Electronics (567)

2 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pairs Pioneer TS-A1677S 320W Max (70W RMS) A-Series 6.5" 3-Way Coaxial Speakers with 82-3002 Speaker Adaptors and 72-4568 Speaker Harness for Selected 95-09 GM Full Size P/U SUV GM Vehicles Interchange Part Number: Metra 82-3002, AI GMSB345 Pioneer’s A-series sound design matches the subwoofer and full-range loudspeakers, providing seamless and smooth sound characteristics with dynamic, high-impact bass that lets you hear and feel the music. Pioneer’s A-series speakers deliver deep bass and low distortion thanks to carbon and mica-reinforced IMPP cone, a magnetic circuit, and a long symmetrical voice coil. Pioneer's Open & Smooth sound delivers smoother, more expansive sound. The A-series speakers are designed to replace the vehicle’s factory-installed speakers and produce improved sound quality at an exceptional value. Carbon & Mica reinforced IMPP cone for deeper and richer bass response. The Pioneer Open & Smooth sound concept delivers open staging and smooth transition of driver response to provide the ultimate in-car sound. General Features: 6.5" A-Series 3-Way Car Speakers Power Handling: Peak: 320 watts per pair / 125 watts each RMS: 70 watts per pair / 35 watts each Carbon and MICA Reinforced IMPP Woofer Cone Elastic Polymer Surround Material Dual 11mm PET dome tweeters Rubber magnet boot cover CEA-2031 compliant speakers High Heat Resistant Wire Voice Coil 11.2 oz. Ferrite magnet motor structure Grills Included Top-mount Depth: 2 3/8" 4 ohms impedance Frequency Response: 37-24,000 Hz Sensitivity: 87dB What is in the TS-A1677s package: Two 3-way speakers 2 Grilles Two 14" lengths of speaker wire 8 Self-tapping screws 8 Speed clips Warranty sheet Specifications/Instructions/Cutout template on carton TS-A1677S Owner’s Manual Vehicle Compatibility: CADILLAC: 1999-2000 Escalade - Front Speaker Locations 2002-2006 Escalade - Front Speaker Locations 2003-2006 Escalade ESV - Front Speaker Locations 2003-2006 Escalade EXT - Front Speaker Locations CHEVROLET: 1996-2005 Astro - Front and Rear Speaker Locations 2002-2006 Avalanche 1500 - Front Speaker Locations 2002-2006 Avalanche 2500 - Front Speaker Locations 1995-1999 C2500 - Front Speaker Locations 1995-1999 C3500 - Front Speaker Locations 1995-1999 K2500 - Front Speaker Locations 1995-1999 K3500 - Front Speaker Locations 1996-2006 Express 1500 - Front Speaker Locations 1996-2006 Express 2500 - Front Speaker Locations 1996-2006 Express 3500 - Front Speaker Locations 1995-1999 C1500 - Front Speaker Locations 1995-1999 K1500 - Front Speaker Locations 2007 Silverado 1500 Classic - Front Speaker Locations 1999-2006 Silverado 1500 - Front Speaker Locations 1999-2004 Silverado 2500 - Front Speaker Locations 2001-2006 Silverado 2500 HD - Front Speaker Locations 2001-2002 Silverado 3500 - Front Speaker Locations 1995-1999 C1500 Suburban - Front Speaker Locations 1995-1999 C2500 Suburban - Front Speaker Locations 1995-1999 K1500 Suburban - Front Speaker Locations 1995-1999 K2500 Suburban - Front Speaker Locations 2000-2006 Suburban 1500 - Front Speaker Locations 1995-2006 Tahoe - Front Speaker Locations GMC: 1995-1999 C1500 - Front Speaker Locations 1995-1999 K1500 - Front Speaker Locations 1995-2000 C2500 - Front Speaker Locations 1995-2000 C3500 - Front Speaker Locations 1995-2000 K2500 - Front Speaker Locations 1995-2000 K3500 - Front Speaker Locations 1996-2005 Safari - Front and Rear Speaker Locations 1996-2007 Savana 1500 - Front Speaker Locations 1996-2007 Savana 2500 - Front Speaker Locations 1996-2007 Savana 3500 - Front Speaker Locations 1999-2006 Sierra 1500 - Front Speaker Locations 2001-2003 Sierra 1500 HD - Front Speaker Locations 2005-2006 Sierra 1500 HD - Front Speaker Locations 1999-2004 Sierra 2500 - Front Speaker Locations 2001-2006 Sierra 2500 HD - Front Speaker Locations 2001-2006 Sierra 3500 - Front Speaker Locations 2007 Sierra 1500 Classic - Front Speaker Locations 1995-1999 C1500 Suburban - Front Speaker Locations 1995-1999 C2500 Suburban - Front Speaker Locations 1995-1999 K1500 Suburban - Front Speaker Locations 1995-1999 K2500 Suburban - Front Speaker Locations 1995-2006 Yukon - Front Speaker Locations 2000-2006 Yukon XL 1500 - Front Speaker Locations 2000-2006 Yukon XL 2500 - Front Speaker Locations Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pioneer TS-A1677S or TS-A1670F 320W Max (70W RMS) A-Series 6.5" 3-Way Coaxial Speakers. Pioneer’s A-series sound design matches the subwoofer and full-range loudspeakers, providing seamless and smooth sound characteristics with dynamic, high-impact bass that lets you hear and feel the music. Pioneer’s A-series speakers deliver deep bass and low distortion thanks to carbon and mica-reinforced IMPP cone, a magnetic circuit, and a long symmetrical voice coil. Pioneer's Open & Smooth sound delivers smoother, more expansive sound. The A-series speakers are designed to replace the vehicle’s factory-installed speakers and produce improved sound quality at an exceptional value. Carbon & Mica reinforced IMPP cone for deeper and richer bass response. The Pioneer Open & Smooth sound concept delivers open staging and smooth transition of driver response to provide the ultimate in-car sound. General Features: 6.5" A-Series 3-Way Car Speakers Power Handling: Peak: 320 watts per pair / 125 watts each RMS: 70 watts per pair / 35 watts each Carbon and MICA Reinforced IMPP Woofer Cone Elastic Polymer Surround Material Dual 11mm PET dome tweeters Rubber magnet boot cover CEA-2031 compliant speakers High Heat Resistant Wire Voice Coil 11.2 oz. Ferrite magnet motor structure Grills Included Top-mount Depth: 2 3/8" 4 ohms impedance Frequency Response: 37-24,000 Hz Sensitivity: 87dB What is in the TS-A1677s package: Two 3-way speakers 2 Grilles Two 14" lengths of speaker wire 8 Self-tapping screws 8 Speed clips Warranty sheet Specifications/Instructions/Cutout template on carton TS-A1677S Owner’s Manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Pioneer TS-A1677S 320W Max (70W RMS) A-Series 6.5" 3-Way Coaxial Speakers Pioneer’s A-series sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high-impact bass that lets you hear and feel the music. Pioneer’s A-series speakers deliver deep bass and low distortion thanks to carbon and mica reinforced IMPP cone, along with a magnetic circuit and long symmetrical voice coil. Pioneer's Open & Smooth sound delivers smoother, more expansive sound. The A-series speakers are designed to replace the vehicle’s factory-installed speakers and produce improved sound quality at an exceptional value. Carbon & Mica reinforced IMPP cone for deeper and richer bass response. The Pioneer Open & Smooth sound concept delivers open staging and smooth transition of driver response to provide the ultimate in-car sound. General Features: 6.5" A-Series 3-Way Car Speakers Power Handling: Peak: 320 watts per pair / 125 watts each RMS: 70 watts per pair / 35 watts each Carbon and MICA Reinforced IMPP Woofer Cone Elastic Polymer Surround Material Dual 11mm PET dome tweeters Rubber magnet boot cover CEA-2031 compliant speakers High Heat Resistant Wire Voice Coil 11.2 oz. Ferrite magnet motor structure Grills Included Top-mount Depth: 2 3/8" 4 ohms impedance Frequency Response: 37-24,000 Hz Sensitivity: 87dB What is in the TS-A1677s package: Two 3-way speakers 2 Grilles Two 14" lengths of speaker wire 8 Self-tapping screws 8 Speed clips Warranty sheet Specifications/Instructions/Cutout template on carton TS-A1677S Owner’s Manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie Bundle with CR4-XBT - Bluetooth Studio Monitor - Pair + ProFX6v3 6-channel Mixer with USB and Effects Mackie ProFX6v3 6-Channel Professional Effects Mixer with USB The Mackie ProFX6v3 Professional Effects Mixer with USB is affordable for live, home recording, and content creators. It now features Onyx mic preamps that offer 60db of headroom and 24 built-in FX. Record your tracks in 24-bit/192kHz quality with 2x4 USB I/O and zero-latency hardware monitoring. Pro Tools | First and Waveform OEM recording software/plugin packages are included.Mix / Record / CreateWhether you are mixing live polka, recording your next autoharp hit, or streaming your world record hula hoop attempt, ProFXv3 Series mixers are here to take your project to the next level. General Features: Up to 60dB of gain and ultra-low noise High-resolution GigFX effects engine 24 different FX options, from reverbs to delays Lay down your tracks in incredible 24-bit/192kHz quality 2x4 USB I/O allows you to create two custom mixes single-knob compression for maximum channel headroom ProTools | First includes 23 plugins DAW Essentials Bundle for Waveform OEM Solid steel chassis with tough ABS side protection Rugged design will stand up to the wear and tear of the road 2-band EQ and 100Hz low-cut filter on both channels 48-volt phantom power USB for playback music and recording into your computer Balanced XLR and balanced/unbalanced outputs The headphone output has a separate volume control for comfortable monitoring. Type: Analog Mixer with USB Interface Channels: 6 (2 x mono, 2 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution: 24-bit/192kHz Faders: Rotary Pots Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z) Phantom Power: Yes Inputs - Line: 2 x 1/4" (line), 1 x 1/8" (stereo) Outputs - Main: 2 x XLR, 2 x 1/4" (L/R) Headphones: 1 x 1/4" USB: 1 x Type B EQ Bands: 2-band EQ, 100Hz Low-cut Filter Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Waveform OEM DAW, FX Plug-in Collection Power Source: 12V DC power supply (included) Height: 2.9" Width: 8.4" Depth: 7.5" Weight: 2.6 lbs. What's in the ProFX6v3 package: 6-Channel mixer 59" DC power supply 12VDC/2A output 76" USB cable type-A to type-B / 2.0 Quickstart guide Waveform OEM download card/license code ProFX6v3 owner's manual Mackie CR4-XBT CR-X Series, 4-Inch Multimedia Monitors with Professional Studio-Quality Sound Pair with Bluetooth CR Series Creative Reference Multimedia Monitors offer studio-quality sound with cosmetics that complement any desk, whether making music, creating content, or just relaxing to your favorite tunes. The sleek design of CR-X features a brushed metal panel and a distinct outline that stands out. CR-X is the perfect match for your needs, available in a vast range of sizes from 3” to 8” with a Bluetooth option plus an 8” subwoofer with Bluetooth. Upgrade your listening experience with Mackie CR-X Creative Reference Multimedia Monitors. General Features: stream music from a smartphone or any other Bluetooth-enabled device Desktop monitor speakers with 4" drivers Convenient front-panel volume control and headphone output 4" Polypropylene-Coated Woofer HF Driver Size: 0.75" Tweeter Total Power: 50W Class AB All-Wood Cabinet Custom-Tuned Rear Port Specially Designed Waveguide Front-Panel Stereo Headphone Output Includes speaker cable, RCA-1/8" cable, and 1/8"-1/8" cable Power Configuration: Single Amp LF Driver Size: 4" Woofer LF Driver Type: Polypropylene-coated HF Driver Size:0.75" Tweeter HF Driver Type: Ferrofluid-cooled Silk-dome Frequency Response:70Hz-20kHz (-10dB) Crossover Frequency:3.0 kHz Maximum Peak SPL:100 dB SPL Input Types:1 x Dual RCA Stereo, 2 x 1/4" TRS, 1 x 1/8" Output Types: 1 x 1/8" (headphones), bare wire connectors +/- (connects pair) Enclosure Type: Rear Ported Enclosure Material: Solid MDF with Black Vinyl wrap Height:8.9" Width:6.1" Depth:8.3" Weight:10.1 lbs. What's in the CR4-XBT package? Desktop monitor speakers Speaker cable RCA to 1/8" cable 1/8" to 1/8" cable Quickstart guide CR4-X owner's Manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S 6.5" Front+Rear Speaker Replacement For 2005 INFINITI M35   Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S 6.5" Front+Rear Speaker Replacement For 2004-2005 INFINITI M45 2 Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2 Way Coaxial Car Speakers Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of polyphylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 6-1/2" 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each Power Handling RMS: 160 watts per pair / 80 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified Optional Grills KTE-S65G available 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer Weight: ‎6.4 pounds Dimensions, ‎16.5 x 8.5 x 5 inches MFR #: S2-S65 1-year Manufacturer's Warranty What's in the S2-S65 package: Alpine S2-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire  Eight 1-1/8" Screws Eight M4x6.5mm  Eight M4 Nuts 6 Flat washers 8 Speed clips Warranty information Online product registration information Important Notice sheet Declaration of conformity Template and specs on box Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2 Way Coaxial Car Speakers Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of polyphylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 6-1/2" 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each Power Handling RMS: 160 watts per pair / 80 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified Optional Grills KTE-S65G available 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer Weight: ‎6.4 pounds Dimensions, ‎16.5 x 8.5 x 5 inches MFR #: S2-S65 1-year Manufacturer's Warranty What's in the S2-S65 package: Alpine S2-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire  Eight 1-1/8" Screws Eight M4x6.5mm  Eight M4 Nuts 6 Flat washers 8 Speed clips Warranty information Online product registration information Important Notice sheet Declaration of conformity Template and specs on box Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers + 20' Speaker Wire Package 2 Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1" Silk dome tweeter CTA-2031 compliant speakers 35MM Voice Coil Top-mount depth: 2-9/32" Cutout Dimensions: 5" 4 ohms impedance Frequency Response: 70 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers + 20' Speaker Wire Package Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S 6.5" Rear Factory Speaker Replacement for 2005 Infiniti M35 Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S 6.5" Rear Factory Speaker Replacement for 2000-2003 Nissan Maxima   Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65 6.5" Rear Factory Speaker Replacement for 1997-2003 Infiniti QX4 Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65 6.5" Rear Factory Speaker Replacement for 1997-2003 Infiniti QX4 Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.