

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AudioControl LC2i PRO 2-channel line output converter+ Electrical Tape+ Phone Holder
$139.00
$219.99
AudioControl LC2i PRO 2-channel line output converter+ Free Absolute Electrical Tape+ Phone Holderr
High-level input line output converter
More and more aftermarket amplifier installations depend on using the factory amp's powered outputs for its inputs. AudioControl's LC2i PRO line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can then be fed to another processor, a full-range amplifier, or your subwoofer amp.
Bass feature
Some factory radios dial down the bass as you increase the volume to protect the flimsy factory speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i PRO with their AccuBASS™ circuitry that reverses the factory low-frequency roll-off, giving you the bass you need to enjoy your music to the fullest.
Installation conveniences
The included dash-mount wired remote control allows you to adjust the level of your subchannel on the go. Load selection switches make OEM integration easier, so the LC2i PRO will work with almost any factory sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio sense, or remote 12-volt inputs.
Product highlights:
2-channel active line output converter
ACR-1 wired remote bass level control included
Two speaker-level inputs with 40-volt (400 watts RMS) power handling
Main and Bass preamp-level outputs (up to 9.5 volts)
Main and Bass output controls for level matching
adjustable AccuBASS corrects for factory bass roll-off
More Info:
selectable turn-on options: GTO signal Sense (DC offset), audio sense, or remote 12-volt input
12-volt turn-on lead output
recommended fuse rating: 1 amp
dimensions: 6-15/16"W x 1"H x 3"D
weight: 0.75 pound
warranty: 5 years
Two-channel line output converter
Two 4-pin captive-screw connectors (installed)
ACR-1 Level control
16.5' Level-control cable (RJ-14)
Quickstart guide (on cardboard label)
Absolute BT1700 Vinyl Electrical Tape is a high-quality, multi-purpose vinyl insulating tape that is highly resistant to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable.
Details
Resists abrasion, moisture, alkalis, solvents, and acids
Flame-retardant and inhibits the corrosion of electrical conductors
Made of durable PVC
Compatible with rubber and synthetic splicing compounds
It withstands a temperature range of 32 to 194 °F (0 to 90 °C)
UL Listed, CSA and VDE Certified
Specifications
Adhesive Type
Rubber
Application
Insulation
Brand
Absolute
Elongation at Break
200 %
Maximum Operating Temperature (Celsius)
90 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
194 Degree Fahrenheit
Minimum Operating Temperature (Fahrenheit)
32 Degree Fahrenheit
Overall Length (Imperial)
60 ft
Overall Length (Metric)
18 m
Overall Width (Imperial)
0.75 in
Overall Width (Metric)
19 mm
Product Color
Black
Shelf Life
5 Year
Tape Grade
General Use
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AudioControl The Epicenter Micro Bass restoration processor and line output converter
$199.00
$369.99
AudioControl The Epicenter® Micro Bass restoration processor and line output converter
Add bass to your aftermarket system's high-level sourceMost factory radios dial down deep, low-hitting bass notes to protect flimsy factory speakers. The Epicenter Micro from AudioControl takes amplified speaker-level signals, converts them into the high-quality preamp signals your sub amp needs, and then adds the bass that's missing. Even when listening to traditionally bass-weak classical, jazz, folk, or Tejano music, you'll finally be able to hear all the good bass you've been missing.
How does it do it?
Sophisticated processing analyzes the incoming signal and synthesizes low-bass fundamental tones, increasing bass response tremendously. A single band ParaBASS® equalizer lets you fine-tune your subwoofer's tone. A selectable subsonic filter removes extremely low frequencies so your amps and subs will play more efficiently.
The Epicenter Micro will also connect to any receiver with preamp outputs — its balanced inputs will reject noise from your car's electrical system for ultra-clean output.
Installation conveniences The included ACR-4 dash-mount wired remote control allows you to adjust the level of your sub channel on the go. Load selection switches make OEM factory system integration easier, so the Epicenter Micro will work with almost any vehicle's sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio signal, or remote 12-volt input.
Product highlights:
active 2-channel line driver/output converter with bass restoration
designed to work with aftermarket and factory systems
provides up to 9.5 Vrms output (selectable level: 5, 7, 10V)
preamp and speaker-level inputs
speaker-level inputs handle up to 40V (400 watts RMS)
speaker-level inputs feature switchable load resistance (20, 60, or 20,000 ohms) to prevent factory stereo shut-down
Epicenter bass restoration increases bass response
Para-Bass controls adjust center frequency and width of bass EQ processing
More info:
ACR-4 wired remote included
switchable Programmable Frequency Match (PFM) subsonic filter (20 Hz, 12/dB octave)
Selectable ground isolation helps eliminate noise
auto turn-on via 12V remote, DC offset, or audio signal detect
12-volt turn-on lead output
wiring, fuse, and hardware not included with the device
18-gauge power and ground leads and a 1-amp fuse are recommended
dimensions: 5-1/8" W x 1" H x 3" D
warranty: 5 years
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BX-10W Digital Bass Reconstruction Processor with Remote (White)+ Free Absolute Electrical Tape+ Phone Holder
$89.99
$149.99
Soundstream BX-10W Digital Bass Reconstruction Processor with Remote (White)+ Free Absolute Electrical Tape+ Phone Holder
Soundstream BX-10W Digital Bass Reconstruction Processor
They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, then get yourself a Soundstream Digital Bass Reconstruction Processor.
The BX digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. Basically, you get more bass! Works great for music or factory radios that forgot we enjoy bass response in our systems! EDM, Banda, Rock, Jazz… No Problem!
SWEEP: Select the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.WIDTH: increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.DASH CONTROL: included with this bass processor can be mounted anywhere in the vehicle, but easy adjustment from the driver seat is recommended. The output level of the Bass Equalizer can be controlled.
General Features:
Dash Mount Remote Control
Bass Restoration Lighted Display
Parametric Bass Control
PFM Subsonic Filter
Balanced Inputs
Bass Output Control
PWM High Head Room Power Supply
Output Level: 13.5 volt
Frequency Response: 10Hz 100KHz
THD: 0.003%
S/N Ratio: 130dB
Balanced Input Noise Rejection: 60 dB
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
BLAUPUNKT EP1200X CAR AUDIO DIGITAL BASS RECONSTRUCTION PROCESSOR w/ REMOTE
$49.99
$99.99
Blaupunkt EP1200X Car Audio Digital Bass Reconstruction Epicenter Processor with RemoteWant your music to have all the bass you desire? This product removes the bass sound lost in recording and compresses the signal to make MP3 files. With the EP1600XW, you will hear loud and low bass that you never knew existed on your music recordings!Dash-mount remote control for pfm subsonic filter & bass level controls makes all music come Alive with total Frequency low bass. Restores the ground-shaking power and pounding bass your subwoofers were meant to put out! Give your subwoofers the signal to go lower and hit harder. Remote level control lets you decide how loud the bass is Relative to the rest of the music. The sub-sonic filter ensures that the bass you want is all you hear!General Features:
PWM High Head Room Power Supply - Parametric Bass Boost
Variable Bandwidth Adjustment - Dash Mount Remote Control
Digital Bass Driver/Restoration Processor -Delivers maximum bass control
Dash remote control included - Parametric bass control
Balanced input circuitry minimizes induced noise
Maximum Input Level: 15V RMS
Maximum Output Level: 13.5V Peak
Frequency Response: 10Hz - 20k Hz
Total Harmonic Distortion: 0.003%
Signal Noise to Ratio: 130 dB
Input Impedance: 10K Ohms
Output Impedance 150 Ohms
Power Supply: High Headroom PWM
Power Draw: 150 mA
Recommended Fuse Rating: 1 Amp
What is in the EP1200X package:
EP1200X owner's manual
Blaupunkt EP1200X
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Blaupunkt EP1200X Car Audio Digital Bass Reconstruction Epicenter Processor with Remote
$59.99
$99.99
Blaupunkt EP1200X Car Audio Digital Bass Reconstruction Epicenter Processor with RemoteWant your music to have all the bass you desire? this product puts back the bass sound that was lost in recording and compressing the signal to make MP3 files. With the EP1600XW you will hear loud and low bass that you never knew existed on your music recordings!Dash-mount remote control for pfm subsonic filter & bass level controls makes all music come Alive with full Frequency low bass. Restores the ground-shaking power and pounding bass your subwoofers were meant to put out!. give your subwoofers the signal to go lower and hit harder. Remote level control lets you decide how loud the bass is Relative to the rest of the music. The sub-sonic filter makes sure that the bass you want to hear is all you hear!General Features:
PWM High Head Room Power Supply - Parametric Bass Boost
Variable Bandwidth Adjustment - Dash Mount Remote Control
Digital Bass Driver/Restoration Processor -Delivers maximum bass control
Dash remote control included - Parametric bass control
Balanced input circuitry minimizes induced noise
Maximum Input Level: 15V RMS
Maximum Output Level: 13.5V Peak
Frequency Response: 10Hz - 20k Hz
Total Harmonic Distortion: 0.003%
Signal Noise to Ratio: 130 dB
Input Impedance: 10K Ohms
Output Impedance 150 Ohms
Power Supply: High Headroom PWM
Power Draw: 150 mA
Recommended Fuse Rating: 1 Amp
Package Include:
Blaupunkt EP1200X
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.go