Alpine (868)

Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW. General Features: Alpine KTA-450 Class D 4-channel Weather Resistant Power Pack Amplifier CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category Power Handling 50W RMS x 4 @ 4 Ohms 45W RMS x 4 @ 2 Ohms Total Power Handling: 200W RMS CTA-2006 compliant Frequency Response: 15-50 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels Fuse Rating: 15A Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-450 Package: KTA-450 Package owner's manual 4-Channel amplifier Wiring harness Mounting plate 2 Mounting brackets 4 Wire-ties 4 Hex-head machine screws 2 Pan-head machine screws 4 Pan-head self-tapping screws Warranty Information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine iLX-407 Shallow Chassis 7 Inch Multimedia Receiver with Apple Carplay Alpine's iLX-407 digital multimedia receiver fits a wide array of dashes thanks to its shallow chassis design, but the feature set this command center packs is anything but thin. It works with both Apple CarPlay® and Android Auto™ for convenient control of your favorite smartphone functions, and it offers a bevy of entertainment options for the discerning road warrior. Best of all, it works with Alpine's bodacious PowerStack amplifiers to boost your system's performance without the hassle of a full-blown amp installation.Perfect for PowerStack ampsGeneral Features: digital media receiver with AM/FM tuner (does not play discs) 7" capacitive touchscreen fits double-DIN dash openings Bluetooth hands-free calling and audio streaming HD Radio tuner built-in Smartphone Features (see Details for info on compatibility with specific smartphones and apps): Apple CarPlay and Android Auto are compatible built-in iPod, iPhone, and iPad control playback and control of music files on compatible Android devices Audio/video Features: plays MP3, WMA, AAC, WAV, and FLAC music files (see Details for full capabilities) plays AVI and MPEG4 video files 5-band graphic equalizer with time correction 10 EQ curve presets high- and low-pass filters Bass Engine SQ MediaXpander HD Expandability: works with SiriusXM SXV300 tuner—supports Tune Mix, Traffic & Weather Now, and Sports Flash features compatible with the optional Alpine DVE-5300 DVD player works with Alpine PowerStack amplifiers in most dash openings inputs: rear USB port, rear HDMI input, rear 3.5mm mini A/V input, front- and rear-view camera inputs outputs: rear composite video output; 6-channel preamp outputs 4-volt front, rear, subwoofer Other Information: wired connection to the parking brake is required to access settings, video display, and other features on this receiver  built-in internal amp (16 watts RMS CTA-2006 x 4 channels/50 watts peak) compatible with most factory steering wheel audio controls (adapter required) compatible with iDatalink Maestro retains factory features in a wide selection of vehicles displays engine performance data on a touchscreen warranty: 1 year MFR # ILX-407 What's in the iLX-407 package: iLX-407 owner's manual Digital multimedia receiver Wiring harness (15A fuse) Preout/Camera harness Video in/out of the harness iDatalink harness 41" USB extension cable Microphone Bracket for microphone 4 ISO-screws Quick Reference Guide ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp delivers high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs What's in the BBX-T600 package: BBX-T600 owner's manual Two-channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine iLX-W670 7" Car Radio Stereo + TOYK983S TWH-950 install Kit & Harness for 2007-2011 Toyota Camry & Absolute CAM1800B Rear View Camera Alpine iLX-W670 7" Car Radio Stereo Apple CarPlay/Android Auto Receiver with 7" Touchscreen and Bluetooth, Double DIN General Features: digital media receiver with AM/FM tuner (does not play CDs) shallow-mount chassis design (2-13/16" deep) designed to pair with Alpine's KTA-450 power pack amplifier touchscreen swipe controls external Bluetooth microphone designed to work with Apple CarPlay and Android Auto hands-free control lets you access apps using your voice built-in Bluetooth connectivity USB port accommodates various devices and thumb drives FLAC Compatible inputs: rear USB port, two camera inputs works with SiriusXM satellite radio tuner (not included-subscription required) outputs: 6-channel preamp outputs (4-volt front, rear, subwoofer) American International TOYK983S Dash Kit Single /Double-DIN radios (Silver), TWH-950 Wire Harness Compatible Models Toyota 2007 - 2011 TOYOTA2007 - 2011 Camry (without JBL System )TOYK983S Dash Kit Single /Double-DIN radios (Silver) Painted to match the car's interior For single or double DIN car radios Durable ABS construction Gapless installation Includes storage compartment above radio for single DIN installations 2007-2011 Toyota Camry Dash Kit Silver Installation Dash Kit for Single or Double DIN Headunits Includes a storage pocket below the radio for single DIN mounting Accommodates ISO Single DIN mount Accommodates ISO Double DIN mount Gapless fit between the dash and the kit Painted to match the factory dash color Factory-matched texture style Factory look when complete Finest material for good fit and durability American International TWH-950 Wire Harness Interchange Part Number: American International TWH950, Metra 70-1761, Scosche TA02B General Features: The harness is used when installing an aftermarket stereo Connects the aftermarket stereo harness to the vehicle factory harness Designed specifically to fit the compatible vehicles Plugs into the factory harness without cutting any wires Standard color-coded wires provide a consistent and simplified installation Made from OEM quality materials Compatible with Select 1987-2008 Toyota Vehicles Metra Equivalent: Metra 70-1761 *** NOT FOR JBL OR FACTORY AMPLIFIED VEHICLES ****** For Vehicles with Silver Dash *** FITS THE FOLLOWING VEHICLES: Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine UTE-73BT In-Dash Digital Media Receiver with Bluetooth and Pandora Control + Cerwin Vega H7653 6.5" 3-Way 340 Watts Coaxial Speaker Alpine UTE-73BT In-Dash Digital Media Receiver with Bluetooth and Pandora Control General Features: Bluetooth and Pandora In-Dash Digital Media Receiver Peak Power Handling: 50 watts x 4 channels RMS Power Handling: 18 watts x 4 channels Pandora Link integrates your car stereo with your iPhone and Pandora Internet Radio Detachable faceplate White LCD text fluorescent display Wireless remote control sold separately Blue button lighting CEA-2006 compliant amplifier iPod USB cable included AM/FM tuner with 12FM/6 AM presets Local/Distance Tuning: Allows the stereo to only tune to strong signals or to allow both strong and distant weak signals 3-Band parametric equalizer with seven selectable tone curves (6 Preset, 1 User) Variable high-pass filter: 60Hz, 80Hz, 120Hz, 160Hz, or Off Variable low-pass filter: 60Hz, 80Hz, 120Hz, 160Hz, or Off iTunes Tagging lets you tag and download songs you hear on satellite radio Loudness: Will bring out the high and low frequency to compensate for the ear's decreased sensitivity at lower volumes Audio Mute allows you to lower the volume by 20db instantly Authorized Internet Dealer Cerwin Vega H7653 HED Series 3-Way Coaxial Speakers 6.5", 340 Watts Max General Features: 6.5" HED Series 3-Way Car Speakers Peak: 680 watts per pair / 340 watts each RMS: 120 watts per pair / 60 watts each Graphite-injected reinforced polypropylene cone Rubber surround 1" balanced dome PEI black polypropylene tweeter 1/2" Balanced dome PEI polypropylene tweeter Voice coil size and type Top-mount Depth: 2.24" Cutout Dimensions: 5.7" 4 ohms impedance Frequency Response: 55 – 20,000 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier & 2 Pairs Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set 2 Pairs Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-A36F 600W Next Generation S-Series Hi-Res Class-D 4-Channel Car Amplifier General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier & Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-A36F 600W Next Generation S-Series Hi-Res Class-D 4-Channel Car Amplifier General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine UTE-73BT Mech-Less Digital Bluetooth Media Receiver with 2 Pair Alpine S2-S80C Type S 8" Component Speakers  Alpine UTE-73BT In-Dash Digital Media Receiver with Bluetooth and Pandora Control Do you store your music on your smartphone? The UTE-73BT supports various file formats, including those streamed from a phone, digital player, Pandora account, or USB drive. General Features: Bluetooth and Pandora In-Dash Digital Media Receiver Peak Power Handling:50watts x 4 channels RMS Power Handling:18watts x 4 channels Pandora Link integrates your car stereo with your iPhone and Pandora Internet Radio Detachable faceplate White LCD text fluorescent display Wireless remote control sold separately Blue button lighting CEA-2006 compliant amplifier iPod USB cable included AM/FM tuner with 12FM/6 AM presets Local/Distance Tuning: Allows the stereo to only tune to strong signals or to allow both strong and distant weak signals 3-Band parametric equalizer with seven selectable tone curves (6 Preset, 1 User) Variable high-pass filter:60Hz,80Hz,120Hz,160Hz, or Off Variable low-pass filter:60Hz,80Hz,120Hz,160Hz, or Off iTunes Tagging lets you tag and download songs you hear on satellite radio Loudness: Will bring out the high and low frequencies to compensate for the ear's decreased sensitivity at lower volumes Audio Mute allows you to lower the volume by 20db instantly Authorized Internet Dealer 2 Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

2 Pair Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set Unparalleled Performance: The S2-S80C is meticulously crafted using a unique combination of polypropylene, Glass Fiber, and Mica Cone materials. This construction ensures lightweight design, high output, and low distortion, resulting in a clean and precise audio experience that exceeds expectations. Enhanced Bass Response: Immerse yourself in powerful and accurate bass notes thanks to the integration of Alpine's exclusive High Amplitude Multi-Roll (HAMR) surround technology. This innovation enables maximum cone movement, delivering deep and impactful low-frequency performance. Versatile Tweeter Design: The S2-S80C includes 1" tweeters with threaded removable housing, allowing for flexible placement and easy customization of the speaker setup. Achieve optimal sound staging and imaging by adjusting the tweeters to suit your listening preferences. Seamless Integration: With an 8" woofer size, in-line crossovers, and OEM fitment, the S2-S80C component speaker set offers seamless integration into your vehicle's audio system. Experience an upgrade in sound quality while maintaining a factory-like appearance. General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-S80C package: S2-S80C owner's manual 2 Woofers 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Warranty information Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine S2-A60M S-Series Class-D Amp, S2-W10D2 10" S-Series Dual 2-Ohm Car Sub bundle This bundle includes: Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase, Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer General Features: 10" subwoofer with dual 2-ohm voice coils carbon fiber/polypropylene cone with HAMR rubber surround frequency response: 23-215 Hz power handling: 600 watts RMS (300 watts per coil) peak power handling: 1,800 watts sensitivity: 86.2 dB sealed box volume: 0.4-0.85 cubic feet ported box volume: 0.75-1.3 cubic feet Twist-lock grille mount system Poly Propylene / Ceramic Dust Cap 2.6" High-Temperature Copper Voice coil 15 mm Xmax 64 oz. Single Stacked Ferrite magnet motor structure Top-mount depth: 4.54" Cutout diameter: 8.94" Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Alpine S2-A60M S-Series Class-D Amp, S2-W10D2 10" S-Series Dual 2-Ohm Car Sub & Grill bundle This bundle includes: Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier Alpine KTE-10G.3 Grille for 10" Type-R and Type-S subwoofers Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase, Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer General Features: 10" subwoofer with dual 2-ohm voice coils carbon fiber/polypropylene cone with HAMR rubber surround frequency response: 23-215 Hz power handling: 600 watts RMS (300 watts per coil) peak power handling: 1,800 watts sensitivity: 86.2 dB sealed box volume: 0.4-0.85 cubic feet ported box volume: 0.75-1.3 cubic feet Twist-lock grille mount system Poly Propylene / Ceramic Dust Cap 2.6" High-Temperature Copper Voice coil 15 mm Xmax 64 oz. Single Stacked Ferrite magnet motor structure Top-mount depth: 4.54" Cutout diameter: 8.94" Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine KTE-10G.3 Grille for 10" Type-R and Type-S subwoofers General Features: 10" Protective Subwoofer Grille Works with Alpine R2-W10D4 and R2-W10D2 10" subwoofers Includes metal mesh grille  Authorized Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.