Alpine 4-Channel Amplifiers (61)

Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW. General Features: Alpine KTA-450 Class D 4-channel Weather Resistant Power Pack Amplifier CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category Power Handling 50W RMS x 4 @ 4 Ohms 45W RMS x 4 @ 2 Ohms Total Power Handling: 200W RMS CTA-2006 compliant Frequency Response: 15-50 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels Fuse Rating: 15A Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-450 Package: KTA-450 Package owner's manual 4-Channel amplifier Wiring harness Mounting plate 2 Mounting brackets 4 Wire-ties 4 Hex-head machine screws 2 Pan-head machine screws 4 Pan-head self-tapping screws Warranty Information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-F1200 4CH Amplifier BBX-T600 2CH Car Speaker Audio Amplifier Package Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp delivers high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs What's in the BBX-T600 package: BBX-T600 owner's manual Two Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. It's a great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the BBX-F1200 package: BBX-F1200 owner's manual Four Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute KIT0 0 Gauge / 2500 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute KIT4 4 Gauge / 2000 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute KIT8 8 Gauge / 1000 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute TW500 Piezo Super Dome Tweeter &  Electrical Tape & Cell phone Mobile Bracket Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & Absolute KIT0 0 Gauge / 2500 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & Absolute KIT4 4 Gauge / 2000 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & Absolute KIT8 8 Gauge / 1000 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.