All Microphones (241)

CAD Audio D27 SuperCardioid Dynamic Microphone with On/Off Switch The CADLive D27 is a supercardiod dynamic handheld microphone with a QuietTouch on/off switch and neodymium capsule. Superior gain before feedback and silent on/off switch make the D27 a perfect choice for vocal performance where the performer’s control of the mic signal is important. QuietTouch on/off switch Neodymium capsule design ensures a hot signal Durable all metal construction Pattern SuperCardioid Frequency Response 60Hz – 17kHz; Sensitivity -51 dBV (2.8mV @ 1Pa) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case + 7 On Stage Microphones Cables, 20 Feet CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads. D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone specifically designed and carefully equalized for kick drum capture and reinforcement. Designed for kick drum, excellent results are also obtained when used on floor toms, electric guitar, and electric bass cabinets. D19 PERCUSSION MICROPHONE: Specifically designed for the capture and reinforcement of snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement. D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone specifically designed for the capture and reinforcement of tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, excellent results are also obtained when used on most electrical and acoustical instruments. C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case + 7 Microphones Cables, 20 Feet CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads. D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone designed and carefully equalized for kick drum capture and reinforcement. It also produces excellent results on floor toms, electric guitars, and electric bass cabinets. D19 PERCUSSION MICROPHONE: Specifically designed to capture and reinforce snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement. D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone designed to capture and reinforce tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, it also obtains excellent results when used on most electrical and acoustical instruments. C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio CADLive D88 Large Diaphragm Supercardioid Dynamic Kick Drum Microphone, Black Cad is adding to its popular and critically acclaimed cadlive microphone line with the introduction of the muscular new D88 kick mic.the cadlive D88 is equipped with one of the largest capsules for a percussion mic. The True flex diaphragm is powered with a powerful neodymium magnet to provide a particularly hot signal engineered for today’s massive kick drum sounds. A dynamic Super cardioid mic with a frequency response of 20-17khz Maximum SPL of > 150dB with an impedance of 80 ohms Sensitivity of -65Dbv (mV) @ 1Pa Massive Capsule for massive kick drum sounds Power gap neodymium magnet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio D12 Dynamic Cardioid Kick Microphone Neodymium Cardioid Dynamic MicrophoneThe D12 is a cardioid neodymium dynamic microphone specifically designedfor bass drum and other low frequency sources. The D12’s wide dynamicrange and fast transient response produces an open, detailed sound withextra punch when miking kick drums, large percussive instruments, and bassguitar amplifiers. All metal housing with integrated mic clip The package width of the product is 16.0 inches The package height of the product is 16.0 inches Country of origin is China ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio Studio Pack GXL2200SP-2 with One GXL2200, VP1 & Two GXL1200 Stereo Studio PackIt contains one GXL2200 Cardioid Condenser, two GXL1200 Cardioid Condensers, and one EPF15A Pop Filter. Shock mount and mic clips are included. P48 (48V) phantom power is required. Perfect for home studio recording projects Includes shock mount and microphone clip 1 GXL2200 Cardioid Condenser Microphone 2 GXL1200 Cardioid Condenser Microphone 1 VP1 Pop Filter GXL2200SSP Stereo Studio Pack It is ideal for recording vocals and instruments, particularly for isolated tracks. The GXL2200SSP Stereo Studio Pack from CAD Audio contains one GXL2200 Cardioid Condenser, two GXL1200 Cardioid Condensers, and one EPF15A Pop Filter. The GXL mics are inspired cosmetically, mechanically, and electrically by early generations of European masters. Features include (but are not limited to) an internal hi-pass filter. An elastic shock mount and protective pouch are included. P48 (48V) phantom power is required. The CAD Audio GXL2200 condenser microphone is a thin conductive membrane stretched close to a stationary plate. High voltage is applied between the membrane and the plate. As the membrane vibrates, electrons move. These moving electrons are sensed as voltage. Silicon can strengthen (but not necessarily increase) this voltage. The cardioid polar pattern is ideal for recording vocals and instruments, particularly for isolated tracks, but it also works well for live applications. Use condenser mics to get a clear directional recording of studio vocals, voice-over work, choirs, acoustic instruments, strings, piano, and cymbals/overheads. The GXL2200SSP includes an elastic shock mount and a protective carrying pouch for easy transport and set-up. Includes Two GXL1200 Condenser Mics Point-source transduction, field-effect detection, and pure high voltage. The two included GXL1200 condenser mics capture your instrumentation with exacting detail. A mic clip and protective pouch are also included. About CAD Audio CAD Audio celebrates its 80-year heritage of world-class products designed to satisfy the Studio, Live, and Installed sound customer. CAD Audio sprung from its Conneaut Ohio roots and continues its operations in Solon, Ohio, delivering exceptional audio reproduction with the legendary performance and durability you expect. Recent introductions of the StagePass and GXL Wireless and the acclaimed Sessions series of headphones have established new categories of excellence for CAD Audio. Shock mount and mic clips are included. P48 (48V) phantom power is required. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio Studio Pack GXL2200SP with One GXL2200, VP1 & GXL1200 Stereo Studio PackIt contains one GXL2200 Cardioid Condenser, one GXL1200 Cardioid Condenser, and one EPF15A Pop Filter. Shock mount and mic clips are included. P48 (48V) phantom power is required. Perfect for home studio recording projects Includes shock mount and microphone clip 1 GXL2200 Cardioid Condenser Microphone 1 GXL1200 Cardioid Condenser Microphone 1 VP1 Pop Filter GXL2200SSP Stereo Studio Pack It is ideal for recording vocals and instruments, particularly for isolated tracks. The GXL2200SSP Stereo Studio Pack from CAD Audio contains one GXL2200 Cardioid Condenser, two GXL1200 Cardioid Condensers, and one EPF15A Pop Filter. The GXL mics are inspired cosmetically, mechanically, and electrically by early generations of European masters. Features include (but are not limited to) an internal hi-pass filter. An elastic shock mount and protective pouch are included. P48 (48V) phantom power is required. The CAD Audio GXL2200 condenser microphone is a thin conductive membrane stretched close to a stationary plate. High voltage is applied between the membrane and the plate. As the membrane vibrates, electrons move. These moving electrons are sensed as voltage. Silicon can strengthen (but not necessarily increase) this voltage. The cardioid polar pattern is ideal for recording vocals and instruments, particularly for isolated tracks, but it also works well for live applications. Use condenser mics to get a clear directional recording of studio vocals, voice-over work, choirs, acoustic instruments, strings, piano, and cymbals/overheads. The GXL2200SSP includes an elastic shock mount and a protective carrying pouch for easy transport and set-up. Point-source transduction, field-effect detection, and pure high voltage. The two included GXL1200 condenser mics capture your instrumentation with exacting detail. A mic clip and protective pouch are also included. About CAD Audio CAD Audio celebrates its 80-year heritage of world-class products designed to satisfy the Studio, Live, and Installed sound customer. CAD Audio sprung from its Conneaut Ohio roots and continues its operations in Solon, Ohio, delivering exceptional audio reproduction with the legendary performance and durability you expect. Recent introductions of the StagePass and GXL Wireless and the acclaimed Sessions series of headphones have established new categories of excellence for CAD Audio. Shock mount and mic clips are included. P48 (48V) phantom power is required. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio CAD GXL2200 Cardioid Condenser Microphone, Champagne Finish The CAD GXL2200 Condenser Microphone is a fantastic way to upgrade your studio or add to your mic locker. The GXL2200 is a large diameter, fixed cardioid pattern, condenser microphone designed to deliver high performance. High sensitivity and low distortion make the GLX2200 an ideal candidate for recording, broadcasting, or vocal and instrument sound reinforcement applications. The capsule in the GXL2200 features a 1-inch gold vapor-deposited diaphragm for consistent sound quality, year after year. The GXL2200 has a shock mount that will fit any standard 5/8inch x 27-threaded microphone stand. The GXL2200 is audio tested and inspected under the direction of CAD Professional Microphones, offering exceptional value. Requires 48-volt phantom power. Suggested Applications Studio Vocals Voice-over Choir Acoustic Instrument Strings, Piano Cymbals/Overheads CAD Quality The GXL2200 microphones are audio tested and inspected under the direction of CAD Professional Microphones, offering exceptional value. General Features: GXL2200 Cardioid Condenser Microphone It is ideal for recording both vocals and instruments. The GXL2200 condenser mic from CAD Audio is inspired cosmetically, mechanically, and electrically by early generations of European masters. Features include (but are not limited to) an internal hi-pass filter. An elastic shock mount and protective pouch are included. P48 (48V) phantom power is required. Condenser-Style Microphone for Instrument Recording The CAD Audio GXL2200 condenser microphone is a thin conductive membrane stretched close to a stationary plate. High voltage is applied between the membrane and the plate. As the membrane vibrates, electrons move. These moving electrons are sensed as voltage. Silicon can strengthen (but not necessarily increase) this voltage. The cardioid polar pattern is ideal for recording vocals and instruments, particularly for isolated tracks, but it also works well for live applications. Use condenser mics to get a clear directional recording of studio vocals, voice-over work, choirs, acoustic instruments, strings, piano, and cymbals/overheads. Included Shock Mount and Carrying Pouch The GXL2200 has an elastic shock mount and a protective carrying pouch for easy transport and setup. (A mic stand is not included.) About CAD Audio CAD Audio celebrates its 80-year heritage of world-class products designed to satisfy the Studio, Live, and Installed sound customer. CAD Audio sprung from its Conneaut Ohio roots and continues its operations in Solon, Ohio, delivering exceptional audio reproduction with the legendary performance and durability you expect. Recent introductions of the StagePass and GXL Wireless and the acclaimed Sessions series of headphones have established new categories of excellence for CAD Audio. Polar Pattern: Cardioid Frequency Response: 30Hz to 20KHz Sensitivity: -36dBV (16mV) at 1 Pa Impedance: 75 ohms Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio CAD-GXL1200 Cardioid Condenser Microphone The GXL1200 cardioid Condenser microphone provides transparent sound reproduction. Its transformerless design allows low distortion and optimum low-end frequency response.  The GXL1200's size, accurate sound reproduction, and high SPL capability make this an excellent choice for miking overheads, high hats, cymbals, woodwinds, and stringed instruments. CAD Audio celebrates its 80-year heritage of world-class products designed to satisfy the Studio, Live, and Installed sound customer. CAD Audio sprung from its Conneaut Ohio roots and continues its operations in Solon, Ohio, delivering exceptional audio reproduction with the legendary performance and durability you expect. Recent introductions of the StagePass and GXL Wireless and the acclaimed Sessions series of headphones have established new categories of excellence for CAD Audio. General Features:  Generating Element Externally Biased Condenser. Polar Pattern Unidirectional Cardioid. Frequency Response 30 Hz 20 kHz. Sensitivity 56dB 0dB1VuBar 1kHz. Impedance Low Less than 200 Ohms. Equivalent Noise Level 14dB A-weighted. Power P24V or P48V Phantom Power. Connector 3 pin XLR Item Includes. Clip windscreen and vinyl pouch included Warranty. 5 Years Polar Pattern: Unidirectional (Cardioid) Frequency Response: 30 Hz - 20 kHz Sensitivity: -56dB 0dB=1V/uBar @ 1kHz Impedance: Low (Less than 200 Ohms) Packaged in a small, rugged, all-metal housing It provides a transparent sound reproduction An excellent choice for miking overheads, high hats, cymbals, woodwinds, and stringed instruments Frequency Response: 30 Hz - 20 kHz; Sensitivity: -56dB 0dB=1V/uBar @ 1kHz Impedance: Low (Less than 200 Ohms); Sensitivity: -56dB 0dB=1V/uBar @ 1kHz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio CAD-GXL1200 Cardioid Condenser Microphone The GXL1200 cardioid Condenser microphone provides transparent sound reproduction. Its transformerless design allows low distortion and optimum low-end frequency response.  The GXL1200's size, accurate sound reproduction, and high SPL capability make this an excellent choice for miking overheads, high hats, cymbals, woodwinds, and stringed instruments. CAD Audio celebrates its 80-year heritage of world-class products designed to satisfy the Studio, Live, and Installed sound customer. CAD Audio sprung from its Conneaut Ohio roots and continues its operations in Solon, Ohio, delivering exceptional audio reproduction with the legendary performance and durability you expect. Recent introductions of the StagePass and GXL Wireless and the acclaimed Sessions series of headphones have established new categories of excellence for CAD Audio. General Features:  Generating Element Externally Biased Condenser. Polar Pattern Unidirectional Cardioid. Frequency Response 30 Hz 20 kHz. Sensitivity 56dB 0dB1VuBar 1kHz. Impedance Low Less than 200 Ohms. Equivalent Noise Level 14dB A-weighted. Power P24V or P48V Phantom Power. Connector 3 pin XLR Item Includes. Clip windscreen and vinyl pouch included Warranty. 5 Years Polar Pattern: Unidirectional (Cardioid) Frequency Response: 30 Hz - 20 kHz Sensitivity: -56dB 0dB=1V/uBar @ 1kHz Impedance: Low (Less than 200 Ohms) Packaged in a small, rugged, all-metal housing It provides a transparent sound reproduction An excellent choice for miking overheads, high hats, cymbals, woodwinds, and stringed instruments Frequency Response: 30 Hz - 20 kHz; Sensitivity: -56dB 0dB=1V/uBar @ 1kHz Impedance: Low (Less than 200 Ohms); Sensitivity: -56dB 0dB=1V/uBar @ 1kHz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio GXL1800SP Studio Pack with GXL1800 Side Address & GLX800 Small Diaphragm Mic - Perfect for Studio, Podcasting & Streaming The GX1800SP Studio Pack contains the GXL1800 and GXL800. The GXL1800 Large Format Side Address Microphone captures your performance with a smooth and articulate profile. The GXL1800's high sensitivity allows for distance miking techniques and, combined with a well-behaved cardioid polar pattern, helps to eliminate off-axis environmental noise. The GXL800 small diaphragm condenser delivers class-leading transient response while supplying a true representation of voice or instrument. Includes studio-grade shock mount, mic clip, 2 XLR cables, and foam windscreen. High-sensitivity studio condenser capsule Class-leading transient response (GXL800) Highly effective studio-grade isolation shock mount Includes studio shock mount, tripod stand, XLR cable, and foam windscreen ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio GXL800 Small Diaphragm Cardioid Condenser Pack (GXL800) HEAVY-DUTY: Designed with a cardioid pattern that helps avoid unwanted background noise DEPENDABLE: Features premium articulation for a brilliant, class-leading response SUSTAINABLE: Showcases a highly efficient response that offers an accurate representation of voice and instrument HOMEGROWN: Engineered and built in the USA to exacting standards by industry artisans ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio GXL1800 Large Format Side Address Condenser Microphone- Perfect for Studio, Podcasting & Streaming, Black The CAD Audio Large Format Side Address Studio Condenser Microphone captures your performance with a smooth and articulate profile. The GXL1800's high sensitivity allows for distance miking techniques and combined with a well behaved cardioid polar pattern, helps to eliminate off axis environmental noise. Includes studio grade shock mount, tripod stand, XLR cable and foam windscreen. High sensitivity studio condenser capsule Highly effective studio grade isolation shock mount Cardioid pattern resists room noise Includes studio shock mount, tripod stand, XLR cable and foam windscreen ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD AS34 Acousti-Shield Stand Mounted Acoustic Enclosure The Acousti-Shield AS34 was developed as an effective accessory for the audio recording professional. When effectively utilized, it can substantially reduce unwanted reflections, echo flutter and unwanted environmental acoustic interference. A trouble-free design results in an easy to use, highly flexible device, while not sacrificing stand mounted stability. The Acousti-Shield AS34 is constructed from high-quality perforated metal and outfitted with 35mm high density micro cell acoustic foam. The Acousti-Shield AS34 is supplied with mounting hardware to adapt to most microphones - for easy, flexible placement. The Acousti-Shield AS34 is an essential tool for enhanced performance and a vital accessory for the audio recording professional. The Acousti-Shield AS34 reduces reflections, echo and attenuates unwanted environmental acoustic interference. An innovative advanced mounting design allows for maximum positioning stability even when using an economy mic stand. An effective tool for recording audio for video, voiceovers or any audio recording project. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio AS10 Acousti-Shield Desktop or Stand Mounted Acoustic Enclosure The CAD Audio Acousti-Shield AS10 is a miniature desktop or stand-mounted acoustical shield constructed from high quality 12-gauge perforated metal with 38mm high density acoustic foam. SUSTAINABLE: Created with 12 AWG perforated metal and an extremely dense acoustic foam DEPENDABLE: Constructed with a high-quality design that produces a dry recording environment HEAVY-DUTY: The stand-mounted acoustic enclosure is the perfect desktop microphone isolation system to reduce unwanted background interference The adjustable clamp fits securely to most microphones - for easy, flexible placement ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.