Mixers & Consoles (170)

ART MX622BT 6-Channel Stereo Mixer with EQ & Bluetooth The MX622BT is a rackmount mixer with Bluetooth® connectivity, an effects loop, and onboard EQ. Channels 1 through 3 have stereo RCA inputs, and channel 3 also has an 1/8” stereo input on the front panel. Channels 4 through 6 have mono XLR inputs that are switchable between mic and line level, as well as switchable phantom power. The rear panel has balanced 1/4” and stereo RCA outputs. Each input has a dedicated level control, and you can enhance your mix with the master 2-band EQ and switchable effects loop to integrate external signal processing. You can also use the effect return jacks as an additional stereo input controlled by the Effects Level knob. It’s particularly well-suited for retail, restaurant, corporate, or academic settings that need to combine wired and wireless A/V sources with up to three microphones, but its versatile features and range of connections make the MX622BT easy to integrate in almost any audio application. General Features: Bluetooth 5.0 receiver Three balanced XLR inputs with separate Mic/Line switch, Level control and Clip Indicator Three pairs of RCA stereo inputs with separate Level controls Selectable 15 Volt Phantom power for each Mic channel Balanced 1/4-inch TRS Main outputs with Master Level control Versatile Bass and Treble equalization on Main outputs Front TRS stereo 1/8-inch Input jack Stereo Record Out RCA jacks Effects Loop with Effects Level control and In/Out switch 1/4-inch Effects Send with stereo Returns Internal power supply Solid metal case Specifications: Inputs 3x XLR balanced2x 1/4" unbalanced6x RCA1x 1/8" balanced Outputs 2x 1/4" TRS balanced1x 1/4" unbalanced2x RCA Input Impedance 600/22K Ω Mic/Line XLR inputs, 10K Ω RCA inputs, 22K , 1/4" EFX Returns Output Impedance 50 Ω 1/4" Main outputs, 1 K Ω RCA Record outputs, 100Ω EFX output Maximum Input Level -10 dBu/+20 dBu Mic/Line XLR inputs, +20 dBu RCA line inputs, +20 dBu EFX inputs Maximum Output Level +24 dBu balanced Main outputs, +20 dBu RCA Record outputs, +20 dBu EFX output Maximum Gain 56 dB / 26 dB Mic/Line, 26 dB RCA inputs Total Harmonic Distortion <1% typical Signal to Noise Ratio >90 dB typical Phantom Power +15 Volts DC, regulated low noise Connectivity Bluetooth: v5.0, up to 30M range, Class 2 device Power Requirements 105 to 125 VAC / 50 Hz - 60 Hz, 15 W typical. Export units configured for country of destination Dimensions (HWD) 1.75" x 19.0" x 6.0" (4.45 cm x 48.3 cm x 15.2 cm Weight 6.2 lbs. / 2.8kg **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Onyx12 12 Channel Premium Audio Mixer with Multitrack USB The Mackie Onyx12 is a 12 Channel Premium Analog DJ Mixer with Multitrack USB and Provide Incredible sound quality, multitrack recording, and professional built-in effects make Onyx Premium Analog Mixers with USB the ultimate compact, affordable solution for live audio, home recording, and content creation. Onyx Mic Preamps Our award-winning Onyx Mic Preamps are designed for maximum studio-quality performance. Ultra-low noise and up to 60dB of gain means tons of headroom and crystal-clear sound even with gain-hungry mics. 24-Bit / 96khz Multitrack Recording Connect to your Mac or PC via USB and get full multitrack recording into your favorite DAW at up to 24-Bit / 96kHz. Don't have any software? No worries, each mixer includes 2 massive software bundles to get you started. You can even insert an SD card and record your stereo mix directly to it. Perkins Eq This innovative circuitry is a 3-band design based on a classic "British EQ" from mixing desks of the '60s and '70s. What makes the Perkins EQ unique is that sweet "British console" sound but with greater filter control and minimum phase shift. The semi-parametric midrange allows for precise targeting of a specific frequency range and maximum creative control. Built-In Fx Add the finishing touch with professional built-in effects. A dedicated EQ allows for powerful tonal control. Select, modify, and save your favorite sounds via the full-color display.  Studio Command This powerful and intuitive full-color display and single-knob interface deliver ultimate control over effects, presets, and more. With an SD card in the slot, you can record a stereo mix and playback music direct to/from the card, all controlled via Studio Command. Bluetooth Streaming Pair any Bluetooth-enabled device and stream audio directly into a channel. This makes listening to reference tracks, break music, and more a piece of cake. Product Specifications: Type: Analog Mixer Channels: 12 Inputs Mic Preamps: 8 x XLR Phantom Power: Yes Inserts: 4 x 1/4" Headphones: 1 x 1/4" USB: 1 x Type B Bluetooth: Yes EQ Bands: 4-band EQ Effects: Yes Storage: SD card slot Height: 5.4" Width: 14.8" Depth: 14" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA MIX600 Ultra Low-Noise 6-Channel Line Mixer Stereo/Single Track Switch Microphone The MR DJ MIX600 mixer is designed to collect and combine audio signals from multiple sources, including guitars, basses, and keyboards, for monitoring or signal routing. Each channel features an independent input connection and individual level control, allowing precise adjustment of each source. All channels are summed into a single output, providing a clean and efficient signal path to the amplifier. The mixer enables multiple channels to be blended into one track, making it an ideal solution for keyboard rigs, small stage setups, drum kits, and submixing applications. Input Level control for each channel. High-quality components and exceptionally rugged construction. Highest quality even at maximum output level. The digital mixer now uses the latest 5V power supply mode, so it no longer limits application scenarios. Material: metal Channel: channel 6 Power supply: DC 5V Versatile and simple controls: The mixer collects sounds from many different sources (guitars, basses, and keyboards) to monitor positions for monitoring or routing Each channel on the line mixer has independent volume controls, independent input plugs, and volume controls for each channel, and a single output from the amplifier Mix multiple channels into a single track, perfect for your keyboard, small stage setup, drum kit, or submix The mini mixer produces good sound quality at all output levels, has ultra-low noise operability, and delivers excellent audio performance Distortion-free and easy to set up, ideal for mixing six line-level signals quickly and without complexity Dimensions: approx. 14.5 x 7.4 x 3.3 cm Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie 402VLZ4, 4-channel Ultra Compact Mixer with High-Quality Onyx Preamps A legend in compact mixer design, performance, and durability, Mackie VLZ is the original no-nonsense mixer series. Offering more bang for your buck, the redesigned VLZ4 line now includes Mackie's industry-proven Onyx preamps for crystal-clear sonic clarity. The comprehensive VLZ4 line delivers the proven feature set, high-headroom/low-noise design, and "Built-Like-A-Tank" construction that have defined the industry for over 20 years. From every input to every output, VLZ4 is optimized to deliver professional-quality results every time. Maximum Usability The new VLZ4s feature a sleek black powder coat finish and cockpit-inspired controls. Colorful high-contrast knobs optimize the VLZ4's usability in low-light scenarios and feature a radical, ergonomic taper that provides all the tactile control you need, all while keeping the mixer footprint as small as possible. Built Like A Tank Mackie VLZ4 mixers are indeed "Built Like A Tank." To show that the VLZ4 is made to keep on working no matter what gets thrown at it. Features such as a nearly indestructible steel wraparound chassis and grime-resistant rotary-sealed pots make the Mackie VLZ4 mixer a solid investment. General Features: Amazingly rugged analog mixer with three microphone preamplifiers and three stereo channels Onyx mic preamps offer up to 60dB of gain for excellent performance with any mic. Ultra-low-noise performance gives you clean, clear sound High-resolution stereo meters give you a fast, easy visual indication of your signal levels Sealed rotary controls resist dust and grime Type: Analog Channels: 4 Inputs - Mic Preamps: 2 x XLR Phantom Power: 2 Inputs - Line: 2 x 1/4" (CH 1-2), 2 x 1/4" (CH 3-4Stereo), 2 x RCA (Tape) Inputs - Other: 2 x Stereo (RCA) Outputs - Main: 1 x XLR, 1 x 1/4" Outputs - Other: 2 x RCA (Tape), 2 x 1/4" (Alt), 2 x 1/4" (Control Room) Aux Sends: 1 x Pre/Post Send/Return I/O: 1 x 1/4" (Send), 2 x 1/4" (Return) Buses/Groups: Alt 3-4 Channel Inserts: Yes (CH 1-2) Headphones: 1 x 1/4" EQ Bands: 2-band Height: 1.6" Width: 5.8" Depth: 7.3" Weight: 3 lbs. Manufacturer Part Number: 2040768-00 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Mackie ProFX16v3 16-channel Mixer with USB and Effects + Rackmount Kit Looking for a mixer that makes your life easier when you're gigging? The Mackie ProFX16v3 16-channel USB mixer can do that and much, much more. The ProFX16v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with 11 Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. Once you're ready to go, you can use the onboard GigFX to add that little something extra to your mix. No matter if you're onstage or in your studio, the Mackie ProFX16v3 will always give you excellent audio quality. Now with Onyx mic preamps that offer 60db of headroom, 24 built-in FX, and more. Record your tracks in 24-Bit/192kHz quality with 2x4 USB I/O and zero-latency hardware monitoring. Both Pro Tools and Waveform recording software/plug-in packages are included. Legendary performance for stage, studio, and beyond – ProFXv3 Series Mixers. General Features: GigFX effects engine delivers 24 effects, including reverbs, delays, and choruses 11 Mackie Onyx mic preamps deliver a clear signal and 60dB of gain Rugged design will stand up to the wear and tear of the road 3 Band EQ and 100Hz low-cut filter on all channels Built-in channel compression 48-volt phantom power on all mic channels 24-bit/192kHz A/D for unmatched audio quality USB for playing music and recording into your computer Balanced XLR and balanced/unbalanced outputs The headphone output has a separate volume control for comfortable monitoring Weight: 15.2 lbs. Height: 4.4" Width:17.7" Depth: 17.1" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVI8500 All-In-One 8-Channel Powered Mixer + 2 MR DJ 12' Speakon to 1/4" Speaker Cables The Peavey PVi 8500 /PV 8500 is a revolutionary all-in-one powered mixer with everything a musician needs: up to eight combination XLR and 1/4" inputs using Peavey's award-winning mic preamps, and 400 watts of peak power for crystal-clear audio reproduction. The Peavey PVi 8500 / PV8500 uses exclusive features like Mid Morph to accurately help improve the tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's nine-band graphic EQ combined with our revolutionary FLS Feedback Locating System. The PVi 8500 / PV8500 is equipped with Peavey's exclusive Kosmos-C technology, which drastically enhances both the low and high ends of the audio spectrum. Footswitchable, built-in 24-bit digital effects complement the already feature-packed unit. Connect virtually any music device to this versatile mixer via the onboard 1/4", RCA, and 1/8" mini jacks. General Features: Powered mixer with 200W (RMS at 4-ohms) per output channel Eight-channel design with ultra-clean Silencer microphone preamplifiers A Feedback Locating System makes it easy to fight onstage feedback 9-band Graphic EQ helps you tune your system to any room Mid-Morph EQ makes it fast and easy to dial in a great vocal sound Built-in 24-bit effects processing with footswitchable mute Kosmos-C audio enhancement module lets you add punch and clarity to dull signals Supports SD Card/USB flash drive audio playback Bluetooth wireless audio streaming for portable Bluetooth music players Weight Unpacked: 23.02 lb(10.44 kg) Weight Packed: 26.01 lb(11.8 kg) Width Packed: 14"(35.56 cm) Height Packed: 22"(55.88 cm) Depth Packed: 13.75"(34.925 cm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVI8500 All-In-One 8-Channel Powered Mixer The Peavey PVi 8500 /PV 8500 is a revolutionary all-in-one powered mixer with everything a musician needs: up to eight combination XLR and 1/4" inputs using Peavey's award-winning mic preamps, and 400 watts of peak power for crystal-clear audio reproduction. The Peavey PVi 8500 / PV8500 uses exclusive features like Mid Morph to help improve the tone and clarity of vocals accurately. Feedback is quickly and easily identified and removed with Peavey's nine-band graphic EQ combined with our revolutionary FLS Feedback Locating System. The PVi 8500 / PV8500 is equipped with Peavey's exclusive Kosmos-C technology, which drastically enhances both the low and high ends of the audio spectrum. Footswitchable, built-in 24-bit digital effects complement the already feature-packed unit. Connect virtually any music device to this versatile mixer via the onboard 1/4", RCA, and 1/8" mini jacks. General Features: Powered mixer with 200W (RMS at 4-ohms) per output channel Eight-channel design with ultra-clean Silencer microphone preamplifiers A Feedback Locating System makes it easy to fight onstage feedback 9-band Graphic EQ helps you tune your system to any room Mid-Morph EQ makes it fast and easy to dial in a great vocal sound Built-in 24-bit effects processing with footswitchable mute Kosmos-C audio enhancement module lets you add punch and clarity to dull signals Supports SD Card/USB flash drive audio playback Bluetooth wireless audio streaming for portable Bluetooth music players Weight Unpacked: 23.02 lb(10.44 kg) Weight Packed: 26.01 lb(11.8 kg) Width Packed: 14"(35.56 cm) Height Packed: 22"(55.88 cm) Depth Packed: 13.75"(34.925 cm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie DL32S 32-channel Rackmount Digital Mixer Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It's a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would've needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers! General Features: Ample I/O including 32 stereo-linkable input channels, 10 fully assignable XLR outputs, 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output 16 input channels are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs 32 recallable Onyx+ mic preamps deliver top-notch sound Wireless mixing allows you to take control of your mix via an iPad Tweak your mix, processing, and routing from anywhere in the venue Built-in Wi-Fi networking and instant recall ensure easy setup Supports up to 20 iPads at once to accommodate multiple engineers 4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes 32-in/32-out USB interface for recording straight to your DAW Play intermission music, backing tracks, and more Play back your full multitrack recording for a virtual sound check Use your DAW's audio plug-ins in a live environment Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVi 6500 6-channel 400W Powered Mixer Amplifier with Bluetooth, 6 Inputs, Built-in FX, 9-band Graphic EQ, Aux Audio Input, and SD Card/USB Audio Playback & PV 20' Mic Cable The Peavey PVi 6500 is a revolutionary all-in-one powered mixer. It provides everything a musician needs, including up to six simultaneous combinations of XLR and 1/4" inputs. It uses Peavey's award-winning Silencer mic preamps and 400 watts of power for crystal-clear audio reproduction. The Peavey PVi 6500 also features exclusive options, such as Mid Morph EQ, to help accurately enhance the tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's 9-band graphic EQ, combined with our revolutionary FLS Feedback Locating System. The PVi 6500 is equipped with Kosmos, drastically enhancing the audio spectrum's low and high ends. It is exclusively Peavey technology. Footswitchable, built-in 24-bit digital effects complement the already feature-packed unit by allowing users to select multiple varieties of reverb and delay. The onboard 1/4", RCA, and 1/8" mini jacks connect almost anything to this versatile mixer. General Features: FLS Feedback Locating System Footswitchable effects defeat Combination XLR and 1/4" input jacks RCA, 1/8" media input Selectable 9-band graphic EQ with FLS Selectable Main or Monitor dual power section RCA Record outputs Onboard 24-bit digital effects with a mute button Clip light and signal present indicator Main line level 1/4" output Speaker protection circuit 48-volt phantom power Bluetooth streaming audio Width Packed: 14"(35.56 cm) Height Packed: 19.75"(50.165 cm) Depth Packed: 13"(33.02 cm) Weight Unpacked: 20.02 lb(9.08 kg) Weight Packed: 22.29 lb(10.11 kg) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.