CAD Audio
CAD Audio Studio Pack GXL2200SP Condenser Mic Recording Pack
$159.99
$299.99
CAD Audio Studio Pack GXL2200SP with One GXL2200, VP1 & GXL1200
Stereo Studio PackIt contains one GXL2200 Cardioid Condenser, one GXL1200 Cardioid Condenser, and one EPF15A Pop Filter. Shock mount and mic clips are included. P48 (48V) phantom power is required.
Perfect for home studio recording projects
Includes shock mount and microphone clip
1 GXL2200 Cardioid Condenser Microphone
1 GXL1200 Cardioid Condenser Microphone
1 VP1 Pop Filter
GXL2200SSP Stereo Studio Pack
It is ideal for recording vocals and instruments, particularly for isolated tracks.
The GXL2200SSP Stereo Studio Pack from CAD Audio contains one GXL2200 Cardioid Condenser, two GXL1200 Cardioid Condensers, and one EPF15A Pop Filter. The GXL mics are inspired cosmetically, mechanically, and electrically by early generations of European masters. Features include (but are not limited to) an internal hi-pass filter. An elastic shock mount and protective pouch are included. P48 (48V) phantom power is required.
The CAD Audio GXL2200 condenser microphone is a thin conductive membrane stretched close to a stationary plate. High voltage is applied between the membrane and the plate. As the membrane vibrates, electrons move. These moving electrons are sensed as voltage. Silicon can strengthen (but not necessarily increase) this voltage.
The cardioid polar pattern is ideal for recording vocals and instruments, particularly for isolated tracks, but it also works well for live applications. Use condenser mics to get a clear directional recording of studio vocals, voice-over work, choirs, acoustic instruments, strings, piano, and cymbals/overheads.
The GXL2200SSP includes an elastic shock mount and a protective carrying pouch for easy transport and set-up.
Point-source transduction, field-effect detection, and pure high voltage. The two included GXL1200 condenser mics capture your instrumentation with exacting detail. A mic clip and protective pouch are also included.
About CAD Audio
CAD Audio celebrates its 80-year heritage of world-class products designed to satisfy the Studio, Live, and Installed sound customer. CAD Audio sprung from its Conneaut Ohio roots and continues its operations in Solon, Ohio, delivering exceptional audio reproduction with the legendary performance and durability you expect. Recent introductions of the StagePass and GXL Wireless and the acclaimed Sessions series of headphones have established new categories of excellence for CAD Audio.
Shock mount and mic clips are included.
P48 (48V) phantom power is required.
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
CAD Audio
CAD Audio Stage7 7-Piece Drum Instrument Mic Carrying Case + 3 Mic Stands + 7 XLR Mic Cables
$339.99
$500.00
Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case + 2 Mic Stands & 1 Kick Stands + 7 XLR Mic Cables
CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads.
D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone designed and carefully equalized for kick drum capture and reinforcement. It also produces excellent results on floor toms, electric guitars, and electric bass cabinets.
D19 PERCUSSION MICROPHONE: Specifically designed to capture and reinforce snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement.
D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone designed to capture and reinforce tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, it also obtains excellent results when used on most electrical and acoustic instruments.
C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments.
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
CAD Audio
CAD Audio Stage7 7-Piece Drum Instrument Mic Carrying Case + 2 Mic Stands & 2 Kick Stands + 7 XLR Mic Cables
$349.99
$500.00
Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case + 2 Mic Stands & 2 Kick Stands + 7 XLR Mic Cables
CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads.
D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone designed and carefully equalized for kick drum capture and reinforcement. It also produces excellent results on floor toms, electric guitars, and electric bass cabinets.
D19 PERCUSSION MICROPHONE: Specifically designed to capture and reinforce snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement.
D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone designed to capture and reinforce tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, it also obtains excellent results when used on most electrical and acoustic instruments.
C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments.
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
CAD Audio
Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack Vinyl Carrying Case
$199.99
$349.99
Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case
CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads.
D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone designed and carefully equalized for kick drum capture and reinforcement. It also produces excellent results on floor toms, electric guitars, and electric bass cabinets.
D19 PERCUSSION MICROPHONE: Specifically designed to capture and reinforce snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement.
D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone designed to capture and reinforce tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, it also obtains excellent results when used on most electrical and acoustic instruments.
C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments.
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Xvive
Xvive U3 XLR Plug-on Wireless System
$199.99
$399.99
Xvive U3 Microphone Wireless System Compact Plug-on Wireless Transmitter for Handheld Microphones, 2.4GHz
General Features:
Plug-on wireless adapter for XLR dynamic microphones
Operates in 2.4GHz wireless band
Less than 5ms of latency for distraction-free performance
Wide 20Hz–20kHz frequency range
Rechargeable batteries with up to 5 hours of battery life
Up to 90 feet of wireless range (dependent on environmental factors)
High-quality 24-bit/48kHz audio
Impressive dynamic range (110dB) and signal-to-noise ratio (110dB)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Xvive
Xvive U2 Digital Rechargeable Wireless System for Guitars Carbon Fiber
$154.90
$219.99
Xvive U2 Digital Rechargeable Wireless System for Guitars -Carbon Fiber
The Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality and a simple setup, making it extremely reliable for any gigging musician. It delivers a full 20Hz-20kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency.
General Features:
2.4GHz digital wireless signal transmission with 24-bit/48KHz uncompressed conversion
70' range for outstanding freedom of movement onstage or out in the crowd
ABS plastic-housed transmitter and receiver are built to last
The compact form factor with a swiveling plug is convenient and inconspicuous; no bodypack or wires
Easy to set up and use; included USB split cable recharges both batteries at once
Four channels to choose from
Well-priced to fit almost any budget
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Xvive
Xvive U3 Microphone Wireless System Compact 2.4Ghz
$199.99
$399.99
Xvive U3 Microphone Wireless System Compact 2.4Ghz
General Features:
Plug-on wireless adapter for XLR dynamic microphones
Operates in 2.4GHz wireless band
Less than 5ms of latency for distraction-free performance
Wide 20Hz–20kHz frequency range
Rechargeable batteries with up to 5 hours of battery life
Up to 90 feet of wireless range (dependent on environmental factors)
High-quality 24-bit/48kHz audio
Impressive dynamic range (110dB) and signal-to-noise ratio (110dB)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Neumann
Neumann POPSCREEN PS 20 A
$119.00
Neumann POPSCREEN PS 20 A
The Pop Screen PS 20 A is designed to suppress so-called pop noise, such as "p" or "t" sounds. It consists of a round, thin frame covered with black gauze on both sides, providing excellent noise suppression.
General Features:
Frame Diameter: 20 cm
Gooseneck Length: Approximately 30 cm (12")
Mounting Type: Clamp with knurled screw for attachment to microphone stands
Material: Thin frame covered with black gauze
What's in the PS 20 A package:
Pop Screen PS 20 A
Gooseneck
Clamp with knurled screw
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.gov
Neumann
Neumann POPSCREEN PS 15
$119.00
$149.99
Neumann POPSCREEN PS 15
The Popscreen PS 15 is a pop screen designed to suppress so-called pop noise, such as "p" or "t" sounds. It consists of a round, thin frame covered with black gauze on both sides, providing excellent noise suppression.
General Features:
Pop Screen Type: Round, thin frame with black gauze
Gooseneck Length: Approximately 30 cm (12")
Mounting: Attaches to microphone stands with a clamp and knurled screw
Frame Diameter: 13 cm
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.gov
Neumann
Neumann EA 2124 Shock Mount
$269.00
Neumann Shock Mount EA 2124 A mt
The EA 2124 A mt Shock Mount is designed to accommodate microphones with diameters ranging from 21 to 24 mm. It features a swivel mount with a 5/8"-27 female thread and includes a thread adapter for connecting to 1/2" and 3/8" stands, providing versatile mounting options for your microphone.
General Features:
Compatibility: Designed to accept microphones with diameters from 21 to 24 mm
Mounting Type: Swivel mount
Thread Adapter: Includes adapter for 1/2" and 3/8" stands
What's in the EA 2124 A mt package:
Shock Mount EA 2124 A mt
Thread adapter
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.gov
Neumann
Neumann EA 170 Shock Mount
$449.00
Neumann Shock Mount EA 170
The Shock Mount EA 170 is designed for use with various microphones. It features a swivel mount with a 5/8"-27 female thread and includes a thread adapter for connecting to 1/2" and 3/8" stands, providing versatile mounting options for your microphone.
General Features:
Compatibility: Designed for use with various microphones
Mounting Type: Swivel mount
Thread Adapter: Includes adapter for 1/2" and 3/8" stands
What's in the EA 170 package:
Shock Mount EA 170
Thread adapter
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.gov
Neumann
Neumann EA 89 Shock Mount
$369.00
$450.00
Neumann Shock Mount EA 89 A
The Shock Mount EA 89 A features a swivel mount with a 5/8"-27 female thread and includes a thread adapter for connecting to 1/2" and 3/8" stands, providing versatile mounting options for your microphone.
General Features:
Compatibility: Designed for use with Neumann U 67 and U 87 microphones
Mounting Type: Swivel mount
Thread Adapter: Includes adapter for 1/2" and 3/8" stands
What's in the EA 89 A package:
Shock Mount EA 89 A
Thread adapter
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.gov
Neumann
Neumann EA 87 Shock Mount
$369.00
Neumann Shock Mount EA 87
The Shock Mount EA 87 features a swivel mount with a 5/8"-27 female thread, along with a thread adapter for connecting to 1/2" and 3/8" studs, providing versatile mounting options for your microphone.
General Features:
Compatibility: Designed for use with Neumann U 67 and U 87 microphones
Mounting Type: Swivel mount
Thread Adapter: Includes adapter for 1/2" and 3/8" stands
What's in the EA 87 package:
Shock Mount EA 87
Thread adapter
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.gov
Neumann
Neumann EA 4 Shock Mount
$219.00
Neumann Shock Mount EA 4
The EA 4 Shock Mount features a swivel mount with a 5/8"-27 female thread and includes a thread adapter for connecting to 1/2" and 3/8" stands, providing versatile mounting options for your microphone.
General Features:
Compatibility: Designed for use with Neumann U 67 and U 87 microphones
Mounting Type: Swivel mount
Thread Adapter: Includes adapter for 1/2" and 3/8" stands
What's in the EA 4 package:
Shock Mount EA 4
Thread adapter
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.gov
Neumann
Neumann EA 2 Shock Mount
$369.00
$450.00
Neumann Shock Mount EA 2
The Shock Mount EA 2 features a swivel mount with a 5/8"-27 female thread and includes a thread adapter for connecting to 1/2" and 3/8" stands, providing versatile mounting options for your microphone.
General Features:
Mounting Type: Swivel mount
Thread Adapter: Includes adapter for 1/2" and 3/8" stands
What's in the EA 2 package:
Shock Mount EA 2
Thread adapter
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.gov