00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-T600 600W 2Channel Class A/B Amplifier and Cerwin Vega XED12V2 12" 1000 Watts 4 Ohm Subwoofer
$229.99
$399.99
Alpine BBX-T600 600W Max 2Channel Class A/B Amplifier and Cerwin Vega XED12V2 1000 Watts 4 Ohm SVC Subwoofer
Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier
This new BBX amplifier gives you Alpine power performance at an amazing price. And they are designed to fit easily in virtually any system. This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance with Bass EQ, you can maximize the performance of your system and get even more powerful bass.
General Features:
Alpine BBX-T600
Class-A/B 2-ohm Stable 2-Channel Amplifier
50 Watts @ 4 Ohm x 2 Channel
70 Watts @ 2 Ohm x 2 Channel
130 Watts @ 4 Ohm x 1 Channel Bridged
Total power output: 600 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
2 or Mono channel operation
1 pair of preamp outputs to connect multiple amplifiers
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: .2V - 8V
Frequency Response: 5 - 50000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 95dB
Variable high-pass filter: 80 - 1200 Hz
Variable low-pass filter: 50 - 500 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 20A x 1
Dimensions: 9.84"W x 9.44"L x 2"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Cerwin Vega XED12V2 1000 Watts 4 Ohm SVC XED Series Subwoofer
Universal 12" XED Mobile Series 1000W 4-ohm SVC Subwoofer by Cerwin-Vega. Feel the bass with these premium quality subwoofers by Cerwin-Vega designed and manufactured to deliver the decibels. Constructed from the highest quality materials with the utmost attention to every tiny detail, they will provide maximum performance for years to come.
General Features:
12" Single 4-ohm Xtreme-Energy Design Subwoofer
Parabolic Poly Cone
Single Stitched High Roll Surround
Vented Pole Piece/Basket for Cooler Voice Coil Temperatures
Bumped Back Plate for Maximum Excursion
Signature Cerwin-Vega Bass
Peak Power Handling: 1000W
RMS Power Handling: 150W
Impedance: 4 Ohms
Voice Coil: Single
Voice Coil Size: 2"
Mounting Diameter: 10.82"
Mounting Depth: 5.25"
Sensitivity: 85.5dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega XED10V2 Alpine BBX-T600
Alpine BBX-T600 600W Max 2Channel Class A/B Amplifier and Cerwin Vega XED10V2 10" 800 Watts 4 Ohm Subwoofer $279.99 $399.99
Alpine BBX-T600 600W Max 2Channel Class A/B Amplifier and Cerwin Vega XED10V2 10" 800 Watts 4 Ohm Subwoofer $279.99 $399.99
Alpine BBX-T600 600W Max 2Channel Class A/B Amplifier and Cerwin Vega XED10V2 800 Watts 4 Ohm SVC Subwoofer
Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier
This new BBX amplifier gives you Alpine power performance at an amazing price. And they are designed to fit easily in virtually any system. This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance with Bass EQ, you can maximize the performance of your system and get even more powerful bass.
General Features:
Alpine BBX-T600
Class-A/B 2-ohm Stable 2-Channel Amplifier
50 Watts @ 4 Ohm x 2 Channel
70 Watts @ 2 Ohm x 2 Channel
130 Watts @ 4 Ohm x 1 Channel Bridged
Total power output: 600 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
2 or Mono channel operation
1 pair of preamp outputs to connect multiple amplifiers
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: .2V - 8V
Frequency Response: 5 - 50000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 95dB
Variable high-pass filter: 80 - 1200 Hz
Variable low-pass filter: 50 - 500 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 20A x 1
Dimensions: 9.84"W x 9.44"L x 2"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Cerwin Vega XED10V2 800 Watts 4 Ohm SVC XED Series Subwoofer
Universal 10" XED Mobile Series 800W 4-ohm SVC Subwoofer by Cerwin-Vega. Feel the bass with these premium quality subwoofers by Cerwin-Vega, designed and manufactured to deliver the decibels. Constructed from the highest quality materials with the utmost attention to every tiny detail, they will provide maximum performance for years to come.
General Features:
10" Single 4-ohm Xtreme-Energy Design Subwoofer
Parabolic Poly Cone
Single Stitched High Roll Surround
Vented Pole Piece/Basket for Cooler Voice Coil Temperatures
Bumped Back Plate for Maximum Excursion
Signature Cerwin-Vega Bass
Peak Power Handling: 800W
RMS Power Handling: 125W
Impedance: 4 Ohms
Voice Coil: Single
Voice Coil Size: 2"
Mounting Diameter: 9.4" / 238mm
Mounting Depth: 4.8"
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-T600 Rockford Fosgate R1S4-10
Alpine BBX-T600 600W Max 2Channel Class A/B Amplifier and Rockford R1S4-10 200W RMS 10" Single 4-Ohm R1 Prime Subwoofer $299.99 $550.00
Alpine BBX-T600 600W Max 2Channel Class A/B Amplifier and Rockford R1S4-10 200W RMS 10" Single 4-Ohm R1 Prime Subwoofer $299.99 $550.00
Alpine BBX-T600 600W Max 2Channel Class A/B Amplifier and Rockford R1S4-10 200W RMS 10" Single 4-Ohm R1 Prime Subwoofer
Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier
This new BBX amplifier gives you Alpine power performance at an amazing price. And they are designed to fit easily in virtually any system. This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance with Bass EQ, you can maximize the performance of your system and get even more powerful bass.
General Features:
Alpine BBX-T600
Class-A/B 2-ohm Stable 2-Channel Amplifier
50 Watts @ 4 Ohm x 2 Channel
70 Watts @ 2 Ohm x 2 Channel
130 Watts @ 4 Ohm x 1 Channel Bridged
Total power output: 600 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
2 or Mono channel operation
1 pair of preamp outputs to connect multiple amplifiers
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: .2V - 8V
Frequency Response: 5 - 50000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 95dB
Variable high-pass filter: 80 - 1200 Hz
Variable low-pass filter: 50 - 500 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 20A x 1
Dimensions: 9.84"W x 9.44"L x 2"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Rockford Fosgate Prime R1S4-10 200W RMS 10" Single 4-Ohm R1 Prime Series Subwoofer
General Features:
10" Single 4-Ohm Prime Series Subwoofer
200 Watts RMS
400 Watts Max
Recommended power range: 100 - 200 watts RMS
CEA-2031 compliant
Verified with Klippel speaker certification
12 AWG compression terminals
Fiber-reinforced painted paper-pulp woofer cone
High temperature 2" voice coil
Laser-etched aluminum dust cap
High durability compressed foam surround
Proprietary powder coated stamped steel frame with spider cavity venting
Fatigue resistant poly-cotton spider with integral woven leads
High-temperature copper voice coil with aluminum former
Integrated ABS decorative trim ring
Mounting Depth: 4.57"
Cutout Diameter: 9.13"
Magnet Weight: 51.57oz
Frequency Response: 24 - 250 Hz
Xmax: 5.8mm
Sensitivity: 86 dB @ 1 watt / 1 meter
Optimized for sealed enclosures
Recommended Sealed Enclosure: 0.50 - 0.85ft³
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Type-R Bundle 4 R-S65.2 6.5" Coax speakers with R-A60F 600W 4-Ch Amp and Wiring Amp Kit
$962.85
$1,099.99
Alpine Type-R bundle 2-pairs R-S65.2 6.5" coax speakers with R-A60F 600W 4-Ch Amp and Absolute KIT4 wiring kitAlpine Type-R Bundle 2-Pairs R-S65.2 6.5" Coax speakers with R-A60F 600W 4-Ch Amp and Wiring - This bundle includes 2 pairs of the Alpine R-S65.2 R-Series 6 1/2-inch Coaxial 2-Way Speakers, an Alpine R-A60F R-Series Four-Channel Amplifier, and Absolute KIT4 wiring kitAlpine R-S65.2 R-Series 6 1/2-inch Coaxial 2-Way Speakers (Pair)Type-R speakers have been known for their dependability and sound performance at a mid-line price. Chances are, you have heard the Type-R speakers and appreciated the loud & fun listening experience. The new R-Series speakers continue the tradition and offer more output, fidelity, and technology to allow these speakers to perform for years to come.
General Features: • CTA-2031 Specifications: 100W RMS, 300W Peak, 4 Ohm• l Features:6-1/2" 2-way car speakers (pair)• carbon-fiber-reinforced polymer (CFRP) woofer• carbon-fiber-reinforced polymer dome tweeter• handles up to 100 watts RMS (300 watts peak power)• frequency response: 65-40,000 Hz• sensitivity: 88 dB• top-mount depth: 2-5/8"• grilles included• Authorized Internet Dealer• 1-year Manufacturer's Warranty
Alpine R-A60F R-Series Four-Channel Amplifier 600 Watts 150 Watts x 4 at 2-Ohms, 100 Watts x 4 at 4-Ohms
General Features:• Alpine R-A60F• Alpine R-Series 4-Channel Power Density Amplifier• RMS Power Output:o 100 Watts x 4 @ 4 Ohmo 150 Watts x 4 @ 2 Ohmo 300 Watts x 2 @ 4 Ohms Bridged• Class-D Amplifier• Frequency Response: 15 Hz - 45 kHz• S/N ratio: 87dB (ref: 1W into 4 ohm), >106dB (ref: rated power into 4 ohm)• Only 46-degrees of phase shift• Hi-Resolution Audio Compliant• Designed to match perfectly with the R-Series subwoofers (12, 10, and 8-inch sizes available) and the new R-Series speakers.• Fuse Rating: 30A x 2• Approximate Weight: 11 lbs.• Dimensions: 10-3/4" W x 2-1/16" H x 10" D• Authorized Internet Dealer• 1-year Manufacturer's Warranty
Absolute KIT-4 Complete 4 Gauge Amplifier Kit
General Features:• Complete 4 Gauge Amplifier Kit• Designed specifically for car audio systems up to 1000 watts• Premium power and ground wire provide optimal power transfer• Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier• Terminals are gold-plated for excellent signal transfer• For use in any car, truck, RV, or boat• Authorized Internet Dealer• 1-year Manufacturer's warranty
Package Includes:1. 17 ft. of red 4 AWG high current power cable2. 3 ft. of black 4 AWG ground cable3. 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire4. 20 ft. of 12 AWG OFC Speaker cable5. 20 ft. of 16 AWG remote turn-on wire6. 6 ft. of split loom tubing7. 1 Gold plated 80 AMP AGU fuse8. 1 4 AWG gold ring terminal9. 1 4 AWG water-resistant inline fuse holder10. 2 Ring terminals11. 2 Spade terminals (4 gauge)12. 5 Spade terminals (14-16 gauge)13. 3 Self-tapping screws14. 1 Rubber grommet15. 20 Black cable ties16. 2 Butt connectors (18-22 gauge)17. 1 Butt connector (4 gauge)⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SBV-10-WRA KTA-30MW KIT4
Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with KTA-30MW Amplifier, Absolute KIT4 wire kit $779.95 $950.00
Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with KTA-30MW Amplifier, Absolute KIT4 wire kit $779.95 $950.00
Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with KTA-30MW Amplifier, Absolute KIT4 wire kit
This bundle includes an Alpine 10" Loaded Weatherproof Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier, and an Absolute Kit 4 Wiring Kit.Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU10-inch subwoofer pre-loaded into a sealed, custom-fit enclosure. Designed to be pressure fit under the front passenger's seat rails, no mounting hardware is required. Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction. OEM-grade weather-resistant Molex 2-pin connector with pigtail wire harness. Frequency Response: 45-200Hz. When you have a Wrangler, you don't have extra space to spare. Alpine engineered the SBV-10-WRA to conveniently fit under the front passenger seat making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. WEATHER RESISTANT - Driving with the top off is part of the fun of owning a Wrangler, but you sometimes get caught off-guard with the top down and inclement weather. The SBV-10-WRA is weather-resistant and rated IP66, so it's protected from total dust ingress and water from any direction. Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch input
Absolute KIT-4 Complete 4 Gauge Amplifier Kit
General Features:
• Complete 4 Gauge Amplifier Kit• Designed specifically for car audio systems up to 1000 watts• Premium power and ground wire provide optimal power transfer• Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier• Terminals are gold-plated for excellent signal transfer• For use in any car, truck, RV, or boat• Authorized Internet Dealer• 1-year Manufacturer's warranty
Package Includes:
1. 17 ft. of red 4 AWG high current power cable2. 3 ft. of black 4 AWG ground cable3. 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire4. 20 ft. of 12 AWG OFC Speaker cable5. 20 ft. of 16 AWG remote turn-on wire6. 6 ft. of split loom tubing7. 1 Gold plated 80 AMP AGU fuse8. 1 4 AWG gold ring terminal9. 1 4 AWG water-resistant inline fuse holder10. 2 Ring terminals11. 2 Spade terminals (4 gauge)12. 5 Spade terminals (14-16 gauge)13. 3 Self-tapping screws14. 1 Rubber grommet15. 20 Black cable ties16. 2 Butt connectors (18-22 gauge)17. 1 Butt connector (4 gauge)
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 1-Pair SXE-6926s 6x9" Coax, 1-Pair SXE-1751s 6.5" Component, BBX-F1200 280W 4-Ch Amp and Wiring
$299.99
$399.99
Alpine Bundle 1-Pair SXE-6926s 6x9" Coax, 1-Pair SXE-1751s 6.5" Component, BBX-F1200 280W 4-Ch Amp, and WiringAlpine Bundle 1-Pair SXE-6926s 6x9" Coax, 1-Pair SXE-1751s 6.5" Component, BBX-F1200 280W 4-Ch Amp and Wiring
Alpine SXE-6926S 2-way 6"x9" 280 Watts Coaxial SpeakersGeneral Features:
6 x 9" Type-E Series Coaxial Car Speakers
Power Handling:
Peak: 280 watts per pair / 140 watts each
RMS: 90 watts per pair / 45 watts each
Long fiber natural pulp woofer
Mylar dome tweeter
Frequency Response: 40-20,000 Hz
Mounting Depth: 68mm
Sensitivity: 92dB
Grilles included
What is in the SXE-6926S package:
6X9" Speakers (2)
Mounting screws (4)
Mounting screws (8)
Speaker connection cables (2)
SXE-6926S owner's manual
Alpine SXE-1751S 6 1/2" 2-Way Component SpeakerGeneral Features:
RMS Power: 45 Watts
Peak Power: 280 Watts
Nominal Impedance: 4 Ohms
Frequency Response: 60Hz-20kHz
Ferrite Woofer
Neodym Tweeter
Kapton Voice Coil
Alpine BBX-F1200 - 4-Channel Amplifier
General Features:
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 1-Pair SPE-6000 6.5" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp and Wiring
$339.99
$499.99
Alpine Bundle 1-Pair SPE-6000 6.5" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp, and Wiring
Alpine Bundle 1-Pair SPE-6000 6.5" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes a pair of Alpine SPE-6000 6-1/2" Coaxial 2-Way Speaker Set, a pair of Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine SPE-6000 6-1/2" Coaxial 2-Way Speaker Set (Pair)
RMS Power Handling: 60 Watts
Peak Power Handling: 240 Watts
Frequency response: 68-20,000 Hz
Type-E speakers are developed off of soft dome tweeters to output quality sound
Outfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function.
Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set (Pair)
RMS Power Handling: 50W
Peak Power Handling: 200W
Frequency Response: 82Hz - 20kHz
Outfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function.
Alpine BBX-F1200 280 Watt 4-Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
Absolute KIT 4 Wiring Kit
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of red 4 AWG high current power cable
3 ft. of black 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle SPE-6090 6x9" Coax speakers, SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp and Wiring
$399.99
$599.99
Alpine Bundle 1-Pair SPE-6090 6x9" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp, and Wiring
Alpine Bundle 1-Pair SPE-6090 6x9" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes a pair of the Alpine SPE-6090 6X9" Coaxial 2-Way Speaker Set, a pair of the Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.
Alpine SPE-6090 600W Peak (150W RMS) 6x9" 2-Way Type-E Series Coaxial Speakers w/ Silk Tweeters
General Features
6" x 9" Type-E Coaxial 2-way Car Speakers
Peak Power Handling: 600 watts per pair / 300 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 65-18,000 Hz
Sensitivity: 91 dB
Top-Mount Depth: 3"
Mounting Diameter: 5-15/16" x 8-3/4"
Authorized Internet Dealer
1-year Warranty
Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set (Pair)RMS Power Handling: 50WPeak Power Handling: 200WFrequency Response: 82Hz - 20kHzOutfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function.Type-E speakers are developed off of soft dome tweeters to output quality sound.Alpine BBX-F1200 4-channel power amplifier 4/3/2 channel 600 watts
This new BBX amplifier gives you Alpine power performance at a fantastic price. And they're designed to fit easily in virtually any system.
Alpine BBX-F1200 - 4-Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
Absolute KIT 4 Wiring Kit
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of red 4 AWG high current power cable
3 ft. of black 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold-plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-S69 6x9" Speaker Bundle - Two Pairs of 6x9" S-Series S-S69 2-Way Coaxial Speakers
$246.90
$349.99
2 Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers
FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
6" x 9" Type S Series 2-Way Coaxial Car Speakers
Power Handling:
Peak: 520 watts per pair / 260 watts each
RMS: 170 watts per pair / 85 watts each
Recommended Power Range: 10 - 85 watts RMS per channel
Carbon Fiber Reinforced Plastic (CFRP) Cone
High Amplitude Multi-Roll (HAMR) Surround
1" Silk Dome Tweeter
Rubber magnet boot cover
CEA-2031 compliant speakers
35mm Voice Coil
Top-mount Depth: 2-15/16"
Cutout Dimensions: 5-29/32" x 8-3/4"
4 ohms Impedance
Frequency Response: 65 - 22000 Hz
Sensitivity: 90dB
Compatible with the Alpine KTE-S69G Grille
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-S69 package:
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire
Eight 1-3/16" Screws
Eight M4x60mm Machine screws
Eight M4 Nuts
8 Speed clips
16 Flat washers
8 Split lock washers
Warranty information
Online product registration information
Template and specs on the box
S-S69 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S-S57 5x7" (6x8") Speaker Bundle Two Pairs of 5x7" (6x8") 2-Way Coaxial Speakers
$246.90
$399.99
Alpine S-S57 5x7" (6x8") Speaker Bundle - Two Pairs of 5x7" (6x8") S-Series S-S57 2-Way Coaxial Speakers
This bundle contains two pairs of Alpine S-S57 S-Series 5X7" 2-Way Speaker Sets
Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers
IT FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5"x7" S-Type Series TYPE Car Speakers/Component System
Peak Power Handling: 460 watts per pair / 230 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
1.1" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2-11/32"
Cutout Dimensions: 4-15/16" x 7-3/16"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-S57 package:
S-S57 owner's manual
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Type-X Bundle 1-Pair X-S69C 6x9" Component with 1-Pair X-S65 6.5" Coax and X-A70F 700W 4-Ch Amp
$1,999.99
$3,200.00
Alpine Type-X Bundle 1-Pair X-S69C 6x9" Component with 1-Pair X-S65C 6.5" Component and X-A70F 700W 4-Ch Amp Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:
Alpine X-Series X-A70F
Class-D Full Range 2 ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 120 watts x 4 Channel
2 ohms: 175 watts x 4 Channel
1 ohm: ------------N/A-----------
Bridged, 4 Ohms: 350 Watts X 2 Channel
Total power output: 700 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
4/3/2 channel operation
Speaker-level (high-level) inputs
Preamp Outputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .4 - 10V
Low level: .1 - 4V
Frequency Response: 10 - 60,000
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >106dB
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Variable subsonic filter: 50 - 40Hz, -24dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 35A x 3
4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
2 Alpine X-S69C 6" x 9" Component System 720W Max, 240W RMS 6" x 9" X-Type 2-Way Component Car Speakers EXPERIENCE DETAIL YOU’VE NEVER HEARD BEFORE The new X-Series speakers combine proven technologies, superior materials, and innovative design to reproduce sound so accurately, you’ll feel like you’re right in front of the performance. HI-RESOLUTION AUDIO Hi-Res Audio is the next level of digital audio for music fans alike and requires an incredibly wide dynamic range to reproduce music with amazing realism and depth. The X-Series speakers are Hi-Rez compatible and when paired with other X-Series components, provide an incredible Hi-Rez Audio experience. CARBON GRAPHITE TWEETER The tweeter’s diaphragm is built from a sheet of carbon graphite which enables it to reproduce frequency ranges in the upper 55kHz range, usually achieved using a harsher, hard dome tweeter like Aluminum or Titanium. Carbon graphite allows us to hit those High-rez audio-compatible frequencies while maintaining the softer, more damped sound qualities of a soft dome. NEW CONE MATERIAL The X-Series’ speaker cone is made from a tightly interwoven Nano-fiber material. The extremely small diameter fibers create a damped, rigid cone structure while staying lightweight. Because of this light rigidity, the X-Series speaker is capable of highly accurate sound reproduction while maintaining a soft tonality. The cone’s resistance to flex ensures it is very little to no discoloration of sound and phase shifts. The result is a highly accurate speaker that is well-staged in front of you. General Features:
6" x 9" X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Tweeters swivel within flush mounts
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount depth: 3-1/16"
Cutout Dimensions: 5-7/8" x 8-7/8"
4 ohms impedance
Frequency Response: 45 - 50,000 Hz
Sensitivity: 89 dB
Authorized Dealer
1-year Manufacturer's Warranty
Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles.
All about the build
Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures.
Serious power handling
The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features:
6.5 X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount depth: 2-5/16"
Cutout Dimensions: 5-13/32"
4 ohms impedance
Frequency Response: 55 - 50,000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Type-X Bundle 1Pair X-S65C 6.5" Component 1Pair X-S65 6.5" Coax X-A70F 700W and 4 Gauge Amp Kit
$1,999.99
$2,799.99
Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit
Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp and Wiring - This bundle includes a pair of Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers, a pair of Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way Speakers, an Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine X-S65C X-Series 6.5 Inch Component 2-Way SpeakersCTA-2031 Specifications: 120W RMS, 360W Peak, 4 Ohm
General Features:
6.5 X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount depth: 2-5/16"
Cutout Dimensions: 5-13/32"
4 ohms impedance
Frequency Response: 55 - 50,000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way SpeakersSPECIFICATIONSWoofer: 6-1/2" coneTweeter: 1" Carbon GraphiteMaximum Peak Power: 330 WattsMaximum RMS Power: 110 Wattsimpedance: 4 ohmsSensitivity: 89 dB SPL (1W @ 1m)Frequency Response: 55 Hz to 50 kHzMounting Depth/Drop-in Mounting: 2-5/16- (5.9cm)Cutout Diameter: 5-13/32- (13.7cm) circleRecommended Amplification: up to 110 watts RMS per channelWarning: Both products contain a high-performance tweeter. If there is a tweeter already installed in your car, then you must disconnect its terminals. If you leave the original tweeter connected and connect this product in parallel, then a fault may develop in this product, so you are strongly recommended not to do so.
Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:
Alpine X-Series X-A70F
Class-D Full Range 2 ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 120 watts x 4 Channel
2 ohms: 175 watts x 4 Channel
1 ohm: ------------N/A-----------
Bridged, 4 Ohms: 350 Watts X 2 Channel
Total power output: 700 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
4/3/2 channel operation
Speaker-level (high-level) inputs
Preamp Outputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .4 - 10V
Low level: .1 - 4V
Frequency Response: 10 - 60,000
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >106dB
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Variable subsonic filter: 50 - 40Hz, -24dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 35A x 3
4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What is in the X-A70M package:
4-Channel amplifier
Two 35A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
2 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
X-A70M owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov