All Products (8995)

MR DJ DXO300 PRO PA DJ Club Stereo 2/3 Way Plus Subwoofer Crossover with XLR Input & Output MR DJ DXO300 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO300 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO3 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands and send the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 3-Way Stereo Crossover + Subwoofer 2-way Stereo / 3-way Mono rack mountable crossover Subwoofer Output Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 25-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 70-1000 Hz Mid/High: 480-7000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound. What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. General Features: 8-channel line output converter with auxiliary input 8 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 1 pair of RCA auxiliary inputs 8 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: wired remote controls auxiliary and subwoofer levels AutoMode™ turns 6-channel input to 8-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. General Features: 8-channel line output converter with auxiliary input 8 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 1 pair of RCA auxiliary inputs 8 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: wired remote controls auxiliary and subwoofer levels AutoMode™ turns 6-channel input to 8-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Giving Someone A Gift Card Is Simple, Fun and Convenient. Redeemable Online or In-Store. Buy The Perfect Gift Card For Friends, Family, Co-Workers and Everyone In Between.Send ABS Gift Cards by email, print-at-home, or mail with free shipping.

Audio Control LC6i 6-channel line output converter — add aftermarket amps to a factory system (Black) AudioControl's LC6i 6-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC6i accepts speaker-level signals so you can use it with any setup, even high-powered amplified systems. General Features: 6-channel line output converter 6 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 6 preamp outputs (up to 9.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: optional wired remote subwoofer level controller available (#161ACR1) AutoMode™ turns 4-channel input to 6-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 1 amp 8-1/16"W x 1-3/8"H x 7-1/2"D ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.