Alpine 5.25" Car Speakers (35)

2 Alpine SPE-5000 5.25" 400 Watt Car Audio Speakers+ BBX-T600 2 Channel Amplifier + Amp Kit Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at an amazing price. And they are designed to fit easily in virtually any system. This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs What's in the BBX-T600 package: BBX-T600 owner's manual Two Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information ⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warning

Alpine Type-S SPS-510 5-1/4" 2-Way Type-S Series Coaxial Car Speakers General Features: 5-1/4" Type S Series Car Speakers Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Poly-mica cone woofer Rubber surround 3/4" Silk dome tweeter Optimized air-flow design Stamped steel basket frame Affordable premium quality upgrade to your factory audio system Great power-efficient speakers 4 ohms impedance Square-wire short voice coil Low distortion strontium magnet Top-mount depth: 2" Cutout diameter: 4-1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Alpine SPS-510 owner's manual Two 2-Way 5-1/4" speakers Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other) Eight 3/4" Self-tapping screws 8 Flat washers 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Pair ALPINE S-S50 170 Watt 5.25" 5 1/4" Coaxial 2-Way Speaker Bundle With METRA 72-5512 Wire Harness & METRA 82-5600 5.25" To 6 x 8" Speaker Brackets Compatible With 97-98 Ford F-150 (3 items) Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5 1/4inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S-S50 owner's manual Metra 72-5512 Speaker AdapterGeneral Features: Speaker Connector Harness Adapter OEM Style Designed For Select 1989-Up Ford Lincoln Mazda Mercury Vehicles Connects Aftermarket Speakers To The Factory Speaker Harness Quick And Easy Installation Plugs Directly Into Harness High Quality, ABS Plastic Molded Connector For The Perfect Fit No Cutting Of Factory Wiring Needed Compatible with the following vehicles:Ford: Bronco (Full Size) 1987-1996 Crown Victoria 1992-1997 E-Series Econoline Full Size Van 2009-2012 Econoline Full Size Van 1992-2008 ZX2 1997-2004 Escort 1991-2004 Expedition 1997-1998 Explorer 1991-2001 F-150 Classic 2004 F-250/350/450/550/650/750 1997-1998 F-Series Pickup 1987-1996 LTD 1989-1991 Mustang 1994-2004 Probe 1988-1997 Ranger 1989-1997 Taurus 1990-1999 Tempo 1989-1994 Thunderbird 1989-1997 Windstar 1995-2003 Lincoln: Continental 1990-1994 Mark VII 1989-1992 Mark VIII 1993-1995 Navigator 1997-1998 Town Car 1990-2002 Mazda: 626 1993-2002 B2300/B3000/B4000 1995-1997 MX6 1993-1997 Navajo 1991-1994 Mercury: Cougar 1989-1997 Grand Marquis 1989-1997 Mountaineer 1997-2001 Sable 1990-1999 Topaz 1989-1994 Tracer 1991-1996 ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE S-S50 170 Watt 5.25" 5 1/4" Coaxial 2-Way Car Audio Speakers. Metra 72-1002 Speaker Harness Connector for 1984-02 Jeep+ Dodge+ Cherokee Vehicles. Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5 1/4inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S-S50 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5 1/4-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S-S50 owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine SPE-5000 120W 5.25” 2-Way Type-E Coaxial Car Speakers w/ Silk Tweeters Hearing is Believing Step up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers, for a performance-packed sound quality you expect from Alpine. Quality over Quantity Just because you want better sound in your car, does not mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you simply need replacement speakers or even want to start building a sound system. Soft Dome Tweeter Technology To output quality sound, the Type-E speakers are developed off soft dome tweeters, rather than traditional cone-type tweeters which can be harsh. This results in a more enjoyable listening experience in the car when playing back your music or other entertainment over your sound system. Let Me See Your Grill Outfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function. The dark, solid protective grill is an attractive upgrade to standard factory speakers. General Features: 5-1/4" 2-way speakers pearl mica-injected polypropylene woofer cone with specialized rubber surround 3/4" silk dome tweeter handles up to 100 watts RMS (200 watts peak power) frequency response: 82-20,000 Hz sensitivity: 87.5 dB impedance: 4 ohms top-mount depth: 1-11/16" grilles included warranty: 1 year Two 2-way speakers 2 Grilles Eight 1" Screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box What is in the SPE-5000 box: Two 2-way speakers 2 Grilles Eight 1" Screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box SPE-5000 owner's manual ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SPE-5000 + Absolute TW-600 + Absolute USA BT1700 + Universal 360 Degree Rotation and Swivel Mobile Bracket Holder Bundle Alpine SPE-5000 Type-E Series 5-1/4" 2-way car speakers Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover (Pair) Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black) Universal 360 Degree Rotation and Swivel Mobile Bracket Holder Alpine SPE-5000 120W 5.25” 2-Way Type-E Coaxial Car Speakers w/ Silk Tweeters Hearing is Believing Step up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers, for a performance packed sound quality you expect from Alpine. Quality over Quantity Just because you want better sound in your car, does not mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you simply need replacement speakers or even want to start building a sound system. Soft Dome Tweeter Technology To output quality sound, the Type-E speakers are developed off soft dome tweeters, rather than traditional cone-type tweeters which can be harsh. This results in a more enjoyable listening experience in the car when playing back your music or other entertainment over your sound system. Let Me See Your Grill Outfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function. The dark, solid protective grill is an attractive upgrade to standard factory speakers. General Features: 5-1/4" 2-way speakers pearl mica-injected polypropylene woofer cone with specialized rubber surround 3/4" silk dome tweeter handles up to 100 watts RMS (200 watts peak power) frequency response: 82-20,000 Hz sensitivity: 87.5 dB impedance: 4 ohms top-mount depth: 1-11/16" grilles included warranty: 1 year Two 2-way speakers 2 Grilles Eight 1" Screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box What's in the SPE-5000 package: Two 2-way speakers 2 Grilles Eight 1" Screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box SPE-5000 owner's manual ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE S-S50 170 Watt 5.25" 5 1/4" Coaxial 2-Way Car Audio Speakers. Metra 72-1002 Speaker Harness Connector for 1984-02 Jeep+ Dodge+ Cherokee Vehicles. Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5 1/4inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S-S50 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Alpine S-S50 Car Audio Type S Series 5 1/4" 220 Watt Speakers with 20' Speaker Wire Package Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5 1/4inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S-S50 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Alpine S-S50 Car Audio Type S Series 5 1/4" 220 Watt Speakers with 20' Speaker Wire Package Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5 1/4inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S-S50 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Alpine S-S50 5.25" S-Series S-S50 2-Way Coaxial Speakers Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5 1/4inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S-S50 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov