

Alpine
Alpine S-A60M 600W S-Series Monoblock Class-D Amplifier
$219.95
$280.00
Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features:
Alpine S-Series Mono Power Amplifier - S-A60M
RMS Power Output:
400W x 1 @ 4 Ohms (14.4V < 1% THD+N)
600W x 1 @ 2 Ohms (14.4V < 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms)
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
CTA-2006 compliant
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10HZ-400Hz (+/- 3 dB)
Damping Factor: > 1000
variable low-pass filter (50-400 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
Speaker-level inputs (Speaker Wire to RCA Adapter Required)
Preamp Inputs
Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback
Remote Sensing automatic turn-on when using speaker-level inputs
Approximate Weight: 11 lbs
Fuse Rating: fuse rating: 30A x 2
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-A60M package:
S-A60M owner's manual
Mono subwoofer amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual
Alpine Verification Certificate
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


Alpine
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
$199.95
$349.95
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D), occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. While designed to “stack” behind the iLX-W650, or similar 2-DIN radio, both amplifiers can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping.
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
What is in the KTA-200M package:
KTA-200M Owner's Manual
Mono amplifier
12" Input/Output/Power harness
1 Head unit (iLX-W650) mounting bracket
2 Universal mounting brackets
Four M5x6mm Allen head machine screws (3mm)
Two M2.6x8mm Machine screws
Four 3/8" Screws
Warranty information
Online product registration information
FCC Compliance Statement
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


Alpine
Alpine KTA-30MW Car Amplifier Mono 600W Weather Resistant Tough Power Pack Amp
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack will surely deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for adding subwoofer power but doesn’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass Filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to adapt to musical needs automatically
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-30MW package:
KTA-30MW owner's manual
Mono amplifier
14" Power/signal harness
4 Self-tapping screws
Connection sheet
Limited Warranty sheet
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


ALPINE
Alpine S-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4ANL 4 Gauge Complete Amplifier Kit
$249.99
$339.99
Alpine S-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4ANL 4 Gauge Complete Amplifier Kit
Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features:
Alpine S-Series Mono Power Amplifier - S-A60M
RMS Power Output:
400W x 1 @ 4 Ohms (14.4V < 1% THD+N)
600W x 1 @ 2 Ohms (14.4V < 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms)
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
CTA-2006 compliant
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10HZ-400Hz (+/- 3 dB)
Damping Factor: > 1000
variable low-pass filter (50-400 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
Speaker-level inputs (Speaker Wire to RCA Adapter Required)
Preamp Inputs
Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback
Remote Sensing automatic turn-on when using speaker-level inputs
Approximate Weight: 11 lbs
Fuse Rating: fuse rating: 30A x 2
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-A60M package:
S-A60M owner's manual
Mono subwoofer amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual
Alpine Verification Certificate
Online product registration information
Absolute KIT4ANL Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts ANL Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme
Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. You might not know that some companies are playing some gimmicks, and you could get ripped off!
Today, I would recommend KIT4ANL for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great and is much better than the typical 18 AWG wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
16 ft. of 4 AWG high current power cable
Three ft. of 4 AWG ground cable
17 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
Six ft. of split loom tubing
1 Gold-plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 ANL 4 AWG water-resistant inline fuse holder
1 PCS 100 AMP ANL Fuse
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


Power Acoustik
Power Acoustik BAMF18000D BAMF Series 1 Channel D Class 8000 Watts Amplifier
$189.99
$350.00
Power Acoustik BAMF1-8000D 8,000W Max (4000W RMS) BAMF Series Class D 1-Ohm Stable Strappable Monoblock Amplifier
Make yourself heard with BAMF amplifiers from Power Acoustik. This BAMF Series Class D Monoblock Amp (8,000 Watts max) will tear up your ride and bring out your inner beast. With DIY easy-install terminals and controls and a dash-mount remote, this is a user-friendly monoblock you'll love.
General Features:
Power Acoustik BAMF Series BAMF1-8000D
Class-D 1-Ohm Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 1800 watts x 1 chan.
RMS Power Rating: 2 ohms: 2700 watts x 1 chan.
RMS Power Rating: 1 ohm: 4000 watts x 1 chan.
Total power output: 8000 watts
Pulse Width Modulated MOSFET power supply with Audiophile Grade IRTM Transistors
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Angled Wire Terminals for Secure Wire Connections
Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation
Variable low-pass filter: 40 - 200 Hz, 24 dB/octave
Subsonic filter: 20 - 50 Hz , 24 dB/octave
Variable Bass Boost: 0 to +12 dB bass boost
Phase Switch: 0° to 180°
Fusing: 40A x 5
Total fuse rating: 200A
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


Alpine
Alpine X-A90M X-Series Mono Power Density Amplifier Bundled w/Alpine RUX-KNOB Remote Bass Level Control Knob
$749.95
$1,049.99
Alpine X-A90M X-Series Mono Power Density Amplifier Bundled w/Alpine RUX-KNOB Remote Bass Level Control KnobAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configurations, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:
Alpine X-Series X-A90M
Class-D Full Range 2 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohms: 600 watts x 1 chan.
2 ohms: 900 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
Mono channel operation
Speaker-level (high-level) inputs
Preamp Outputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .4 - 10V
Low level: .1 - 4V
Frequency Response: 8 - 400
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >107dB
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Variable subsonic filter: 8 - 40Hz, -24dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What is in the Package:
Mono amplifier
Two 35A ATO fuses
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
2 Speaker connector plugs
Logo Plate
4 Self-tapping screws
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90M owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


Alpine
Alpine R-A75M Absolute KIT0 R-Series Class D Monoblock Subwoofer Amplifier 750 Watts RMS with Absolute Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0
$499.95
$799.99
Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier 750 Watts RMS with Absolute Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga
Alpine R-A75M R-Series Mono Digital Amplifier - 750 Watts x 1 at 2-Ohms
HI-RESOLUTION AUDIO COMPLIANT
The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant.
THE LOUDEST FAMILY ON THE BLOCK
The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.
General Features:
R-Series Class D Monoblock Subwoofer Amplifier
Power Output:
500 watts RMS x 1 @ 4 ohms
750 watts RMS x 1 @ 2 ohms
CTA-2006 compliant
Variable low-pass filter (50-400 Hz, 24 dB/octave)
Variable bass boost (0-12 dB at 50 Hz)
Variable subsonic filter (min-40 Hz, 24 dB/octave)
We recommend the Alpine RUX-KNOB.2 if you are looking for a remote bass knob for Alpine Amplifiers
Preamp and speaker-level inputs
Speaker wire to RCA adapter required for speaker-level input - we recommend the Rockford Fosgate RFI2SW
preamp outputs
wiring and hardware not included with amplifier
4-gauge power and ground leads recommended - get the NVX XAPK4 for this
Fuse rating: 40A x 2
Dimensions: 9" W x 2-1/16" H x 7-1/8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
Mono subwoofer amplifier
Two 40-amp ATO fuses (installed)
4 Mounting feet
Four 3/4" Screws
Eight M2.5x5.5mm Machine screws
2mm Allen wrench
3mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine R-A75M owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


Alpine
Alpine KTA-30MW Car Amplifier Mono 600W Max, 300W RMS Weather Resistant Tough Power Pack Amp
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-30MW box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine
Alpine R-A75M Car Amplifier
R-Series Class D Monoblock Subwoofer Amplifier 750 Watts RMS $499.95 $599.99
R-Series Class D Monoblock Subwoofer Amplifier 750 Watts RMS $499.95 $599.99
Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier 750 Watts RMS
HI-RESOLUTION AUDIO COMPLIANT
The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant.
THE LOUDEST FAMILY ON THE BLOCK
The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.
General Features:
R-Series Class D Monoblock Subwoofer Amplifier
Power Output:
500 watts RMS x 1 @ 4 ohms
750 watts RMS x 1 @ 2 ohms
CTA-2006 compliant
Variable low-pass filter (50-400 Hz, 24 dB/octave)
Variable bass boost (0-12 dB at 50 Hz)
Variable subsonic filter (min-40 Hz, 24 dB/octave)
We recommend the Alpine RUX-KNOB.2 if you are looking for a remote bass knob for Alpine Amplifiers
Preamp and speaker-level inputs
Speaker wire to RCA adapter required for speaker-level input - we recommend the Rockford Fosgate RFI2SW
preamp outputs
wiring and hardware not included with amplifier
4-gauge power and ground leads recommended - get the NVX XAPK4 for this
Fuse rating: 40A x 2
Dimensions: 9" W x 2-1/16" H x 7-1/8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R-A75M package:
Mono subwoofer amplifier
Two 40-amp ATO fuses
4 Mounting feet
Four 3/4" Screws
Eight M2.5x5.5mm Machine screws
2mm Allen wrench
3mm Allen wrench
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine R-A75M owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


Alpine
Alpine X-A90M Car Amplifier 900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier
$749.95
$999.99
Alpine X-A90M 900 W RMS X-Series Class-D Monoblock 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configurations, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:
Alpine X-Series X-A90M
Class-D Full Range 2 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohms: 600 watts x 1 chan.
2 ohms: 900 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
Mono channel operation
Speaker-level (high-level) inputs
Preamp Outputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .4 - 10V
Low level: .1 - 4V
Frequency Response: 8 - 400
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >107dB
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Variable subsonic filter: 8 - 40Hz, -24dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What is in the Package:
Mono amplifier
Two 35A ATO fuses
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
2 Speaker connector plugs
Logo Plate
4 Self-tapping screws
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90M owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine
Alpine KTA-30MW Mono Amp 300-Watt RMS Weather Resistant Tough Power PackAmplifier
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
Alpine KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine
Alpine KTA-30MW Mono Power Pack Amp 200 RMS x 1 at 4-Ohms /300 RMS x 1 at 2-Ohms
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
Alpine KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
Alpine KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-30MW box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


Alpine
Alpine X-A90M 900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier
$749.95
$999.99
Alpine X-A90M 900 W RMS X-Series Class-D Monoblock 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configurations, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:
Alpine X-Series X-A90M
Class-D Full Range 2 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohms: 600 watts x 1 chan.
2 ohms: 900 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
Mono channel operation
Speaker-level (high-level) inputs
Preamp Outputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .4 - 10V
Low level: .1 - 4V
Frequency Response: 8 - 400
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >107dB
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Variable subsonic filter: 8 - 40Hz, -24dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What is in the Package:
Mono amplifier
Two 35A ATO fuses
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
2 Speaker connector plugs
Logo Plate
4 Self-tapping screws
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90M owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov