Alpine Amplifier Installation & Accessories (5)

Alpine RUX-H02 Halo wireless volume knob and subwoofer level controller for Alpine Halo and select Restyle receivers. Rotary volume and bass control for Alpine Halo receivers...Alpine's RUX-H02 Halo level controller lets you add a knob to your new Alpine touchscreen stereo so you can crank the overall volume or bass as your ancestors did — with a righteous flick of the wrist. This knob matches the rounded corners and beveled-edge styling of your Halo receiver. It attaches to its floating screen, holding the control correctly for handy adjustments from the driver's seat. You can control the bass by pushing the knob in as you twist. ...without wires!The RUX-H02 incorporates advanced Bluetooth® Low Energy technology to command the action without running another wire from your dash to the back of the receiver or sub-amplifier (if your system has an amp). A blue LED light lets you know the knob is active and ready to pair with your receiver. The RUX-H02 is powered by a compact lithium battery that can be easily replaced.The RUX-H02 knob works with the Alpine iLX-F509 Halo9 and iLX-F511 Halo11 receivers, as well as the i509-WRA-JK and i509-WRA-JL Restyle receivers for Jeep Wrangler and Gladiator models, and the iLX-507 digital multimedia receiver.General Features: remote level controller for select Alpine touchscreen receivers built-in Bluetooth LE technology for wireless operations replaceable lithium CR2025 battery cell Blue LED indicator controls volume and subwoofer level Turn left/right to change the volume  push in a while, turning left/right to change sub-sub-level mounts to an Alpine Halo receiver with included mounting hardware Works with the following Alpine receivers: iLX-507 iLX-F509 iLX-F511 i509-WRA-JK i509-WRA-JL What's in the RUX-H02 package: RUX-H02 owner's manual Wireless remote knob CR2032 3V battery Metal bracket Plastic bracket 2 Philips-head screws 2 Flat-head screws Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDA-V90 Status HDA-V90 Hi-Res 5-Channel Amplifier, 75W x 4 + 300W x 1 @ 4-Ohm, 100W x 4 + 500W x 1 @ 2-Ohm & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With the highest-quality music streaming available, Alpine Status delivers a superior audio performance that will take your music to a whole new level. General Features: Hi-Res Audio Playback (192kHz/24Bit) 5-Channel Amplifier High-Efficiency Digital Circuit Design Alpine’s Dual Negative Feedback Control Circuit High Bandwidth Amplifier Alpine’s Premium Class D Circuit Design Copper-plated chassis Black circuit board One-sided terminal layout Top panel sound controls Quick connect power and speaker terminals Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately) Tech Specs Dimensions: 11.4375” x 7.5” x 2.125” Power Rating: (14.4V, ≤1.0% THD+N) 75W x 4 + 300W x 1 @ 4Ω 100W x 4 + 500W x 1 @ 2Ω Bridged: 200W x 2 @ 4Ω (ch1/2, ch3/4 only) THD+N: 0.02% (10W into 4 ohms) S/N Ratio: 87dB (1W into 4 ohms) Frequency response: 8-60kHz (-3dB) Damping factor: 500 (ch1/2/3/4), 1000 (subwoofer) Selectable input level – HI/LO Selectable 2/4/6ch input Variable High pass / Low pass crossover Variable Subsonic filter (subwoofer) Bass EQ (0 to +12dB, Variable) Auto-turn on with remote sensing Superior Sound Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status System features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, which, when used as a complete system, can achieve 192kHz/24Bit playback. Impressive Output Powering a Hi-Res sound system without contributing noise during playback requires efficiency and precision, and the HDA-V90 was intentionally designed to provide impressive power output to the system while ensuring the purest audio performance. The amplifier’s wide dynamic range capability provides impressive output in a compact chassis that fits most vehicle applications. Precise Sound Reproduction The HDA-V90 features a high-efficiency digital circuit design that ensures ultra-low distortion levels for precise sound reproduction and superb sound quality. Intentional designs, like a copper-plated chassis and black circuit board, bring the signal-to-noise ratio up to 87dB and minimize noise and distortion during playback for complete music fidelity that’s true to the original source. Incredible Reliability Featuring technology unique to Alpine, the amplifier features Alpine’s dual negative feedback control circuit to improve linearity for the most accurate sound amplification. This technology also stabilizes the amplifier output while driving the speakers and subwoofers for ultimate reliability. Easy Installation The HDA-V90 features Alpine’s quick-connect power and speaker connectors for quick and safe installation. The one-sided terminal layout and top-panel sound controls give the user quick access to controls on the amplifier. Optimized For Full System The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDA-V90 Status HDA-V90 Hi-Res 5-Channel Amplifier, 75W x 4 + 300W x 1 @ 4-Ohm, 100W x 4 + 500W x 1 @ 2-Ohm With the highest-quality music streaming available, Alpine Status delivers a superior audio performance that will take your music to a whole new level. General Features: Hi-Res Audio Playback (192kHz/24Bit) 5-Channel Amplifier High-Efficiency Digital Circuit Design Alpine’s Dual Negative Feedback Control Circuit High Bandwidth Amplifier Alpine’s Premium Class D Circuit Design Copper-plated chassis Black circuit board One-sided terminal layout Top panel sound controls Quick-connect power and speaker terminals Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately) Tech Specs Dimensions: 11.4375” x 7.5” x 2.125” Power Rating: (14.4V, ≤1.0% THD+N) 75W x 4 + 300W x 1 @ 4Ω 100W x 4 + 500W x 1 @ 2Ω Bridged: 200W x 2 @ 4Ω (ch1/2, ch3/4 only) THD+N: 0.02% (10W into 4 ohms) S/N Ratio: 87dB (1W into 4 ohms) Frequency response: 8-60kHz (-3dB) Damping factor: 500 (ch1/2/3/4), 1000 (subwoofer) Selectable input level – HI/LO Selectable 2/4/6ch input Variable High pass / Low pass crossover Variable Subsonic filter (subwoofer) Bass EQ (0 to +12dB, Variable) Auto-turn on with remote sensing Superior Sound Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status System features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, which, when used as a complete system, can achieve 192kHz/24Bit playback. Impressive Output Powering a Hi-Res sound system without contributing noise during playback requires efficiency and precision, and the HDA-V90 was intentionally designed to provide impressive power output to the system while ensuring the purest audio performance. The amplifier’s wide dynamic range capability provides impressive output in a compact chassis that fits most vehicle applications. Precise Sound Reproduction The HDA-V90 features a high-efficiency digital circuit design that ensures ultra-low distortion levels for precise sound reproduction and superb sound quality. Intentional designs, like a copper-plated chassis and black circuit board, bring the signal-to-noise ratio up to 87dB and minimize noise and distortion during playback for complete music fidelity that’s true to the original source. Incredible Reliability Featuring technology unique to Alpine, the amplifier features Alpine’s dual negative feedback control circuit to improve linearity for the most accurate sound amplification. This technology also stabilizes the amplifier output while driving the speakers and subwoofers for ultimate reliability. Easy Installation The HDA-V90 features Alpine’s quick-connect power and speaker connectors for quick and safe installation. The one-sided terminal layout and top-panel sound controls give the user quick access to controls on the amplifier. Optimized For Full System The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine RUX-KNOB.2 Remote Bass Knob for Alpine Amplifiers General Features: Remote Bass Level Control Knob 16-1/2" (5 meters) Connection cable Plugs directly in for quick, direct subwoofer control Specifically designed as the controller for use with any of the following PDX Amplifiers: PDX-M12 and PDX-M6 Easily adjust the bass gain of your amp while seated inside Control multiple amps from just one RUX-KNOB controller Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the package: Alpine Remote Bass Level Control module 16.4'  connecting cable  4 Self-tapping screws Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.