Alpine (850)

Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. It's a great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the BBX-F1200 package: BBX-F1200 owner's manual Four-Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Including factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on the box Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine SXE-1751S 6.5" 280 Watts 2-Way Component Speakers General Features: Rated Power: 45 Watts Peak Power: 280 Watts Nominal Impedance: 4 Ohms Frequency Response: 60Hz - 20,000 Hz Ferrite Woofer Neodymium Tweeter Kapton Voice Coil Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the SXE-1751S package: 6.5" Speakers (2) Grilles (2, detached) Mounting screws (8) Mounting screws (8) Speaker connection cables (2) User manual SXE-1751S owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine R2-SB10V Loaded 10" 750w R2-W10D4 Subwoofers + Ported Sub Enclosure Box Alpine R2-SB10V R-Series Single Type R2 10-in Subwoofer in Vented Enclosure Enclosure Stacking FeaturesUnique to Alpine, the subwoofer enclosures are available in 10-inch and 12-inch sizes, offered in either single or “linked” formats, with an optional mounting bracket. This innovative design enables the discerning consumer to add more bass to their system easily.Optimized PerformanceThe ported enclosure design delivers a higher total sound output, providing deep, powerful bass, reliable sound reproduction, and overall excellent sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz, for optimized performance with Alpine’s S-Series and R-Series subwoofers.General Features: Includes R2-W10D4 wired in parallel 750W RMS power handling 2 Ohm Impedance Ported Enclosure Design Frequency Response: 24-200Hz Vent Tuning Frequency: 35Hz Dimensions: 16” W x 12.6825” H x 14.5” D Authorized Dealer 1-year Warranty Alpine KTX-H10 Linking Kit When it comes to bass, two is always better than one. Alpine's KTX-H10 linking kit allows you to connect two Alpine subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to securely connect the enclosures, along with all the necessary hardware. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year.What is in the box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-S65 (R2S65) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil, which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and a reduced footprint, which contributes to more straightforward installation. General Features: 6.5" R-Series 2-way Coaxial Car Speakers carbon-fiber-reinforced polymer (CFRP) woofer Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.48" Cutout Dimensions: 5.31" Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the R2-S65 package: R2-S65 owner's manual Two 2-way Speakers Two multi-purpose adapter rings 2 Grilles 8 Speed clips Warranty information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine UTE-73BT In-Dash Digital Media Receiver with Bluetooth and Pandora Control + Cerwin Vega H7653 6.5" 3-Way 340 Watts Coaxial Speaker Alpine UTE-73BT In-Dash Digital Media Receiver with Bluetooth and Pandora Control General Features: Bluetooth and Pandora In-Dash Digital Media Receiver Peak Power Handling: 50 watts x 4 channels RMS Power Handling: 18 watts x 4 channels Pandora Link integrates your car stereo receive with your iPhone and Pandora Internet Radio Detachable faceplate White LCD text fluorescent display Wireless remote control sold separately Blue button lighting Speaker Kit CEA-2006 compliant amplifier iPod USB cable included AM/FM tuner with 12FM/6 AM presets Local/Distance Tuning: Allows the stereo to only tune to strong signals or to allow both strong and distant weak signals 3-Band parametric equalizer with seven selectable tone curves (6 Preset, 1 User) Variable high-pass filter: 60Hz, 80Hz, 120Hz, 160Hz, or Off Variable low-pass filter: 60Hz, 80Hz, 120Hz, 160Hz, or Off iTunes Tagging lets you tag and download songs you hear on satellite radio Loudness: Will bring out the high and low frequency to compensate for the ear's decreased sensitivity at lower volumes Audio Mute allows you to lower the volume by 20db instantly Authorized Internet Dealer Cerwin Vega H7653 HED Series 3-Way Coaxial Speakers 6.5", 340 Watts Max General Features: 6.5" HED Series 3-Way Car Speakers Peak: 680 watts per pair / 340 watts each RMS: 120 watts per pair / 60 watts each Graphite-injected reinforced polypropylene cone Rubber surround 1" balanced dome PEI black polypropylene tweeter 1/2" Balanced dome PEI polypropylene tweeter Voice coil size and type Top-mount Depth: 2.24" Cutout Dimensions: 5.7" 4 ohms impedance Frequency Response: 55 – 20,000 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier & 2 Pairs Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set 2 Pairs Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-A36F 600W Next Generation S-Series Hi-Res Class-D 4-Channel Car Amplifier General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier & Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-A36F 600W Next Generation S-Series Hi-Res Class-D 4-Channel Car Amplifier General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine UTE-73BT Mech-Less Digital Bluetooth Media Receiver with 2 Pair Alpine S2-S80C Type S 8" Component Speakers  Alpine UTE-73BT In-Dash Digital Media Receiver with Bluetooth and Pandora Control Do you store your music on your smartphone? The UTE-73BT supports various file formats, including those streamed from a phone, digital player, Pandora account, or USB drive. General Features: Bluetooth and Pandora In-Dash Digital Media Receiver Peak Power Handling:50watts x 4 channels RMS Power Handling:18watts x 4 channels Pandora Link integrates your car stereo with your iPhone and Pandora Internet Radio Detachable faceplate White LCD text fluorescent display Wireless remote control sold separately Blue button lighting CEA-2006 compliant amplifier iPod USB cable included AM/FM tuner with 12FM/6 AM presets Local/Distance Tuning: Allows the stereo to only tune to strong signals or to allow both strong and distant weak signals 3-Band parametric equalizer with seven selectable tone curves (6 Preset, 1 User) Variable high-pass filter:60Hz,80Hz,120Hz,160Hz, or Off Variable low-pass filter:60Hz,80Hz,120Hz,160Hz, or Off iTunes Tagging lets you tag and download songs you hear on satellite radio Loudness: Will bring out the high and low frequencies to compensate for the ear's decreased sensitivity at lower volumes Audio Mute allows you to lower the volume by 20db instantly Authorized Internet Dealer 2 Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

2 Pair Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set Unparalleled Performance: The S2-S80C is meticulously crafted using a unique combination of polypropylene, Glass Fiber, and Mica Cone materials. This construction ensures lightweight design, high output, and low distortion, resulting in a clean and precise audio experience that exceeds expectations. Enhanced Bass Response: Immerse yourself in powerful and accurate bass notes thanks to the integration of Alpine's exclusive High Amplitude Multi-Roll (HAMR) surround technology. This innovation enables maximum cone movement, delivering deep and impactful low-frequency performance. Versatile Tweeter Design: The S2-S80C includes 1" tweeters with threaded removable housing, allowing for flexible placement and easy customization of the speaker setup. Achieve optimal sound staging and imaging by adjusting the tweeters to suit your listening preferences. Seamless Integration: With an 8" woofer size, in-line crossovers, and OEM fitment, the S2-S80C component speaker set offers seamless integration into your vehicle's audio system. Experience an upgrade in sound quality while maintaining a factory-like appearance. General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-S80C package: S2-S80C owner's manual 2 Woofers 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Warranty information Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine S2-A60M S-Series Class-D Amp, S2-W10D2 10" S-Series Dual 2-Ohm Car Sub bundle This bundle includes: Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase, Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer General Features: 10" subwoofer with dual 2-ohm voice coils carbon fiber/polypropylene cone with HAMR rubber surround frequency response: 23-215 Hz power handling: 600 watts RMS (300 watts per coil) peak power handling: 1,800 watts sensitivity: 86.2 dB sealed box volume: 0.4-0.85 cubic feet ported box volume: 0.75-1.3 cubic feet Twist-lock grille mount system Poly Propylene / Ceramic Dust Cap 2.6" High-Temperature Copper Voice coil 15 mm Xmax 64 oz. Single Stacked Ferrite magnet motor structure Top-mount depth: 4.54" Cutout diameter: 8.94" Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Alpine S2-A60M S-Series Class-D Amp, S2-W10D2 10" S-Series Dual 2-Ohm Car Sub & Grill bundle This bundle includes: Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier Alpine KTE-10G.3 Grille for 10" Type-R and Type-S subwoofers Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase, Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer General Features: 10" subwoofer with dual 2-ohm voice coils carbon fiber/polypropylene cone with HAMR rubber surround frequency response: 23-215 Hz power handling: 600 watts RMS (300 watts per coil) peak power handling: 1,800 watts sensitivity: 86.2 dB sealed box volume: 0.4-0.85 cubic feet ported box volume: 0.75-1.3 cubic feet Twist-lock grille mount system Poly Propylene / Ceramic Dust Cap 2.6" High-Temperature Copper Voice coil 15 mm Xmax 64 oz. Single Stacked Ferrite magnet motor structure Top-mount depth: 4.54" Cutout diameter: 8.94" Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine KTE-10G.3 Grille for 10" Type-R and Type-S subwoofers General Features: 10" Protective Subwoofer Grille Works with Alpine R2-W10D4 and R2-W10D2 10" subwoofers Includes metal mesh grille  Authorized Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.