Alpine Jeep Wrangler (33)

Alpine Electronics i509-WRA-JL 9” Weather-Resistant Multimedia Receiver for The 2018 – Up Jeep Wrangler and 2020 – Up Jeep Gladiator With Alpine DVR-C320R  DESIGNED FOR JEEP® The i509-WRA-JL is compatible with the following vehicles: 2011 - 2018 Jeep Wrangler JL 2011 - 2018 Jeep Gladiator The display is housed in a Jeep® -specific trim bezel that emulates the look and feel of the Jeep® dash. A Jeep® -specific harness is included with the receiver to take out the guesswork during installation and make it a true plug-and-play solution. The weather-resistant display features a Jeep® -specific opening screen and LED color scheme for a consistent design with factory Jeep® settings.HIGH-RESOLUTION AUDIOExperience incredible music detail with Hi-Res Audio Playback. High-precision music reproduction brings out the full potential of every song and makes every drive feel like an intimate recording studio session with your favorite artist. Access your favorite songs on popular Hi-Res streaming services like Apple Music, Tidal, Amazon Music HD, and more.The Alpine i509-WRA-JL car multimedia player plays Hi-Res music at its intended spec of 96kHz/24Bit via a wired USB connection to a smartphone or wirelessly through a Bluetooth connection. You can also purchase and download Hi-Res music files onto a USB drive from platforms like HDtracks for Hi-Res playback on the i509-WRA-JL. General Features: 9” WXGA High-Resolution Anti-Glare Display (1280x720px) Jeep-specific trim bezel for plug-and-play installation Weather-Resistant (rated IP53 for dust and ingress) Hi-Res Audio Playback   Works with Apple CarPlay (wireless and wired) The Google Assistant is available on Android Auto (wireless and wired)   Bluetooth built-in for hands-free calling and audio streaming   RMS Power Output: 16 watts x 4 channel Peak Power Output: 50 watts x 4 channel Bluetooth hands-free calling and audio streaming Includes Alpine Restyle package with all installation parts Retains factory rear-view camera and displays engine performance data on touchscreen Built-in HD Radio Tuner Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the i509-WRA-JL package: Alpine Restyle i509-WRA-JL owner's manual Alpine iLX-F509 Maestro ALP-HRN-WJL3 Alpine G-KTX-WJL Installation Manual Warranty Information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine Electronics i509-WRA-JL 9” Weather-Resistant Multimedia Receiver for The 2018 – Up Jeep Wrangler and 2020 – Up Jeep Gladiator DESIGNED FOR JEEP® The i509-WRA-JL is compatible with the following vehicles: 2011 - 2018 Jeep Wrangler JL 2011 - 2018 Jeep Gladiator The display is housed in a Jeep-specific trim bezel that emulates the look and feel of the Jeep dash. A Jeep® -specific harness is included with the receiver to take out the guesswork during installation and make it a proper plug-and-play solution. The weather-resistant display features a Jeep-specific opening screen and LED color scheme for a consistent design with factory Jeep settings.HIGH-RESOLUTION AUDIOExperience incredible music detail with Hi-Res Audio Playback. High-precision music reproduction brings out the full potential of every song and makes every drive feel like an intimate recording studio session with your favorite artist. Access your favorite songs on popular Hi-Res streaming services like Apple Music, Tidal, Amazon Music HD, and more.The Alpine i509-WRA-JL plays Hi-Res music at its intended spec of 96kHz/24Bit via a wired USB connection to a smartphone or wirelessly through a Bluetooth connection. You can also purchase and download Hi-Res music files onto a USB drive from platforms like HDtracks for Hi-Res playback on the i509-WRA-JL. General Features: 9” WXGA High-Resolution Anti-Glare Display (1280x720px) Jeep-specific trim bezel for plug-and-play installation Weather-Resistant (rated IP53 for dust and ingress) Hi-Res Audio Playback   Works with Apple CarPlay (wireless and wired) The Google Assistant is available on Android Auto (wireless and wired)   Bluetooth built-in for hands-free calling and audio streaming   RMS Power Output: 16 watts x 4 channels Peak Power Output: 50 watts x 4 channels Bluetooth hands-free calling and audio streaming Includes Alpine Restyle package with all installation parts Retains factory rear-view camera and displays engine performance data on touchscreen Built-in HD Radio Tuner Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the i509-WRA-JL package: Alpine Restyle i509-WRA-JL owner's manual Alpine iLX-F509 Maestro ALP-HRN-WJL3 Alpine G-KTX-WJL Installation Manual Warranty Information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine Electronics i509-WRA-JL 9” Weather-Resistant Multimedia Receiver for the 2018 – Up Jeep Wrangler and 2020 – Up Jeep Gladiator DESIGNED FOR JEEP® The i509-WRA-JL is compatible with the following vehicles: 2011 - 2018 Jeep Wrangler JL 2011 - 2018 Jeep Gladiator The display is housed in a Jeep-specific trim bezel that emulates the look and feel of the Jeep dash. A Jeep® -specific harness is included with the receiver to take out the guesswork during installation and make it a proper plug-and-play solution. The weather-resistant display features a Jeep-specific opening screen and LED color scheme for a consistent design with factory Jeep settings.HIGH-RESOLUTION AUDIOExperience incredible music detail with Hi-Res Audio Playback. High-precision music reproduction brings out the full potential of every song and makes every drive feel like an intimate recording studio session with your favorite artist. Access your favorite songs on popular Hi-Res streaming services like Apple Music, Tidal, Amazon Music HD, and more.The Alpine i509-WRA-JL plays Hi-Res music at its intended spec of 96kHz/24Bit via a wired USB connection to a smartphone or wirelessly through a Bluetooth connection. You can also purchase and download Hi-Res music files onto a USB drive from platforms like HDtracks for Hi-Res playback on the i509-WRA-JL. General Features: 9” WXGA High-Resolution Anti-Glare Display (1280x720px) Jeep-specific trim bezel for plug-and-play installation Weather-Resistant (rated IP53 for dust and ingress) Hi-Res Audio Playback   Works with Apple CarPlay (wireless and wired) The Google Assistant is available on Android Auto (wireless and wired)   Bluetooth built-in for hands-free calling and audio streaming   RMS Power Output: 16 watts x 4 channels Peak Power Output: 50 watts x 4 channels Bluetooth hands-free calling and audio streaming Includes Alpine Restyle package with all installation parts Retains factory rear-view camera and displays engine performance data on touchscreen Built-in HD Radio Tuner Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the i509-WRA-JL package: Alpine Restyle i509-WRA-JL owner's manual Alpine iLX-F509 Maestro ALP-HRN-WJL3 Alpine G-KTX-WJL Installation Manual Warranty Information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-24WRA Complete Audio System for 18-Up Jeep Wrangler & 20-Up Gladiator Compatible Vehicles: 2018 – UP JEEP® WRANGLER, 4DR / NON-AMPLIFIED 2020 – UP JEEP® GLADIATOR, NON-AMPLIFIED TOP-OFF SOUNDYour Jeep® begs for top-off drives, whether cruising down the highway or weaving through trails, so you need a sound system that delivers music for all your adventures. The PSS-24WRA is a 300-watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018—Up Jeep® Wrangler and non-amplified 2020—Up Jeep® Gladiator.COMPLETE PACKAGEGo beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has 5-channels of powered sounds that replace your factory system. The package includes two sets of 6.5” weather-resistant mid-bass drivers and 1” weather-resistant tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer, and a 4-channel power pack amplifier.TUNED FOR JEEP®The PSS-24WRA sound system is tuned for the unique cabin environment of the 2018-Up Jeep Wrangler and 2020–Up Jeep Gladiator. The weather-resistant speakers are designed for powerful, top-off performance unhindered by weather, wind, or other noise while driving. The 6.5” mid-bass drivers bring out the full potential of your sound, while the tweeters capture the high frequencies often lost in music reproduction. The 8” compact subwoofer adds deep, accurate bass that grounds your sound system.PLUG-AND-PLAY INSTALLATIONVehicle-specific speaker connectors and pods designed for the 2018-up Jeep Wrangler and 2020–up Jeep Gladiator are included for plug-and-play installation. Tweeter adapter plates use the original factory tweeter locations to remove the guesswork from installation. Vehicle-specific mounting brackets are included to secure the 8” compact subwoofer and 4-channel amplifier under the passenger seat without drilling.SYSTEM COMPATIBILITYThe PSS-24WRA is compatible with the i407-WRA-JL 7-Inch Multimedia Receiver and X409-WRA-JL 9-Inch Weather-Resistant Navigation System with Off-Road Mode. The PSS-24WRA also includes a vehicle-specific T-harness for installation with the factory radio into compatible four-door, non-amplified NEW 2018 – 2020 Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator. General Features: Complete, five-channel powered sound system upgrade package Compatible with four-door, non-amplified 2018 - Up Jeep Wrangler and non-amplified 2020 - Up Jeep Gladiator Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep Wrangler Includes Alpine's SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U 180W, 4-channel Power Pack amplifier 120W, 8" powered subwoofer (2x) 6.5" weather-resistant mid-bass drivers (2x) 1" weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers Vehicle-specific front speaker pods with vehicle-specific connectors Tweeter adapter plates allow for the use of the original factory tweeter locations SPV-65-JLT weather-resistant rear soundbar speaker system Rugged, premium grills designed to emulate the factory look and appeal Vehicle-specific connectors for plug-and-play speaker installation  Utilizes factory bolt locations Durable stamped, steel frame speaker basket design Includes a template for mounting Vehicle-specific T-harness for installation with OEM radio into compatible 2018 2018-Up Jeep Wrangler and 2020-Up Jeep Gladiator vehicles Vehicle-specific mounting brackets allow the powered sub and amp to be secured Front (SPV-65X-WRA): Power handling: 75 watts RMS (225 watts peak) Frequency response: 65kHz – 22kHz Nominal impedance: 4 ohms Weather-resistant: IP55 Rear (SPV-65-JLT): Power handling: 90 watts RMS (270 watts peak) Frequency response: 50kHz – 22kHz Nominal impedance: 4 ohms Weather-resistant: IP55 Powered Subwoofer (PWE-S8): 120 watts RMS (240 watts peak) Frequency response: 32 - 150Hz Variable low-pass crossover (80-200 Hz) Variable phase control (0-180 degrees) preamp- and speaker-level inputs Four-Channel Power Pack Amplifier (KTP-445U): 45 watts RMS x 4 at 4 or 2 ohms 90 watts RMS x 2 bridged at 4 ohms Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave) Switchable RCA or speaker-level inputs Dimensions: 27” L x 18.5” W x 19.5” H Weight: 40lbs Authorized Dealer 1-year Manufacturer's Warranty Note: Not compatible with the factory-equipped subwoofer system What's in the PSS-24WRA package: PSS-24WRA owner's manual This Alpine kit contains five individually packaged items: PWE-S8 Subwoofer KTP-445U Amplifier SPV-65X-WRA 6.5" Component Speakers SPV-65-JLT 6.5" 2-Way Speakers ALP-POD-JLTR Speaker Pods PSU-BKT-JL-R PWE Right Bracket JL PSU-BKT-JL-L PWE Left Bracket JL ALP-HRN-PSU300 PSU Power Harness ALP-THRN-CH2 Chrysler T-Harness CT6 6" Cable Ties PHPSM412 Pan Head Phillips Screw M4x12 SLWM4 M4 Split Lock Washers PHSCR832 8-32 Pan Head Phillips screws PSS-WRA-IM Installation Manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-24WRA Complete Audio System for 18-Up Jeep Wrangler & 20-Up Gladiator Compatible Vehicles: 2018 – UP JEEP WRANGLER, 4DR / NON-AMPLIFIED 2020 – UP JEEP GLADIATOR, NON-AMPLIFIED TOP-OFF SOUNDYour Jeep begs for top-off drives, whether cruising down the highway or weaving through trails, so you need a sound system that delivers music for all your adventures. The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018–Up Jeep Wrangler and non-amplified 2020–Up Jeep Gladiator.COMPLETE PACKAGEGo beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has five channels of powered sounds that replace your factory system. The package includes two sets of 6.5” weather-resistant mid-bass drivers and 1” weather-resistant tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer, and a 4-channel power pack amplifier.TUNED FOR JEEP®The PSS-24WRA sound system is tuned for the unique cabin environment of the 2018-up Jeep Wrangler and 2020–up Jeep Gladiator. The weather-resistant speakers are designed for powerful, top-off performance unhindered by weather, wind, or other noise while driving. The 6.5” mid-bass drivers bring out the full potential of your sound, while the tweeters capture the high frequencies often lost in music reproduction. The 8” compact subwoofer adds deep, accurate bass that grounds your sound system.PLUG-AND-PLAY INSTALLATIONVehicle-specific speaker connectors and pods designed for the 2018-up Jeep Wrangler and 2020–up Jeep Gladiator are included for plug-and-play installation. Tweeter adapter plates use the original factory tweeter locations to remove the guesswork from installation. Vehicle-specific mounting brackets are included to secure the 8” compact subwoofer and 4-channel amplifier under the passenger seat without drilling.SYSTEM COMPATIBILITYThe PSS-24WRA is compatible with the i407-WRA-JL 7-Inch Multimedia Receiver and X409-WRA-JL 9-Inch Weather-Resistant Navigation System with Off-Road Mode. The PSS-24WRA also includes a vehicle-specific T-harness for installation with the factory radio into compatible four-door, non-amplified NEW 2018 – 2020 Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator. General Features: Complete, five-channel powered sound system upgrade package Compatible with four-door, non-amplified 2018 - Up Jeep Wrangler and non-amplified 2020 - Up Jeep Gladiator Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep Wrangler Includes Alpine's SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U 180W, 4-channel Power Pack amplifier 120W, 8" powered subwoofer (2x) 6.5" weather-resistant mid-bass drivers (2x) 1" weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers Vehicle-specific front speaker pods with vehicle-specific connectors Tweeter adapter plates allow for the use of the original factory tweeter locations SPV-65-JLT weather-resistant rear soundbar speaker system Rugged, premium grills designed to emulate the factory look and appeal Vehicle-specific connectors for plug-and-play speaker installation  Utilizes factory bolt locations Durable stamped steel frame speaker basket design Includes a template for mounting Vehicle-specific T-harness for installation with OEM radio into compatible 2018 2018-Up Jeep Wrangler and 2020-Up Jeep Gladiator vehicles Vehicle-specific mounting brackets allow the powered sub and amp to be secured Front (SPV-65X-WRA): Power handling: 75 watts RMS (225 watts peak) Frequency response: 65kHz – 22kHz Nominal impedance: 4 ohms Weather-resistant: IP55 Rear (SPV-65-JLT): Power handling: 90 watts RMS (270 watts peak) Frequency response: 50kHz – 22kHz Nominal impedance: 4 ohms Weather-resistant: IP55 Powered Subwoofer (PWE-S8): 120 watts RMS (240 watts peak) Frequency response: 32 - 150Hz Variable low-pass crossover (80-200 Hz) Variable phase control (0-180 degrees) preamp- and speaker-level inputs Four Channel Power Pack Amplifier (KTP-445U): 45 watts RMS x 4 at 4 or 2 ohms 90 watts RMS x 2 bridged at 4 ohms Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave) Switchable RCA or speaker-level inputs Dimensions: 27” L x 18.5” W x 19.5” H Weight: 40lbs Authorized Dealer 1-year Manufacturer's Warranty Note: Not compatible with the factory-equipped subwoofer system What's in the PSS-24WRA package: PSS-24WRA owner's manual This Alpine kit contains five individually packaged items: PWE-S8 Subwoofer KTP-445U Amplifier SPV-65X-WRA 6.5" Component Speakers SPV-65-JLT 6.5" 2-Way Speakers ALP-POD-JLTR Speaker Pods PSU-BKT-JL-R PWE Right Bracket JL PSU-BKT-JL-L PWE Left Bracket JL ALP-HRN-PSU300 PSU Power Harness ALP-THRN-CH2 Chrysler T-Harness CT6 6" Cable Ties PHPSM412 Pan Head Phillips Screw M4x12 SLWM4 M4 Split Lock Washers PHSCR832 8-32 Pan Head Phillips screws PSS-WRA-IM Installation Manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine Bundle - Alpine ILX-W670 Multimedia Receiver with Dash Kit, Wiring Harness, and Absolute B/U Rearview Camera, Compatible with Wrangler, 97-02 This bundle includes an Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility, a Metra 95-6549 Dash Kit Compatible with 1997-2002 Jeep Wrangler, a Metra 70-1817 Wiring Harness Compatible with 1984-2005 Chrysler-Plymouth-Dodge-Jeep, an Absolute CAM670 License Plate Mount Rearview Camera, a pry kit, and a Creative Audio cozy.Alpine iLX-W670 Digital multimedia receiverGeneral Features: digital media receiver with AM/FM tuner (does not play CDs) shallow-mount chassis design (2-7/16" deep) designed to pair with Alpine's KTA-450 power pack amplifier car multimedia player with touchscreen swipe controls designed to work with CarPlay & Android Auto hands-free control lets you access apps using your voice built-in Bluetooth connectivity enjoy music apps like Pandora and Spotify built-in amplifier (18 watts RMS CEA-2006/50 peak x 4 channels) USB port accommodates various devices and thumb drives FLAC Compatible Digital multimedia receiver with 7" capacitive touchscreen Smartphone Features: designed to work with CarPlay and Android Auto built-in iPod, iPhone, and iPad control Android control through USB Pandora and Spotify control with iPhone and Android Siri Eyes Free Control; works with Google Assistant Metra 95-6549 Dash Kit Compatible with 1997-2002 Jeep WranglerGeneral Features: ISO DDIN radio provision Complete the center dash panel for a factory look Metra 70-1817 Wiring Harness Compatible with 1984-2005 Chrysler-Plymouth-Dodge-JeepGeneral Features: Plugs into car harness at radio Provides Power 4 Speaker connection Warning: This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Including factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice Sheet Installation instructions Specifications on the box Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System Compatible Fit Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Including factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice Sheet Installation instructions Specifications on the box Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Alpine SBV-10-WRA Preloaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU. You don't have extra space to spare when you have a Wrangler. Alpine engineered the SBV-10-WRA to conveniently fit under the front passenger's seat making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet) Enjoy impactful bass with your Wrangler's top on or off. The SBV-10-WRA loads the lower frequency sound into the passenger's footwell to deliver quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends. General Features: 10" High-Performance Transducer Sealed Subwoofer Enclosure Power Handling: Peak: 1000W Total RMS: 300W Total Final Impedance: 2 ohms Preloaded with single 10" Series Subwoofers Sealed Enclosure with (finish type) Enclosure Dimensions: 16-1/4" L x 15-3/4" W x 8-3/8" H Subwoofer Features: Water Resistance: IP66 Rating Frequency Response: 35-200Hz Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Alpine Bundle - Alpine ILX-W670 Multimedia Receiver with Dash Kit, Wiring Harness, and Absolute B/U Camera, Compatible with Wrangler, 97-02 This bundle includes an Alpine iLX-W670 car stereo Digital Multimedia Receiver with CarPlay and Android Auto Compatibility, a Metra 95-6549 Dash Kit Compatible with 1997-2002 Alpine car stereo Jeep Wrangler, a Metra 70-1817 Wiring Harness Compatible with 1984-2005 Chrysler-Plymouth-Dodge-Jeep, an Absolute CAM670 License Plate Mount Rearview Camera, a pry kit, and a Creative Audio cozy.Alpine iLX-W670 Digital multimedia receiverGeneral Features: digital media receiver with AM/FM tuner (does not play CDs) shallow-mount chassis design (2-7/16" deep) designed to pair with Alpine's KTA-450 power pack amplifier touchscreen swipe controls designed to work with CarPlay and Android Auto hands-free control lets you access apps using your voice built-in Bluetooth connectivity enjoy music apps like Pandora and Spotify built-in amplifier (18 watts RMS CEA-2006/50 peak x 4 channels) USB port accommodates various devices and thumb drives FLAC Compatible 7" capacitive touchscreen Smartphone Features: designed to work with CarPlay and Android Auto built-in iPod, iPhone, and iPad control Android control through USB Pandora and Spotify control with iPhone and Android Siri Eyes Free Control; works with Google Assistant Metra 95-6549 Dash Kit Compatible with 1997-2002 Jeep WranglerGeneral Features: ISO DDIN radio provision Complete the center dash panel for a factory look Metra 70-1817 Wiring Harness Compatible with 1984-2005 Chrysler-Plymouth-Dodge-JeepGeneral Features: Plugs into car harness at radio Provides Power 4 Speaker connection Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.