Alpine Jeep Wrangler (37)

Alpine PSS-23WRA2 Audio System Upgrade Kit for 2018-2025 Jeep Wrangler (JL), Gladiator & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle This 300-watt powered sound system upgrade increases overall dynamic range and adds much-needed “top-off” sound performance to the Jeep Wrangler JL and Jeep Gladiator. General Features: 45W x 4 + 120W RMS System Power (300W) Pre-assembled kit; ready to mount, plug and play system PWE-S8 8” Powered Subwoofer KTP-445U Universal Power Pack Amplifier Mounting brackets for the PWE-S8 and KTP-445U SPR-10TW-WRA 2” Component Tweeters Tweeter adapters T-harness for installation into a compatible Jeep Wrangler JL Vehicle-specific wiring harness included Not compatible with OEM Alpine Premium Sound Systems Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-23WRA2 Audio System Upgrade Kit for 2018-2025 Jeep Wrangler (JL), Gladiator This 300-watt powered sound system upgrade increases overall dynamic range and adds much-needed “top-off” sound performance to the Jeep Wrangler JL and Jeep Gladiator. General Features: 45W x 4 + 120W RMS System Power (300W) Pre-assembled kit; ready to mount, plug and play system PWE-S8 8” Powered Subwoofer KTP-445U Universal Power Pack Amplifier Mounting brackets for the PWE-S8 and KTP-445U SPR-10TW-WRA 2” Component Tweeters Tweeter adapters T-harness for installation into a compatible Jeep Wrangler JL Vehicle-specific wiring harness included Not compatible with OEM Alpine Premium Sound Systems Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SPV-65-JLT Rear Soundbar Upgrade Compatible Fits for 2018+ Jeep Wrangler and 2020+ Jeep Gladiator & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle The SPV-65-JLT Rear Soundbar Upgrade Kit for the new 2018 – Up Jeep® Wrangler and 2020 Jeep® Gladiator.The kit is designed to replace the factory 3-inch and 4-inch drivers, with two 6.5-inch component speakers and 1-inch Teteron Dome Tweeter.The kit is weather-resistant (IP55) and boasts 90W RMS/225W Peak while providing a premium look to the factory sound system.The SPV-65-JLT gives you the top-off performance you’ve been craving from your 2018 - Up Jeep® Wrangler and 2020 - Up Jeep® Gladiator with a powerful sound bar upgrade kit that defies the elements and improves the range of sound reproduction.Raise the Bar – Replace the factory 3-inch and 4-inch drivers with Alpine’s premium 6.5” mid-bass drivers and 1” teteron dome tweeters for improved range of sound reproduction.Top-Off Performance – This Weather-Resistant system is designed to deliver premium performance whether you’re driving with your top and doors on or off.Guided Installation – Cut out the guess work with the included installation kit and vehicle-specific connectors for a plug-and-play installation. General Features:• Two 6.5-inch mid-bass drivers (Weather-resistant: IP55)• Two 1-inch Teteron dome tweeters (Weather-resistant: IP55)• Premium-style grills• Vehicle specific connectors• Nominal impedance 4Ω• Steel frame• Power Rating: 90W RMS/225W Peak• Includes template for cutting• Utilizes factory bolt holes• 4-channel powered system upgrade Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SPV-65-JLT Rear Soundbar Upgrade Compatible Fits for 2018+ Jeep Wrangler and 2020+ Jeep Gladiator The SPV-65-JLT Rear Soundbar Upgrade Kit for the new 2018 – Up Jeep® Wrangler and 2020 Jeep® Gladiator.The kit is designed to replace the factory 3-inch and 4-inch drivers, with two 6.5-inch component speakers and 1-inch Teteron Dome Tweeter.The kit is weather-resistant (IP55) and boasts 90W RMS/225W Peak while providing a premium look to the factory sound system.The SPV-65-JLT gives you the top-off performance you’ve been craving from your 2018 - Up Jeep® Wrangler and 2020 - Up Jeep® Gladiator with a powerful sound bar upgrade kit that defies the elements and improves the range of sound reproduction.Raise the Bar – Replace the factory 3-inch and 4-inch drivers with Alpine’s premium 6.5” mid-bass drivers and 1” teteron dome tweeters for improved range of sound reproduction.Top-Off Performance – This Weather-Resistant system is designed to deliver premium performance whether you’re driving with your top and doors on or off.Guided Installation – Cut out the guess work with the included installation kit and vehicle-specific connectors for a plug-and-play installation. General Features:• Two 6.5-inch mid-bass drivers (Weather-resistant: IP55)• Two 1-inch Teteron dome tweeters (Weather-resistant: IP55)• Premium-style grills• Vehicle specific connectors• Nominal impedance 4Ω• Steel frame• Power Rating: 90W RMS/225W Peak• Includes template for cutting• Utilizes factory bolt holes• 4-channel powered system upgrade Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 6.5" Coaxial + Absolute MPS65B Rollbar Speakers for 2007-2018 Jeep Wrangler JK Alpine SPV-65X-WRA Weather Resistant 6.5" Speakers for 2007-18 Jeep Wrangler JK + Pair of Absolute MPS65B 6.5" Black Wakeboard Tower Speakers With 200 Watts Each Speaker - Truly Marine Grade Withstands Salt Spray, Water, and Sunlight ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Including factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer Absolute MPS65BK Black Marine-Grade RV Titanium 6.5" 200W RMS Total Wake Tower POD Waterproof Enclosure Speaker (ONE PAIR) This pair of Titanium Marine-Grade 6.5" 400-Watt Black Wake Tower POD Speakers from Absolute USA is housed in a 100% waterproof enclosure. The speaker system is made of high-density ABS construction with UV coating. The steel-reinforced mounting bracket fits most towers. The speaker cone is polypropylene, and the tweeter is titanium. Terminals are quick-disconnect compression types. The RMS on this system is 200Watts, the frequency response is 40Hz–20kHz. Dimensions are 8.5"H x 8.5"W x 9"D. A braided stainless-steel safety cable and stainless-steel mounting hardware are included. General Feature: 6.5” 2-WAY MARINE POD SPEAKER SYSTEM High Fidelity Speaker System Fully Marinized Against Salt & Fresh Water Conditions 100% Completely Waterproof and Rustproof Enclosure & Speaker System injection-molded polypropylene-mica composite cone High-Density ABS Construction with UV Coating Internally Braced Steel Reinforced Nylon Bracket Steel-Reinforced Mounting Bracket Fits Most Towers 1” Polypropylene Speaker Cone with Rubber Surround Adjustable Nylon Mounting Bracket Reinforced with Embedded Steel Completely Water / Rust Resistant Terminals Are Sealed with Rubber Gaskets Specially Tuned for PA Voice Over Polypropylene Mica Injected Cone with Santorini Surround High BL Magnet Motor Structure 1" titanium dome tweeter Heavy Duty Plastic Construction Quick Connect Speaker Terminals 100 Watts RMS Each / 200 Watts RMS Total Power Handling 200 Watts Max Each / 400 Watts Max Total Power Handling Frequency Response 40Hz-20KHz Impedance 4-Ohms Sensitivity 90dB @ 1w/1m Mounting Depth 9” dimensions: 7" x 9-1/2" 2.5" Mounting clamps 360-degree swivel mounts System Includes One Pair Wake Board Speakers Stainless Steel Mounting Brackets Integrated Grills Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 6.5" Coaxial + Absolute MPS65W Rollbar Speakers for 2007-2018 Jeep Wrangler JK Alpine SPV-65X-WRA Weather Resistant 6.5" Speakers for 2007-18 Jeep Wrangler JK + Pair of Absolute MPS65W 6.5" White Wakeboard Tower Speakers With 200 Watts Each Speaker - Truly Marine Grade Withstands Salt Spray, Water, and Sunlight ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer Absolute MPS65W White Marine-Grade RV Titanium 6.5" 200W RMS Total Wake Tower POD Waterproof Enclosure Speaker (ONE PAIR) This pair of Titanium Marine-Grade 6.5" 400-Watts White Wake Tower POD Speakers from Absolute USA is housed in a 100% waterproof enclosure. The speaker system is made of high-density ABS construction with UV coating. The steel-reinforced mounting bracket fits most towers. The speaker cone is polypropylene, and the tweeter is titanium. Terminals are quick-disconnect compression types. The RMS on this system is 200Watts, the frequency response is 40Hz–20kHz. Dimensions are 8.5"H x 8.5"W x 9"D. A braided stainless-steel safety cable and stainless-steel mounting hardware are included. General Feature: 6.5” 2-WAY MARINE POD SPEAKER SYSTEM High Fidelity Speaker System Fully Marinized Against Salt & Fresh Water Conditions 100% Completely Waterproof and Rustproof Enclosure & Speaker System injection-molded polypropylene-mica composite cone High-Density ABS Construction with UV Coating Internally Braced Steel Reinforced Nylon Bracket Steel-Reinforced Mounting Bracket Fits Most Towers 1” Polypropylene Speaker Cone with Rubber Surround Adjustable Nylon Mounting Bracket Reinforced with Embedded Steel Completely Water / Rust Resistant Terminals Are Sealed with Rubber Gaskets Specially Tuned for PA Voice Over Polypropylene Mica Injected Cone with Santorini Surround High BL Magnet Motor Structure 1" titanium dome tweeter Heavy Duty Plastic Construction Quick Connect Speaker Terminals 100 Watts RMS Each / 200 Watts RMS Total Power Handling 200 Watts Max Each / 400 Watts Max Total Power Handling Frequency Response 40Hz-20KHz Impedance 4-Ohms Sensitivity 90dB @ 1w/1m Mounting Depth 9” dimensions: 7" x 9-1/2" 2.5" Mounting clamps 360-degree swivel mounts System Includes One Pair Wake Board Speakers Stainless Steel Mounting Brackets Integrated Grills Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Including factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on the box Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System Compatible Fit Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Including factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice Sheet Installation instructions Specifications on the box Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine ILX-F509 Halo9 9" Multimedia Touchscreen Receiver & A Pair Alpine SXE-1726S 6.5" Coax and A Pair SXE-6926S 6x9 Coax Speakers Enhance your car's audio experience with this comprehensive bundle featuring top-quality Alpine products. The set includes the Alpine iLX-F509 Halo9 Multimedia Receiver, boasting a 9-inch Floating HD Touchscreen Display for a futuristic dash upgrade. Enjoy Wireless Apple CarPlay and Android Auto, Hi-Res Audio playback, and Bluetooth hands-free calling. The receiver also offers 5-band graphic EQ and 13-band parametric EQ per channel, ensuring impeccable audio tuning. With a 9” screen, Hi-Res Audio playback, and multiple connectivity options like AUX, HDMI, and USB inputs, this receiver elevates your in-car entertainment. The bundle also comes with Alpine SXE-6926S 6x9" 2-Way Coaxial Speakers and Alpine SXE-1726S 6 1/2" 2-way Coaxial Speakers delivering powerful sound with 280 Watts and 220 Watts peak power respectively. Elevate your driving experience with this premium audio bundle from Alpine. Alpine Halo Design with Adjustable Floating Style Display for a futuristic look in your car Hi-Res Audio Playback and 5-Band Graphic or 13-Band Parametric EQ for superior sound quality Apple Carplay and Android Auto for seamless smartphone integration on a 9" High-Resolution Touchscreen Pair of Alpine SXE Speakers: SXE-6926S - 280W Max Power & SXE-1726S - Neodym Tweeter Magnet for crisp sound Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine iLX-507 7" Multimedia Receiver Wireless Apple CarPlay & Wireless Android Auto & 2 Pairs Alpine SXE-6926S 6x9 Coax Speakers w/Power Pack This bundle features the Alpine iLX-507 7" Multimedia Receiver with Wireless Apple CarPlay and wireless Android Auto, 2x Alpine SXE-6926S 6x9" Coaxial Speakers (Pair), and the Alpine KTA-450 4-channel Power Pack Amplifier. The iLX-507 boasts a 7-inch display, HD Radio, Bluetooth, and compatibility with Apple CarPlay and Android Auto. The SXE-6926S speakers offer 45W RMS power and Mylar tweeters. The KTA-450 Power Pack Amplifier is compact, measuring 7" x 3.5" x 1.25", and uses Dynamic Peak Power technology for a power boost. It features 4-Channel 50W RMS output at 4 Ohms and includes a power harness and mounting brackets.  Perfect for enhancing your car's audio system with quality components and advanced features. iLX-507: Apple CarPlay and Android Auto compatibility for smartphone access, 13-band EQ, HD Radio, and wireless connectivity options SXE-6926S: 280W peak power, 45W RMS, 2-way design, extended fiber pulp woofer, and Mylar tweeter for clear sound quality KTA-450: Compact Class D amplifier with DPP technology, PowerStack Capability, no new power supply wire needed, and dynamic peak power  Easy installation with recessed wire design, power output up to 100W RMS x 4, THD <0.2%, and includes input/output/power wire harness. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.