All Car Amplifiers (436)

Cerwin Vega S9750.1D Stroker Series 750W RMS Monoblock Amplifier General Features: Cerwin Vega S9750.1D Class-D Monoblock 2-Ohm Amplifier 2/1 ohms RMS Power Rating: 750 watts x 1 channel Peak power output: 1500 watts Handles Hi and Low-Level Input Up to 12V Fully Variable 35Hz - 350Hz 12dB Per Octave Crossovers Frequency Response: 10Hz ~ 350Hz (-3dB) Signal to Noise Ratio: > -98dB Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz Dimensions: 11.81"L x 6.69"W x 1.88"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin-Vega SPRO2100.1D 2100W RMS Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob + Absolute KIT0 0 Gauge Amp Kit General Features: Cerwin-Vega Stroker Pro SPRO2100.1D Class-D 1-Ohm Stable Monoblock Amplifier 4 ohms RMS Power Rating: 900 watts x 1 Channel 2 ohms RMS Power Rating: 900 watts x 1 Channel 1 ohm, bridged: 2100 watts x 1 Channel Total RMS output: 2100 watts High-grade industrial aluminum heatsink Military-spec board and high-performance output devices Vector flow cooling design for maximum heat dissipation Can be strapped to an identical twin amplifier for double power Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Soft start turn-on Mono channel operation Speaker-level (high-level) inputs Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Input sensitivity: Low level: .2V-5V Frequency Response: 10 - 250 Hz Total Harmonic Distortion (THD): 0.1% Signal to Noise Ratio (Full power): -90 dB Variable low-pass filter: 40 - 250 Hz Subsonic filter: 10 - 50 Hz Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 160 x 1, external, not included Total Fuse Amperage: 160 amps Dimensions: 10.23"W x 18.03"L x 2.81"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin-Vega SPRO2100.1D 2100W RMS Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob General Features: Cerwin-Vega Stroker Pro SPRO2100.1D Class-D 1-Ohm Stable Monoblock Amplifier 4 ohms RMS Power Rating: 900 watts x 1 Channel 2 ohms RMS Power Rating: 900 watts x 1 Channel 1 ohm, bridged: 2100 watts x 1 Channel Total RMS output: 2100 watts High-grade industrial aluminum heatsink Military-spec board and high-performance output devices Vector flow cooling design for maximum heat dissipation Can be strapped to an identical twin amplifier for double power Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Soft start turn-on Mono channel operation Speaker-level (high-level) inputs Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Input sensitivity: Low level: .2V-5V Frequency Response: 10 - 250 Hz Total Harmonic Distortion (THD): 0.1% Signal to Noise Ratio (Full power): -90 dB Variable low-pass filter: 40 - 250 Hz Subsonic filter: 10 - 50 Hz Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 160 x 1, external, not included Total Fuse Amperage: 160 amps Dimensions: 10.23"W x 18.03"L x 2.81"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle… Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only) General Features: Total power output: 1,200watts 2-Ohms: 150 Watts x 4 channels 4-Ohms: 100 Watts x 4 channels 4-Ohms/Bridged: 300 Watts x 2 channels High-Efficiency Class D Full-Range Amplifiers Hybrid Aluminum Alloy Heatsink for Optimum Dissipation 2-ohm Stereo & 4-ohm Bridged Full-Range Operation MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-12V High-Level or Low-Level RCA Input Automatic Turn-On Hi-Level Signal Sensing Quick Disconnect RCA/High-Level Wire Harness Quick Disconnect Power and Speaker Output Harness Variable 12dB High Pass, Low Pass, & Subsonic Crossovers Amplifier Dimensions 3″W x 1.5″H x 7.75″W Weight: 1.90lbs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier + Metra 82-9601 6-1/2'' to 6-3/4'' Speaker Adapter for 1998-2013 Harley Davidson Touring Models,Black Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle… Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only) General Features: Total power output: 1,200watts 2-Ohms: 150 Watts x 4 channels 4-Ohms: 100 Watts x 4 channels 4-Ohms/Bridged: 300 Watts x 2 channels High-Efficiency Class D Full-Range Amplifiers Hybrid Aluminum Alloy Heatsink for Optimum Dissipation 2-ohm Stereo & 4-ohm Bridged Full-Range Operation MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-12V High-Level or Low-Level RCA Input Automatic Turn-On Hi-Level Signal Sensing Quick Disconnect RCA/High-Level Wire Harness Quick Disconnect Power and Speaker Output Harness Variable 12dB High Pass, Low Pass, & Subsonic Crossovers Amplifier Dimensions 3″W x 1.5″H x 7.75″W Weight: 1.90lbs Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier + Absolute 8 Gauge Amp Kit Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle… Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only) General Features: Total power output: 1,200watts 2-Ohms: 150 Watts x 4 channels 4-Ohms: 100 Watts x 4 channels 4-Ohms/Bridged: 300 Watts x 2 channels High-Efficiency Class D Full-Range Amplifiers Hybrid Aluminum Alloy Heatsink for Optimum Dissipation 2-ohm Stereo & 4-ohm Bridged Full-Range Operation MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-12V High-Level or Low-Level RCA Input Automatic Turn-On Hi-Level Signal Sensing Quick Disconnect RCA/High-Level Wire Harness Quick Disconnect Power and Speaker Output Harness Variable 12dB High Pass, Low Pass, & Subsonic Crossovers Amplifier Dimensions 3″W x 1.5″H x 7.75″W Weight: 1.90lbs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier + Absolute 4Gauge Amp Kit Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle… Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only) General Features: Total power output: 1,200watts 2-Ohms: 150 Watts x 4 channels 4-Ohms: 100 Watts x 4 channels 4-Ohms/Bridged: 300 Watts x 2 channels High-Efficiency Class D Full-Range Amplifiers Hybrid Aluminum Alloy Heatsink for Optimum Dissipation 2-ohm Stereo & 4-ohm Bridged Full-Range Operation MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-12V High-Level or Low-Level RCA Input Automatic Turn-On Hi-Level Signal Sensing Quick Disconnect RCA/High-Level Wire Harness Quick Disconnect Power and Speaker Output Harness Variable 12dB High Pass, Low Pass, & Subsonic Crossovers Amplifier Dimensions 3″W x 1.5″H x 7.75″W Weight: 1.90lbs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik OD1-3500D OVERDRIVE Series Monoblock Amplifier We’re in a time where small is “in.”  Smaller, more economical vehicles are more and more desirable.  But that doesn’t mean you must sacrifice big power for your system. Overdrive amplifiers pack huge amounts of power into small chassis thanks to efficient full-range Class-D topology and SMT technology. Complimented with every possible preamp adjustment, overdrive amplifiers leave nothing to be desired… General Features: 1-ohm Stable Monoblock Operation for MAX Power Bridge 2 Monoblocks Together for Double Power! Military Grade PCB w/ PWM MOSFET Power Supply Direct Short, Thermal, & Overload Circuit Protection High/Speaker Level & Low Level/RCA Input 4g Power Wire & 8g Speaker Wire Outputs Variable 12dB High & Low Pass Crossovers 12dB Bass Boost Increases Low Octave Harmonics Amplifier Dimensions (2.3″H x 7.25″W x 13.75″L) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MOFO4-3KD 3000 Watts MOFO Series 4 Channel Class D Car Amplifier For decades, car amplifiers have been repetitiously manufactured having a common horizontal shape. While practical, this stereotypical form factor has gone stale. End caps & trim bezels do their best to spruce up lifeless heatsinks. However, at the end of the day, this lack of creativity might leave you desiring more. It’s time to break these stubborn habits and set in motion a new trend in amplifier design. MOFO amplifiers depart from the mundane squatty shape of conventional amplifiers, bringing the character back to amplifier design. A diecast aluminum 4-leg pedestal secures a compact 5”x5” MOFO tower chassis, leaving ample floor space in any trunk or cargo space. You could even attach MOFO amps to wall panels with an included wall-mount bracket. Keeping up with your demands, MOFO amps use advanced high-current power supplies and Class D output topology delivering power beyond your wildest dreams… General Features: 5” Square Monolith Chassis Design for Installation Versatility Die-cast Aluminium 4-leg Pedestal for Vertical Installation Mounting Bracket for Wall or Horizontal Mounting Included 2-ohm Stability Accommodates Various Speaker Configurations Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mv-6V Low-Level RCA Input Accepts Balanced Signal Variable 12dB/Octave High Pass & Low Pass Crossovers 8ga Power/Ground Wire Terminals, 4ga Adapter Included 8ga Direct Connect Speaker Output Wire Terminals Maximum Power: 3000 Watts Low-Frequency Response: 40 Hz High-Frequency Response: 3000 Hz Number of Channels: 4 Frequency Response: 40-3000 Hz Built-In Crossovers: Yes RMS Power Output: 250 Watts RMS Power Range: 500 Watts Amplifier Class : D Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MOFO4-2KD 2000 Watts MOFO Series 4 Channel Class D Car Amplifier For decades, car amplifiers have been repetitiously manufactured having a common horizontal shape. While practical, this stereotypical form factor has gone stale. End caps & trim bezels do their best to spruce up lifeless heatsinks. However, at the end of the day, this lack of creativity might leave you desiring more. It’s time to break these stubborn habits and set in motion a new trend in amplifier design. MOFO amplifiers depart from the mundane squatty shape of conventional amplifiers, bringing the character back to amplifier design. A diecast aluminum 4-leg pedestal secures a compact 5”x5” MOFO tower chassis, leaving ample floor space in any trunk or cargo space. You could even attach MOFO amps to wall panels with an included wall-mount bracket. Keeping up with your demands, MOFO amps use advanced high-current power supplies and Class D output topology delivering power beyond your wildest dreams… General Features: 5” Square Monolith Chassis Design for Installation Versatility Die-cast Aluminium 4-leg Pedestal for Vertical Installation Mounting Bracket for Wall or Horizontal Mounting Included 2-ohm Stability Accommodates Various Speaker Configurations Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mv-6V Low-Level RCA Input Accepts Balanced Signal Variable 12dB/Octave High Pass & Low Pass Crossovers 8ga Power/Ground Wire Terminals, 4ga Adapter Included 8ga Direct Connect Speaker Output Wire Terminals Maximum Power: 2,000 Watts Low-Frequency Response: 40 Hz High-Frequency Response: 3000 Hz Number of Channels: 4 Frequency Response: 40-3000 Hz Built-In Crossovers: Yes RMS Power Output: 150 Watts RMS Power Range: 300 Watts Amplifier Class: D  ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MOFO1-6KD 6000 Watts MOFO Series Monoblock Class D Car Amplifier For decades, car amplifiers have been repetitiously manufactured having a common horizontal shape. While practical, this stereotypical form factor has gone stale. End caps & trim bezels do their best to spruce up lifeless heatsinks. However, at the end of the day, this lack of creativity might leave you desiring more. It’s time to break these stubborn habits and set in motion a new trend in amplifier design. MOFO amplifiers depart from the mundane squatty shape of conventional amplifiers, bringing the character back to amplifier design. A diecast aluminum 4-leg pedestal secures a compact 5”x5” MOFO tower chassis, leaving ample floor space in any trunk or cargo space. You could even attach MOFO amps to wall panels with an included wall-mount bracket. Keeping up with your demands, MOFO amps use advanced high-current power supplies and Class D output topology delivering power beyond your wildest dreams… General Features: 5” Square Monolith Chassis Design for Installation Versatility Die-cast Aluminum 4-leg Pedestal for Vertical Installation Mounting Bracket for Wall or Horizontal Mounting Included Direct Short, Thermal, & Overload Circuits Protect Amplifier On-board Protection Mode & Signal Clipping Indicators 1-ohm Stability Accommodates Various Speaker Configurations 200mv-6V Low-Level RCA Input Accepts Balanced Signal Variable 12dB High Pass/Subsonic & Low Pass Crossovers Variable 0-12dB 45Hz Bass Boost Increases Bass Harmonics 4ga Power/Ground Wire Terminals, 0ga Adapter Included 8ga Direct Connect Speaker Output Wire Terminals Dash-Mount Remote Level Control Included MOFO1-6KD Details 1,100w x 1 @ 4 ohm 1,700w x 1 @ 2 ohm 2,500w x 1 @ 1ohm 6,000w MAX Power 80Hz-20kHz Low Pass Crossover 15-80Hz Hi Pass/Subsonic Crossover 0-12dB Variable 45Hz Bass Boost Dimensions: 5.75” sq. x 7.00”h ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.