All Car Subwoofers (601)

2 Cerwin Vega XED12V4 12" 1000 Watts 4 Ohm SVC XED Series Subwoofer Universal 12" XED Mobile Series 1000W 4-ohm SVC Subwoofer by Cerwin-Vega. Feel the bass with these premium-quality subwoofers from Cerwin-Vega, designed and manufactured to deliver the decibels. Constructed from the highest-quality materials and with the utmost attention to every tiny detail, they will provide maximum performance for years to come. General Features: 12" Single 4-ohm Xtreme-Energy Design Subwoofer Parabolic Poly Cone Single Stitched High Roll Surround Vented Pole Piece/Basket for Cooler Voice Coil Temperatures Bumped Back Plate for Maximum Excursion Signature Cerwin-Vega Bass Peak Power Handling: 1000W RMS Power Handling: 150W Impedance: 2 Ohms Voice Coil: Single Voice Coil Size: 2" Mounting Diameter: 10.82" Mounting Depth: 5.25" Sensitivity: 85.5dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-TSUB-TYA 10” Subwoofer & Amplifier Upgrade Kit for 2020-2025 Tesla Model Y & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Boost Your Bass – Get more bass without compromising your usable space. The PSS-TSLA-TYA directly replaces the factory Tesla 160W 8” subwoofer in the rear trunk panel with a powerful, 200W 10” sealed subwoofer without cutting or modification. Paired with the ultra-efficient KTA-200M, this system delivers a dramatic increase in output and low-end clarity, giving your Tesla a noticeably more powerful and immersive audio experience.Ultra-Efficient Power - Using Alpine’s proprietary amplifier technology, Dynamic Peak Power (DPP), the KTA-200M intelligently doubles power during dynamic musical passages for ultimate efficiency, with less than a mile of range at full volume. The lightweight yet durable hybrid carbon fiber cone material reproduces precision bass without adding additional weight to your Tesla.General Features:• Designed for 2020–2025 Tesla Model Y• Direct-fit, sealed 10” subwoofer enclosure - replaces factory subwoofer• Includes Alpine KTA-200M Mono Amplifier• Includes plug-and-play power harness & integration module• Hybrid carbon fiber cone material for precision bass• Alpine H.A.M.R. surround technology for extended excursion• Stealth install retains OEM appearance and cargo space• System tuned specifically for the Tesla Model 3 cabin• No cutting or vehicle modification required• Retains full OEM function• Sound damping recommended (sold separately)TECH SPECS:• Vehicle Compatibility: 2020–2025 Tesla Model Y• Subwoofer Size: 10”• Power Handling: 200W RMS / 500W Peak• Frequency Response: 25Hz–300Hz• Cone Material: Hybrid Carbon Fiber• Surround Technology: Alpine H.A.M.R.• Amplifier: Alpine KTA-200M Mono Amplifier• Amplifier Integration: Includes LOC module & vehicle-specific harnesses• OEM Function: Fully retainedWHAT’S IN THE BOX:• Custom-fit 10” Sealed Subwoofer Enclosure• Alpine KTA-200M Mono Amplifier• Plug-and-Play Integration Harness• Line Output Converter Module• Power Harness• Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-TSUB-T3A 10” Subwoofer & Amplifier Upgrade Kit for 2017-2023 Tesla Model 3 & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Get ludicrous bass performance in your Tesla! The PSS-TSLA-T3A is a 10” sealed, pre-loaded subwoofer & power pack amplifier kit designed for plug-and-play performance for the 2017-2023 Tesla Model 3 with factory-equipped premium sound systemBoost Your Bass – Get more bass without compromising your usable space. The PSS-TSLA-T3A directly replaces the factory Tesla 160W 8” subwoofer in the rear trunk panel with a powerful 200W 10” sealed subwoofer, without cutting or modifying. Paired with the ultra-efficient KTA-200M, this system delivers a dramatic increase in output and low-end clarity, giving your Tesla a noticeably more powerful and immersive audio experience.General Features:• Designed for 2017–2023 Tesla Model 3 Premium• Direct-fit, sealed 10” subwoofer enclosure - replaces factory subwoofer in Premium Sound-equipped vehicles• Not compatible with Tesla Base Audio system• Includes Alpine KTA-200M Mono Amplifier• Includes plug-and-play power harness and integration module• Hybrid carbon fiber cone material for precision bass• Alpine H.A.M.R. surround technology for extended excursion• Stealth install retains OEM appearance and cargo space• System tuned specifically for the Tesla Model 3 cabin• No cutting or vehicle modification required• Retains full OEM function• Sound damping recommended (sold separately)TECH SPECS:• Vehicle Compatibility: 2017–2023 Tesla Model 3 with OEM Premium Audio System• Subwoofer Size: 10”• Power Handling: 200W RMS / 500W Peak• Frequency Response: 25Hz – 300Hz• Cone Material: Hybrid Carbon Fiber• Surround Technology: Alpine H.A.M.R.• Amplifier: Alpine KTA-200M Mono Amplifier• Amplifier Integration: Includes LOC module & vehicle-specific harnesses• OEM Function: Fully retainedWHAT’S IN THE BOX:• Custom-fit 10” Sealed Subwoofer Enclosure• Alpine KTA-200M Mono Amplifier• Plug-and-Play Integration Harness• Line Output Converter Module• Power Harness• Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB10 Single 10” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With an ultra-shallow enclosure design and powerful sound output, the 10” S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 10” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB10 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, enables better motor control, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 10" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 10” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 18.5"W x 4.5"H x 12.5"D What's in the Box:Sealed Cabinet with (1) 10” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration information TECH SPECS:• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)• Power Handling: 300W RMS• X-Max: 11mm 1-Way Linear• Nominal Impedance: 2Ω• Frequency Response: 35Hz - 200Hz• Copper Voice Coil: 2”• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB12 Single 12” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 12” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB12 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine's Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 12" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 12” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 22.25"W x 5.25"H x 13.125"D What's in the Box:Sealed Cabinet with (1) 12” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration informationTECH SPECS:Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)Power Handling: 300W RMSFrequency Response: 30Hz-200HzX-Max:11mm 1-Way LinearNominal Impedance: 2ΩCopper Voice Coil: 2” (50.0mm)Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-DB8V-TRK Dual 8” Alpine Halo S-Series Preloaded Truck Subwoofer Enclosure with ProLink™ General Features: • Unique Alpine Halo Design with ProLink™• Deep Bass Output• Great Low Frequency Extension• Side-Firing Cabin Loading Ports• Expandable width from 40” – 51” allows for compact, under-the-rear-seat installation in many full size trucks including: 2018+ RAM 1500 (Crew Cab), 2015+ Ford F-150 (Crew Cab), 2018+ GMC Sierra / Chevrolet Silverado (Crew Cab), 2020+ Jeep Gladiator and many other vehicle applications• Rubber, modular foot design accommodates trucks with uneven under-seat areas• Integrated amplifier tray for hideaway amp installation• Dimensions: 40” - 51”(Adjustable-W) x 8-3/4”(H) x 13-3/4”(D)• Dual 4Ω Subwoofers Wired in Parallel for a 2Ω Load• Frequency Response: 35Hz-215Hz• Vented Tuning Frequency: 36Hz• Sensitivity: 84dB• Power Handling: 600W RMS (300W x 2)• Compatible with S-A60M / S2-A60M & OPTIM8® (PXE-C80-88) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDZ-W10 2400W Peak (800W RMS) 10" Status Series Dual 4-ohm Car Subwoofer, Grille incl. & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Experience superior bass with the Alpine Status 10” Subwoofer. Expertly engineered for unparalleled sound quality that transforms every drive into a live concert performance.SUPERIOR BASS PERFORMANCEFeaturing the revolutionary Alpine HAMR (High Amplitude Multi-Roll) Surround technology, this subwoofer ensures maximum excursion (20mm Linear Excursion) and performance without compromising on sound quality. The carbon fiber dust cap and pulp-mica cone body are meticulously crafted to deliver durability and crystal-clear bass, even at high volumes.POWER & PRECISIONPower through your tracks with the robust 800W RMS (2400W peak) power handling. Coupled with triple-stacked high-power strontium ferrite magnets, this subwoofer ensures impeccable control and responsiveness, delivering deep, resonating bass for a truly immersive listening experience.SLEEK DESIGN, LASTING DURABILITYEngineered with a cast aluminum frame and premium aluminum trim ring, every detail is crafted to merge style with endurance. The addition of an open-mesh protective grille not only enhances its durability but also ensures your subwoofer remains safeguarded without compromising its appearance.THE ALPINE STATUS DIFFERENCEJoin the elite group of audio enthusiasts who settle for nothing but the best. Whether it's the advanced engineering ensuring consistent, reliable performance, or the sleek design that enhances your car's interior, the Alpine Status subwoofer allows your passion for pure sound to be fulfilled. General Features: High Amplitude Multi-Roll: (HAMR) Surround: (US Pat #8,208,677) Carbon Fiber: Dust Cap Pulp-Mica: Cone Body Dual Progressive: Spiders With Integrated: Tinsel Leads Cast Aluminum: Frame Copper Shorting Cap With': Integrated Radial Heat Sink Integrated Aluminum: Shorting Sleeve Compound Radius Curve: Extended Pole Geometry: (US Pat #6,639,993) Open Mesh Style: Protective Grille Premium Aluminum: Trim Ring 8AWG Insert Terminals: With Series/Parallel: Jumper Plugs 65mm Voice Coil on: Aluminum Former Triple-Stacked High Power: Strontium Ferrite Magnets Airflow Optimized: Dual Flare Pole Vent Specifications: • Size: 10" • Dimensions: 10-7/8" x 10-7/8" x 9-1/4" • Mounting Depth: 7-7/16" • Frequency Response: 24Hz - 200Hz • Power Range: 400W - 800W RMS • Power Handling: 800W RMS/2400W Peak • Magnet Weight: 174 oz (x3) • Voice Coil Diameter: 65.5 mm (2.6") BOX SPECS:Sealed Box Range: • Net Internal Volume: 0.5 - 1.5 ft³ Recommended Sealed Box: • External Dimensions: 13" x 16" x 11.5" • Gross Internal Volume: 0.97 ft³ • Net Internal Volume: 0.85 ft³ • F3, Qtc: 32Hz, 0.97 Vented Box Range: • Net Internal Volume: 1.0 - 1.75 ft³ • Tuning: 32-37HZ Recommended Vented Box: • External Dimensions: 13.25" x 23.5" x 13.25" • Gross Internal Volume: 1.76 ft³ • Vent Area (W x H): 15 in² (3.75” x 4”) • Vent Length: 18" • Vent Displacement: 0.21 ft³ • Net Internal Volume (Vb): 1.43 ft³ • F3, Ripple, Fb: 26Hz, 8.4 dB, 35Hz THIELE-SMALL PARAMETERS • Sensitivity (1W/1m): 82.2 dB • DC Resistance: 6.36Ω • Inductance: 36.3 mH • Free Air Resonance: 33Hz • Equivalent Stiffness: 15.24 L • Mechanical Q: 5.43 • Electrical Q: 0.77 • Total Q: 0.68 • Cone Area: 305 cm² • Linear Excursion: 20 mm • Mechanical Travel: 82 mm Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDZ-W12 2400W Peak (800W RMS) 12" Status Series Dual 4-ohm Car Subwoofer, Grille incl. & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Experience superior bass with the Alpine Status 12” Subwoofer. Expertly engineered for unparalleled sound quality that transforms every drive into a live concert performance.SUPERIOR BASS PERFORMANCEFeaturing the revolutionary Alpine HAMR (High Amplitude Multi-Roll) Surround technology, this subwoofer ensures maximum excursion (20mm Linear Excursion) and performance without compromising on sound quality. The carbon fiber dust cap and pulp-mica cone body are meticulously crafted to deliver durability and crystal-clear bass, even at high volumes.POWER & PRECISIONPower through your tracks with the robust 800W RMS (2400W peak) power handling. Coupled with triple-stacked high-power strontium ferrite magnets, this subwoofer ensures impeccable control and responsiveness, delivering deep, resonating bass for a truly immersive listening experience.SLEEK DESIGN, LASTING DURABILITYEngineered with a cast aluminum frame and premium aluminum trim ring, every detail is crafted to merge style with endurance. The addition of an open-mesh protective grille not only enhances its durability but also ensures your subwoofer remains safeguarded without compromising its appearance.THE ALPINE STATUS DIFFERENCEJoin the elite group of audio enthusiasts who settle for nothing but the best. Whether it's the advanced engineering ensuring consistent, reliable performance, or the sleek design that enhances your car's interior, the Alpine Status subwoofer allows your passion for pure sound to be fulfilled. General Features: High Amplitude Multi-Roll: (HAMR) Surround: (US Pat #8,208,677) Carbon Fiber: Dust Cap Pulp-Mica: Cone Body Dual Progressive: Spiders With Integrated: Tinsel Leads Cast Aluminum: Frame Copper Shorting Cap With': Integrated Radial Heat Sink Integrated Aluminum: Shorting Sleeve Compound Radius Curve: Extended Pole Geometry: (US Pat #6,639,993) Open Mesh Style: Protective Grille Premium Aluminum: Trim Ring 8AWG Insert Terminals: With Series/Parallel: Jumper Plugs 65mm Voice Coil on: Aluminum Former Triple-Stacked High Power: Strontium Ferrite Magnets Airflow Optimized: Dual Flare Pole Vent Specifications: Size: 12" Dimensions: 12-7/8" x 12-7/8" x 9-1/4" Mounting Depth: 7-3/8" Frequency Response: 24Hz - 200Hz Power Range: 400W - 800W RMS Power Handling: 800W RMS/2400W Peak Magnet Weight: 174 oz (x3) Voice Coil Diameter: 65.5 mm (2.6") BOX SPECS:Sealed Box Range: • Net Internal Volume: 0.75 - 2.0 ft³ Recommended Sealed Box: External Dimensions: 15" x 18" x 12.75" Gross Internal Volume: 1.32 ft³ Net Internal Volume: 1.20 ft³ F3, Qtc: 33Hz, 0.92 Vented Box Range: Net Internal Volume: 1.0 - 2.0 ft³ Tuning: 32-36HZ Recommended Vented Box: External Dimensions: 14" x 23.5" x 14" Gross Internal Volume: 1.98 ft³ Vent Area (W x H): 15 in² (3.75” x 4”) Vent Length: 18" Vent Displacement: 0.21 ft³ Net Internal Volume (Vb): 1.65 ft³ F3, Ripple, Fb: 27Hz, 5.9 dB, 33Hz THIELE-SMALL PARAMETERS Sensitivity (1W/1m): 83.7 dB DC Resistance: 7.34Ω Inductance: 56.5 mH Free Air Resonance: 29Hz Equivalent Stiffness: 41.33 L Mechanical Q: 5.39 Electrical Q: 0.67 Total Q: 0.60 Cone Area: 475 cm² Linear Excursion: 20 mm Mechanical Travel: 82 mm Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JL Audio 12TW1-4 TW1 Series thin-line 12" 4-ohm subwoofer General Features: 12" 4-ohm subwoofer mica-filled polypropylene injection-molded cone with rubber surround power range: 75-300 watts RMS peak power handling: 600 watts frequency response: 24-200 Hz sensitivity: 85.15 dB top-mount depth: 4.61" sealed box volume: 0.65 cubic feet ported box volume: 1.125 cubic feet mica-filled polypropylene injection-molded cone with rubber surround power handling: 300 watts RMS (600 watts peak) top-mount depth: 4.61" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JL Audio 10W0v3-4 W0v3 Series 10" 4-ohm subwoofer General Features: 10" 4-ohm subwoofer polypropylene cone with foam surround power range: 75-300 watts RMS peak power handling: 600 watts frequency response: 25-250 Hz sensitivity: 84.07 dB top-mount depth: 4-15/16" sealed box volume: 0.65 cubic feet ported box volume: 1.125 cubic feet grille not included Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.