Car Audio Digital Signal Processor (9)

Soundstream BX-10 Digital Bass Reconstruction Processor with Remote+ Free Absolute Electrical Tape+ Phone Holder Soundstream BX-10 Digital Bass Reconstruction Processor They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, then get yourself a Soundstream Digital Bass Reconstruction Processor. The BX digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. Basically, you get more bass! Works great for music or factory radios that forgot we enjoy bass response in our systems! EDM, Banda, Rock, Jazz… No Problem! SWEEP: Select the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.WIDTH: increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.DASH CONTROL: included with this bass processor can be mounted anywhere in the vehicle, but easy adjustment from the driver seat is recommended. The output level of the Bass Equalizer can be controlled. General Features: Dash Mount Remote Control Bass Restoration Lighted Display Parametric Bass Control PFM Subsonic Filter Balanced Inputs Bass Output Control PWM High Head Room Power Supply Output Level: 13.5 volt Frequency Response: 10Hz 100KHz THD: 0.003% S/N Ratio: 130dB Balanced Input Noise Rejection: 60 dB ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audio Control DM-608 Digital signal processor — 6 inputs, 8 outputs AudioControl designed the DM-608 digital signal processor to integrate with just about any car stereo system, correct factory sound processing, and deliver customized, high-fidelity audio to your aftermarket amps, speakers, and subs. You make adjustments and save settings via your laptop (PC or Mac). General Features: digital signal processor 6 input channels, 8 outputs All controls and adjustments are accessible on your laptop (PC or Mac) via USB connection (AudioControl's Smart-User DSP software included) variable high-pass, low-pass, and bandpass filters (20-20,000 Hz at 12 or 24 dB/octave) 30-band graphic EQ, parametric filters, phase correction AccuBASS circuitry for improved bass response time delay/alignment for inputs and outputs RTA (real-time analyzers) for inputs and outputs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC1i Active 2-channel line driver/output converter Aftermarket amplifiers and DSP sound processors need clean and strong input signals, whether they come from a receiver's RCA outputs or a factory amp's speaker outputs. AudioControl's LC1i line output converter can produce up to 9.5 volts of preamp-level output in either case, acting as a line driver using its RCA inputs or as a line output converter using the speaker-level inputs. General Features: active 2-channel line driver/output converter designed to work with aftermarket and factory systems provides up to 9.5 Vrms output preamp and speaker-level inputs auto turn-on via DC offset or audio detect level control and Maximized LED indicator Other Features: load selection switch for OEM integration (20, 60, or 20,000 ohms) 12-volt turn-on lead output speaker-level inputs feature switchable load resistance to prevent factory stereo shut-down wiring, fuse, and hardware are not included with the device ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream BX-23Q Bass Processor Reconstruction with Remote + Free Absolute Electrical Tape+ Phone Holder They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, then get yourself a Soundstream Digital Bass Reconstruction Processor. The BX digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. Basically, you get more bass! Works great for music or factory radios that forgot we enjoy bass response in our systems! EDM, Banda, Rock, Jazz… No Problem! Bass Reconstruction Processor SWEEP: Select the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music. WIDTH: increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency. DASH CONTROL: included with this bass processor can be mounted anywhere in the vehicle, but easy adjustment from the driver seat is recommended. The output level of the Bass Equalizer can be controlled. General Features: BX-23Q Bass Reconstruction Processor 3-band bass frequency equalizer, 50 Hz, 125 Hz, 315 Hz @ -12 to 12dB Frequency sweep adjustment at 27-63Hz 12V max 2-channel low-level RCA input Dash-mountable remote with subwoofer level control and subsonic filter, 35-80Hz RGB LED tarantula on top Authorized Internet Dealer 1-year Manufacturer's Warranty Dash Mount Remote Control Bass Restoration Lighted Display Parametric Bass Control PFM Subsonic Filter Balanced Inputs Bass Output Control PWM High Head Room Power Supply Output Level: 13.5 volt Frequency Response: 10Hz 100KHz THD: 0.003% S/N Ratio: 130dB Balanced Input Noise Rejection: 60 dB Absolute BT1700 Vinyl Electrical Tape is a good quality, multi-purpose vinyl insulating tape. It has great resistance to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable. Details Resists abrasion, moisture, alkalis, solvents, and acids Flame-retardant and inhibits the corrosion of electrical conductors Made of durable PVC Compatible with rubber and synthetic splicing compounds Withstands a temperature range of 32 to 194 °F (0 to 90 °C) UL Listed, CSA and VDE Certified ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.