Alpine 5-Channel or more Amps (11)

Alpine PDX-V9 1600W Max, 5-Channel PDX Series Car Amplifier 100 watts RMS x 4 + 500 watts RMS x 1 The Alpine PDX Series is a recipient of the 2010 CES Innovations honors award. Every year at the world’s largest consumer technology tradeshow, the Consumer Electronics Show (CES), the Innovations Designs and Engineering Awards program recognizes the most innovative consumer electronics products, such as the PDX Series for the In-Vehicle Audio category. The all-new PDX series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for low distortion and wide frequency response. These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, PDX-F4, and PDX-V9 are synonymous with extremely high resolution and detail. General Features: 5-Channel PDX Series Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 Channel + 500 watts x 1 Channel RMS Power Rating: 2 ohms: 100 watts x 4 Channel  + 500 watts x 1 Channel RMS Power Rating: Bridged, 4 ohms: 200 watts x 2 Channel  PDX Technology for increased performance and durability Sleek Aggressive Design w/ End Caps Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on 5 channel operation Wired Bass Remote Ready Alpine RUX KNOB is Required and Sold separately Alpine RUX-KNOB.2 is also compatible with this amp 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy-duty aluminum alloy heat sink for extreme heat dissipation Nickel-plated RCA-level inputs Nickel-plated screw terminals Input sensitivity: Variable high-pass filter (30-600 Hz, 24 dB/octave) Variable low-pass filter (30-600 Hz, 24 dB/octave) Variable Subsonic filter (3-30 Hz) Damping factor: >500 CEA-2006 compliant amplifier Frequency response: 5-45,000 Hz 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 10-5/8"W x 7-1/2"D x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the PDX-V9 package: PDX-V9 owner's manual 5-Channel Class-D amplifier Battery connector plug 5 Speaker connector plugs Four M4 x 36mm Hex/Phillips-head self-tapping screws 2mm Allen wrench 4mm Allen wrench Owner's Manual (Eng/Fre/Spa) Verification Certificate Limited Warranty Card Online Registration Card ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Alpine PDX-V9 1600W Max, 5-Channel PDX Series Car Amplifier 100 watts RMS x 4 + 500 watts RMS x 1 + RUX-KNOB.2 Remote Bass Level Control And Absolute KIT4 4 Gauge Amp Kit Alpine PDX-V9 1600W Max, 5-Channel PDX Series Car Amplifier 100 watts RMS x 4 + 500 watts RMS x 1 The Alpine PDX Series is a recipient of the 2010 CES Innovations honors award. Every year at the world’s largest consumer technology tradeshow, the Consumer Electronics Show (CES), the Innovations Designs and Engineering Awards program recognizes the most innovative consumer electronics products, such as the PDX Series for the In-Vehicle Audio category. The all-new PDX series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for low distortion and wide frequency response. These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, PDX-F4, and PDX-V9 are synonymous with extremely high resolution and detail. General Features: 5-Channel PDX Series Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 Channel + 500 watts x 1 Channel RMS Power Rating: 2 ohms: 100 watts x 4 Channel  + 500 watts x 1 Channel RMS Power Rating: Bridged, 4 ohms: 200 watts x 2 Channel  PDX Technology for increased performance and durability Sleek Aggressive Design w/ End Caps Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on 5 channel operation Wired Bass Remote Ready Alpine RUX KNOB is Required and Sold separately Alpine RUX-KNOB.2 is also compatible with this amp 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy-duty aluminum alloy heat sink for extreme heat dissipation Nickel-plated RCA-level inputs Nickel-plated screw terminals Input sensitivity: Variable high-pass filter (30-600 Hz, 24 dB/octave) Variable low-pass filter (30-600 Hz, 24 dB/octave) Variable Subsonic filter (3-30 Hz) Damping factor: >500 CEA-2006 compliant amplifier Frequency response: 5-45,000 Hz 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 10-5/8"W x 7-1/2"D x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the PDX-V9 package: PDX-V9 owner's manual 5-Channel Class-D amplifier Battery connector plug 5 Speaker connector plugs Four M4 x 36mm Hex/Phillips-head self-tapping screws 2mm Allen wrench 4mm Allen wrench Owner's Manual (Eng/Fre/Spa) Verification Certificate Limited Warranty Card Online Registration Card Alpine RUX-KNOB.2 Remote subwoofer level control remote level controller for Alpine amplifiers The optional RUX-KNOB2 remote bass control knob plugs right into the Alpine Amplifiers for quick, direct subwoofer control to make bass adjustments on the fly.Get full control over your amplifier conveniently from inside the car. With the RUX-KNOB2 installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.The RUX-KNOB2 comes with a 5-meter cable that plugs into your amplifier.General Features: mono amps subchannel of 5-channel amps bridged channels 3/4 of the?X-A70F adjusts gain from 0 to -12 dB multi-amp capable (standard phone cable splitter required ? not included) 16' connection cable ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Alpine PDX-V9 1600W Max, 5-Channel PDX Series Car Amplifier 100 watts RMS x 4 + 500 watts RMS x 1 + Alpine PXE-0850X 12-Channel Advanced Wireless Digital Sound Processor Alpine PDX-V9 1600W Max, 5-Channel PDX Series Car Amplifier 100 watts RMS x 4 + 500 watts RMS x 1 The Alpine PDX Series is a recipient of the 2010 CES Innovations honors award. Every year at the world’s largest consumer technology tradeshow, the Consumer Electronics Show (CES), the Innovations Designs and Engineering Awards program recognizes the most innovative consumer electronics products, such as the PDX Series for the In-Vehicle Audio category. The all-new PDX series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for low distortion and wide frequency response. These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, PDX-F4, and PDX-V9 are synonymous with extremely high resolution and detail. General Features: 5-Channel PDX Series Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 Channel + 500 watts x 1 Channel RMS Power Rating: 2 ohms: 100 watts x 4 Channel  + 500 watts x 1 Channel RMS Power Rating: Bridged, 4 ohms: 200 watts x 2 Channel  PDX Technology for increased performance and durability Sleek Aggressive Design w/ End Caps Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on 5 channel operation Wired Bass Remote Ready Alpine RUX KNOB is Required and Sold separately Alpine RUX-KNOB.2 is also compatible with this amp 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy-duty aluminum alloy heat sink for extreme heat dissipation Nickel-plated RCA-level inputs Nickel-plated screw terminals Input sensitivity: Variable high-pass filter (30-600 Hz, 24 dB/octave) Variable low-pass filter (30-600 Hz, 24 dB/octave) Variable Subsonic filter (3-30 Hz) Damping factor: >500 CEA-2006 compliant amplifier Frequency response: 5-45,000 Hz 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 10-5/8"W x 7-1/2"D x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the PDX-V9 package: PDX-V9 owner's manual 5-Channel Class-D amplifier Battery connector plug 5 Speaker connector plugs Four M4 x 36mm Hex/Phillips-head self-tapping screws 2mm Allen wrench 4mm Allen wrench Owner's Manual (Eng/Fre/Spa) Verification Certificate Limited Warranty Card Online Registration Card Alpine PXE-0850X 8-channel car amplifier with digital signal processing 25 watts RMS x 8 As newer and newer vehicles are equipped with highly integrated displays and complex sound systems, the stand-alone DSP, Digital Signal Processor, is becoming crucial for building the next-level Alpine sound system. How do you upgrade your sound without changing your head unit? It may not be just as simple as adding amplifiers anymore. Modern factory systems generally have speakers playing a specific range of frequencies which makes it difficult to improve on sound and add aftermarket amplifiers. The Alpine PXE-0850S allows you to take up to 6 independent signals (3 per side, for example) and combine them to create a full range signal. Once you have that full-range signal, you can send them to up to 12 independent channels allowing for extreme versatility in system building. The PXE-0850S has an LCD remote controller that can be flush-mounted on the dash. Use the rotary knob to quickly control volume, preset storage and recall, and source selection. You can also view the results on the remote controller’s LED screen. The controller adds quick adjustability to your system if needed or it can be left out altogether if smartphone control is enough. General Features: Music & navigation sound mixing Can arbitrarily adjust the volume ratio of main/sub audio source Full-frequency mode is added, and each channel can be set to full-frequency mode, which solves the problem that channels cannot be distributed in projects such as audition rooms and RVs to reduce the setting time. Split-screen display, adding delay group, more convenient operation! Total volume adjustment Bass volume adjustment Sound source switching Auxiliary sound source switching EQ preset switching Frequency response: 20Hz - 20KHz Inputs: 6 high-level signal inputs, 6-channel RCA signal, Bluetooth signal input Outputs: 8 x 25W (Rated power), 12-channel RCA output 2.0 multichannel surround 31 Bands parametric EQ Hi-pass / Low-pass / Bandpass Crossover Time delays of up to 20 MS per channel Input/output frequency summing Music & navigation sound mixing Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features: Alpine X-Series X-A90V Class-D Full Range 2 ohm Stable 5-Channel Amplifier RMS Power Rating: 4-channel side 4 ohms: 75 watts x 4 channel 2 ohms: 100 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 200 watts x 2 channel Subchannel 4 ohms: 300 watts x 1 chan. 2 ohms: 500 watts x 1 chan. 1 ohm: ------------N/A------------ Total power output: 900 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote bass level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 5/3 channel operation Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .5 - 10V Low level: .2 - 4V Frequency Response: 4-channel: 10 - 60,000Hz Sub-channel: 8 - 400Hz Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >105dB Variable high-pass filter: 50 - 400Hz, -24dB/octave Variable low-pass filter: 50 - 400Hz, -24dB/octave Subsonic filter: 8 - 40Hz Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 30A x 3 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the box: -Channel amplifier Three 30A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 3 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet Alpine X-A90V owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine PDX-V9 1600W Max, 5-Channel PDX Series Car Amplifier 100 watts RMS x 4 + 500 watts RMS x 1 The Alpine PDX Series is a recipient of the 2010 CES Innovations honors award. Every year at the world’s largest consumer technology tradeshow, the Consumer Electronics Show (CES), the Innovations Designs and Engineering Awards program recognizes the most innovative consumer electronics products, such as the PDX Series for the In-Vehicle Audio category. The all-new PDX series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for low distortion and wide frequency response. These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, PDX-F4, and PDX-V9 are synonymous with extremely high resolution and detail. General Features: 5-Channel PDX Series Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 Channel + 500 watts x 1 Channel RMS Power Rating: 2 ohms: 100 watts x 4 Channel  + 500 watts x 1 Channel RMS Power Rating: Bridged, 4 ohms: 200 watts x 2 Channel  PDX Technology for increased performance and durability Sleek Aggressive Design w/ End Caps Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on 5 channel operation Wired Bass Remote Ready Alpine RUX KNOB is Required and Sold separately Alpine RUX-KNOB.2 is also compatible with this amp 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy-duty aluminum alloy heat sink for extreme heat dissipation Nickel-plated RCA-level inputs Nickel-plated screw terminals Input sensitivity: Variable high-pass filter (30-600 Hz, 24 dB/octave) Variable low-pass filter (30-600 Hz, 24 dB/octave) Variable Subsonic filter (3-30 Hz) Damping factor: >500 CEA-2006 compliant amplifier Frequency response: 5-45,000 Hz 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 10-5/8"W x 7-1/2"D x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the PDX-V9 package: PDX-V9 owner's manual 5-Channel Class-D amplifier Battery connector plug 5 Speaker connector plugs Four M4 x 36mm Hex/Phillips-head self-tapping screws 2mm Allen wrench 4mm Allen wrench Owner's Manual (Eng/Fre/Spa) Verification Certificate Limited Warranty Card Online Registration Card ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.