All Products (8993)

Mackie MR824 8" 2-Way Powered Studio Monitor (Single) The Mackie MR824 Studio Monitor is a powered 8" 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass response. The MR824 is equipped with matched amps and drivers for an optimized 85W Class-AB bi-amplified system. The speaker can also be optimized to your mixing environment with the adjustable acoustic space filters designed to maintain a flat response in typical placement configurations. Additionally, a high-frequency filter applies a boost or cut to compensate for particularly bright or dull sounding rooms. The MR824 has been designed with flexibility in mind, featuring XLR, TRS, and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the optional MRS10 studio subwoofer can be added for a more powerful, extended low end. General Features: Designed for superior mix translation and accuracy for professional results in any studio Equipped with Mackie’s proven logarithmic waveguide design Ultrawide dispersion for enhanced stereo imaging and listening sweet spot Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity 8” polypropylene woofer delivers responsive, dynamic low frequency response 85-watts of biamplified Class-AB amplification Frequency response: 35 Hz – 20 kHz Optimize MR monitors for your mixing environment Adjustable acoustic space filters maintain flat response in typical placement configurations HF filter applies boost or cut to compensate for particularly dull- or bright-sounding rooms Professional all-wood cabinet design built to last and look great in any studio Custom designed internal bracing adds stiffness for reduced distortion and enhanced low-frequency response Flexible inputs for simple connection to almost any audio source Acoustically optimized with sound-tightening acoustic absorption material Add the optional MRS10 studio subwoofer for powerful, deep low-frequency extension, well suited for electronic music, hip-hop and more ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie MR624 6.5" 2-Way Powered Studio Monitor (Single)   The Mackie MR624 Studio Monitor is a powered 6.5" 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass response. The MR624 is equipped with matched amps and drivers for an optimized 65W Class-AB biamplified system. The speakers can also be optimized to your mixing environment with the adjustable acoustic space filters designed to maintain a flat response in typical placement configurations. Additionally, a high-frequency filter applies a boost or cut to compensate for particularly bright- or dull-sounding rooms. The MR624 has been designed with flexibility in mind, featuring XLR, TRS, and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the MRS10 studio subwoofer can be added for a more powerful, extended low end. General Features: Designed for superior mix translation and accuracy for professional results in any studio Equipped with Mackie’s proven logarithmic waveguide design Ultrawide dispersion for enhanced stereo imaging and listening sweet spot Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity 6.5” polypropylene woofer delivers responsive, dynamic low frequency response 65-watts of biamplified Class-AB amplification Frequency Response: 38 Hz to 20 kHz Optimize MR monitors for your mixing environment Adjustable acoustic space filters maintain flat response in typical placement configurations HF filter applies boost or cut to compensate for particularly dull- or bright-sounding rooms Professional all-wood cabinet design built to last and look great in any studio Custom-designed internal bracing adds stiffness for reduced distortion and enhanced low-frequency response Flexible inputs for simple connection to almost any audio source Acoustically optimized with sound-tightening acoustic absorption material Add the optional MRS10 studio subwoofer for powerful, deep low-frequency extension, well suited for electronic music, hip-hop and more ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie MR524 5" 2-Way Powered Studio Monitor (Single)   The Mackie MR524 Studio Monitor is a powered 5" 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass response. The MR524 is equipped with matched amps and drivers for an optimized 50W Class-AB biamplified system. The speaker can also be optimized to your mixing environment with the adjustable acoustic space filters designed to maintain a flat response in typical placement configurations. Additionally, a high-frequency filter applies a boost or cut to compensate for particularly bright- or dull-sounding rooms. The MR524 has been designed with flexibility in mind, featuring XLR, TRS and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the MRS10 studio subwoofer can be added for a more powerful, extended low end. General Features: 5" Woofer and 1" Tweeter Matched Amps and Drivers 50W Class-AB Amplification Enhanced Waveguide System Frequency Response: 45 Hz to 20 kHz Max SPL (per Pair): 108 dB Acoustic Space: 0, -2, -4 dB High Frequency Filter: -2, 0, +2 dB Internal Acoustic Absorption Material ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR8S-XBT Creative Reference Series 8" Multimedia Subwoofer with Bluetooth and Volume Controller   Add deep bass, Bluetooth capability, and convenient desktop volume control to your studio monitoring setup with the Mackie CR8S-XBT Creative Reference Series 8" multimedia subwoofer. It features an all-wood cabinet with a custom-tuned bass port and a 200W amplifier driving an 8" polypropylene coated woofer. 1/4" TRS and RCA input and output connectors ensure simple connectivity with your monitors and audio interface, mixer, or soundcard. Utilize the subwoofer's built-in Bluetooth receiver to wirelessly stream music from your smartphone, tablet, or computer. The adjustable I/O levels, 40 to 180 Hz variable crossover, and switchable polarity let you optimize the CR8S-XBT's performance according to your preferences and the unique factors presented by your room and equipment. The included CRDV volume controller connects to the dedicated 1/4" CRDV input on the CR8S-XBT and provides separate level adjustments for the subwoofer and your monitors. General Features: 8" Polypropylene Coated Woofer 200W of Amplification Built-In Bluetooth Receiver Includes Desktop Volume Controller All-Wood Cabinet Custom-Tuned Bass Port 1/4" TRS and RCA I/O Connectors Adjustable Input and Output Levels 40 to 180 Hz Variable Crossover Switchable Polarity ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR8-XBT Creative Reference Series 8" Multimedia Monitors with Bluetooth (Pair)   The Mackie CR8-XBT is a pair of Creative Reference Series 8" multimedia monitors offering an affordable solution for powerful audio playback in home studios, production rooms, and gaming setups. With 160W of amplification driving 8" woofers and 0.75" tweeters, the CR8-XBT monitors deliver even more volume and bass than the smaller CR5-XBT. The pair consists of one passive speaker and one powered speaker that connects with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end and a specially designed waveguide for clarity and proper dispersion of high frequencies. With plenty of I/O provided, the CR8-XBT can accept either a wired connection from your audio interface or computer soundcard or a wireless stream via Bluetooth from your mobile device. Either way, your music can be pumped out to the drivers or your favorite headphones. General Features: For recording, mixing, sound design, gaming, and casual listening All-wood cabinet with a brushed-metal front panel Built-in Bluetooth receiver enables wireless music streaming from your smartphone, tablet, or Bluetooth-enabled computer 3.5mm, RCA, and 1/4" inputs accommodate balanced or unbalanced stereo line-level signal from your audio interface, mixer, soundcard, or mobile device Front-panel 3.5mm headphone port auto-defeats speaker output 160W of amplification drive the 8" polypropylene-coated woofers and 0.75" ferrofluid-cooled, silk-dome tweeters The speaker placement switch lets you choose which side to use for the on/off/volume control Includes a 3.5mm stereo RCA cable for connecting your computer to the speakers, a standard 3.5mm cable to plug in your smartphone, and a speaker cable to connect the left and right monitors Included monitor isolation pads minimize boomy bass buildup and provide up/down tilt control for more focused listening Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR5-XBT Creative Reference Series 5" Multimedia Monitors with Bluetooth (Pair) The Mackie CR5-XBT is a pair of Creative Reference Series 5" multimedia monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 80W of amplification driving 5" woofers and 0.75" tweeters, the CR5-XBT monitors deliver more volume and bass than the smaller CR3-XBT and CR4-XBT. The pair consists of one passive speaker and one powered speaker that connects with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end and a specially designed waveguide for clarity and proper dispersion of high frequencies. With plenty of I/O provided, the CR5-XBT can accept a wired connection from your audio interface, computer soundcard, non-Bluetooth music player, or a wireless stream via Bluetooth from your mobile device. Either way, your music can be pumped out to the drivers or your favorite headphones.  The CR5-XBT features a download for ProTools | First and The Musician's Collection plug-in package including 23 high-quality plug-ins with BBD Delay, Eleven Lite, the 304E EQ, and the 304C Compressor. General Features: For recording, mixing, sound design, gaming, and casual listening All-wood cabinet with a brushed-metal front panel Built-in Bluetooth receiver enables wireless music streaming from your smartphone, tablet, or Bluetooth-enabled computer 3.5mm, RCA, and 1/4" inputs accommodate balanced or unbalanced stereo line-level signal from your audio interface, mixer, soundcard, or mobile device Front-panel 3.5mm headphone port auto-defeats speaker output 80W of amplification drive the 5" polypropylene-coated woofers and 0.75" ferrofluid-cooled, silk-dome tweeters The speaker placement switch lets you choose which side to use for the on/off/volume control Includes a 3.5mm stereo RCA cable for connecting your computer to the speakers, a standard 3.5mm cable to plug in your smartphone, and a speaker cable to connect the left and right monitors Included monitor isolation pads minimize boomy bass buildup and provide up/down tilt control for more focused listening ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR5-X Creative Reference Series 5" Multimedia Monitors (Pair)   The Mackie CR5-X is a pair of Creative Reference Series 5" multimedia monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 80W of amplification driving 5" woofers and 0.75" tweeters, the CR5-X monitors deliver more volume and bass than the smaller CR3-X and CR4-X. The pair consists of one passive speaker and one powered speaker that connect with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end and a specially designed waveguide for clarity and proper dispersion of high frequencies. With plenty of I/O provided, the CR5-X can accept a feed from your audio interface, computer soundcard, or mobile device while pumping out your mix to the drivers or your favorite headphones. General Features: For recording, mixing, sound design, gaming, and casual listening All-wood cabinet with a brushed-metal front panel 3.5mm, RCA, and 1/4" inputs accommodate balanced or unbalanced stereo line-level signal from your audio interface, mixer, soundcard, or mobile device Front-panel 3.5mm headphone port auto-defeats speaker output 80W of amplification drive the 5" polypropylene-coated woofers and 0.75" ferrofluid-cooled, silk-dome tweeters Speaker placement switch lets you choose which side to use for the on/off/volume control Includes a 3.5mm to stereo RCA cable for connecting your computer to the speakers, a standard 3.5mm cable to plug in your smartphone, and a speaker cable to connect the left and right monitors Included monitor isolation pads minimize boomy bass buildup and provide up/down tilt control for more focused listening ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR4-XBT 4-inch Creative Reference Multimedia Studio Monitors with Bluetooth Bundle  CR Series Creative Reference Multimedia Monitors offer studio-quality sound with cosmetics that complement any desk whether you’re making music, creating content, or just relaxing to your favorite tunes. The sleek design of CR-X features a brushed metal panel and a distinct outline that stands out. Available in a vast range of sizes from 3” to 8” with a Bluetooth option plus an 8” subwoofer with Bluetooth, CR-X is the perfect match for your needs. Upgrade your listening experience with Mackie CR-X Creative Reference Multimedia Monitors. General Features: stream music from a smartphone or any other Bluetooth-enabled device Desktop monitor speakers with 4" drivers Convenient front-panel volume control and headphone output 4" Polypropylene-Coated Woofer HF Driver Size: 0.75" Tweeter Total Power: 50W Class AB All-Wood Cabinet Custom-Tuned Rear Port Specially Designed Waveguide Front-Panel Stereo Headphone Output Includes speaker cable, RCA-1/8" cable, and 1/8"-1/8" cable Power Configuration: Single Amp LF Driver Size: 4" Woofer LF Driver Type: Polypropylene-coated HF Driver Size:0.75" Tweeter HF Driver Type: Ferrofluid-cooled Silk-dome Frequency Response:70Hz-20kHz (-10dB) Crossover Frequency:3.0 kHz Maximum Peak SPL:100 dB SPL Input Types:1 x Dual RCA Stereo, 2 x 1/4" TRS, 1 x 1/8" Output Types: 1 x 1/8" (headphones), bare wire connectors +/- (connects pair) Enclosure Type: Rear Ported Enclosure Material: Solid MDF with Black Vinyl wrap Height:8.9" Width:6.1" Depth:8.3" Weight:10.1 lbs. What's in the CR4-XBT package? Desktop monitor speakers Speaker cable RCA to 1/8" cable 1/8" to 1/8" cable Quickstart guide CR4-X owner's Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR4-X Creative Reference Series 4" Multimedia Monitors (Pair) The Mackie CR4-X is a pair of Creative Reference Series 4" multimedia monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 50W of amplification driving 4" woofers and 0.75" tweeters, the CR4-X monitors work well whether you're creating content or casually enjoying some tunes. The pair consists of one passive speaker and one powered speaker that connect with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end and a specially designed waveguide for clarity and proper dispersion of high frequencies. With plenty of I/O provided, the CR4-X can accept a feed from your audio interface, computer soundcard, or mobile device while pumping out your mix to the drivers or your favorite headphones. General Features: For recording, mixing, sound design, gaming, and casual listening All-wood cabinet with a brushed-metal front panel 3.5mm, RCA, and 1/4" inputs accommodate balanced or unbalanced stereo line-level signal from your audio interface, mixer, soundcard, or mobile device Front-panel 3.5mm headphone port auto-defeats speaker output 50W of amplification drive the 4" polypropylene-coated woofers and 0.75" ferrofluid-cooled, silk-dome tweeters Speaker placement switch lets you choose which side to use for the on/off/volume control Includes a 3.5mm to stereo RCA cable for connecting your computer to the speakers, a standard 3.5mm cable to plug in your smartphone, and a speaker cable to connect the left and right monitors ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR3-XBT Creative Reference Series 3" Multimedia Monitors with Bluetooth (Pair, Green) Music producers, audio engineers, and DJs looking for high-quality Bluetooth-enabled studio monitors will be impressed with the green Mackie CR3-XBT, a pair of Creative Reference Series 3" multimedia monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 50W of amplification driving 3" woofers and 0.75" tweeters, the CR3-XBT monitors work well whether you're creating content or casually enjoying some tunes. The pair consists of one passive speaker and one powered speaker that connect with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end, and a specially designed waveguide for clarity and proper dispersion of high frequencies. With plenty of I/O provided, the CR3-XBT can accept a wired connection from your audio interface or computer soundcard, or a wireless stream via Bluetooth from your mobile device. Either way, your music can be pumped out to the drivers or your favorite headphones. General Features: For recording, mixing, sound design, gaming, and casual listening All-wood cabinet with a brushed-metal front panel Built-in Bluetooth receiver enables wireless music streaming from your smartphone, tablet, or Bluetooth-enabled computer RCA and 1/4" inputs accommodate balanced or unbalanced stereo line-level signals from your audio interface, mixer, soundcard, or mobile device Front-panel 3.5mm headphone port auto-defeats speaker output 50W of amplification drive the 3" polypropylene-coated woofers and 0.75" ferrofluid-cooled, silk-dome tweeters Speaker placement switch lets you choose which side to use for the on/off/volume control Includes a 3.5mm to stereo RCA cable for connecting your computer to the speakers and a speaker cable to connect the left and right monitors ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR3-X Creative Reference Series Powered 3" Multimedia Monitors (Pair, Limited-Edition White) Music producers, audio engineers, and DJs looking for high-quality studio monitors will be impressed with the limited-edition white Mackie CR3-X, a pair of Creative Reference Series 3" multimedia monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 50W of amplification driving 3" woofers and 0.75" tweeters, the CR3-X monitors work well for both creating content or casually enjoying some tunes. The pair consists of two powered speakers that connect with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end, and a specially designed waveguide for clarity and proper dispersion of high frequencies.With plenty of I/O provided, the CR3-X can accept a feed from your audio interface, computer soundcard, or mobile device, while pumping out your mix to the drivers or your favorite headphones. General Features: For recording, mixing, sound design, gaming, and casual listening All-wood cabinet with a brushed-metal front panel 3.5mm, RCA, and 1/4" inputs accommodate balanced or unbalanced stereo line-level signal from your audio interface, mixer, soundcard, or mobile device Front-panel 3.5mm headphone port auto-defeats speaker output 50W of amplification drives the 3" polypropylene-coated woofers and 0.75" ferrofluid-cooled silk-dome tweeters Speaker placement switch lets you choose which side to use for the on/off/volume control Includes a 3.5mm to stereo RCA cable for connecting your computer to the speakers, a standard 3.5mm cable to plug in your smartphone, and a speaker cable to connect the left and right monitors ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie SPM400 Adjustable Speaker Pole for DRM Series Subwoofers The Mackie SPM400 Speaker Pole allows you to pole-mount your Mackie DRM loudspeakers above a DRM18S or DRM18S-P subwoofer. General Features: Works with DRM18S and DRM18S-P Subwoofer For Raising DRM Loudspeakers ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.