Car Bypass Modules & Interfaces (291)

Crux DKCR-59K Radio Replacement with Steering Wheel Retention and Dash Kit for Chrysler, Dodge & Jeep Vehicles The CRUX DKCR-59K is a premium interface for select Chrysler, Dodge & Jeep CAN BUS Vehicles. It facilitates the integration of an after-market radio to fully retain factory features in CAN Bus veicles with Amplified and Non-Amplified Systems. It also allows for a dash replacement kit. This enhanced interface is also pre-programmed for retention of steering wheel controls. General Features:  Retains factory features in select Chrysler, Dodge and Jeep vehicles while functioning with an aftermarket radio.Retains Steering Wheel Controls via built-in, pre-programmed interface.Supports amplified and non-amplified systems.Provides reverse trigger for rear view camera.Double DIN dash kit included.EIA color coded wiring for easy installation.Notes:1. The Front and Rear fading are NON-Adjustable on amplified systems.2. Also supports radio replacement in vehicles with 4.3” and 8.4” color screens.3. Does NOT retain Uconnect. Compatibility: CHRYSLER2011 – 2014 2002005 – 2010 300/300C2007 – 2009 Aspen2007 – 2010 Sebring2008 – 2016 Town & CountryDODGE2007 – 2014 Avenger2009 – 2011 Caliber2008 – 2014 Challenger2008 – 2010 Charger2008 – 2011 Dakota2008 – 2009 Durango2009 – 2016 Grand Caravan2009 – 2010 Journey2008 – 2008 Magnum2007 – 2011 Nitro2009 – 2012 RamJEEP2008 – 2010 Commander2009 – 2016 Compass2008 – 2010 Grand Cherokee2008 – 2012 Liberty2009 – 2016 Patriot2007 – 2017 Wrangler ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWR-A Steering Wheel Control Retention Interface for Vehicles with Analog SWC The CRUX SWR-A is a pre-programmed steering wheel control retention Interface. This module is compatible with most vehicles out in the market that use Analog communication General Features:  Retains Steering Wheel Controls via built-in, pre-programmed interface.Retains VR Command (Voice Recognition) function on select OEM steering wheel controls to activate CarPlay and Android Auto compatible devices.Also works on the new generation Sony Radio with CarPlay function. Compatibility: 1991-2006 BMW2003-2012 Ford2006-2014 Hyundai2003-2013 Honda2006-2014 Kia2003-2015 Mazda2005-2012 Nissan2005-2015 Subaru2003-2017 ToyotaNote: Please refer to the SWR-100 Tab on the homepage ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWR-100 Universal Steering Wheel Control Retention Interface The CRUX SWR-100 is a pre-programmed universal steering wheel control retention Interface. This module is compatible with most vehicles out in the market that use CAN, LAN, LIN, Class II, iBus, and Analog communication. Please refer to the SWR 100 Tab for your specific vehicle. General Features:  Retains Steering Wheel Controls via built-in, pre-programmed interface.Auto detects CAN, LAN, & iBUS ProtocolsRetains VR Command (Voice Recognition) function on select OEM steering wheel controls to activate CarPlay and Android Auto compatible devicesIncludes ACC Output from CAN & LAN SystemsIncludes ACC Input for iBUS and Analog SystemsCompatible with most aftermarket radios including the new generation Sony radios with CarPlay Function Compatibility: This is a universal steering wheel control retention pieceNote: Please refer to the SWR-100 Tab on the homepage ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRVL-54 Radio Replacement w/ SWC Retention for Volvo Vehicles Retains factory features in select Volvo vehicles while functioning with an aftermarket radio Retains Steering Wheel Controls via built-in, pre-programmed interface With navigation outputs (Reverse gear , Illumination and Speed signal) Provides Accessory Power ( 2A MAX ) For use with Non-amplified and Standard amplified system General Features:  Retains factory features in all CAN bus based Volvo modelsRetains Steering Wheel Controls via built-in, pre-programmed interfaceSupports Amplified and Non-Amplified SystemsEIA Color Coded Wiring for easy Installation Compatibility:VOLVO2001 – 2004 S401999 – 2009 S601999 – 2005 S802001 – 2004 V402001 – 2007 V70*2001 – 2007 XC70*2002 – 2012 XC90*/** Vehicle-Specific Notes*Compatible with CAN based vehicles only (2nd Generation / Type P26).** NOT Compatible with LIN bus and Fiber-optic systems. Please verify prior to installation. ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRVW52B Radio Replacement w/ SWC Retention for Select Volkswagen Vehicles The CRUX SOCVW-21 is a radio replacement interface for select Volkswagen vehicles. It facilitates the integration of an after-market radio to retain factory features with Amplified and Non-Amplified Systems. General Features:  Retains factory features in select Volkswagen vehicles 2002-upRetains factory-installed amplifiersWith navigation outputs (Reverse gear, Illumination and Speed signal)Provides Accessory Power ( 2A MAX )Note:This unit Does Not retain Steering Wheel Controls if you would like to retain Steering Wheel Controls please select SWRVW-52   Compatibility:VOLKSWAGEN2012-2014 Beetle2009-2014 CC2006-2012 Eos2002-2014 Golf2006-2014 GTI2002-2014 Jetta2002-2014 Passat2006-2011 Rabbit2009-2014 Tiguan2004-2010 Touareg MASERATI2004-up Quattroporte ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRVW52B Radio Replacement w/ SWC Retention for Select Volkswagen Vehicles The CRUX SWRVW-52B is a premium radio replacement interface for select Volkswagen vehicles. It facilitates the integration of an after-market radio to retain factory features for Non-Amplified Systems. This enhanced interface is also pre-programmed for retention of steering wheel controls. This unit includes an SWRVW-52B module, quadlock harness, & SWC cables General Features:  Retains factory features in select Volkswagen vehicles while functioning with an aftermarket radioRetains Steering Wheel Controls via built-in, pre-programmed interfaceRetains factory backup cameraUnit provides navigation outputs (Reverse gear, Illumination, and Speed signal) Notes:1. Driver information display will show the last information that was shown prior to removing the factory radio.2. This interface does not retain the factory Bluetooth or Sirius Satellite Radio.3. Not compatible with amplified systems. Compatibility:VOLKSWAGEN2016 – 2018 Beetle2015 – 2018 Golf / GTI2017 – 2018 Golf Alltrack2015 – 2018 Golf R2015 – 2017 Golf Sportwagen2016 – 2018 Jetta / GLI2016 – 2018 Passat2016 – 2017 Tiguan   ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRVW-52 Radio Replacement w/ SWC Retention for Volkswagen Vehicles The CRUX SWRVW-52 is a premium radio replacement interface for select Volkswagen vehicles. It facilitates the integration of an after-market radio to retain factory features with Amplified and Non-Amplified Systems. This enhanced interface is also pre-programmed for retention of steering wheel controls. General Features:  Retains factory features in all CAN bus based Volkswagen modelsRetains factory-installed amplified systems, including Touareg (2004-2007) and Fender amplified systemsRetains Steering Wheel Controls via built-in, pre-programmed interfaceWith navigation outputs (Reverse gear , Illumination and Speed signal)Provides Accessory Power ( 2A MAX )   Compatibility: VOLKSWAGEN2012-2014 Beetle2009-2014 CC2006-2012 Eos2002-2014 Golf2006-2014 GTI2002-2014 Jetta2002-2014 Passat2006-2011 Rabbit2009-2014 Tiguan2004-2010 Touareg MASERATI2004-up Quattroporte ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRTY-61S Radio Replacement w/ SWC Retention for Select Toyota Vehicles 2003-2014 The CRUX SWRTY-61S is a radio replacement interface for select Toyota vehicles. It facilitates the integration of an after-market radio to enable the retention of certain factory features when replacing a factory-installed radio and is also pre-programmed for the retention of steering wheel controls. General Features:  Retains factory features in select Toyota vehicles while functioning with an aftermarket radio. Pre-programmed to retain factory Steering Wheel Controls. iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine, and JVC radios. Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models. Supports Pick/End Calls, Pick up and Toggle between 1st and 2nd incoming calls, AVRCP Track, and Seek. Retains factory AUX Input. EIA color-coded wiring for easy installation. Note:This unit Does Not retain a factory JBL amplifier if your vehicle is equipped with a factory JBL amplifier please select SWRTY-61J Compatibility: TOYOTA 2003 – 2013 4Runner 2005 – 2011 Avalon 2007 – 2011 Camry 2004 – 2008 Camry Solara 2007 – 2010 FJ Cruiser 2008 – 2012 Highlander 2005 – 2011 Matrix 2006 – 2011 RAV4 2003 – 2011 Sequoia 2004 – 2014 Sienna 2004 – 2008 Solara 2005 – 2012 Tacoma 2003 – 2013 Tundra (2013 early production) 2009 – 2011 Venza 2008 – 2011 Yaris SCION 2005 – 2011 tC 2004 – 2007 xA 2004 – 2011 xB 2008 – 2011 xD ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Crux SWRTY-61P Radio Replacement with Steering Wheel Control and Amplifier Retention for Select Toyota Vehicles 2018-Up The CRUX SWRTY-61P is a radio replacement interface for select Toyota vehicles. It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera, auxiliary audio input, usb retention cable, the factory amplifier and is also pre-programmed for retention of steering wheel controls. General Features:  Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.– Pre-programmed to retain factory Steering Wheel Controls.– Retains factory JBL amplifier.– Retains factory back-up camera and sensors.– Retains factory bird’s eye view feature (if equipped).– Retains factory Auxiliary Audio Input.– Includes factory USB retention adapter cable.– Includes antenna adapter.Note:This unit retains factory JBL amplifer if your vehicle is not equipped with factory JBL amplifier please select SWRTY-61C Compatibility: TOYOTA2020-Up 4Runner2019-Up Avalon2018-Up Camry2019-Up CH-R2018-Up Corolla2020-Up Highlander2019-Up RAV42020-Up Sequoia2018-Up Sienna2020-Up Tacoma2020-Up TundraNOTE: For JBL amplified vehicles ONLY ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRTY-61N Radio Replacement w/ SWC & OE RVC Retention for Toyota Vehicles 2012-Up The CRUX SWRTY-61N is a radio replacement interface for select Toyota vehicles.It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera and is also pre-programmed for retention of steering wheel controls. General Features:  Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.Pre-programmed to retain factory Steering Wheel Controls.iPhone Voice Recognition (VR) feature from SWC on select radios.Retains OEM Rear View Camera.Retains factory USB and auxiliary audio input (aftermarket radio must have these features).Includes factory USB retention adapter cable.Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.EIA color coded wiring for easy installation Compatibility: SCION 2016                iM2012 – 2013   iQ TOYOTA 2013 – 2019   4Runner2012 – 2018   Avalon2012 – 2017   Camry2012 – 2019   Corolla2013 – 2019   Highlander*2009 – 2013               Matrix2012 – 2020   Prius2012 – 2018   RAV42012 – 2019   Sequoia** 2015 – 2017 Sienna2013 – 2019   Tacoma2013 – 2019   Tundra**2012 – 2016   Venza Notes: * 2013-2018 Highlander vehicles without OEM Navigation radio will NOT retain the factory back up camera. ** See Special Note on page 2 of manual.   ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRTY-61C Radio Replacement with Steering Wheel Control Retention for Select Toyota Vehicles 2018-Up    The CRUX SWRTY-61C is a radio replacement interface for select Toyota vehicles. It facilitates the integration of an after-market radio to enable the retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera, auxiliary audio input, and USB retention cable and is also pre-programmed to retain steering wheel controls. General Features: Retains factory features in select Toyota vehicles while functioning with an aftermarket radio. – Pre-programmed to retain factory Steering Wheel Controls. – Retains factory back-up camera. – Retains factory Auxiliary Audio Input. – Includes factory USB retention adapter cable. – Includes antenna adapter. Note: This unit Does Not retain a factory JBL amplifier if your vehicle is equipped with a factory JBL amplifier please select SWRTY-61P Compatibility: Toyota2020-Up 4Runner2019-Up Avalon2018-Up Camry2019-Up CH-R2018-Up Corolla2020-Up Highlander2016-Up RAV42020-Up Sequoia2018-Up Sienna2020-Up Tacoma2020-Up Tundra ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.