00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey PV 14 BT 120US Compact 14 Channel Mixer with Bluetooth
$499.99
$695.03
Peavey PV 14 BT 120US Compact 14 Channel Mixer with Bluetooth
The Peavey PV 14 BT 120US includes 8 channels of reference quality mic preamps, 8 direct outputs for recording, a stereo channel, media channel with Bluetooth wireless input, high quality digital effects with LCD display, streaming USB out, MP3 playback via USB A input, Peavey's exclusive Kosmos audio enhancement, 48-volt phantom power, dual selectable control room outputs, 4 channels of compression, one channel of on board selectable guitar preamp, 3-band EQ per channel with bypass, channel mute buttons, aux send, signal clip indicators, and a stereo master LED meter bridge. This amazingly versatile mixer is at home in both the studio and live applications.
Modern features such as Bluetooth allow seamless connection to almost any "smart" device. 8 direct outs allow easy connection to most DAW interfaces for recording. In addition, the PV 14 BT can stream audio directly to a PC. MP3 playback is also available, just plug a flash drive with MP3 files on it into the USB-A port and use the LCD to select and play back music.
The PV series Solo feature allows the user to listen to individual channels via headphones or control room outputs, and the EQ bypass lets the user hear and compare the EQ'd signal to the original signal with the push of a button. 4 channels of compression keep signals with difficult levels under control, and Peavey's exclusive guitar shape adjusts the EQ and preamp specifically for guitar. Hi-pass filters on every channel remove unwanted rumble and noise, and balanced AUX and Master outputs ensure a clean, noise-free signal to your powered speakers or power amplifier.
General Features:
Versatile mixer for your desktop recording and live sound needs
Bluetooth connectivity is great for podcasting and other applications
The LCD display lets you monitor your work
Selectable hi-Z preamp designed for electric guitar input
4-channel built-in compression is not normally found on analog mixers
3-band EQ with bypass switches
Phantom power for your devices that require it
USB-B in and out directly connects to your computer
Kosmos-C bass and treble enhancement
Channels: 14
Computer Connectivity: USB (stereo in/out)
Faders: 2 x 60mm Main Mix (left, right)
Inputs - Mic Preamps: 8 x XLR-1/4" combo
Inputs - Line: 4 x 1/4" (stereo paired), 2 x RCA (stereo), 1 x 1/8" TRS (aux in)
Outputs - Main: 2 x XLR, 2 x 1/4", 4 x RCA (stereo paired)
Aux Sends: 1 x 1/4", 1 x XLR
Send/Return I/O: 8 x 1/4" (direct out)
Headphones: 1 x 1/4"
USB: 1 x USB Type B, 1 x USB Type A
Bluetooth: 3.0 (stereo in)
EQ Bands: 3-band
Effects: Yes
Width Packed: 18.7"(47.498 cm)
Height Packed: 20.47"(51.9938 cm)
Depth Packed: 3.54"(8.9916 cm)
Weight Unpacked: 10.0 lbs(4.53 kg)
Weight Packed: 13.23 lbs(6 kg)
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey PV6BT Pro Audio Mixer Bluetooth Effects + 3 MSP-1 1/4" Microphone Stand package
$449.99
Package: Peavey PV 6BT PV6BT Pro Audio Mixer With 2 Mic Inputs, Bluetooth, USB, Compressor/Effects 2 Combo XLRs, and 3 Band EQ + 3 Peavey MSP-1 1/4" Microphone and Stand package
Peavey PV 6 BT 6 Channel Compact Mixing Mixer Console with Bluetooth
Equipped with Peavey's reference-quality mic preamps that spec in at an incredible 0.0007% THD, the PV 6 BT mixer is excellent for live or recording applications. The PV 6 BT mixer includes 2 channels of reference-quality mic preamps, 2 direct recording outputs, a stereo input channel, a dedicated media channel, and Bluetooth wireless...
General Features:
2 combination XLR/1/4" low noise mic preamps
3-band EQ on all channels
2 channels of Peavey's exclusive MidMorph®
EQ bypass per channel
Global 48V phantom power
Rugged console design
Built-in compression
Stereo pan control per channel
1/4" main stereo outputs
LED clip and signal present indication
High-quality master LED meter bridge
Equipped with Bluetooth® wireless connectivity, Bluetooth 3.0 + EDR, A2DP
Studio-quality headphone output
Stereo 1/4", RCA, or 3.5mm input channel
Dual selectable control room outputs
Peavey's exclusive on-board Hi-Z guitar input
2 channels of direct out
New slim, low-profile design
Stereo USB-B streaming audio in and out, 16-bit, up to 48kHz sample rates
Convenient tablet cradle
On-board studio-quality digital effects with individual channel control
Type: Analog
Channels: 6
Inputs - Mic Preamps: 2 x XLR/TRS Combo
Inputs - Line: 4 x 1/4", 1 x 1/8"
Inputs - Other: 1 x Stereo
Outputs - Main: 2 x 1/4"
Outputs - Direct: 2 x 1/4"
Outputs - Other: 2 x Stereo
Headphones: 1 x 1/4"
Phantom Power: 2
EQ Bands: 3-band
Effects: Yes
Computer Connectivity: 1 x USB, Bluetooth
Weight: 7 lbs.
UPC: 014367646351
Peavey PV MSP1 Complete Microphone with Stand Kit - 1/4" Cable Included
The PV® MSP1 features Peavey's performance-ready PV®i 100 dynamic cardioid microphone, which can be switched off when not in use, as well as a fully adjustable, tripod-style boom stand that works equally well for vocals, acoustic guitars, amplifiers, drums, and other instruments.The package also includes an XLR-to-XLR or XLR-to-XLR cable, a mic stand clip, and a protective nylon mic bag. A durable, zippered gig bag allows users to transport their entire microphone setups from rehearsal to the stage.
General Features:
Also available with a XLR cable
Convenient nylon carry bag
Mic clip
6-meter microphone cable
Black powder-coat finish tripod microphone stand with boom arm
Designed for stand-mount application
Includes PV®i 100 dynamic cardioid microphone
Complete microphone/microphone stand package
Packed Weight: 7.06 lb (3.2 kg)
Packed Length: 35.75" (90.81 cm)
Packed Width: 5" (12.7 cm)
Packed Height: 4" (10.16 cm)
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey PV6BT Pro Audio Mixer Bluetooth Effects + 3 MSP-1 XLR Microphone Stand package
$449.99
Package: Peavey PV 6BT PV6BT Pro Audio Mixer With 2 Mic Inputs, Bluetooth, USB, Compressor/Effects 2 Combo XLRs, and 3 Band EQ + 3 Peavey MSP-1 XLR Microphone and Stand package
Peavey PV 6 BT 6 Channel Compact Mixing Mixer Console with Bluetooth
Equipped with Peavey's reference-quality mic preamps that spec in at an incredible 0.0007% THD, the PV 6 BT mixer is excellent for live or recording applications. The PV 6 BT mixer includes 2 channels of reference-quality mic preamps, 2 direct recording outputs, a stereo input channel, a dedicated media channel, and Bluetooth wireless...
General Features:
2 combination XLR/1/4" low noise mic preamps
3-band EQ on all channels
2 channels of Peavey's exclusive MidMorph®
EQ bypass per channel
Global 48V phantom power
Rugged console design
Built-in compression
Stereo pan control per channel
1/4" main stereo outputs
LED clip and signal present indication
High-quality master LED meter bridge
Equipped with Bluetooth® wireless connectivity, Bluetooth 3.0 + EDR, A2DP
Studio-quality headphone output
Stereo 1/4", RCA, or 3.5mm input channel
Dual selectable control room outputs
Peavey's exclusive on-board Hi-Z guitar input
2 channels of direct out
New slim, low-profile design
Stereo USB-B streaming audio in and out, 16-bit, up to 48kHz sample rates
Convenient tablet cradle
On-board studio-quality digital effects with individual channel control
Type: Analog
Channels: 6
Inputs - Mic Preamps: 2 x XLR/TRS Combo
Inputs - Line: 4 x 1/4", 1 x 1/8"
Inputs - Other: 1 x Stereo
Outputs - Main: 2 x 1/4"
Outputs - Direct: 2 x 1/4"
Outputs - Other: 2 x Stereo
Headphones: 1 x 1/4"
Phantom Power: 2
EQ Bands: 3-band
Effects: Yes
Computer Connectivity: 1 x USB, Bluetooth
Weight: 7 lbs.
UPC: 014367646351
Peavey PV MSP1 Complete Microphone with Stand Kit - XLR Cable Included
The PV® MSP1 features Peavey's performance-ready PV®i 100 dynamic cardioid microphone, which can be switched off when not in use, as well as a fully adjustable, tripod-style boom stand that works equally well for vocals, acoustic guitars, amplifiers, drums, and other instruments.The package also includes an XLR-to-XLR or XLR-to-XLR cable, a mic stand clip, and a protective nylon mic bag. A durable, zippered gig bag allows users to transport their entire microphone setups from rehearsal to the stage.
General Features:
Also available with a 1/4" cable
Convenient nylon carry bag
Mic clip
6-meter microphone cable
Black powder-coat finish tripod microphone stand with boom arm
Designed for stand-mount application
Includes PV®i 100 dynamic cardioid microphone
Complete microphone/microphone stand package
Packed Weight: 7.06 lb (3.2 kg)
Packed Length: 35.75" (90.81 cm)
Packed Width: 5" (12.7 cm)
Packed Height: 4" (10.16 cm)
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey PV 6 BT Compact Mixer 6 Channel with Bluetooth
$249.99
Peavey PV 6 BT 6 Channel Compact Mixing Mixer Console with Bluetooth
Equipped with Peavey's reference-quality mic preamps that spec in at an incredible 0.0007% THD, the PV 6 BT mixer is excellent for live or recording applications. The PV 6 BT mixer includes 2 channels of reference-quality mic preamps, 2 direct recording outputs, a stereo input channel, a dedicated media channel, and Bluetooth wireless...
General Features:
2 combination XLR/1/4" low noise mic preamps
3-band EQ on all channels
2 channels of Peavey's exclusive MidMorph®
EQ bypass per channel
Global 48V phantom power
Rugged console design
Built-in compression
Stereo pan control per channel
1/4" main stereo outputs
LED clip and signal present indication
High-quality master LED meter bridge
Equipped with Bluetooth® wireless connectivity, Bluetooth 3.0 + EDR, A2DP
Studio-quality headphone output
Stereo 1/4", RCA, or 3.5mm input channel
Dual selectable control room outputs
Peavey's exclusive on-board Hi-Z guitar input
2 channels of direct out
New slim, low-profile design
Stereo USB-B streaming audio in and out, 16-bit, up to 48kHz sample rates
Convenient tablet cradle
On-board studio-quality digital effects with individual channel control
Type: Analog
Channels: 6
Inputs - Mic Preamps: 2 x XLR/TRS Combo
Inputs - Line: 4 x 1/4", 1 x 1/8"
Inputs - Other: 1 x Stereo
Outputs - Main: 2 x 1/4"
Outputs - Direct: 2 x 1/4"
Outputs - Other: 2 x Stereo
Headphones: 1 x 1/4"
Phantom Power: 2
EQ Bands: 3-band
Effects: Yes
Computer Connectivity: 1 x USB, Bluetooth
Weight: 7 lbs.
UPC: 014367646351
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Reloop PTB-2 2+1-channel DJ Mixer
$319.99
Reloop PTB-2 2+1-channel DJ Mixer
Across analog, digital, and hybrid sets, the Reloop PTB-2 maximizes flexibility without sacrificing quality or creativity. The DVS-supporting 2+1-channel mixer comes equipped with an assortment of multimode set supports, from plug-and-play Algoriddim djay Pro DVS — unlocked with purchase — compatibility, to an immensely versatile 45mm Ultraglide crossfader, a dedicated Bluetooth-optional Aux channel, and extensive USB-C audio-interfacing functionality. The PTB-2’s streamlined, ergonomic interfacing features detailed control knobs that deliver satisfying tactility, ensuring every tweak and turn of the per-channel Gain, 2-band EQ, or bipolar filters is achieved with exacting precision. For Sweetwater’s traveling DJs, the Reloop PTB-2s’ most valuable function is its multimode support — selectable smart device, computer, Bluetooth, USB audio, phono, and line-level DVS are all on tap. And with its preeminently portable form factor, this multifaced mobility-minded mixer is guaranteed to upgrade your any-style setup.
Crafted to Connect With Virtually Any Arrangement:
Across the Reloop PTB-2’s versatile I/O suite, myriad DJ styles and performance preferences are supported without compromising its travel-friendly portability. Stereo-paired RCA connections for its dual-channel architecture join an RCA Main output, alongside 3.5mm Recording and Auxiliary inputs and outputs, respectively. Moreover, the PTB-2’s Auxiliary function pulls double duty with its integrated Bluetooth compatibility, unlocking an array of wireless options that expand your DJ set-crafting aperture. And for those looking to go full analog, a rear-mounted ground terminal and 3-way Line, Phono, and USB/DVS switch give you all the flexibility you need. Conversely, dual USB-C ports provide direct power and polyfunctional smart-device/computer support, as well as the ability to transform your PTB-2 into a 4-in, 4-out audio interface.
General Features:
2+1-ch. DJ mixer with voltaic mixing power and uncompromising versatility in a durable, travel-friendly chassis
Onboard DVS support allows for extensive multi-medium mixing, unlocking Algoriddim djay Pro DVS with purchase
Dual-function Aux channel supports selectable 3.5mm audio input and wireless Bluetooth streaming
45mm Ultraglide crossfader features a continuously adjustable curve control and instant crossfade-reverse switch to suit your mixing style
Ergonomic, intuitive interface marries satisfying tactility with precise hands-on control over per-channel Gain, 2-band EQ, and bipolar Filter parameters
LED-backed VU meters provide essential visual feedback without disrupting your mixing process
Plug-and-play USB-C connectivity supports smart device audio sources and fully-fledged use as 4-in/4-out audio interface
Rear-placed Ground terminal accommodates analog devices
Tech Specs:
Channels: 2+1-channel
Audio Interface: 4x4 USB DVS
Signal Processing: 2 x LPF/HPF Knobs
Analog Inputs: 2 x Dual RCA Stereo (line/phono switchable), 1 x 1/8" (aux)
Analog Outputs: 1 x Dual RCA Stereo (main), 1 x 1/8" (rec)
Headphones: 1 x 1/8" TRS (front)
USB: 2 x USB-C (host, power)
Bluetooth: Yes
Computer Connectivity: 4x4 USB-C DVS
Crossfader: 45mm Ultra Glide Crossfader
EQs: 2-band: Treble, Bass
Software: Djay PRo DVS
Power Source: USB Powered (C-to-C cable included)
Height: 2.36"
Width: 4.13"
Depth: 7.87"
Manufacturer Part Number: AMS-PTB-2
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART SPLITMIX4 4-Channel Splitter/Mixer
$99.99
ART SPLITMIX4 4-Channel Splitter/Mixer
“Its simplicity and relatively low cost belies the genius of its design. Highly recommended.” - Sound On Sound
The SplitMix4 is a four-channel line mixer, splitter, and level attenuator with a versatile hybrid design. Split one input to four outputs. Mix four inputs to one output. Send four stereo sources to their own stereo outputs with independent level controls. Or do any combination of the above.
The fully passive design means that there is no active circuitry to add noise or distortion, and that no power is required.
All connections are 1/4” stereo TRS with intelligent switching. Plugging into a mix input removes the channel from the splitter bus, and plugging into a splitter output removes the channel from the mix bus. Mono or stereo operation is determined by the cable you connect.
Compact, rugged, and highly adaptable, the SplitMix4 will get your signals wherever they need to go on stage or in the studio.
General Features:
Four Stereo Input Channels
Stereo Output
Independent stereo level controls are provided on each channel
Passive Design (No Power Supply Required)
Over 90dB of Attenuation
Specifications:
Inputs
1/4" TRS stereo
Outputs
1/4" TRS stereo
Input Impedance
25 k -100k Ω
Output Impedance
1 k – 4 k Ω
Frequency Response
20 Hz – 20k Hz, +/-1dB
Total Harmonic Distortion
<0.005% @ 1 kHz (typical)
Channel Separation
> 90dB (typical)
Power Requirements
Fully Passive
Dimensions (HWD)
1.85″ x 4.6″ x 4.1″ (4.7 cm x 11.7 cm x 10.4 cm)
Weight
0.84 lbs / 0.38 kg
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART PROMIX 3-Channel Battery / AC-Powered Mini Mixer
$189.99
ART PROMIX 3-Channel Battery / AC-Powered Mini Mixer
The ProMix is a three-channel microphone mixer designed for connecting multiple mics to a larger mixer that only has a single input available.
Each channel has an independent level control and switches to activate phantom power and a high-pass filter. The mixed signal is sent to a 1/4” headphone / auxiliary output and a balanced XLR line output.
For additional flexibility, it can be powered by the included adapter or two 9-volt batteries for mobile applications.
The ProMix is a compact, convenient solution that can be used on its own in smaller setups, or to extend the connectivity of a larger system.
General Features:
3x low-impedance XLR mic channels
3x level controls
3x phantom power on/off DIP switches
3x low-frequency cut on/off DIP switches
A low-impedance balanced XLR line output
Mono 1/4” Phones/Aux. output
Clip LED (fires 3 dB below the onset of clipping)
On/off Power switch,with LED
Power:12 V DC (Adapter included)
Output Phantom Power:12V (Using the 12V DC supply)
Optional 2 x 9V Battery Power (Yields 18V Phantom Power)Low Cut:-3dB @ 100Hz
Specifications:
Input Impedance
600 Ω
Output Impedance
600 Ω
Maximum Input Level
-14 dB
Maximum Output Level
+14 dB
Maximum Gain
+60 dB
Total Harmonic Distortion
0.0002
Phantom Power
12V DC
Power Requirements
12 V DC (adapter) / 2x 9V (batteries)
Dimensions (HWD)
5.63" x 3.75" x 1.75" (14.3 cm x 9.2 cm x 4.5 cm)
Weight
1.5lb / 6.8 kg)
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART PWRMIX-3 3-Channel Stereo Mini Mixer
$154.99
ART PWRMIX-3 3-Channel Stereo Mini Mixer
The PowerMix III is a three-channel line mixer.
Each channel has dual 1/4” inputs that can accept mono or stereo sources, and controls for level and panning. There’s a master level control for the main outputs, and a shared level control for the two headphone jacks.
It’s a compact mixing and submixing solution for synths, sound modules, media players, and other line sources.
General Features:
Three input channels each with their own pan and level controls
Three sets of 1/4” left and right unbalanced inputs
The Right inputs may be used for mono signals
A Master Level control regulates all 3 channels
Left and Right unbalanced 1/4” Outputs
The Headphone channel features dual, stereo 1/4” outputs so that two headsets can be connected at once
The Headphone Level control regulates both outputs
Specifications:
Inputs
1/4"
Outputs
1/4"
Input Impedance
10K Ω
Output Impedance
100 Ω
Maximum Input Level
+30 dB
Maximum Output Level
+13 dB
Maximum Gain
+27 dB
Total Harmonic Distortion
<0.005%
Power Requirements
12 V DC
Dimensions (HWD)
5.75" × 4.4" × 1.75" (14.6 cm x 11.2 cm x 4.4 cm)
Weight
2 lbs (0.9 kg)
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART MACROMIX 4-Channel Line Mixer
$109.99
ART MACROMIX 4-Channel Line Mixer
The MacroMix is a four-channel line mixer.
Channels 1 and 2 have stereo RCA inputs, channel 4 has a 1/4 input, and channel 3 has both. Its ideal for connecting multiple sources such as CD and DVD players, phono preamps and DJ mixers, or cassette decks.
Each channel has an independent volume control, and the mix is sent to a stereo RCA output and a stereo 1/4 headphone / line output for monitoring.
Perfect for unbalanced line signals and consumer A/V equipment, the MacroMix can be used as a standalone solution or to extend the connectivity of a larger mixer.
General Features:
Four input channels, Ch. 1 and 2 have dual L/R RCA inputs, with Ch. 3 you have a choice of one 1/4” or dual L/R RCA inputs and Ch 4 has a 1/4” unbalanced input
Four Level controls, one for each channel
Dual L/R RCA Output connectors
1/4” Line Out/Stereo Headphone output jack
Active preamplification and mixing circuitry
Specifications:
Inputs
1/4", RCA
Outputs
RCA
Input Impedance
10K Ω
Maximum Gain
+40 dB
Total Harmonic Distortion
<0.008%
Signal to Noise Ratio
> 90dB
Power Requirements
12 V DC
Dimensions (LWH)
5.625" × 3.75" × 1.75" (14.3 cm x 9.2 cm x 4.5 cm)
Weight
1.6 lbs (725 g)
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART MX822 8 Channel Stereo Rackmount Mixer
$279.99
ART MX822 8 Channel Stereo Rackmount Mixer
The MX822 is an eight-channel stereo mixer with an effects loop, and the most fully-featured rackmount line mixer from ART.
Each channel has dual 1/4” unbalanced inputs for mono or stereo sources, and channel 1 also has a microphone input with a balanced XLR connection and switchable phantom power.
All channels have signal and clipping indicators, as well as controls for level, pan, and EFX send. The master section has controls for the main and headphone output levels, as well as the EFX return and LED metering.
The main outputs use balanced XLR connectors, and multiple units can be chained together using the Main Expand and EFX Buss Link jacks.
Versatile, expandable, and with a fully stereo signal path, the MX822 is a powerful mixing solution for studio and stage use.
General Features:
Eight stereo/mono input channels with individual level, pan and effects send controls
External effects loop with independent send and return controls
Front panel 1/4-inch stereo (TRS) headphone jack with amplifier and independent level control for output monitoring
Switchable balanced microphone XLR or 1/4-inch inputs on Channel One
Switchable low noise +48V phantom power for microphone input
Separate green and red LED signal and clip indicators for each input channel
Six level left and right main output metering including clip indicators
Balanced left and right XLR main outputs
Multiple units may be chained together for additional inputs
Rugged 1U rack mount steel case
Specifications:
Inputs
XLR female balanced (Mic)1/4" TS unbalanced (Channels 1-8, Effects Return)1/4″ TRS stereo unbalanced (EFX Buss, Main Expand)
Outputs
XLR-M balanced (Main) >br>1/4″ TRS unbalanced (Effectss Send)1/4″ TRS stereo unbalanced (Monitor, Main Expand, Headphone)
Input Impedance
1k Ω (MIC), 5k Ω (Ch1-Ch8)
Output Impedance
<1k Ω (Main, balanced), <25 Ω (Headphone)
Maximum Input Level
-19dBu (MIC), +24dBu (Ch1-8)
Maximum Output Level
+24dBu (Main), +18dBu (Monitor, Effects Send)
Maximum Gain
+60dB (MIC), +14dB (Ch1-8)
Total Harmonic Distortion
<0.01% @ 1kHz
Signal to Noise Ratio
> 90dB typical (Ref 0dBu)
Phantom Power
Switch Selectable, +48V DC, filtered, current limited
Power Requirements
USA – 95 to 125 VAC, 50-60 HzExport units configured for country of destination
Dimensions (HWD)
1.75″ x 19″ x 6″ (4.5cm x 48.3cm x 15.2cm)
Weight
6.3 lbs / 2.95 kg
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART MX821S 8-Channel Personal Mixer Stereo
$254.99
ART MX821S 8-Channel Personal Mixer Stereo
The MX821S is an eight-channel stereo rackmount mixer.
Each channel has an XLR mic input with switchable phantom power, an unbalanced 1/4” line input, and independent level and pan controls. The line input can also be converted to a direct output by adjusting the internal jumpers.
The master level knob controls the balanced 1/4” outputs. There’s also a pre-fader output and aux input with stereo RCA connections for chaining multiple units together, adding an additional stereo source, or sending a mix to a recording device that is unaffected by master level changes in the room.
Simple, streamlined, and featuring the most mic preamps of any ART rack mixer, the MX821S can serve as a standalone solution or add connectivity to an existing system.
General Features:
Eight input channels with individual level and pan controls
Pan controls place each input mono signal anywhere in the output stereo image
Balanced microphone XLR or unbalanced 1/4-inch TS inputs on each channel Full
+48V low noise phantom power switchable for each microphone input
Balanced left and right 1/4-inch TRS main output jacks with master level control
Prefade Output jacks and Aux Bus Input jacks allow units to be chained to provide extra inputs
Each line input jack may be individually converted to a direct line output by means of
internal jumpers Rugged 1U rack-mount steel chassis with built-in power supply
Perfect for stage, studio and permanent installations
Specifications:
Inputs
XLR female balanced (Mic, channels 1-8)1/4" TS unbalanced (Line, channels 1-8)RCA unbalanced (Aux Bus In, Left and Right)
Outputs
1/4" TRS balanced (Main Outputs, Left and Right)RCA unbalanced (Prefade Out, Left and Right)
Input Impedance
2k Ω (Mic), 20k Ω (Line), 51k Ω (Aux Bus In)
Output Impedance
200 Ω (Main Outputs, balanced),100 Ω (Prefade Out)
Maximum Input Level
-4 dBu (Mic), +22 dBu (Line)
Maximum Output Level
+24 dBu (balanced), +18 dBu (unbalanced)
Maximum Gain
54 dB (Mic), 29 dB (Line)
Frequency Response
20 Hz – 20 kHz (+0, -1 dB) (CH 1-8 in, M
Total Harmonic Distortion
<0.01% @ 1 kHz, typical
Signal to Noise Ratio
>99dB typical (Ref 0dBu)
CMRR
>43 dB typical
Phantom Power
Switch Selectable, +48V DC (regulated and filtered), 7 mA current limiting per leg
Power Requirements
USA: 95-125 VAC, 50-60 Hz, <15W
Dimensions (HWD)
1.75″ x 19″ x 6″ (4.5cm x 48.3cm x 15.2cm)
Weight
6.3 lbs / 2.9 kg
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART MX624 6-Channel Rackmount Zone Mixer
$224.99
ART MX624 6-Channel Rackmount Zone Mixer
The MX624 is a six-channel mixer with two stereo zone outputs.
Each channel has stereo RCA line inputs, and channel 6 also has an 1/8” stereo input on the front panel. Channels 1, 2, and 3 also have XLR microphone inputs with switchable phantom power and 20 dB pads.
Channel 1 also has a switchable ducking feature that will reduce the volume of the other channels when signal is detected at the microphone input, so announcements can be heard clearly over background music.
All channels have independent level controls and can be assigned to either or both zones. Each zone has a level control, 2-band EQ, and balanced 1/4” outputs.
The MX624 is ideal for sharing multiple mics and playback sources between two spaces.
General Features:
Six stereo input channels with individual level controls
Balanced mono microphone XLRs available on the first three channels
Selectable padding on mic inputs
Full +48V low-noise phantom power independently switchable for each mic input
First channel provides switchable ducking of other channels with selectable parameters
Front panel 1/8-inch stereo (TRS) mini-phone plug for portable music player input
Two sets of left and right 1/4-inch TS main output jacks with master level, bass and treble controls
Two bus input 1/4-inch TRS jacks allow units to be chained to provide extra inputs
Rugged 1U rack-mount steel chassis with built-in power supply
Specifications:
Inputs
XLR female balanced (Mic, channels 1-3)RCA unbalanced (Line Inputs 1-6, Left & Right)1/4" TRS unbalanced stereo (Bus Inputs, Zone 1 & 2)
Outputs
1/4" TS unbalanced (Zone 1 & 2 Out, Left & Right)
Input Impedance
4k Ω (Mic), 10k Ω (Line), 10k Ω (Bus)
Output Impedance
200 Ω (Zone 1 & 2)
Maximum Input Level
-4 dBu, +16 dBu with 20 dB pad (Mic), >25 dBu (Line)
Maximum Output Level
+20 dBu (unbalanced)
Maximum Gain
57 dB (Mic), 31 dB (Line)
Frequency Response
20 Hz – 20 kHz (+0, -1 dB) (channels 1-6 in, zone out)
Total Harmonic Distortion
<0.01% @ 1 kHz, typical
Signal to Noise Ratio
>90 dB typical (Ref 0dBu)
CMRR
>43 dB typical
Phantom Power
Switch selectable, +48V DC (regulated and filtered), 7 mA current limiting per leg
Power Requirements
USA: 85-125 VAC, 50-60 Hz, <15WExport units configured for country of destination
Dimensions (HWD)
1.75″ x 19″ x 6″ (4.45 cm x 48.3 cm x 15.2cm)
Weight
4.9 lbs / 2.2 kg
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.