Hot Deals | Absolute Pro Music – Page 51

ORION XTR XTP8 – 8” Tuned Port Loaded Enclosure Subwoofer $159.95 $399.99

ORION XTR XTP8 – 8” Tuned Port Loaded Enclosure Subwoofer More Air, More Bass – The Ultimate 8-Inch Vented Enclosure Subwoofer When you’re ready to take your bass response to the next level, the Orion XTP8 delivers. Designed for compact yet commanding bass output, this 8-inch vented enclosure subwoofer is built for enthusiasts who want clean, deep low-end power without sacrificing cargo or cabin space. With a tuned, ported design, robust internal bracing, and premium connection components, the XTP8 transforms any audio system with impactful, resonant bass. Ported for Maximum Punch The vented design of the XTP8 allows for increased airflow and reduced compression, ensuring louder, lower, and more accurate bass response. Internally braced corners eliminate standing waves and unwanted resonance, producing a smoother sound curve while reinforcing the enclosure’s durability. Built-In Protection with Smart Connectivity Whether you’re running daily or hitting hard on the weekends, the integrated woofer grille keeps your driver protected from impact without compromising sound quality. Spring-loaded nickel-plated terminals make wiring secure and efficient while preventing corrosion over time—ideal for daily drivers and demo builds alike. Key Features • Tuned Ported Enclosure – Provides superior air movement and deeper bass output with improved efficiency over sealed boxes. • Protective Subwoofer Grille – Guards the cone from physical damage while keeping airflow and output performance intact. • Spring-Loaded Nickel-Plated Terminals – Reliable, secure, and easy-to-install wire connections with long-term durability. • Internally Cornered Bracing – Reduces internal wave distortion and rattling, enhancing sound quality and enclosure strength. • Slim and Strong Form Factor – Designed to deliver high-output bass while fitting neatly in compact or unconventional spaces. General Features: Subwoofer Size: 8” (Inches) Enclosure Type: Vented (Ported) Power Handling (RMS): 300 Watts Power Handling (Peak): 1200 Watts Nominal Impedance: 4 Ohms Frequency Response: 27Hz – 200Hz Height: 5” Depth: 11.5” Width: 19” Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-66% sale

ORION XTR XTP6 – 6.5” Tuned Port Loaded Enclosure Subwoofer

00
DAYS 00
HRS 00
MIN 00
SEC

ORION XTR XTP6 – 6.5” Tuned Port Loaded Enclosure Subwoofer $139.95 $399.99

ORION XTR XTP6 – 6.5” Tuned Port Loaded Enclosure Subwoofer Compact Size, Deep Bass – The Ultimate 6.5-Inch Vented Enclosure Subwoofer If you’re looking for serious bass performance in a compact footprint, the Orion XTP6 is your go-to solution. Designed with precision engineering, this 6.5-inch vented enclosure subwoofer is perfect for vehicles where space is limited but powerful bass is a must. With a rugged enclosure, precision tuning, and performance-focused features, the XTP6 delivers tight, punchy low-end frequencies that bring your audio system to life. Built for Performance in Tight Spaces The XTP6 is built around a high-efficiency ported design, allowing air to move freely through the enclosure to maximize bass output and clarity. Internally cornered bracing helps reduce unwanted noise and standing waves, while the compact dimensions make installation possible in tight or hidden locations like under seats or in small trunks. Protection and Precision Engineering Equipped with a protective grille, the subwoofer is shielded from accidental damage while maintaining airflow. Spring-loaded nickel-plated terminals ensure secure, corrosion-resistant connections that make installation quick and long-lasting. This enclosure isn’t just small—it’s smart, combining thoughtful design with rugged components built to withstand daily use. Key Features • Vented Enclosure Design – Increases output and enhances bass efficiency, giving you deeper, cleaner low frequencies from a compact setup. • Protective Woofer Grille – Shields the subwoofer cone from impact or damage without compromising airflow or sound clarity. • Spring-Loaded Nickel-Plated Terminals – Durable, high-conductivity terminals for fast, secure wire connections. • Internally Braced Construction – Corner bracing reduces internal standing waves, eliminates excess noise, and improves structural integrity. • Compact and Versatile Fit – Perfect for vehicles with space constraints, while delivering powerful bass in a small form factor. General Features: Subwoofer Size: 6.5” (Inches) Enclosure Type: Vented (Ported) Power Handling (RMS): 200 Watts Power Handling (Peak): 800 Watts Nominal Impedance: 4 Ohms Frequency Response: 28Hz – 500Hz Height: 5” Depth: 9.53” Width: 14.06” Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-44% sale

ORION Cobalt CPE120 – 12-Inch Active Down-Firing Enclosure

00
DAYS 00
HRS 00
MIN 00
SEC

ORION Cobalt CPE120 – 12-Inch Active Down-Firing Enclosure $259.95 $459.99

ORION Cobalt CPE120 – 12-Inch Active Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 12-Inch Active Down-Firing Subwoofer Enclosure For those looking for deep, powerful bass without the hassle of an external amplifier, the Cobalt CPE120 is the perfect solution. This 12-inch active down-firing subwoofer enclosure delivers rich, low-frequency response in a compact, space-saving design, making it an excellent choice for vehicles with limited installation space. With a built-in amplifier, the CPE120 eliminates the need for an external power source, providing seamless integration and powerful sound in one easy-to-install package. Why Choose an Active Down-Firing Enclosure? Unlike traditional subwoofer setups, the CPE120's down-firing design allows the subwoofer to utilize the vehicle’s floor as a natural amplifier, enhancing low frequencies and producing deeper, more immersive bass. The built-in amplifier ensures optimized power delivery, allowing the subwoofer to operate at peak performance without distortion. This all-in-one solution provides a hassle-free setup while delivering thunderous bass in a sleek, low-profile design. Built for Performance and Convenience The Cobalt CPE120 is constructed from high-quality MDF, ensuring rigid structural integrity to prevent unwanted resonance and distortion. The heavy-duty automotive-grade carpet covering not only enhances its aesthetic appeal but also helps keep the enclosure securely in place during vehicle movement. Designed for plug-and-play simplicity, the CPE120 features an integrated amplifier, making it easy to install without requiring additional wiring or an external power source. Whether you want booming bass for high-energy music or smooth, low-frequency enhancement for a balanced sound, this active subwoofer enclosure delivers exceptional performance with minimal effort. Key Features Integrated Amplifier for Hassle-Free Power – Built-in amplifier delivers optimized power output, eliminating the need for an external amp while ensuring clean, distortion-free bass. Down-Firing Design for Enhanced Bass Response – Uses vehicle floor reflection to maximize low-end output, producing deeper, richer bass with minimal distortion. Premium MDF Construction for Reduced Vibrations – Built with high-density MDF, the enclosure is rigid and durable, minimizing resonance for accurate, powerful bass performance. Sleek Automotive-Grade Carpet Finish – Professional, non-slip covering that enhances aesthetics while keeping the enclosure securely in place during driving. Compact, All-in-One Solution – Space-saving design with integrated amplifier, ideal for vehicles with limited space, allowing for easy installation without sacrificing bass power. General Features: Speaker Size: 12 (Inches) Enclosure Type: Active Down-Firing Power Handling (Peak): 2000 Watts Power Handling (RMS): 500 Watts Sensitivity: 90 dB Frequency Response: 26 Hz - 500 Hz Enclosure Volume: 0.84 cu. ft. Dimension: 21" x 7" x 14" | 534mm x 178mm x 356mm (WxHxD) Final Impedance: 4 Ohms Bass Boost: 0 -+ 12 dB Low Pass Crossover: 50Hz - 200Hz Hi and Low-Level Inputs Cone Material: Spun Aluminum Cone Surround Material: Hi Strength Rubber EPDM Enhanced Surround Enclosure Type: Air Tight Sealed Enclosure Terminal Type: Push Type Terminals Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-48% sale

ORION Cobalt CPE100 – 10-Inch Active Down-Firing Enclosure

00
DAYS 00
HRS 00
MIN 00
SEC

ORION Cobalt CPE100 – 10-Inch Active Down-Firing Enclosure $239.95 $459.99

ORION Cobalt CPE100 – 10-Inch Active Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 10-Inch Active Down-Firing Subwoofer Enclosure For those looking for deep, powerful bass without the hassle of an external amplifier, the Cobalt CPE100 is the perfect solution. This 10-inch active down-firing subwoofer enclosure delivers rich, low-frequency response in a compact, space-saving design, making it an excellent choice for vehicles with limited installation space. With a built-in amplifier, the CPE100 eliminates the need for an external power source, providing seamless integration and powerful sound in one easy-to-install package. Why Choose an Active Down-Firing Enclosure? Unlike traditional subwoofer setups, the CPE100's down-firing design allows the subwoofer to utilize the vehicle’s floor as a natural amplifier, enhancing low frequencies and producing deeper, more immersive bass. The built-in amplifier ensures optimized power delivery, allowing the subwoofer to operate at peak performance without distortion. This all-in-one solution provides a hassle-free setup while delivering thunderous bass in a sleek, low-profile design. Built for Performance and Convenience The Cobalt CPE100 is constructed from high-quality MDF, ensuring rigid structural integrity to prevent unwanted resonance and distortion. The heavy-duty automotive-grade carpet covering not only enhances its aesthetic appeal but also helps keep the enclosure securely in place during vehicle movement. Designed for plug-and-play simplicity, the CPE100 features an integrated amplifier, making it easy to install without requiring additional wiring or an external power source. Whether you want booming bass for high-energy music or smooth, low-frequency enhancement for a balanced sound, this active subwoofer enclosure delivers exceptional performance with minimal effort. Key Features Integrated Amplifier for Hassle-Free Power – Built-in amplifier delivers optimized power output, eliminating the need for an external amp while ensuring clean, distortion-free bass. Down-Firing Design for Enhanced Bass Response – Uses vehicle floor reflection to maximize low-end output, producing deeper, richer bass with minimal distortion. Premium MDF Construction for Reduced Vibrations – Built with high-density MDF, the enclosure is rigid and durable, minimizing resonance for accurate, powerful bass performance. Sleek Automotive-Grade Carpet Finish – Professional, non-slip covering that enhances aesthetics while keeping the enclosure securely in place during driving. Compact, All-in-One Solution – Space-saving design with integrated amplifier, ideal for vehicles with limited space, allowing for easy installation without sacrificing bass power. General Features: Speaker Size: 10 (Inches) Enclosure Type: Active Down-Firing Power Handling (Peak): 1600 Watts Power Handling (RMS): 400 Watts Sensitivity: 92 dB Frequency Response: 30 Hz - 500 Hz Enclosure Volume: 0.57 cu. ft. Dimension: 19" x 6" x 13" | 483mm x 153mm x 310mm (WxHxD) Final Impedance: 4 Ohms Bass Boost: 0 -+ 12 dB Low Pass Crossover: 50Hz - 200Hz Hi and Low-Level Inputs Cone Material: Spun Aluminum Cone Surround Material: Hi Strength Rubber EPDM Enhanced Surround Enclosure Type: Air Tight Sealed Enclosure Terminal Type: Push Type Terminals Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-53% sale

ORION Cobalt CPE80 – 8-Inch Active Down-Firing Enclosure

00
DAYS 00
HRS 00
MIN 00
SEC

ORION Cobalt CPE80 – 8-Inch Active Down-Firing Enclosure $219.95 $459.99

ORION Cobalt CPE80 – 8-Inch Active Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 8-Inch Active Down-Firing Subwoofer Enclosure For those looking for deep, powerful bass without the hassle of an external amplifier, the Cobalt CPE80 is the perfect solution. This 8-inch active down-firing subwoofer enclosure delivers rich, low-frequency response in a compact, space-saving design, making it an excellent choice for vehicles with limited installation space. With a built-in amplifier, the CPE80 eliminates the need for an external power source, providing seamless integration and powerful sound in one easy-to-install package. Why Choose an Active Down-Firing Enclosure? Unlike traditional subwoofer setups, the CPE80's down-firing design allows the subwoofer to utilize the vehicle’s floor as a natural amplifier, enhancing low frequencies and producing deeper, more immersive bass. The built-in amplifier ensures optimized power delivery, allowing the subwoofer to operate at peak performance without distortion. This all-in-one solution provides a hassle-free setup while delivering thunderous bass in a sleek, low-profile design. Built for Performance and Convenience The Cobalt CPE80 is constructed from high-quality MDF, ensuring rigid structural integrity to prevent unwanted resonance and distortion. The heavy-duty automotive-grade carpet covering not only enhances its aesthetic appeal but also helps keep the enclosure securely in place during vehicle movement. Designed for plug-and-play simplicity, the CPE80 features an integrated amplifier, making it easy to install without requiring additional wiring or an external power source. Whether you want booming bass for high-energy music or smooth, low-frequency enhancement for a balanced sound, this active subwoofer enclosure delivers exceptional performance with minimal effort. Key Features Integrated Amplifier for Hassle-Free Power – Built-in amplifier delivers optimized power output, eliminating the need for an external amp while ensuring clean, distortion-free bass. Down-Firing Design for Enhanced Bass Response – Uses vehicle floor reflection to maximize low-end output, producing deeper, richer bass with minimal distortion. Premium MDF Construction for Reduced Vibrations – Built with high-density MDF, the enclosure is rigid and durable, minimizing resonance for accurate, powerful bass performance. Sleek Automotive-Grade Carpet Finish – Professional, non-slip covering that enhances aesthetics while keeping the enclosure securely in place during driving. Compact, All-in-One Solution – Space-saving design with integrated amplifier, ideal for vehicles with limited space, allowing for easy installation without sacrificing bass power. General Features: Speaker Size: 8 (Inches) Enclosure Type: Active Down-Firing Power Handling (Peak): 800 Watts Power Handling (RMS): 200 Watts Sensitivity: 90 dB Frequency Response: 32 Hz - 500 Hz Enclosure Volume: 0.35 cu. ft. Dimension: 17.6" x 6" x 9" | 447mm x 153mm x 229mm (WxHxD) Final Impedance: 4 Ohms Bass Boost: 0 -+ 12 dB Low Pass Crossover: 50Hz - 200Hz Hi and Low-Level Inputs Cone Material: Spun Aluminum Cone Surround Material: Hi Strength Rubber EPDM Enhanced Surround Enclosure Type: Air Tight Sealed Enclosure Terminal Type: Push Type Terminals Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-61% sale

ORION Cobalt CDF12 – 12-Inch Passive Down-Firing Enclosure

00
DAYS 00
HRS 00
MIN 00
SEC

ORION Cobalt CDF12 – 12-Inch Passive Down-Firing Enclosure $179.95 $459.99

ORION Cobalt CDF12 – 12-Inch Passive Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 12-Inch Down-Firing Enclosure If you’re searching for a space-efficient subwoofer enclosure that delivers rich, deep bass, the Cobalt CDF12 is your perfect solution. Designed for optimal low-frequency performance, this 12-inch passive down-firing enclosure is engineered to enhance bass output while keeping your subwoofer protected. Whether you’re upgrading your factory sound system or fine-tuning your custom setup, the CDF12 provides the perfect balance of power, durability, and clarity. Why Choose a Down-Firing Enclosure? Unlike traditional front-firing enclosures, the CDF12 utilizes a down-firing design, directing sound waves toward the vehicle’s surface, which naturally amplifies low frequencies and creates a deep, rich bass response. This design also helps to reduce distortion and speaker fatigue, ensuring clean, powerful bass performance over extended periods. Built to Last, Engineered for Performance The Cobalt CDF12 is constructed from high-quality MDF (Medium-Density Fiberboard), a material specifically chosen to eliminate vibrations and unwanted resonance, ensuring tight, distortion-free bass. The heavy-duty automotive-grade carpet covering not only gives it a sleek, professional look but also prevents unwanted movement while driving, keeping your enclosure securely in place. With its passive design, the CDF12 offers versatile compatibility with a wide range of 12-inch subwoofers, allowing you to customize your audio system for peak performance. Whether you’re looking for deep, booming lows or smooth, refined bass, this enclosure is designed to bring out the best in your subwoofer. Key Features Down-Firing Design – Enhances bass response by reflecting sound off surfaces for deeper, more controlled low frequencies. Premium MDF Construction – Provides durability and minimizes resonance for distortion-free sound. Automotive-Grade Carpet Finish – Ensures a sleek, secure fit that prevents movement while driving. Space-Saving Design – Ideal for vehicles with limited space, offering powerful bass without taking up excess room. Passive Configuration – Compatible with most 12-inch subwoofers for easy system customization. General Features: Speaker Size: 12 (Inches) Enclosure Type: Passive Down-Firing Power Handling (Peak): 2000 Watts Power Handling (RMS): 500 Watts Sensitivity: 92 dB Frequency Response: 26 Hz - 500 Hz Enclosure Volume: 0.8 cu. ft. Dimension: 20.47" x 6.7" x 14.1" | 520mm x 170mm x 358mm (WxHxD) Final Impedance: 4 Ohms Cone Material: Spun Aluminum Cone Surround Material: Hi Strength Rubber EPDM Enhanced Surround Enclosure Type: Air Tight Sealed Enclosure Terminal Type: Push Type Terminals Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-63% sale

ORION Cobalt CDF10 – 10-Inch Passive Down-Firing Enclosure

00
DAYS 00
HRS 00
MIN 00
SEC

ORION Cobalt CDF10 – 10-Inch Passive Down-Firing Enclosure $159.95 $429.99

ORION Cobalt CDF10 – 10-Inch Passive Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 10-Inch Down-Firing Enclosure If you’re searching for a space-efficient subwoofer enclosure that delivers rich, deep bass, the Cobalt CDF10 is your perfect solution. Designed for optimal low-frequency performance, this 10-inch passive down-firing enclosure is engineered to enhance bass output while keeping your subwoofer protected. Whether you’re upgrading your factory sound system or fine-tuning your custom setup, the CDF10 provides the perfect balance of power, durability, and clarity. Why Choose a Down-Firing Enclosure? Unlike traditional front-firing enclosures, the CDF10 utilizes a down-firing design, directing sound waves toward the vehicle’s surface, which naturally amplifies low frequencies and creates a deep, rich bass response. This design also helps to reduce distortion and speaker fatigue, ensuring clean, powerful bass performance over extended periods. Built to Last, Engineered for Performance The Cobalt CDF10 is constructed from high-quality MDF (Medium-Density Fiberboard), a material specifically chosen to eliminate vibrations and unwanted resonance, ensuring tight, distortion-free bass. The heavy-duty automotive-grade carpet covering not only gives it a sleek, professional look but also prevents unwanted movement while driving, keeping your enclosure securely in place. With its passive design, the CDF10 offers versatile compatibility with a wide range of 10-inch subwoofers, allowing you to customize your audio system for peak performance. Whether you’re looking for deep, booming lows or smooth, refined bass, this enclosure is designed to bring out the best in your subwoofer. Key Features Down-Firing Design – Enhances bass response by reflecting sound off surfaces for deeper, more controlled low frequencies. Premium MDF Construction – Provides durability and minimizes resonance for distortion-free sound. Automotive-Grade Carpet Finish – Ensures a sleek, secure fit that prevents movement while driving. Space-Saving Design – Ideal for vehicles with limited space, offering powerful bass without taking up excess room. Passive Configuration – Compatible with most 10-inch subwoofers for easy system customization. General Features: Speaker Size: 10 (Inches) Enclosure Type: Passive Down-Firing Power Handling (Peak): 1600 Watts Power Handling (RMS): 400 Watts Sensitivity: 95 dB Frequency Response: 30 Hz - 500 Hz Enclosure Volume: 0.5 cu. ft. Dimension: 18.7" x 6.1" x 12.2" | 475mm x 155mm x 310mm (WxHxD) Final Impedance: 4 Ohms Cone Material: Spun Aluminum Cone Surround Material: Hi Strength Rubber EPDM Enhanced Surround Enclosure Type: Air Tight Sealed Enclosure Terminal Type: Push Type Terminals Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-63% sale

ORION Cobalt CDF8 – 8-Inch Passive Down-Firing Enclosure

00
DAYS 00
HRS 00
MIN 00
SEC

ORION Cobalt CDF8 – 8-Inch Passive Down-Firing Enclosure $149.95 $399.99

Cobalt CDF8 – 8-Inch Passive Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 8-Inch Down-Firing Enclosure If you’re searching for a space-efficient subwoofer enclosure that delivers rich, deep bass, the Cobalt CDF8 is your perfect solution. Designed for optimal low-frequency performance, this 8-inch passive down-firing enclosure is engineered to enhance bass output while keeping your subwoofer protected. Whether you’re upgrading your factory sound system or fine-tuning your custom setup, the CDF8 provides the perfect balance of power, durability, and clarity. Why Choose a Down-Firing Enclosure? Unlike traditional front-firing enclosures, the CDF8 utilizes a down-firing design, directing sound waves toward the vehicle’s surface, which naturally amplifies low frequencies and creates a deep, rich bass response. This design also helps to reduce distortion and speaker fatigue, ensuring clean, powerful bass performance over extended periods. Built to Last, Engineered for Performance The Cobalt CDF8 is constructed from high-quality MDF (Medium-Density Fiberboard), a material specifically chosen to eliminate vibrations and unwanted resonance, ensuring tight, distortion-free bass. The heavy-duty automotive-grade carpet covering not only gives it a sleek, professional look but also prevents unwanted movement while driving, keeping your enclosure securely in place. With its passive design, the CDF8 offers versatile compatibility with a wide range of 8-inch subwoofers, allowing you to customize your audio system for peak performance. Whether you’re looking for deep, booming lows or smooth, refined bass, this enclosure is designed to bring out the best in your subwoofer. Key Features Down-Firing Design – Enhances bass response by reflecting sound off surfaces for deeper, more controlled low frequencies. Premium MDF Construction – Provides durability and minimizes resonance for distortion-free sound. Automotive-Grade Carpet Finish – Ensures a sleek, secure fit that prevents movement while driving. Space-Saving Design – Ideal for vehicles with limited space, offering powerful bass without taking up excess room. Passive Configuration – Compatible with most 8-inch subwoofers for easy system customization. General Features: Speaker Size: 8 (Inches) Enclosure Type: Passive Down-Firing Power Handling (Peak): 800 Watts Power Handling (RMS): 200 Watts Sensitivity: 90 dB Frequency Response: 32 Hz - 500 Hz Enclosure Volume: 0.26 cu. ft. Dimension: 18.7" x 6.1" x 12.2" | 475mm x 155mm x 310mm (WxHxD) Final Impedance: 4 Ohms Cone Material: Spun Aluminum Cone Surround Material: Hi Strength Rubber EPDM Enhanced Surround Enclosure Type: Air Tight Sealed Enclosure Terminal Type: Push Type Terminals Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-8% sale

ORION HCCA181SPLX - 18 Inch Subwoofer 7500 Watts RMS 1-Ohm DVC

00
DAYS 00
HRS 00
MIN 00
SEC

ORION HCCA181SPLX - 18 Inch Subwoofer 7500 Watts RMS 1-Ohm DVC $2,599.95 $2,799.99

ORION HCCA181SPLX - 18 Inch Subwoofer 7500 Watts RMS 1-Ohm DVC The Orion HCCA181SPLX 18 inch subwoofer is designed to deliver earth-shaking bass for the most demanding SPL (Sound Pressure Level) competitions. Built with advanced technology and a rugged construction, this 18-inch subwoofer produces the deepest, most powerful low frequencies, capable of transforming any audio setup into a bass powerhouse. If you’re looking for an 18-inch subwoofer that dominates the competition and sets a new standard for bass performance, the HCCA181SPLX is your ultimate choice. Featuring a dual voice coil (DVC) configuration, the Orion HCCA181SPLX offers flexible wiring options and maximum power handling to deliver clear, responsive bass even at extreme volumes. Its durable design includes a field-replaceable cone, ensuring that the subwoofer remains in top condition for extended use. Engineered for reliability and performance, this 18-inch subwoofer is ideal for both professional SPL competitors and bass enthusiasts who demand the absolute best from their sound systems. For those who live for intense, heart-pounding bass, the Orion HCCA181SPLX 18-inch subwoofer is the ultimate solution. Its cutting-edge design and unparalleled craftsmanship ensure that every beat is delivered with precision and power, redefining the possibilities of bass reproduction. Whether for competitions or personal use, the Orion HCCA181SPLX sets you apart with its unmatched bass performance. Extreme Competition Power: The Orion HCCA181SPLX Subwoofer is built for extreme performance, featuring an impressive RMS power handling of 7,500 watts and a peak power capacity of 30,000 watts, making it ideal for handling the most intense power levels in competitive audio setups.Dual 1-Ohm DVC Configuration: The Orion HCCA181SPLX Subwoofer features a dual 1-ohm DVC (Dual Voice Coil) setup, providing versatile wiring options for optimal impedance tuning and maximum power delivery to meet demanding audio requirements.Precision Sound Reproduction: The Orion HCCA181SPLX Subwoofer features a non-pressed paper cone and NBR rubber surround, delivering precise sound reproduction while effortlessly managing extreme power levels, ensuring consistent audio accuracy and clarity.Exceptional Performance: The Orion HCCA181SPLX Subwoofer is equipped with a 4-inch voice coil, designed to excel in the most demanding audio environments, making it the perfect choice for competitive setups and high-performance sound systems.High-Quality Components: The Orion HCCA181SPLX Subwoofer is built with a premium magnet structure, advanced cooling system, and durable materials, ensuring consistent, reliable performance even during prolonged, high-power use in intense audio conditions. General Features: Subwoofer Size: 18" (Inches) Voice Coil Configuration: Dual 1-ohm Power Handling (Peak): 30000 Watts Power Handling (RMS): 7500 Watts Sensitivity: 89.1 dB Frequency Response: 20 Hz - 200 Hz Voice Coil Diameter: 4" (Inches) Dustcap Material: Polypropylene Cone Material: Moisture and UV Resistant Glass Fiber Paper Cone Surround Material: NBR Foam Magnet Information: 690 Oz Triple Stack Ceramic Mounting Depth: 467mm / 18.39 (Inches) Cutout Diameter: 455mm / 17.91 (Inches) Overall Diameter: 467mm / 18.39 (Inches Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-7% sale

ORION HCCA151SPLX - 15 Inch Subwoofer 7500 Watts RMS 1-Ohm DVC

00
DAYS 00
HRS 00
MIN 00
SEC

ORION HCCA151SPLX - 15 Inch Subwoofer 7500 Watts RMS 1-Ohm DVC $1,999.95 $2,149.99

ORION HCCA151SPLX - 15 Inch Subwoofer 7500 Watts RMS 1-Ohm DVC The Orion HCCA151SPLX 15 inch subwoofer is a true powerhouse, built to deliver massive bass performance in SPL (Sound Pressure Level) competitions. Designed for serious audio enthusiasts, this 15 inch subwoofer features advanced engineering and a durable construction that can handle extreme power levels, producing deep, thunderous bass that sets the standard in any sound system. If you’re looking to dominate the SPL scene, the HCCA151SPLX is your ticket to unmatched audio performance. Equipped with a dual voice coil (DVC) configuration, the Orion HCCA151SPLX offers flexible wiring options and maximized power handling, ensuring superior sound quality and responsiveness. Its rugged build includes a field-replaceable cone for easy maintenance and long-lasting use, making it the ideal choice for those who want reliability and power in their 15 inch subwoofer. This subwoofer is engineered to perform under pressure, providing consistent, powerful bass that can shake the ground. Perfect for both SPL competitors and bass lovers, the Orion HCCA151SPLX 15-inch subwoofer brings a new dimension to your audio setup. With its innovative design and meticulous craftsmanship, it delivers an unparalleled bass experience that pushes the boundaries of sound. Elevate your audio game with the Orion HCCA151SPLX, and feel every beat like never before. Extreme Competition Power: The Orion HCCA151SPLX Subwoofer is engineered for maximum performance, boasting an incredible RMS power handling of 7,500 watts and a peak power capacity of 30,000 watts, perfect for handling the most extreme power levels in competitive settings.Dual 1-Ohm DVC Configuration: The Orion HCCA151SPLX Subwoofer features a dual 1-ohm DVC (Dual Voice Coil) setup, providing versatile wiring options to optimize impedance and deliver maximum power output.Precision Sound Reproduction: The Orion HCCA151SPLX Subwoofer utilizes a non-pressed paper cone and NBR rubber surround to deliver precise sound reproduction, effectively managing extreme power levels while maintaining exceptional audio clarity and accuracy.Exceptional Performance: Featuring a robust 4-inch voice coil, the Orion HCCA151SPLX Subwoofer is designed to perform flawlessly under the most demanding audio conditions, making it the perfect choice for competitive setups and serious audiophiles.High-Quality Components: The Orion HCCA151SPLX Subwoofer is crafted with a premium magnet structure, advanced cooling technology, and durable materials, ensuring reliable, consistent performance even during prolonged, high-power use. General Features: Subwoofer Size:15" (Inches) Voice Coil Configuration:Dual 1-ohm Power Handling (Peak):30000 Watts Power Handling (RMS):7500 Watts Sensitivity:87.81 dB Frequency Response:20 Hz - 150 Hz Voice Coil Diameter:4" (Inches) Dustcap Material:Polypropylene Cone Material:Moisture and UV Resistant Glass Fiber Paper Cone Surround Material:NBR Foam Magnet Information:690 Oz Triple Stack Ceramic Mounting Depth:379.5mm / 14.94 (Inches) Cutout Diameter:383mm / 15.08 (Inches) Overall Diameter:423.5mm / 16.67 (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-45% sale

xp-audio-50-feet-14-black-split-wire-loom-tubing

00
DAYS 00
HRS 00
MIN 00
SEC

Metra M-SLT14 100' 1/4" split loom wire tubing 100 feet in black ribbed design $19.99 $35.99

Metra M-SLT14 100' high-quality 1/4" split loom wire tubing 100 feet in a black ribbed design The Metra wire loom tubing is available in 1/4" diameter and 100-foot length. The split wire loom tubing will help you to stay organized, and it is excellent for your mess on the table. You can conceal everything behind the table. The black loom with 1/4" diameter can house several cables. This is a flexible split loom, and you can add a maximum of cables. You can easily install split looms anywhere in your office or at home. General Features: split loom tubing The ribbed design of a flexible tube that is easy to install 1/4" in diameter length: 100 ft. Color is black Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-36% sale

atslt12-10-black-10ft-12-split-wire-loom-tubing

00
DAYS 00
HRS 00
MIN 00
SEC

AT 10 Ft. 1/2" Split Wire Loom Conduit Polyethylene Tubing Black Color Sleeve Tube $12.99 $19.99

American Terminal ATSLT12-10 100 Feet Black 1/2" Split Loom Split Wire Loom Conduit Corrugated Plastic Tubing Sleeve for Various Automotive, Home, Marine, Industrial Wiring Applications, Etc. Polyethylene Split Loom Tubing Has Become One of The Most Popular Conduits for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. Our Braided Cable Sleeping Wrap is resistant to Various Abrasions, reduces damage, Suitable for Various Electric Insulation, Efficiently Arranges and protects the Cables, ensures the Cable Management is neat and Clean/Insulation Sealing Wear-Resistant General Features: The Split Wire Loom Tubing That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire RunIs Inserted, The Split Remains Closed. Perfect for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. Ideal for Various Automotive, Home, Marine, and Industrial Wiring Applications, Etc. … Ribbed Design Allows for A Flexible Tube That Is Easy to Install Practical Design The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed When Bent or Twisted, The Split Remains Closed Resistant to Abrasion, Gasoline, Oil, And Many Other Chemicals Great for Wrapping Power/Ground Cable Protect Cables from Wear & High Temperature Prolong the Service Life of The Cable Very Easy to Bend Very High Abrasion, Impact, and Shock Resistance High Flexibility & Fatigue Life, Allows for A Flexible Tube That is Easy to Bend and Install Operating Temperature Range: -40˚ To 200˚F (-40˚C To 93˚C) Materials: Polyethylene Color: Black Materials: Polyethylene Our wire loom is made of 100% new and high-quality polyethylene The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed. Perfect for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. Ideal for Various Automotive, Home, Marine, and Industrial Wiring Applications, Etc. … Ribbed Design Allows for A Flexible Tube That Is Easy to Install Practical Design The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed When Bent or Twisted, The Split Remains Closed Resistant to Abrasion, Gasoline, Oil, And Many Other Chemicals Great for Wrapping Power/Ground Cable Protect Cables from Wear & High Temperature Prolong the Service Life of The Cable Very Easy to Bend Very High Abrasion, Impact, and Shock Resistance Flexible Ribbed Tube Design for clean and easy installation Oil, Gasoline, and abrasion-resistant High Flexibility & Fatigue Life, Allows for A Flexible Tube That is Easy to Bend and Install Our split loom is easy to work with and allows for quick wire insertion. Our split loom tubing is thick enough to provide complete protection for the wires. Our split wire loom is used to protect electrical wiring in industry, automotive, home & office. Our wire loom tubing is resistant to abrasion & harmful chemical corrosion. Good chemical stability Our wire protector tubing is used to wrap wires, making cables neat and orderly. Color: Black Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Hot Deals (12048)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER