All Car Amplifiers (419)

Soundstream PN4.520D 1000W 4-Channel Picasso Nano Series Class D Amplifier When you get your first look at Picasso Nano Amplifiers, you will realize that size really does not matter too much at all. It is amazing and quite unbelievable that such a small piece of music-amplifying equipment can have such an amazing output. What’s more, in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears.  General Features: Picasso Nano Series 4-Channel Class D Car Amplifier RMS Power Rating: 4 ohms: 140 watts x 4 channel RMS Power Rating:2 ohms: 250 watts x 4 channel RMS Power Rating: Bridged, 4 ohms: 500 watts x 2 channel Pulse Width Modulated MOSFET power supply Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Input sensitivity: 200mV - 6V High-pass/low-pass filter: 80 Hz, 24 dB/octave Dimensions: 4.75"W x 10.25"L x 1.50"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PN4.520D 520W Picasso Nano Series Class-D Digital 4-Channel Amplifier When you get your first look at Picasso Nano Amplifiers, you will realize that size really does not matter too much at all. It is amazing and quite unbelievable that such a small piece of music-amplifying equipment can have such an amazing output. What’s more, in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears. General Features: Picasso Nano Series 4-Channel Class D Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 130 watts x 4 channel RMS Power Rating: 4 ohms, Bridged: 260 x 2 channel Max power output: 520 watts Pulse Width Modulated MOSFET power supply Heavy-duty aluminum heatsink Soft turn-on circuit Speaker-level (high-level) inputs Thermal and speaker short protection circuitry 4 and 2 channel operation Selectable Crossover modes: HP (80Hz) / Full / LP (80Hz) Fuse rating: 40A x 1 Dimensions: 4.75"W x 9"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PN5.640D Picasso Nano Series Class D 5ch Amplifier General Features: When you get your first look at Picasso Nano Amplifiers, you will realize that size really does not matter too much at all. It is amazing and quite unbelievable that such a small piece of music-amplifying equipment can have such an amazing output. What’s more, in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears.  You can install the amplifier under the front seat or the back seat, and you’ll still have enough space between the seat and the amplifier for ventilation. What’s more, the amplifier does not get heated up after a half-hour of continuous music playing at high volume. Thanks to the full-range crossovers the amplifier is equipped with, you sense no sound distortion even when the volume is turned up to the maximum. Other sport compact amplifiers use bizarre technologies with pseudo power supplies. Picasso Nanos use tried and tested MOSFET power supplies & tenacious Class D circuitry. General Features: Picasso Nano Series 5-Channel Class D Car Amplifier RMS Power Rating: 4 ohms: 60 watts x 4 channel + 200 watts RMS Power Rating: 2 ohms: 80 watts x 4 channel + 350 watts RMS Power Rating: 4 ohms, Bridged: 160 x 2 channel Max power output: 640 watts Full Pulse Width Modulated MOSFET power supply SMD technology on double-sided PCB Soft turn-on circuit Thermal and speaker short protection circuitry Dash mount remote bass level control included Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) Sensitivity: 70 dB Speaker-level (high-level) inputs Variable low-pass filter (35-250 Hz, 24 dB/octave) Subsonic filter (12 dB at 10-50 Hz) 4 gauge power and ground wiring is required for installation Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier Dimensions: 4.75"W x 10.3"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the PN5.640D package: PN5.640D owner's manual 5-channel amplifier One 40 amp ATO fuse (installed) Three 4" RCA input harnesses Three 7" Speaker level input harnesses Wired remote control 16-1/2' Remote control cable Four 5/8" Self-tapping screws Two 1/2" Self-tapping screws ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier A TOUGH MINI AMP THAT PACKS A PUNCH Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack will surely deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT The KTA-30MW is perfect for adding subwoofer power but doesn’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice. HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass Filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to adapt to musical needs automatically Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-30MW package: KTA-30MW owner's manual Mono amplifier 14" Power/signal harness 4 Self-tapping screws Connection sheet Limited Warranty sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACX-300.1 ACX Series All-Weather 300W Monoblock Audio Marine Amplifier AudioControl’s ACX-300.1 all-weather monoblock amplifier delivers honest power levels to the sound system in your boat, ATV, UTV motorcycle, and more. The ACX-300.1 will ensure your open-air speakers and subwoofers provide plenty of punch and clarity all day. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-300.1 all-weather monoblock amplifier the perfect solution for your next adventure. General Features: Audio Control ACX Series ACX-300.1 4-Ohm Monoblock Amplifier RMS Power Rating: 4 ohms: 175 watts x 1 channel RMS Power Rating: 2 ohms: 300 watts x 1 channel Total power output: 600 watts CEA-2006 Compliant Amplifier AccuBASS® One channel operation Frequency Response: 26 - 22000 Hz Total Harmonic Distortion (THD): <0.01% Signal to Noise Ratio: 106 dB Variable low-pass filter: 80 - 120 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the ACX-300.1 package: ACX-300.1 owner's manual Mono amplifier 7" Power & ground harness 7" Speaker output harness ACR-1 Remote Level Control 2 Crimp-on terminals for power & ground harness Harness locking pin ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACX-300.4 4-channel Powersports Marine amplifier, 50 watts RMS x 4 AudioControl’s ACX-300.4 all-weather amplifier delivers honest power levels to the sound system in your boat, ATV, UTV, motorcycle, and more. The ACX-300.4 will ensure your open-air speakers provide plenty of punch and clarity all day long for a two- or four-channel system. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-300.4 all-weather amplifier the perfect solution for your next adventure. General Features: 4/3/2-channel Marine and All Weather Selectable low/hi input stage with independent gain controls. Features AudioControl’s patented AccuBASS® circuitry Low-pass/bypass 12dB/octave Linkwitz-Riley crossover 300 Watts @ 2 Ohms or 175 Watts @ 4 Ohm 4-channel Powersports/marine amplifier 50 watts RMS x 4 at 4 ohms 75 watts RMS x 4 at 2 ohms 150 watts RMS x 2 bridged at 4 ohms Class D amp technology a selectable high-pass filter (bypass, 80, 120 Hz at 12 dB/octave) on front and rear channels Authorized Internet Dealer Dimensions: 10-3/4"W x 2-7/16"H x 3-7/8"D 1-year Manufacturer's Warranty What is in the ACX-300.4 package: ACX-300.4 owner's manual 4-Channel amplifier 7" Power & ground harness Two 7" speaker output harnesses Power & ground harness 2 Crimp-on terminals Harness locking pin ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pioneer GM-DX975 Limited Edition 5-Channel Class-D Car Amplifier with remote bass level control + Absolute KIT4 4 Gauge AMP KitGM-DX975 five-channel amplifier can power your entire car audio system, sending 75 watts RMS to each of your front and rear speakers while delivering up to 600 watts RMS to your sub. CTA-2006 compliant, this highly efficient Class D technology keeps this powerful amp running. This small chassis will be in many out-of-the-way spaces. The frequency response of the full-range channels stretches up to 50,000 Hz to support crystal-clear, Hi-Res playback. And this limited-edition amp uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. Put your GM- DX975 into 3-channel mode to create a strong front soundstage with bass sending 200 watts RMS each to a set of high-performance components up front, plus 600 watts to a sub. The speaker-level inputs allow installing this amp in a factory system without RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. Built-in high and low pass filters let you adjust the sound for your vehicle's interior and a wired remote boost that lets you control the amount of bass boost from the front seat. General Features: Class 5-Channel Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel + 350 watts RMS x 1 channel RMS Power Rating: 2 ohms: 100 watts x 4 channel + 600 watts RMS x 1 channel CTA-2006 Compliant Amplifier Wired remote bass level control included High-Quality Textured Aluminum Panel and Tough Frame 5-channel operation Gold-plated RCA Terminals HQ Sound Parts Frequency Response: 10 Hz to 50000 Hz Total Harmonic Distortion (THD): <0.05% Signal to Noise Ratio: > 94dB Variable low-pass filter: 40-240 Hz, 12 dB/octave Variable Bass Boost: 0 to 18 dB bass boost at 50 Hz Fuse Rating: 30A x 3 4 gauge power and ground wiring is recommended for installation Dimensions: "12-7/16"W x "2"H x "7-7/8"D Authorized Internet Dealer 1-year manufacture warranty What’s in the GM-DX975 package 5-Channel amplifier Three 30-amp ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool x 2 Owner's manual (English/ French) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pioneer GM-DX975 Limited Edition 5-Channel Class-D Car Amplifier with remote bass level controlGM-DX975 five-channel amplifier can power your entire car audio system, sending 75 watts RMS to each of your front and rear speakers while delivering up to 600 watts RMS to your sub. CTA-2006 compliant, this highly efficient Class D technology keeps this powerful amp running. This small chassis will be in many out-of-the-way spaces. The frequency response of the full-range channels stretches up to 50,000 Hz to support crystal-clear, Hi-Res playback. And this limited-edition amp uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. Put your GM- DX975 into 3-channel mode to create a strong front soundstage with bass sending 200 watts RMS each to a set of high-performance components up front, plus 600 watts to a sub. The speaker-level inputs allow installing this amp in a factory system without RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. Built-in high and low pass filters let you adjust the sound for your vehicle's interior and a wired remote boost that lets you control the amount of bass boost from the front seat. General Features: Class 5-Channel Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel + 350 watts RMS x 1 channel RMS Power Rating: 2 ohms: 100 watts x 4 channel + 600 watts RMS x 1 channel CTA-2006 Compliant Amplifier Wired remote bass level control included High-Quality Textured Aluminum Panel and Tough Frame 5-channel operation Gold-plated RCA Terminals HQ Sound Parts Frequency Response: 10 Hz to 50000 Hz Total Harmonic Distortion (THD): <0.05% Signal to Noise Ratio: > 94dB Variable low-pass filter: 40-240 Hz, 12 dB/octave Variable Bass Boost: 0 to 18 dB bass boost at 50 Hz Fuse Rating: 30A x 3 4 gauge power and ground wiring is recommended for installation Dimensions: "12-7/16"W x "2"H x "7-7/8"D Authorized Internet Dealer 1-year manufacture warranty What’s in the GM-DX975 package 5-Channel amplifier Three 30-amp ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool x 2 Owner's manual (English/ French) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pioneer GM-DX971 2400W Max 1-CH Monoblock Class-D Car Audio Amplifier with Remote Bass Control + Absolute KIT4 4 Gauge Amp Kit GM-DX971 is a 1-channel subwoofer amplifier that can deliver up to 1,200 watts RMS to your subwoofer for powerful bass producing a strong and heavy beat. Highly efficient Class D technology and CTA-2006 complaint keep this powerful amp running and designed for a small chassis that fits many out-of-the-way spaces. The speaker-level inputs allow the installation of this amp into a factory system with no RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. The amp's got a low-pass filter that lets you quickly sharpen and focus the bass on suiting your vehicle's interior and a wired remote boost that lets you control the amount of bass boost from the front seat. This limited-edition amp uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. General Features: Class D 1 ohms Stable Monoblock Amplifier RMS Power Rating: 4 ohms: 500 watts x 1 channel RMS Power Rating: 2 ohms: 800 watts x 1 channel RMS Power Rating: 1 ohm: 1200 watts x 1 channel Total RMS power output: 1200 watts CEA-2006 Compliant Amplifier Pulse Width Modulated MOSFET power supply LED Power/Protect Light Wired remote bass level control included Soft start turn-on 3-way protection circuitry (thermal, overload, and speaker short protection) Input sensitivity: Low level: 200mV - 6.5 volts Frequency Response: 10 - 240 Hz Total Harmonic Distortion (THD): 1% Signal to Noise Ratio: 75 dB Variable low-pass filter: 40 - 240 Hz Variable Bass Boost: 0 - 18 dB Fuse Rating: 120A 4 AWG gauge power and ground wiring are recommended for installation. Dimensions: 1-3/4" W x 1-5/8" L x 3/4" H Authorized Internet Dealer 1-year Manufacture Warranty What’s in the GM-DX971 package: 1-Channel Subwoofer Amplifier Three 40-amp ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool Owner's manual (English/ French) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pioneer GM-DX971 2400W Max 1-CH Monoblock Class-D Car Audio Amplifier with Bass Boost Remote GM-DX971 is a 1-channel subwoofer amplifier that can deliver up to 1,200 watts RMS to your subwoofer for powerful bass producing a strong and heavy beat. Highly efficient Class D technology and CTA-2006 complaint keep this powerful amp running and designed for a small chassis that fits many out-of-the-way spaces. The speaker-level inputs allow the installation of this amp into a factory system with no RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. The amp's got a low-pass filter that lets you quickly sharpen and focus the bass on suiting your vehicle's interior and a wired remote boost that lets you control the amount of bass boost from the front seat. This limited-edition amp uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. General Features: Class D 1 ohms Stable Monoblock Amplifier RMS Power Rating: 4 ohms: 500 watts x 1 channel RMS Power Rating: 2 ohms: 800 watts x 1 channel RMS Power Rating: 1 ohm: 1200 watts x 1 channel Total RMS power output: 1200 watts CEA-2006 Compliant Amplifier Pulse Width Modulated MOSFET power supply LED Power/Protect Light Wired remote bass level control included Soft start turn-on 3-way protection circuitry (thermal, overload, and speaker short protection) Input sensitivity: Low level: 200mV - 6.5 volts Frequency Response: 10 - 240 Hz Total Harmonic Distortion (THD): 1% Signal to Noise Ratio: 75 dB Variable low-pass filter: 40 - 240 Hz Variable Bass Boost: 0 - 18 dB Fuse Rating: 120A 4 AWG gauge power and ground wiring are recommended for installation. Dimensions: 1-3/4" W x 1-5/8" L x 3/4" H Authorized Internet Dealer 1-year Manufacture Warranty What’s in the GM-DX971 package: 1-Channel Subwoofer Amplifier Three 40-amp ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool Owner's manual (English/ French) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pioneer GM-DX871 1600 Watts Class D Mono Amplifier w/ Gold-plated RCA Terminals and Bass Boost Remote + Absolute KIT4 4 Gauge Amp KitThe GM-DX871 mono subwoofer amplifier can deliver up to 800 watts RMS to your subwoofer for powerful bass that will give every song a strong and heavy beat. Highly efficient Class D technology keeps this powerful amp running as cool as it looks and allows for a small chassis that fits many out-of-the-way spaces. General Features: Class D Monoblock Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 chan. RMS Power Rating: 2 ohms: 500 watts x 1 chan. RMS Power Rating: 1 ohm: 800 watts x 1 chan. Total power output: 1600 watts CEA-2006 Compliant Amplifier Wired remote bass level control included High-Quality Textured Aluminum Panel and Tough Frame Mono channel operation Gold-plated RCA Terminals HQ Sound Parts Frequency Response: 10 Hz to 240 Hz Total Harmonic Distortion (THD): < 0.5% (100 Hz) Signal to Noise Ratio: >100 dB Variable low-pass filter: 40-240 Hz, 12 dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 40A x 2 4 gauge power and ground wiring is recommended for installation. Dimensions: "10-3/8"W x "2-3/8"H x "7-7/8"D Authorized Internet Dealer What’s in the GM-DX871 package: 1-Channel Subwoofer Amplifier Two 40 A ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool Owner's manual (English/ French/ Spanish) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.