00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-S10TW 240W Tweeter +SPE6090 600W 6X9" Speaker
$179.90
$320.00
Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set + Alpine SPE-6090600W Peak (150W RMS) 6x9" Type-E Series 2-Way Coaxial Car Speakers
Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set
General Features:
1-Inch Dome Tweeter
Peak Power Handling: 240 Watts
RMS Power Handling: 80 Watts
Impedance: 6 ohms
Sensitivity: 88dB SPL (1W @1m)
Frequency Response: 1k Hz to 22kHz
Mounting Depth: 3/4" (1.8cm)
Cutout Diameter: 2" (5.1cm) circle
Recommended Amplification: up to 80 watts RMS per channel
Authorized Internet Dealer
1-year Manufactures Warranty
What's in the S-S10TW package:
S-S10TW owner's manual
2 Tweeters
2 Flush mount housings
Two 38" Wires with in-line crossovers
2 Flush mount retention rings
2 Stealth brackets
2 Alpine logo badges
Warranty information
Online product registration information
Alpine SPE-6090 600W Peak (150W RMS) 6x9" Type-E Series 2-Way Coaxial Car Speakers
General Features
6" x 9" Type-E Coaxial 2-way Car Speakers
Peak Power Handling: 600 watts per pair / 300 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 65-18,000 Hz
Sensitivity: 91 dB
Top-Mount Depth: 3"
Mounting Diameter: 5-15/16" x 8-3/4"
Authorized Internet Dealer
1-year Warranty
What is in the SPE-6090 package:
SPE-6090 owner’s manual
Two 2-way speakers
2 Grilles
2 Bottom mount brackets
Two 14.75' Lengths of speaker wire
Eight 1-3/8" Screws
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set
$179.90
$359.99
2 Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set
The S-S10TW Tweeter’s compact size and wide frequency range are an efficient and affordable upgrade to any factory or aftermarket sound system. The S-S10TW Tweeter’s motor structure was designed to reduce distortion and increase output at high volumes, so you can turn your music up and still experience crystal clear sound. Brighten up your sound stage without sounding overpowering or compromising sound quality. The silk dome design minimizes harsh highs and produces a warm and mellow tone.
General Features:
1-Inch Dome Tweeter
Peak Power Handling: 240 Watts
RMS Power Handling: 80 Watts
Impedance: 6 ohms
Sensitivity: 88dB SPL (1W @1m)
Frequency Response: 1k Hz to 22kHz
Mounting Depth: 3/4" (1.8cm)
Cutout Diameter: 2" (5.1cm) circle
Recommended Amplification: up to 80 watts RMS per channel
Authorized Internet Dealer
1-year Manufactures Warranty
What's in the S-S10TW package:
S-S10TW owner's manual
2 Tweeters
2 Flush mount housings
Two 38" Wires with in-line crossovers
2 Flush mount retention rings
2 Stealth brackets
2 Alpine logo badges
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set
$89.95
$179.99
Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set
The S-S10TW Tweeter’s compact size and wide frequency range are an efficient and affordable upgrade to any factory or aftermarket sound system. The S-S10TW Tweeter’s motor structure was designed to reduce distortion and increase output at high volumes, so you can turn your music up and still experience crystal clear sound. Brighten up your sound stage without sounding overpowering or compromising sound quality. The silk dome design minimizes harsh highs and produces a warm and mellow tone.
General Features:
1-Inch Dome Tweeter
Peak Power Handling: 240 Watts
RMS Power Handling: 80 Watts
Impedance: 6 ohms
Sensitivity: 88dB SPL (1W @1m)
Frequency Response: 1k Hz to 22kHz
Mounting Depth: 3/4" (1.8cm)
Cutout Diameter: 2" (5.1cm) circle
Recommended Amplification: up to 80 watts RMS per channel
Authorized Internet Dealer
1-year Manufactures Warranty
What's in the S-S10TW package:
S-S10TW owner's manual
2 Tweeters
2 Flush mount housings
Two 38" Wires with in-line crossovers
2 Flush mount retention rings
2 Stealth brackets
2 Alpine logo badges
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Pair Alpine SPE-6000 Car Speaker
480W Max, 120W RMS 6.5" 2-Way Type-E Coaxial Speakers w/ Silk Tweeters $119.99 $259.99
480W Max, 120W RMS 6.5" 2-Way Type-E Coaxial Speakers w/ Silk Tweeters $119.99 $259.99
2 Pair Alpine SPE-6000 120W 6.5" 2-Way Type-E Coaxial Car Speakers w/ Silk Tweeters
Hearing is BelievingStep up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers, for a performance-packed sound quality you expect from Alpine.Quality over QuantityJust because you want better sound in your car, doesn’t mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you simply need replacement speakers or even want to start building a sound system.Soft Dome Tweeter TechnologyTo output quality sound, the Type-E speakers are developed off of soft dome tweeters, rather than traditional cone-type tweeters which can be harsh. This results in a more enjoyable listening experience in the car when playing back your music or other entertainment over your sound system.Let Me See Your GrillOutfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function. The dark, solid protective grill is an attractive upgrade to standard factory speakers.General Features:
6-1/2" Type-E Coaxial 2-way Car Speakers
Power Handling:
Peak: 480 watts per pair / 240 watts each
RMS: 120 watts per pair / 60 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 68-20,000 Hz
Sensitivity: 88.5 dB
Top-Mount Depth: 2-3/8"
Mounting Diameter: 5-1/2"
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SPE-6000 box:
Two 2-way speakers
2 Grilles
Eight 1-3/8" Screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
SPE-6000 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov