPP (2, 14.4V, 1% THD+N)
>85dB S/N (ref. 1W into 4)
0.1% THD+N (ref. 10W into 2)
Single-side 22-pin connector
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine W12S4 12-inch Single 4 Ohm SubwooferOverview:
12-inch single 4 subwoofer
250W RMS
750W peak power handling
Frequency Response: 32Hz-200Hz
5-5/16-inch mounting depth
Recommended Sealed box volume: 1.09 cu. Ft.
Recommended Ported box volume: 1.91 cu. ft
What's in the W12S4 package:
One 12" Subwoofer
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty information
Important Notice!
W12S4 owner's manual
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver with Jeep Wrangler 03-06 Dash Kit, Wiring Harness and Antenna Adapter
$379.99
$999.99
Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver with Jeep Wrangler 03-06 Dash Kit, Wiring Harness, and Antenna Adapter
Jeep Wrangler 03-06 Dash Kit, Wiring Harness and Antenna Adapter with Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver - This bundle includes an Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility, a Metra 95-6541 Dash Kit Compatible with Jeep Wrangler 2003-2006, a Metra 70-6502 Wiring Harness Compatible with Chrysler 2002-2009, a Metra 40-CR10 Antenna Adapter Cable Compatible with Chrysler/Dodge/Ford/GM/Jeep 20002 and Up, a pry kit.Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility
General Features:
digital media receiver with AM/FM tuner (does not play CDs)
shallow-mount chassis design (2-7/16" deep)
designed to pair with Alpine's KTA-450 power pack amplifier
touchscreen swipe controls
designed to work with CarPlay and Android Auto
hands-free control lets you access apps using your voice
built-in Bluetooth connectivity
enjoy music apps like Pandora and Spotify
built-in amplifier (18 watts RMS CEA-2006/50 peak x 4 channels)
USB port accommodates various devices and thumb drives
FLAC Compatible
7" capacitive touchscreen
Smartphone Features:
designed to work with CarPlay and Android Auto
built-in iPod, iPhone, and iPad control
Android control through USB
Metra 95-6541 Dash Kit Compatible with Jeep Wrangler 2003-2006
ISO DDIN radio provision
Painted black to match the factory dash panel
Wiring & Antenna Connections
Metra 70-6502
Wiring Harness Compatible with Chrysler 2002-2009
Plugs into Car Harness at radio
Power 4 Speakers
Metra 40-CR10
Antenna Adapter Cable Compatible with Chrysler/Dodge/Ford/GM/Jeep 20002 and Up
Chrysler factory antenna adapter
Snap-lock to aftermarket radio
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.