Rockford Fostgate Packages & Bundles (129)

Rockford Fosgate Two Punch P3 12" Subwoofers in a Ported Enclosure with a Punch Series P1000X1bd Amplifier Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. With its super-efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low-frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will easily drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers. General Features: Punch BD Series Monoblock Class BD Car Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel 1 ohm: 1000 watts x 1 channel CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with the 10-step set-up procedure w/ input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V On-board Punch EQ with +18dB boost @ 45Hz. Variable low-pass filter: 50-250 Hz Selectable infrasonic filter: off / 28 Hz Frequency response: 20 - 250 Hz Total Harmonic Distortion: <1.0% Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals 4 gauge power and ground wiring is recommended for installation. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1000X1bd package: P1000X1bd owner's manual Mono subwoofer amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Rockford Fosgate P3-2X12 Punch Dual P3 12" Loaded Enclosure Ported Subwoofer The P3-2X12 is a dual P3 12” vented enclosure with 1200 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Features: Subwoofer Features: 12" Punch P3 Series Subwoofers Power Handling: Peak: 2400 watts RMS: 1200 watts Recommended power range: 600 - 1400 watts RMS @ 1 ohm CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.5" voice coil w/ spun-laced Nome insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Magnet Weight: 96 oz Frequency Response: 27.7 - 250 Hz Xmax: 15.9mm Sensitivity: 85 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure Features: Dual Punch P3 12" Loaded Subwoofer Enclosure Constructed with durable 5/8" MDF High current binding posts Proprietary high-flow, low-noise port Durable black carpet covering Computer-optimized design Final Impedance: 1 ohm Dimensions: 15-3/4”D x 33-7/8”W x 15-1/8”H Shipping Weight: 89.65 Lbs. (40.66 kg) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Rockford Fosgate Prime R2D2-10 500W Max 250W RMS 10" Dual 2-Ohm R2 Prime Series Subwoofer + 10" Vented Enclosure Rockford Fosgate Prime R2 10” subwoofers provide high-performance bass at an unbelievable value. This model features a laser-etched curvilinear dust cap to dissipate heat generated by the high‐temp copper voice coil and a solid stamped steel frame with integrated frame-mounted compression terminals. Best of all, they are optimized for both sealed and vented enclosures. Car Audio Fanatics who want Rockford Fosgate quality can rely on the Prime Series 10" subwoofers to get the job done and the Dual Voice Coil provides awesome installation flexibility. These drivers can pump out the bass due to their mica-injected polypropylene cone, and their stamp-cast baskets with spider venting - typically reserved for more expensive models - keep the motor running cool! These R2 subwoofers are optimized for sealed and vented enclosures. General Features: 10" Dual 2-Ohm Prime Series Subwoofer 250 Watts RMS Power Handling 400 Watts Max Power Handling Recommended power range: 175 - 300 watts RMS CEA-2031 compliant Verified with Klippel speaker certification 12 AWG compression terminals Fiber-reinforced painted paper-pulp woofer cone High temperature 2" voice coil Laser-etched aluminum dust cap High-durability compressed foam surround Proprietary powder-coated stamped steel frame with spider cavity venting Fatigue-resistant poly-cotton spider with integral woven leads High-temperature copper voice coil with aluminum former 12 AWG compression terminals Anodized aluminum voice coil former Optimized for both sealed and vented enclosures Mica-injected polypropylene cone Linear spider with embedded 16 AWG tinsel leads StampCast basket with integrated spider venting Integrated ABS decorative trim ring Mounting Depth: 4.319" Cutout Diameter: 9.125" Magnet Weight: 43oz Frequency Response: 45 - 250 Hz Xmax: 6.5mm Sensitivity: 87 dB @ 1 watt / 1 meter Optimized for sealed enclosures Recommended Sealed Enclosure: 0.50 - 0.85ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Rockford Fosgate Prime R2D2-10 500W Max 250W RMS 10" Dual 2-Ohm R2 Prime Series Subwoofer + 10" Vented Enclosure Rockford Fosgate Prime R2 10” subwoofers provide high-performance bass at an unbelievable value. This model features a laser-etched curvilinear dust cap to dissipate heat generated by the high‐temp copper voice coil and a solid stamped steel frame with integrated frame-mounted compression terminals. Best of all, they are optimized for both sealed and vented enclosures. Car Audio Fanatics who want Rockford Fosgate quality can rely on the Prime Series 10" subwoofers to get the job done and the Dual Voice Coil provides awesome installation flexibility. These drivers can pump out the bass due to their mica-injected polypropylene cone, and their stamp-cast baskets with spider venting - typically reserved for more expensive models - keep the motor running cool! These R2 subwoofers are optimized for sealed and vented enclosures. General Features: 10" Dual 2-Ohm Prime Series Subwoofer 250 Watts RMS Power Handling 400 Watts Max Power Handling Recommended power range: 175 - 300 watts RMS CEA-2031 compliant Verified with Klippel speaker certification 12 AWG compression terminals Fiber-reinforced painted paper-pulp woofer cone High temperature 2" voice coil Laser-etched aluminum dust cap High-durability compressed foam surround Proprietary powder-coated stamped steel frame with spider cavity venting Fatigue-resistant poly-cotton spider with integral woven leads High-temperature copper voice coil with aluminum former 12 AWG compression terminals Anodized aluminum voice coil former Optimized for both sealed and vented enclosures Mica-injected polypropylene cone Linear spider with embedded 16 AWG tinsel leads StampCast basket with integrated spider venting Integrated ABS decorative trim ring Mounting Depth: 4.319" Cutout Diameter: 9.125" Magnet Weight: 43oz Frequency Response: 45 - 250 Hz Xmax: 6.5mm Sensitivity: 87 dB @ 1 watt / 1 meter Optimized for sealed enclosures Recommended Sealed Enclosure: 0.50 - 0.85ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate T1500-1bdcp Power Series mono sub amplifier 1,500 watts RMS x 1 at 2 ohms + Rockford Fosgate Power T1D412 12" Dual 4-ohm Voice Coil Component subwoofers Powerful bass performanceRockford Fosgate enjoys a well-deserved reputation for building high-quality mobile audio products. Their Power Series amps sit at the top of the car audio food chain, with proven durability and proprietary technologies that deliver stronger, more reliable performance than most other amps on the planet today. Rockford Fosgate's high-tech solutions yield more powerPower Series amplifiers actively monitor their speakers' performance using Rockford Fosgate's Constant Power technology. A speaker's impedance naturally fluctuates as it performs. So, just like your cruise control increases the engine's RPM to maintain your car's speed uphill, Constant Power maintains this amp's output by increasing its internal voltage and current when the speaker's impedance rises. This results in up to a 25% increase in the amp's total power output, especially in the crucial range below 50 Hz where a sub amp really has to shine.Rugged construction, massive bass Rockford Fosgate builds each Power Series mono amplifier with heavy-duty, state-of-the-art components. The award-winning Dynamic Thermal Management design manages the temperature of the internal components, distributing heat evenly for higher efficiency and lower distortion. The unique heat sink allows the heat to escape more readily so the high-power output transistors stay cooler and last longer. The T1500-1bdCP mono sub amp uses an efficient Class bd design to deliver up to 1,500 watts to your subwoofer system from a remarkably compact chassis. This amp can even drive a 1-ohm load, so you can get massive bass out of a wide variety of system designs. The variable 24/dB per octave crossover creates a more natural-sounding transition from your speakers to your subs. And the 2-year warranty tells you that Rockford Fosgate stands behind this bass behemoth. Product highlights: mono subwoofer amplifier 1,000 watts RMS x 1 at 4 ohms (1,500 watts RMS x 1 at 2 ohms) 1,500 watts RMS x 1 at 1 ohm CEA-2006 compliant Dynamic Thermal Management cooling system variable low-pass filter (35-250 Hz, 24 dB/octave) selectable subsonic filter (28Hz, 24 dB/octave) variable bass boost (0-18 dB at 45 Hz) optional wired remote bass boost Class-BD amplifier design MOSFET power and output stages preamp-level inputs and outputs 4-gauge power and ground leads and a 200-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 200-amp in-line fuse between the distribution block and the amplifier is recommended 14-15/16"W x 2-1/4"H x 8-15/16"D warranty: 2 years ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate P1683 6x8" 130W 3 Way + P1692 6x9" 150W 2 Way Speakers We are an authorized Rockford Fosgate dealer! The P1683 is a 6”x8” 3-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers, integrated high pass crossovers, and mounting hardware. General Features: 6" x 8" Punch Series 3-way Full Range Speakers Power Handling: Peak: 260 watts per pair / 130 watts each RMS: 130 watts per pair / 65 watts each Recommended power range: 10 - 70 watts RMS per channel Injection-molded mineral-filled polypropylene cone Butyl rubber surround 0.75" PEI Dome tweeter Flexfit basket design OEM Adapter plate included The recessed tweeter mount uses a standard 1-3/4" hole CEA-2031 compliant speaker Top-mount Depth: 2.28" 4 ohms impedance Frequency Response: 65 - 24,000 Hz Sensitivity: 90dB Authorized Internet Dealer 1-year Manufacturer's Warranty Rockford Fosgate Punch P1692 Car Speaker 300W Peak, 150W RMS 6x9" 2-Way Punch Series Full Range Coaxial Speakers The P1692 is a 6”x9” 2-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware.Fanatics that need a great-sounding speaker to replace factory-installed garbage will certainly benefit from this Punch series full-range speaker. The P1692 offers a Flex Fit™ basket to ensure compatibility with oddly shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6" x 9" Punch Series 2-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 15 - 75 watts RMS per channel VAST (Vertical Attach Surround Technique) butyl Rubber surround Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 3/4" Treated PEI dome tweeter StampCast frame structure Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Cutout Dimensions: 5.77" x 8.51" Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Includes grill and mounting hardware Frequency Response: 60 - 22,000 Hz Top-mount Depth: 3.07" Sensitivity: 91dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P1692 package: P1692 owner's manual Two 2-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Speed clips Installation & Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate P1650 6.5" 110W + P1692 6x9" 150W Car Audio Speakers Fanatics that need a great-sounding speaker to replace factory-installed versions will certainly benefit from this Punch series full-range speaker. The P1650 & P1692 offer a Flex Fit2™ basket to ensure compatibility with U.S., European, and import vehicles. European installers will love this new "European Basket" to easily fit a variety of VW, Citroen, and Vauxhall models. The system also features an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. Rockford Punch P1650 220W Max 6.5" 2-Way P1 Punch Series Coaxial Speakers w/ PEI Dome Tweeter The Punch P1650 is a P1 full-range speaker system featuring a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles, and a coaxial-mounted tweeter. General Features: 6-1/2" P1 Punch Series 2-Way Car Speakers Power Handling: Peak: 220 watts per pair / 110 watts each RMS: 110 watts per pair / 55 watts each Recommended power range: 10 - 55 watts RMS per channel Injection-Molded Carbon Fiber-filled Polypropylene cone material 3/4" PEI Dome Tweeter Santoprene rubber surround CEA-2031 compliant speakers 1" high-temperature voice coil Integrated ICC crossover filter removes unwanted frequencies from the drivers DDC (Discreet Dual Clamp) provides concentric clamping pressure to maximize fitment FlexFit (Slot Mounted Frame Pattern) allows slight adjustment of the speaker when mounted VAST (Vertical Attach Surround Technique) provides up to 25% more effective radiating cone area Rubber magnet boot cover Grilles and mounting hardware included 4 ohms impedance Frequency response: 45 - 20,000 Hz Top-mount depth: 2-1/4" Sensitivity: 88dB Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Two 2-way speakers 2 Grilles Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) Rockford Fosgate P1650 owner's manual Rockford Fosgate Punch P1692 Car Speaker 300W Peak, 150W RMS 6x9" 2-Way Punch Series Full Range Coaxial Speakers The P1692 is a 6”x9” 2-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware.Fanatics that need a great-sounding speaker to replace factory-installed garbage will certainly benefit from this Punch series full-range speaker. The P1692 offers a Flex Fit™ basket to ensure compatibility with oddly shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6" x 9" Punch Series 2-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 15 - 75 watts RMS per channel VAST (Vertical Attach Surround Technique) butyl Rubber surround Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 3/4" Treated PEI dome tweeter StampCast frame structure Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Cutout Dimensions: 5.77" x 8.51" Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Includes grill and mounting hardware Frequency Response: 60 - 22,000 Hz Top-mount Depth: 3.07" Sensitivity: 91dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P1692 package: P1692 owner's manual Two 2-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Speed clips Installation & Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate P1572 5x7" 120W + P1692 6x9" 150W 2 Way Car Speakers Rockford Fosgate Punch P1692 Car Speaker 300W Peak, 150W RMS 6x9" 2-Way Punch Series Full Range Coaxial Speakers The P1692 is a 6”x9” 2-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware.Fanatics that need a great-sounding speaker to replace factory-installed garbage will certainly benefit from this Punch series full-range speaker. The P1692 offers a Flex Fit™ basket to ensure compatibility with oddly shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6" x 9" Punch Series 2-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 15 - 75 watts RMS per channel VAST (Vertical Attach Surround Technique) butyl Rubber surround Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 3/4" Treated PEI dome tweeter StampCast frame structure Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Cutout Dimensions: 5.77" x 8.51" Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Includes grill and mounting hardware Frequency Response: 60 - 22,000 Hz Top-mount Depth: 3.07" Sensitivity: 91dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P1692 package: P1692 owner's manual Two 2-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Speed clips Installation & Operation manual Rockford Fosgate Punch P1572 240W Peak (120W RMS) 5" x 7" / 6" x 8" Punch Series 2-way Coaxial SpeakersThe P1572 is a 5”x7” 2-way full-range speaker rated at 60 watts RMS designed for fanatics needing a quality factory replacement. Includes two speakers with adapter plates, integrated high-pass crossovers, and mounting hardware.General Features: 5" x 7" Punch Series 2-Way Car Speakers Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Mineral-filled and polypropylene injection molded cone Butyl rubber surround PEI dome tweeter ICC Crossover hides the crossover for installation without the hassle and a clean look VAST surround provides up to 25% more surface area of the cone Includes an OEM 6" x 8" adapter plate for simple installation 4 ohms impedance Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Two 5x7 Two-way speakers Two 6x8 Adapter brackets Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) Rockford Fosgate P1572 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

    2 Rockford Fosgate P1692 6x9 150W Speakers + 2 Absolute Angled 6x9 Speaker Box Rockford Fosgate Punch P1692 Car Speaker 300W Peak, 150W RMS 6x9" 2-Way Punch Series Full Range Coaxial Speakers + 2 Absolute Angled 6x9 Speaker BoxThe P1692 is a 6”x9” 2-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware.Fanatics that need a great-sounding speaker to replace factory-installed garbage will certainly benefit from this Punch series full-range speaker. The P1692 offers a Flex Fit™ basket to ensure compatibility with oddly shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6" x 9" Punch Series 2-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 15 - 75 watts RMS per channel VAST (Vertical Attach Surround Technique) butyl Rubber surround Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 3/4" Treated PEI dome tweeter StampCast frame structure Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Cutout Dimensions: 5.77" x 8.51" Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Includes grill and mounting hardware Frequency Response: 60 - 22,000 Hz Top-mount Depth: 3.07" Sensitivity: 91dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P1692 package: P1692 owner's manual Two 2-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Speed clips Installation & Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.ca.gov

Rockford Fosgate 500W Punch Single P1 10 Inch Loaded Subwoofer Enclosure(2 Pack) General Features: High flow, low noise port Connects to speakers up to 10 AWG compression terminals Conforms to CEA-2031 standards Klippel verified Dimensions: 13.125 x 17 x 15.125 inches Details: Rockford Fosgate created the Punch series subwoofers and enclosures for an easy-to-install bass system to upgrade your factory subs. The Punch Single P1 10-Inch Loaded Enclosure includes a 500-watt sub in a 5/8-inch MDF constructed enclosure with high-density carpet. The vented enclosure is tuned by computer-aided design software for similar tonal performance to the P2 and P3 but is easier to move in and out of vehicles. This sub features 250 watts RMS of power handling and a 4-ohm load. The enclosure features high flow low, noise port, and quick-release compression terminals. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

4 Rockford Fosgate P2D2-10 10 Inch 600 Watt 2-Ohm Punch Series Car Audio Subwoofer P2D210 (4 Pack) Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10-inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features: 10" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 600 watts Power Handling: RMS: 300 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Rockford Fosgate P2 Series Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 29 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @40.0 Hz Recommended Sealed Enclosure: 0.59ft³ @46.6 Hz Matching Amplifiers: (one driver) Matching Amplifiers: (one driver) Rockford Fosgate R500X1D, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P300X2 (bridged), Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P400X1, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate R750-1D, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P1000X1BD, Series @4ohms Matching Amplifier: (two drivers) Rockford Fosgate R500X1D, Series/Parallel @2ohm Matching Amplifier: (two drivers) Rockford Fosgate R750-1D, Series/Parallel @2ohm Matching Amplifier: (two drivers) Rockford Fosgate P1000X1BD, Series/Parallel @2ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P2D2-15 1600w 15" Subwoofers+Absolute DSS15 Sealed Sub Box Enclosure Rockford Fosgate Punch P2D2-15 Punch P2 DVC 2 Ohm 15-Inch 400 Watts RMS 800 Watts PeakRockford Fosgate has always been known as "The PUNCH," and the P2 15" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features: 15" Dual 2 ohm Punch Stage Subwoofer Power Handling: Recommended power range: 150 - 400 watts RMS (800 watts peak power) CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 7.34" Cutout Diameter: 13.9" Magnet Weight: 81 oz Frequency Response: 20.9 - 250 Hz Xmax: 12.2mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 2.66 cubic feet Recommended Sealed Enclosure: 1.3 to 3.5 cubic feet Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 20 Ibs What's in the P2D2-15 package: P2D2-15 owner's manual One 15" Dual 2-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 2 Rockford Fosgate P3D4-15 Punch P3 15" dual 4-ohm voice coils 1200 Watts Car Subwoofers + Absolute VEGD15 Ported Sub Box Enclosure The P3D4-15 is the best-performing Rockford Fosgate Punch series subwoofer. The P3 15” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.The P3D4-15 is Rockford Fosgate's best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones, dust caps, and unique spider venting to keep the motor more relaxed than in previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. General Features: 15" Dual 4 ohm Punch Stage 3 Subwoofer Peak Power Handling: 1200 watts RMS Power Handling: 600 watts Recommended power range: 300 - 700 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.5" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 7.58" (192.5 mm) Cutout Diameter: 13.94" (353 mm) Magnet Weight: 96 oz Frequency Response: 21.7 - 250 Hz Xmax: 15.2mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 2.66ft³ Recommended Sealed Enclosure: 1.58ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty Shipping Weight: 23.3 Lbs. (10.56 kg) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.