All Products – Page 89

Audio Control AC-BT1 All-Weather Bluetooth® Streamer to an RCA or AUX input $89.99 $179.98

Audio Control AC-BT1 All-Weather Bluetooth® Streamer to an RCA or AUX input General Features: High Definition Low-Latency Audio Streaming aptXTM HD Support 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec IPX5 rated enclosure Built in fuse Signal to Noise Ratio: 95 dB Current Draw: 35 mA Fuse Rating: 2 A Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -73% sale

Audio Control AC-BT24 Bluetooth Streamer and Programmer For DM-810, DM-608 DSP and D-6.1200 DSP Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control AC-BT24 Bluetooth Streamer and Programmer For DM-810, DM-608 DSP and D-6.1200 DSP Amplifier $139.99 $499.98

Audio Control AC-BT24 Bluetooth Streamer and Programmer For DM-810, DM-608 DSP and D-6.1200 DSP Amplifier The AC-BT24 enables high definition Bluetooth® audio streaming (aptX HD support) and programming for AudioControl DSP products featuring the Option Port. Stream hires audio directly to the DM-810 and DM-608 DSP or the D-6.1200 DSP amplifier and program the DSP simultaneously. The AC-BT24 also allows for complete DSP setup and programming using the DM Smart DSP app for iOS and Android. General Features: High Definition Low-Latency Audio Streaming aptXTM HD Support 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec Wireless DSP Programming via DM Smart DSP™ app for iOS/Android Simultaneous Audio Streaming and DSP Programming Bluetooth Version: 4.2 UART Interface Dual Differential Class AB Output Stage Power Requirements: Provided by Option Port Dimensions: 1.4” L x 1.0” W x 0.5” H Weight: 0.3 oz (9 g) Signal to Noise Ratio: 96 dB Maximum Data Rate: 3 Mbps (typical 1.6 Mbps) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-44% sale

Audio Control THE EPICENTER Digital Bass Restoration Processor with Bass Remote

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control THE EPICENTER Digital Bass Restoration Processor with Bass Remote $169.99 $299.99

Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to lower your subwoofers, grabbing every eye's attention on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker-level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1 Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5-Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

MR DJ DXO200 PRO PA DJ Club Stereo 2 Way Plus Subwoofer Crossover with XLR Input

00
DAYS 00
HRS 00
MIN 00
SEC

MR DJ DXO200 PRO PA DJ Club Stereo 2 Way Plus Subwoofer Crossover with XLR Input $119.99 $239.99

MR DJ DXO200 PRO PA DJ Club Stereo 2 Way Plus Subwoofer Crossover with XLR Input & Output MR DJ DXO200 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO200 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO2 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands, sending the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 2-Way Stereo Crossover + Subwoofer Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 20-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 250-6000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

MR DJ DXO200 PRO PA DJ Club Stereo 2 Way Plus Subwoofer Crossover $119.99 $239.99

MR DJ DXO200 PRO PA DJ Club Stereo 2 Way Plus Subwoofer Crossover with XLR Input & Output MR DJ DXO200 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO200 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO2 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands and send the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 2-Way Stereo Crossover + Subwoofer Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 20-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 250-6000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

MR DJ DXO300 PRO PA DJ Club Stereo 2/3 Way Plus Subwoofer Crossover XLR Input

00
DAYS 00
HRS 00
MIN 00
SEC

MR DJ DXO300 PRO PA DJ Club Stereo 2/3 Way Plus Subwoofer Crossover XLR Input $129.99 $259.99

MR DJ DXO300 PRO PA DJ Club Stereo 2/3 Way Plus Subwoofer Crossover with XLR Input & Output MR DJ DXO300 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO300 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO3 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands and send the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 3-Way Stereo Crossover + Subwoofer 2-way Stereo / 3-way Mono rack mountable crossover Subwoofer Output Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 25-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 70-1000 Hz Mid/High: 480-7000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -46% sale

Audio Control LC2i 2 Channel Line Out Converter with AccuBASS Subwoofer Control

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC2i 2 Channel Line Out Converter with AccuBASS Subwoofer Control $109.00 $199.98

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system The LC2i is a compact, two-channel processor with active input circuitry. It can accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound. What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -47% sale

Audio Control LC2i PRO 2-Channel Line Output Converter

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC2i PRO 2-Channel Line Output Converter $139.00 $259.98

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -50% sale

Audio Control LC1i Active 2-channel line driver/output converter

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC1i Active 2-channel line driver/output converter $79.99 $159.98

Audio Control LC1i Active 2-channel line driver/output converter Aftermarket amplifiers and DSP sound processors need clean and strong input signals, whether they come from a receiver's RCA outputs or a factory amp's speaker outputs. AudioControl's LC1i line output converter can produce up to 9.5 volts of preamp-level output in either case, acting as a line driver using its RCA inputs or as a line output converter using the speaker-level inputs. General Features: active 2-channel line driver/output converter designed to work with aftermarket and factory systems provides up to 9.5 Vrms output preamp and speaker-level inputs auto turn-on via DC offset or audio detect level control and Maximized LED indicator Other Features: load selection switch for OEM integration (20, 60, or 20,000 ohms) 12-volt turn-on lead output speaker-level inputs feature switchable load resistance to prevent factory stereo shut-down wiring, fuse, and hardware are not included with the device ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-57% sale

Audio Control LC7i 6-channel line output converter with bass restoration — adds aftermarket subs and amps to a factory system (Black)

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC7i 6-channel line output converter with bass restoration — adds aftermarket subs and amps to a factory system (Black) $215.00 $499.98

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. General Features: 8-channel line output converter with auxiliary input 8 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 1 pair of RCA auxiliary inputs 8 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: wired remote controls auxiliary and subwoofer levels AutoMode™ turns 6-channel input to 8-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) $269.99 $539.98

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. General Features: 8-channel line output converter with auxiliary input 8 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 1 pair of RCA auxiliary inputs 8 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: wired remote controls auxiliary and subwoofer levels AutoMode™ turns 6-channel input to 8-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Gift Cards from $25.00

Giving Someone A Gift Card Is Simple, Fun and Convenient. Redeemable Online or In-Store. Buy The Perfect Gift Card For Friends, Family, Co-Workers and Everyone In Between.Send ABS Gift Cards by email, print-at-home, or mail with free shipping.

Add to cart

Find anything you need

All Products (8911)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER