All Products – Page 66

Alpine R2-W12D4 2250W 12" R-Series Dual 4-Ohm Car Subwoofer + KTE-12G.3 Grille $539.95 $500.00

Alpine R2-W12D4 2250W Max (750W RMS) 12" R-Series Dual 4-Ohm Car Subwoofer + KTE-12G.3 Grille The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response. General Features: 12" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 127 oz. Strontium ferrite segmented magnet Top-mount depth: 6-3/8" Cutout diameter: 10-7/8" Frequency Response: 24 - 200Hz Sensitivity: 84.3dB Resonance Frequency (Fs): 27Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W12D4 package: R2-W12D2 owner's manual One 12" Dual 4-ohm voice coil subwoofer Two 3" jumper cables R-Series Subwoofer Application Guide Online product registration information Warranty Information https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -51% sale

2 Pairs AUTOTEK ATS693 800W Peak (400W RMS) 6

00
DAYS 00
HRS 00
MIN 00
SEC

2 Pairs AUTOTEK ATS693 800W Peak (400W RMS) 6"x9" ATS Series 3-Way Coaxial Car Speakers $119.99 $239.99

2 Pairs AUTOTEK ATS693 800W Peak (400W RMS) 6"x9" ATS Series 3-Way Coaxial Car Speakers General Features: 6" x 9" Autotek ATS Series 3-way Coaxial Car Speakers Power Handling: Peak: 800 watts per pair / 400 watts each RMS: 400 watts per pair / 200 watts each Silver Alpha-Cellulose Poly cone material Rubber speaker surround 1" Neo-Mylar Soft Dome Tweeters Impact-resistant tweeter elements Anti-resonant stamped steel basket frame Textured ABS gasket Pure Kapton copper voice coil / former assembly Epoxy-infused natural fiber spider Over-coil cooling system Universal fit to vehicles Passive Butterworth crossover CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 3.35" Cutout Dimensions: 8.64 x 5.98 Impedance: 4 ohms Frequency Response: 46 - 20000 Hz Crossover slope: 1kHz + 3kHz 12dB Sensitivity: 88 dB Grilles included Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-13% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Alpine R2-W10D4 10" R-Series next generation 4 Ohm 2250 Max DVC Car Audio Subwoofer + KTE-10G.3 Grills $879.80 $999.99

2 Alpine R2-W10D4 10" R-Series next generation 4 Ohm 2250 Max, 750W RMS DVC Car Audio Subwoofer + KTE-10G.3 Grills Alpine R2-W10D4 2250W Max (750W RMS) 10" R-Series Dual 4-Ohm Car Subwoofer The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. This cone and the Santoprene surround allow the subwoofer to deliver 19mm X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy. MORE RIGID DUST CAP Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the cap's vibration absorption while lowering its density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies. NEW POWER RATING All four R-Series subwoofers are rated at 750W RMS. They perfectly match the PDR-M65 Mono Power Density Amplifier, creating an efficient system. General Features: 10" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250 watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 111 oz. Strontium ferrite segmented magnet Top-mount depth: 5-7/8" Cutout diameter: 9-1/16" Frequency Response: 26 - 200Hz Sensitivity: 82.4dB Resonance Frequency (Fs): 30Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W10D4 package: R2-W10D4 owner's manual 10" Dual 4-ohm voice coil subwoofer 1 Rubber concealing ring Four 3" jumper cables R-Series Subwoofer Application Guide Online product registration information Warranty Information Important Notice! Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. https://www.alpine-usa.com/product/r-series-subwoofer-r2w10d4 https://www.youtube.com/watch?v=J8g6EZzZQyI&t=131s

-28% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-W10D2 Car Subwoofer 1800W 10" Dual 2 Ohm Car Subwoofer with Ported Box $289.95 $400.00

Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer with Absolute VGS10 Ported Subwoofer Box Alpine introduces the all-new S-Series Subwoofers; their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W10D2 package: S-W10D2 owner's manual One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide Online product registration information Warranty Information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-28% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-W10D2 Car Subwoofer 1800W 10" Dual 2 Ohm Car Subwoofer with Sealed Box $289.95 $400.00

Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer with Absolute SS10 Sealed Subwoofer Box Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame in twelve-, ten-, and eight-inch sizes. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporates two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W10D2 package: S-W10D2 owner's manual One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-5% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 ALPINE S-W10D2 10" 1800 Watt Car Audio Subwoofers Dual 2-Ohm & Tweeter, Tape, Mobile Holder $479.90 $499.99

2 Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer with Absolute TW500 Tweeter & Absolute BT1700 Electrical Tape & Mobile Magnet Holder Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch sizes. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporates two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W10D2 package: S-W10D2 owner's manual One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-39% sale

Alpine KTA-200M Mono Power Pack Class-D Amp with S-W10D2 10

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine KTA-200M Mono Power Pack Class-D Amp with S-W10D2 10" Subwoofer $489.90 $799.99

Alpine KTA-200M Mono Power Pack Class-D Amp with Alpine S-W10D2 10" Subwoofer This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W10D2 S-Series 10" Dual 2-Ohm Subwoofer. Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier General Features: Power Stack capable with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty Alpine S-W10D2 S-Series 10" Subwoofer with Dual 2-Ohm Voice Coils. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

Mackie Thump118S 1400 Watt 18-inch Powered Subwoofer + Cover Pole Cable

00
DAYS 00
HRS 00
MIN 00
SEC

Mackie Thump118S 1400 Watt 18-inch Powered Subwoofer + Cover Pole Cable $999.99 $2,000.00

Mackie Thump 118S 1400W 18" Powered PA Subwoofer + Cover & MR DJ Pole and 6 Feet XLR Cable The Mackie Thump118S subwoofer delivers 1400W of raw wall-shaking power to your system. It has selectable voicing modes and a variable crossover to simplify optimization. The flagship subwoofer of the Thump Series, the 1400W Thump118S delivers maximum performance for modern DJs, bands, and clubs. An all-new design features selectable voicing modes that make it easy to tailor the bass to your needs and style. Welcome to the world of Thump, where rumble rules and the music doesn't stop till you say so. Before you get the party started, equip your system with a subwoofer that can keep up. Thump118S brings 1400W of raw wall-shaking power to your system with selectable voicing modes and a variable crossover to simplify optimization. Stereo inputs plus High-Pass and Full-Range outputs offer plenty of configuration flexibility, and integrated top-corner handles are our most ergonomic design yet. So grab one (or two, or three) General Features: 1400W Ultra-Efficient Class-D Amplifier Voicing Modes Optimize Thump118S to Your Needs Variable Crossover and Level Stereo XLR Inputs and Stereo High-Pass + Full-Range Outputs Frequency Response: 30Hz - 200Hz Max SPL: 132 dB Frequency response: 30Hz - 200Hz Max SPL: 132 dB Variable level control (-6dBU to +6dBU) Front LED On/Off Weight: 65.5 lb / 29.71 kg Dimensions: 21.3 x 20.9 x 23.9 in / 541 x 531 x 607 mm (HxWxD) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-50% sale

Mackie Thump118S 1400 Watt 18-inch Powered Subwoofer + 2 MR DJ Cables

00
DAYS 00
HRS 00
MIN 00
SEC

Mackie Thump118S 1400 Watt 18-inch Powered Subwoofer + 2 MR DJ Cables $859.99 $1,699.98

Mackie Thump 118S 1400W 18" Powered PA Subwoofer + 2 MR DJ 6 Feet XLR Cables The Mackie Thump118S subwoofer delivers 1400W of raw wall-shaking power to your system. It has selectable voicing modes and a variable crossover to simplify optimization. The flagship subwoofer of the Thump Series, the 1400W Thump118S delivers maximum performance for modern DJs, bands, and clubs. An all-new design features selectable voicing modes that make it easy to tailor the bass to your needs and style. Welcome to the world of Thump, where rumble rules and the music doesn't stop till you say so. Before you get the party started, equip your system with a subwoofer that can keep up. Thump118S brings 1400W of raw wall-shaking power to your system with selectable voicing modes and a variable crossover to simplify optimization. Stereo inputs plus High-Pass and Full-Range outputs offer plenty of configuration flexibility, and integrated top-corner handles are our most ergonomic design yet. So grab one (or two, or three) General Features: 1400W Ultra-Efficient Class-D Amplifier Voicing Modes Optimize Thump118S to Your Needs Variable Crossover and Level Stereo XLR Inputs and Stereo High-Pass + Full-Range Outputs Frequency Response: 30Hz - 200Hz Max SPL: 132 dB Frequency response: 30Hz - 200Hz Max SPL: 132 dB Variable level control (-6dBU to +6dBU) Front LED On/Off Weight: 65.5 lb / 29.71 kg Dimensions: 21.3 x 20.9 x 23.9 in / 541 x 531 x 607 mm (HxWxD) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-45% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Mackie Thump215XT 1400W 15" Powered PA Loudspeaker System with DSP and Bluetooth $499.99 $900.00

Mackie Thump215XT 15-inch 1400W Enhanced Powered Loudspeaker Mackie Thump215XT 1400W 15" Powered PA Loudspeaker System with DSP and Bluetooth Enhance your next set with Thump215XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump215XT is the ultimate loudspeaker for DJs, bands, and clubs that need pro sound without the insane price tag. Four voicing modes and Bluetooth compatibility No matter your live sound environment, the Thump 212XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. Suppose you’re after even greater sonic control. In that case, the Thump212XT’s Bluetooth connectivity lets you stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and more via the Thump Connect 2 app. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 20kHz Max SPL: 128 dB 15” high-performance woofer 1” compression driver 4 Application-specific voicing modes Music Live Club Monitor Outdoor mode optimizes voicing for open-air venues Bluetooth connectivity for streaming, speaker linking, and control Download the Thump Connect 2 app for complete wireless control Link 2 ThumpXT loudspeakers for a powerful, wireless music playback system in both stereo and dual-zone configuration Flexible I/O ch.1 features an XLR/TRS input that accepts mic or line signals ch.2 features an XLR/TRS line input plus a stereo 1/8” input The output contains audio from both input channels Built-in Feedback Eliminator reduces squeals and out-of-control rumble Music Ducking mode automatically reduces the level of Ch 2 when Ch 1 receives a signal Front LED On/Off switch Universal Power Supply (100-240VAC) Standard pole mount M10 fly points for permanent install The monitor wedge provides an optimal angle for use as a floor monitor. Powered: Yes Channels:2-channel mixer LF Driver Size:15" high-performance woofer HF Driver Size:1" compression driver Total Power:1400W Inputs:2 x XLR-1/4" combo, 1 x 1/8" TRS Outputs:1 x 1/4" Bluetooth: Yes Wireless: Bluetooth Frequency Response:40Hz-20kHz Maximum Peak SPL:129dB SPL Software: Thump Connect 2 App Mounting Options: Pole Mount, Floor Wedge, M10 fly points Power Source: Standard IEC AC cable Weight: 35.1 lb / 15.9 kg Dimensions: 27 x 17.4 x 14 in / 686 x 442 x 356 mm Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-47% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Mackie Thump GO 8" Portable Battery-Powered Loudspeaker +Stand $399.99 $750.00

Mackie Thump GO 200-watt 8" 2-way Battery-powered portable loudspeaker +MR DJ stand Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 2-Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers the Ch 2 level when Ch 1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-59% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Mackie Thump GO 8" Portable Battery-Powered Loudspeaker +Stand + 2 Cable $419.99 $999.99

Mackie Thump GO 200-watt 8" 2-way Battery-powered portable loudspeaker +MR DJ stand and 2 MR DJ 6' 1/4' to 1/4' cable Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 2-Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers the Ch 2 level when Ch 1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

All Products (8911)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER