Car Equalizers (80)

Soundstream MPQ-5V 5-Band Parametric Equalizer w/ Voltage-Level Indicator MPQ-5V Specifications: EQUALIZATION RANGE:+/- 12 dB FREQUENCY RESPONSE: 10 Hz-50K Hz +/-1 dB MAXIMUM OUTPUT VOLTAGE: 8.5V-9V THD: 0.05% INPUT SENSITIVITY: 3V GAIN RANGE: 20 dB CHANNEL SEPARATION DEGREE: 82 dB/1K Hz INPUT IMPEDANCE: 20K Ohms POWER SUPPLY: 11 V-15 V DC NEG.GROUND OUT IMPEDANCE: 2K Ohms SIZE:17.8 cm x 10.5 cm x2.54 cm ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute BXPRO2 Digital Bass Maximizer Processor with Dash Mount Remote Control The Absolute BXPRO2 is one of the finest and most accurate bass-enhancing and restoration systems today! Enhance your listening experience with a device with several different bass output selections. The DBM-800 was also developed to restore low frequencies lost during the recording process so that your sound will always sound clean. And for your convenience, there is a dash-mounted level control unit that permits instant adjustments for your passengers who are not as much of a "bass-head" as you or whenever you need to turn it down just a little bit. General Features: Digital bass maximizer  and bass restoration processor with dash mount remote control Bass restoration lighted display, Max bass control designed to work with aftermarket and factory systems The bass output control circuit allows the unit to maximize the bass output of any audio system while restraining destructive bursts PFM Subsonic filter control to fine-tune the bass response Bass maximizer indicator, bass output control Balanced inputs, bass output control selectable grounding mode (balanced or unbalanced) Subsonic filter and bass level control preamp and speaker-level inputs switchable Programmable Frequency Match This universal product works with all Car Audio equipment such as Absolute, Cerwin Vega, Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, etc. Bass Restoration Lighted Display Blue illuminated controls Parametric bass equalization The efficient bass equalization circuit 13.5V Max output level Frequency response: 10Hz - 10000Hz Balance input noise rejection: 60 dB Total harmonic distortion: 0.003%, S/N:130 dB Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute BXPRO2 Digital Bass Maximizer Processor with Dash Mount Remote Control The Absolute BXPRO2 is one of the finest and most accurate bass-enhancing and restoration systems today! Enhance your listening experience with a device with several different bass output selections. The DBM-800 was also developed to restore low frequencies lost during the recording process so that your sound will always sound clean. For your convenience, there is a dash-mounted level control unit that permits instant adjustments for your passengers who are not as much of a "bass-head" as you or whenever you need to turn it down just a little bit. General Features: Digital bass maximizer  and bass restoration processor with dash mount remote control Bass restoration lighted display, Max bass control designed to work with aftermarket and factory systems The bass output control circuit allows the unit to maximize the bass output of any audio system while restraining destructive bursts PFM Subsonic filter control to fine-tune the bass response Bass maximizer indicator, bass output control Balanced inputs, bass output control selectable grounding mode (balanced or unbalanced) Subsonic filter and bass level control preamp and speaker-level inputs switchable Programmable Frequency Match This universal product works with all Car Audio equipment such as Absolute, Cerwin Vega, Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, etc. Bass Restoration Lighted Display Blue illuminated controls Parametric bass equalization The efficient bass equalization circuit 13.5V Max output level Frequency response: 10Hz - 10000Hz Balance input noise rejection: 60 dB Total harmonic distortion: 0.003%, S/N:130 dB Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik BASS-12C Digital Bass Reconstruction Maximizer They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, get yourself a Power Acoustik Digital Bass Reconstruction Processor. The BASS-12C digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for live music’s incredible punch and impact. You get more bass! General Features: Chrome Finish w/ Illuminated Badge 27-63Hz Parametric Bass Boost Variable Bandwidth Adjustment Dash Mount Remote Control LED MAX Bass Indicators Input Connection Type: RCA Output Connection Type: RCA Maximum Output Voltage: 13.5 volts Frequency Response: 10 – 100 Hz Signal-to-Noise Ratio: 130 dB Total Harmonic Distortion (THD): 0.003% 1 year manufactures warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Power Acoustik PWM-5V 5-Band Parametric Equalizer w/ Subwoofer Control Maybe you’ve got an older car audio system from which you want to get more. Perhaps you’ve got an all-new setup that you want to get the maximum potential. In either case, Power Acoustik’s NEW PWM-5V has (5) bands of equalization that’ll let you fine-tune your sound, along with independent master volume, subwoofer level, and fader controls’ll maintain your highs and lows in balance.The PWM-5V features RCA inputs so that you can connect them to your aftermarket system. The RCA outputs ensure that your amplifiers get a clean, powerful signal for maximum performance. You will also notice this particular Equalizer has a built-in Voltage-Level Indicator. General Features: Power Supply: 11-15 DC Max Output Voltage: 8.5V RMS Frequency Response: 10-50 kHz ± 1 dB Equalization Range: ± 12 dB Subwoofer Crossover Frequency: 43-60 Hz Input Impedance: 20K Ohms Output Impedance: 2K Ohms S/N Ratio: 80 dB Ref. 1V Input T.H.D.: 0.05% SIZE: 7″L x 4.25″W x 1.25″H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

AUTOTEK ATEQ 4-Band Equalizer with 9-Volt Line-Driver and Multiple-Source Signal Processor 1/2 DIN, 4-band, pre-amp EQ with front/rear active crossover Audio input selector for switching between the head unit and another source Input level controls for both car radio and any media device to ensure identical volume levels Master volume control of the SPL-level for both sound sources Front to rear dual-amp fader 2 audio inputs with level matching Authorized Internet Dealer 1-year Manufacturer's Warranty

Hifonics BXiPro3.0 Digital Bass Processor Epicenter 2CH Hi/Lo Converter w/ Noise Reduction The Hifonics BXiPRO3.0 Digital Bass Enhancement Processor integrates with an upgraded subwoofer system into any vehicle. Showcasing a compact design with a sleek finish, this all-in-one processor gives you 3x the power at half the size in space. With adjustable mounting solutions and multipoint installation options, including placing the processor behind dash-concealed locations, this processor will be as flexible as your installation demands. With rugged, reinforced connectors that feature Tiffany Style differential noise inputs, you’ll not only receive a processor that has superior connectivity where you need it the most, but you’ll also embrace selectable multilevel inputs and dual remote outputs (high-levels out and sub-levels out) that connect 2 different amplifiers. This processor also comes with a wired, adjustable, dash-mountable remote. General Features: BXiPro Bass Enhancer Processor with Dash Mount Remote Control Enhances and restores the bass level Screw-in power and speaker connectors to chassis for secure connections that prevent disconnection Dual-function bass remote Remote wire input, DC sense, and music sense turn on Input and output signal clip indicators Mono adjustable output level (can be controlled by bass remote) 48v high-level inputs Ability to use test tones to set input and output levels Fine-tuning adjustability using bass width and sweep Fixed 4v full range output Small profile Tiffany-style RCA connectors Low and high-level audio inputs (speaker-level inputs) Balanced differential inputs (for noise reduction) Authorized Internet Dealer 1-year Manufacturer's Warranty Functions & Operations: Adjustable bass enhancement preamp output Bass remote input Preamp full range output Adjustable bass level output Adjustable bass width and sweep adjustments Output level control with clip indicators Input level control with clip indicators Selectable input level range (RCA or speaker level) Selectable turn on the trigger (remote wire input, DC sense, and signal sense) Low-level inputs (RCA level) High-level input (speaker level) Power connector with two remote output trigger wires Dual concentric bass knob (A. bass level, B. output level) Product Specifications: Fuse value: 1A mini ATC Voltage range: 9.5V -15V Bass remote type: HF-U-02 Fixed voltage output full range: 4V Adjustable subwoofer output voltage: 0V -9V Maximally Flat Frequency Response Main: (-3dB) 10Hz to >50kHz Input Impedance Low-level inputs: 20k Ohms Input Impedance High-level inputs: 20k Ohms Maximum high-level Input Voltage on any input before clipping: >48V Maximum Output voltage at 1.0% THD+N (subwoofer output): 9.0V Signal to Noise Ratio (ref to 2Vrms out, unity gain): -84.0dBA EQ boost: Variable to +8.1dB Unit turn on options: 30mV High-Level Audio, 59mV RCA Audio, 2.2V DC Offset Current Draw: 0.32A Turn on Delay Time: 0.1 seconds Setup test tone track: 100 Hz & 1000Hz Dimensions: 109mm W x134mm D x 30.5mm H Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

AudioControl LC7i 6-channel line output converter with bass restoration adds aftermarket subs and amps to a factory system (Black)+ Free Absolute Electrical Tape+ Phone Holder Want to add your own speakers, subs, and amps to a factory system? AudioControl's LC7i 6-channel line output converter (LOC) with bass restoration allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions, or other built-in factory features. The LC7i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. Summing The LC7i sums its input signals together, even if they've been crossed over for tweeters, mids, and subs by the factory system. That way, you can count on a strong, smooth, full-range signal for your processors and amps. The LC7i features six RCA preamp outputs that'll handle a traditional front/rear/sub setup. Why you have to restore the bass Many factory radios actually turn the bass down as you increase the volume to protect the cheap factory speakers, subsequently removing much of your music's power and punch. AudioControl developed a patent pending AccuBASS™ circuit that restores the bass the factory radio erased, giving you much fuller and more enjoyable sound. The AccuBASS is applied to the subwoofer output channel, so your sub amp can have the entire, restored signal to work with. Level-matching with an LED indicator AudioControl makes it easy: set your factory stereo to about 3/4 maximum volume, turn the output level control of the LC7i until the "Maximized" light begins to flicker, then adjust the gain controls on your amps and you're done. You've level-matched the output of your receiver to the amplifier's input, so you can count on getting maximum performance and minimum noise from your system. Convenience The optional dash-mounted ACR-1 wired remote allows you to adjust the volume of the bass while you're on the go. The speaker-level inputs sense incoming signals and turn on the LC7i, while a built-in 12-volt trigger turns on your amps as well. If your factory system only has channels for front and rear speakers, AutoMode™ will create the output you can use for your subs Product highlights: 6-channel line output converter plus bass restoration 6 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing AccuBASS™ bass restoration circuitry 6 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: optional wired remote subwoofer level controller available (#161ACR1) AutoMode™ turns 4-channel input to 6-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps 8-11/16"W x 1-3/8"H x 6-9/16"D warranty: 5 years 6-Channel line output converter (black) Owner's manual QC checklist Absolute BT1700 Vinyl Electrical Tape is good quality, multi-purpose vinyl insulating tape. It has great resistance to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable. Details Resists abrasion, moisture, alkalis, solvents, and acids Flame-retardant and inhibits the corrosion of electrical conductors Made of durable PVC Compatible with rubber and synthetic splicing compounds Withstands a temperature range of 32 to 194 °F (0 to 90 °C) UL Listed, CSA and VDE Certified Specifications Adhesive Type Rubber Application Insulation Brand Absolute Elongation at Break 200 % Maximum Operating Temperature (Celsius) 90 Degree Celsius Maximum Operating Temperature (Fahrenheit) 194 Degree Fahrenheit Minimum Operating Temperature (Fahrenheit) 32 Degree Fahrenheit Overall Length (Imperial) 60 ft Overall Length (Metric) 18 m Overall Width (Imperial) 0.75 in Overall Width (Metric) 19 mm Product Color Black Shelf Life 5 Year Tape Grade General Use ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

AudioControl LC7i 6-channel line output converter with bass restoration adds aftermarket subs and amps to a factory system (Black) Want to add your own speakers, subs, and amps to a factory system? AudioControl's LC7i 6-channel line output converter (LOC) with bass restoration allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions, or other built-in factory features. The LC7i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. Summing The LC7i sums its input signals together, even if they've been crossed over for tweeters, mids, and subs by the factory system. That way, you can count on a strong, smooth, full-range signal for your processors and amps. The LC7i features six RCA preamp outputs that'll handle a traditional front/rear/sub setup. Why you have to restore the bass Many factory radios actually turn the bass down as you increase the volume to protect the cheap factory speakers, subsequently removing much of your music's power and punch. AudioControl developed a patent pending AccuBASS™ circuit that restores the bass the factory radio erased, giving you much fuller and more enjoyable sound. The AccuBASS is applied to the subwoofer output channel, so your sub amp can have the entire, restored signal to work with. Level-matching with an LED indicator AudioControl makes it easy: set your factory stereo to about 3/4 maximum volume, turn the output level control of the LC7i until the "Maximized" light begins to flicker, then adjust the gain controls on your amps and you're done. You've level-matched the output of your receiver to the amplifier's input, so you can count on getting maximum performance and minimum noise from your system. Convenience The optional dash-mounted ACR-1 wired remote allows you to adjust the volume of the bass while you're on the go. The speaker-level inputs sense incoming signals and turn on the LC7i, while a built-in 12-volt trigger turns on your amps as well. If your factory system only has channels for front and rear speakers, AutoMode™ will create the output you can use for your subs Product highlights: 6-channel line output converter plus bass restoration 6 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing AccuBASS™ bass restoration circuitry 6 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: optional wired remote subwoofer level controller available (#161ACR1) AutoMode™ turns 4-channel input to 6-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps 8-11/16"W x 1-3/8"H x 6-9/16"D warranty: 5 years 6-Channel line output converter (black) Owner's manual QC checklist ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov