Car Bypass Modules & Interfaces (291)

PAC SWI-CP2 ControlPRO Universal Analog/CANbus Steering Wheel Control Interface with DIP Switch Vehicle Selection The ControlPRO SWI-CP2 retains the built-in steering wheel controls in vehicles when replacing the factory radio with an aftermarket radio. It is compatible with today’s most popular vehicles, even with more complex electronic systems, including CAN bus, GMLAN, and Class II systems. The simple-to-use module can be configured in multiple ways, via DIP switches, directly from a USB-connected PC, or through a button learning procedure. Wiring and vehicle configuration switch settings are provided through the ControlPRO Web-APP and Mobile APPs for Android and iOS devices. The SWI-CP2 is designed to minimize installation time much faster than any other products available in the market today. General Features: Easy to Use and Time-Saving Works on Analog (resistive) and Data SWC Systems Vehicle Configuration by:-DIP Switch, vehicle lookup, and switch setting provided by ControlPRO APPs (PC, iOS & Android)-Direct flash from ControlPRO APP for PC (USB connection required) Button learning mode Customizable Button Functions Provides 2 Amp, 12V ACC Output (Data-bus applications) Compatibility Notes: It does not retain the HVAC controls found in some General Motors vehicles What's in the SWI-CP2 package: PAC SWI-CP2 Steering Wheel Control Adapter owner's manual Steering wheel control interface module 2' Wiring harness 2' SWC harness Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. General Features: 8-channel line output converter with auxiliary input 8 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 1 pair of RCA auxiliary inputs 8 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: wired remote controls auxiliary and subwoofer levels AutoMode™ turns 6-channel input to 8-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDI-PO4 Radio Replacement Interface w/ M.O.S.T 25 amp for Porsche 2004-2009 Cayenn General Features: Provides accessory power Retains R.A.P. (retained accessory power) Designed for amplified models Provides NAV outputs (parking brake, reverse, speed sense) Retains balance Micro-B USB updatable Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible vehicles:Porsche 911 (997): 2004-2009 Boxster (987): 2004-2009 Cayman (987c): 2004-2009 What is in the AXDI-PO4 package: AXDI-PO4 interface AXDI-PO4 amplifier interface AXDI-PO4 harness Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Metra Axxess ASWC-1 Universal Steering Wheel Control Interface AXSWC One Interface to Control Them All & 40-CR10 Chrysler 2001-Up Car Antenna AdapterFinally, a simple solution to retaining the steering wheel controls of a vehicle when installing an aftermarket stereo—introducing the Axxess ASWC from Metra Electronics. This universal steering wheel interface is brand new and designed to simplify the installer's life. Unlike other steering wheel interfaces, the ASWC-1 requires no manual programming. After making all the proper connections, this interface will automatically program itself with the new stereo and the vehicle—no more tedious programming of each button. The ASWC-1 has an LED status light that will flash according to the programming and inform you when the sync is done. It is simple. Just plug it in, and you are ready to go! Now installations can be faster, easier, and simpler! If you still prefer to do the programming manually, Axxess has left that as an option.Ready for Any Aftermarket StereoNo matter what type of vehicle or aftermarket stereo you plan to install, the ASWC-1 has you covered! It is fully compatible with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, and more. As long as the stereo has a wired steering wheel remote connection, the ASWC-1 will connect and interface with the vehicle. Plus, the Metra ASWC-1 can be updated. This means that the interface will never be outdated. For the simplest way to retain the steering wheel control in your car, choose the Axxess ASWC-1!General Features: Universal Steering Wheel Control Interface for Aftermarket Receivers Model: ASWC-1 Does not require any programming Works with the 2013 Nissan Altima sedan Car stereo requires a wired steering wheel remote input Can be manually programmed to function the way that the user wants the device to function Designed for use with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, Clarion, Jensen, Dual, Power Acoustik, Soundstream, Valor, Visteon, and more. (Contact us with your model if we didn’t list it). Automatically detects the vehicle OEM interface and will program itself to it Automatically detects the aftermarket radio and sets the steering wheel control functions The ASWC-1 programs itself to the components it is being installed with New LED with dual colors to make it easier to read the diagnostic feedback Updatable with a micro "B" connector (Metra update cable part number USB-MINI-CAB) The fastest and easiest way to retain steering wheel controls when installing an aftermarket stereo Included in Package: ASWC-1 Interface 12 Pin Harness with Male 3.5mm Connector Female 3.5mm connector with brown and brown/white wires 12K Ohm Resistor Installation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Metra Axxess ASWC-1 Universal Steering Wheel Control Interface AXSWC One Interface to Control Them AllFinally, a simple solution to retaining the steering wheel controls of a vehicle when installing an aftermarket stereo—introducing the Axxess ASWC from Metra Electronics. This universal steering wheel interface is brand new and designed to simplify the installer's life. Unlike other steering wheel interfaces, the ASWC-1 requires no manual programming. After making all the proper connections, this interface will automatically program itself with the new stereo and the vehicle—no more tedious programming of each button. The ASWC-1 has an LED status light that will flash according to the programming and inform you when the sync is done. It is simple. Just plug it in, and you are ready to go! Now installations can be faster, easier, and simpler! If you still prefer to do the programming manually, Axxess has left that as an option.Ready for Any Aftermarket StereoNo matter what type of vehicle or aftermarket stereo you plan to install, the ASWC-1 has you covered! It is fully compatible with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, and more. As long as the stereo has a wired steering wheel remote connection, the ASWC-1 will connect and interface with the vehicle. Plus, the Metra ASWC-1 can be updated. This means that the interface will never be outdated. For the simplest way to retain the steering wheel control in your car, choose the Axxess ASWC-1!General Features: Universal Steering Wheel Control Interface for Aftermarket Receivers Model: ASWC-1 Does not require any programming Works with the 2013 Nissan Altima sedan Car stereo requires a wired steering wheel remote input Can be manually programmed to function the way that the user wants the device to function Designed for use with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, Clarion, Jensen, Dual, Power Acoustik, Soundstream, Valor, Visteon, and more. (Contact us with your model if we didn’t list it). Automatically detects the vehicle OEM interface and will program itself to it Automatically detects the aftermarket radio and sets the steering wheel control functions The ASWC-1 programs itself to the components it is being installed with New LED with dual colors to make it easier to read the diagnostic feedback Updatable with a micro "B" connector (Metra update cable part number USB-MINI-CAB) The fastest and easiest way to retain steering wheel controls when installing an aftermarket stereo Included in Package: ASWC-1 Interface 12 Pin Harness with Male 3.5mm Connector Female 3.5mm connector with brown and brown/white wires 12K Ohm Resistor Installation Manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

PAC SWI-RC1 Steering Wheel Control Interface retain the factory steering wheel audio controls You can control functions such as volume, mode, and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor, and Visteon radios equipped with a wired remote control input. Retains steering wheel control functions when replacing the factory radio Retains programming even if the vehicle's battery is disconnected General Features: Quick and easy pre-programmed button function by DIP switch selection Works on Analog (resistive) and Data SWC systems For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC Supports classic, SWI-RC style button programming Customizable button functions (short press/long press/button reassignment) Provides 2 amp, 12volt accessory output (CAN-Bus, LAN, and Class II applications) Compatible with all late-model brands of radios with 3.5mm or two-wire connections To be compatible, the aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone-style jack or Blue/Yellow wire) (e.g., a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you must use the SWI-X. The following Kenwood models are not compatible: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U, and KDC-X798. These models must be used with the SWI-CP5. Clarion model CZ500 does not support remote Bluetooth controls JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer. Pioneer radios with Bluetooth features, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer. Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH, and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

PAC Steering Wheel Control Interface retains the factory steering wheel audio controls SWI-RC Control functions such as volume, mode, and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor, and Visteon radios equipped with a wired remote control input. Retains steering wheel control functions when replacing the factory radio Retains programming even if the vehicle's battery is disconnected General Features: Quick and easy pre-programmed button function by DIP switch selection Works on Analog (resistive) and Data SWC systems For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC Supports classic, SWI-RC style button programming Customizable button functions (short press/long press/button reassignment) Provides 2 amp, 12volt accessory output (CAN-Bus, LAN, and Class II applications) Compatible with all late-model brands of radios with 3.5mm or two-wire connections The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you will need to use the SWI-X. Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5. Clarion model CZ500 does not support remote Bluetooth controls JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer. Pioneer radios with Bluetooth features, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer. Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH, and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Crux CNS-01N License Plate Light Camera for 2010-2017 Nissan NV200 Nissan NV200 Camera General Features: Vehicle Specific Rear View Backup CameraCompatible with 2010-2017 Nissan NV200Mounting Style: License Plate FrameNTSC/PAL TV SystemViewing Angle: 170°Guidelines: YesInvert Image: NoWaterproof: YesResolution: 480 TV LinesParking Line Delete: YesIllumination: 0.2 LUXColor: BlackDimensions: 4.8"L x 3"W x 2.5"H Compatibility: 2010 – 2017 NV200 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·    

Crux CMB-17C Trunk Handle Camera For 2015-2017 Mercedes-Benz C300 Camera for Mercedes-Benz C300 2015-Up General Features: Vehicle Specific Trunk Handle Rear View Backup CameraCompatible with 2015-2017 Mercedes-Benz C300Mounting Style: Tailgate Handle MountNTSC/PAL TV SystemViewing Angle: 170°Guidelines: YesInvert Image: NoWaterproof: YesResolution: 480 TV LinesParking Line Delete: YesIllumination: 0.4 LUXColor: BlackDimensions: 9"L x 3.5"W x 2.75"H Compatibility: 2015-2017 Mercedes Benz C-Class ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·    

Crux CMB-16G Handle Camera for 2012 – 2016 Mercedes-Benz GLK Series OEM Style Handle Camera for 2012 – 2016 Mercedes-Benz GLK General Features: Vehicle Specific Trunk Handle Rear View Backup CameraCompatible with 2012-2016 Mercedes-Benz GLK SeriesMounting Style: Tailgate Handle MountNTSC/PAL TV SystemViewing Angle: 170°Guidelines: YesInvert Image: NoWaterproof: YesResolution: 480 TV LinesParking Line Delete: YesIllumination: 0.4 LUXColor: Black Compatibility: 2012-2016 Mercedes Benz GLK-Class ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·    

Crux CMB-15T Trunk Handle Camera for 2013-2017 Mercedes-Benz Camera for Mercedes-Benz CLA Handle General Features: Trunk Handle Camera Compatible with 2013-2017 Mercedes-Benz,Mounting Style: Trunk Handle CameraAdds a backup camera to the factory trunk handle.Selectable parking guide lines ON or OFF.With built-in trunk release switch.Maintains the OEM look.Viewing Angle(H): 170°Viewing Angle(V): 90°Waterproof: YesNightvision: NoResolution: 480 TV LinesIllumination: 0.4 LuxDimensions: 4.8"L x 3"W x 2.5"HCamera Cable Length: 6 Ft.Ext. Cable: 20 Ft. Compatibility: 2013-2017 Mercedes Benz CLA-Class ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·    

Crux CMB-15S Trunk Handle Camera for 2007-2013 Mercedes-Benz Camera for Mercedes-Benz S Class General Features: Trunk Handle Camera Compatible with 2007-2013 Mercedes-Benz,Mounting Style: Trunk Handle CameraInstalls at the factory backup camera knockout. No need to drill a holeSelectable Parking Guide Line ON or OFF.Maintains the OEM lookViewing Angle(H): 170°Viewing Angle(V): 90°Waterproof: YesResolution: 480 TV LinesIllumination: 0.2 LuxDimensions (Camera): 4.8"D x 3"W x 2.5"HCamera Cable Length: 4 Ft.Ext. Cable: 20 Ft. Compatibility: 2007-2013 Mercedes Benz CL-Class2010-2013 Mercedes Benz S-Class ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·