6.5" Component Car Speakers (104)

ALPINE SPV-65X-WRA 6.5" Coaxial + Absolute MPS65B Rollbar Speakers for 2007-2018 Jeep Wrangler JK Alpine SPV-65X-WRA Weather Resistant 6.5" Speakers for 2007-18 Jeep Wrangler JK + Pair of Absolute MPS65B 6.5" Black Wakeboard Tower Speakers With 200 Watts Each Speaker - Truly Marine Grade Withstands Salt Spray, Water, and Sunlight ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer Absolute MPS65BK Black Marine-Grade RV Titanium 6.5" 200W RMS Total Wake Tower POD Waterproof Enclosure Speaker (ONE PAIR) This pair of Titanium Marine-Grade 6.5" 400-Watts Black Wake Tower POD Speakers from Absolute USA is housed in a 100% waterproof enclosure. The speaker system is made of high-density ABS construction with UV coating. The steel-reinforced mounting bracket fits most towers. The speaker cone is polypropylene, and the tweeter is titanium. Terminals are quick-disconnect compression types. The RMS on this system is 200Watts, the frequency response is 40Hz–20kHz. Dimensions are 8.5"H x 8.5"W x 9"D. A braided stainless-steel safety cable and stainless-steel mounting hardware are included. General Feature: 6.5” 2-WAY MARINE POD SPEAKER SYSTEM High Fidelity Speaker System Full Marinized Against Salt & Fresh Water Conditions 100% Completely Waterproof and Rustproof Enclosure & Speaker System injection-molded polypropylene-mica composite cone High-Density ABS Construction with UV Coating Internally Braced Steel Reinforced Nylon Bracket Steel-Reinforced Mounting Bracket Fits Most Towers 1” Polypropylene Speaker Cone with Rubber Surround Adjustable Nylon Mounting Bracket Reinforced with Embedded Steel Completely Water / Rust Resistant Terminals Are Sealed with Rubber Gaskets Specially Tuned for PA Voice Over Polypropylene Mica Injected Cone with Santorini Surround High BL Magnet Motor Structure 1" titanium dome tweeter Heavy Duty Plastic Construction Quick Connect Speaker Terminals 100 Watts RMS Each / 200 Watts RMS Total Power Handling 200 Watts Max Each / 400 Watts Max Total Power Handling Frequency Response 40Hz-20KHz Impedance 4-Ohms Sensitivity 90dB @ 1w/1m Mounting Depth 9” dimensions: 7" x 9-1/2" 2.5" Mounting clamps 360-degree swivel mounts System Includes One Pair Wake Board Speakers Stainless Steel Mounting Brackets Integrated Grills Installation Hardware ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SXE-1751S 6.5" 280w Component + SXE1726S 6.5" 220w 2-Way Car Audio Coaxial Speakers Alpine SXE-1751S 6.5" 280 Watts 2-Way Component Speakers General Features: Rated Power: 45 Watts Peak Power: 280 Watts Nominal Impedance: 4 Ohm Frequency Response: 60Hz - 20,000 Hz Ferrite Woofer Neodym Tweeter Kapton Voice Coil Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine SXE-1726S 6-1/2" 220 Watts 2-Way Coaxial Speakers General Features: Rated Power: 40 Watts RMS Peak Power: 220 Watts Nominal Impedance: 4 Ohm Frequency Response: 60Hz - 200Hz Sensitivity: 92dB/W/m Neodymium Magnet Mylar-Titanium Balanced Dome Tweeter Ferrite Magnet Long Fibre Natural Pulp Cone High Polymer Foam Edge Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers TURN IT UP If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. General Features: 6.5-inch R-Series Component 2-way Car Speakers component speaker system includes two woofers, 2 tweeters, and 2 external crossovers Power Handling: Peak: 300 watts RMS: 100 watts 4 Ohms impedance Frequency response: 65Hz-40kHz Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology CFRP increases the speakers’ mid-bass performance and dynamic range CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately) Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 2 Woofers Two 6-1/2" Adapter rings (includes GM/Chrysler) Two 6x8 Adapter rings 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws Eight 1/2" Screws 8 Speed-clips Eight M4x12mm Machine screws Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration note Important Notice sheet Template and specs on the box Alpine R-S65C.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers TURN IT UP If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. General Features: 6.5-inch R-Series Component 2-way Car Speakers component speaker system includes two woofers, 2 tweeters, and 2 external crossovers Power Handling: Peak: 300 watts RMS: 100 watts 4 Ohms impedance Frequency response: 65Hz-40kHz Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology CFRP increases the speakers’ mid-bass performance and dynamic range CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately) Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 2 Woofers Two 6-1/2" Adapter rings (includes GM/Chrysler) Two 6x8 Adapter rings 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws Eight 1/2" Screws 8 Speed-clips Eight M4x12mm Machine screws Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration note Important Notice sheet Template and specs on the box Alpine R-S65C.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine S2-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround, which creates incredible linearity and colorization rejection.General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 480 watts per set / 240 watts on each side RMS Power Handling: 160 watts per set / 80 watts on each side Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the S2-S65C package: S2-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers TURN IT UP If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. General Features: 6.5-inch R-Series Component 2-way Car Speakers component speaker system includes two woofers, 2 tweeters, and 2 external crossovers Power Handling: Peak: 300 watts RMS: 100 watts 4 Ohms impedance Frequency response: 65Hz-40kHz Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology CFRP increases the speakers’ mid-bass performance and dynamic range CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately) Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation Authorized Dealer 1-year Manufacturer's Warranty What's in the R-S65C.2 package: 2 Woofers Two 6-1/2" Adapter rings (includes GM/Chrysler) Two 6x8 Adapter rings 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws Eight 1/2" Screws 8 Speed-clips Eight M4x12mm Machine screws Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration note Important Notice sheet Template and specs on the box R-S65C.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SXE-1751S 6.5" 280 Watts 2-Way Component Speakers General Features: Rated Power: 45 Watts Peak Power: 280 Watts Nominal Impedance: 4 Ohm Frequency Response: 60Hz - 20,000 Hz Ferrite Woofer Neodym Tweeter Kapton Voice Coil Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the SXE-1751S package: 6.5" Speakers (2) Grilles (2, detached) Mounting screws (8) Mounting screws (8) Speaker connection cables (2) User manual SXE-1751S owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers   TURN IT UP If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. General Features: 6.5-inch R-Series Component 2-way Car Speakers component speaker system includes two woofers, 2 tweeters, and 2 external crossovers Power Handling: Peak: 300 watts RMS: 100 watts 4 Ohms impedance Frequency response: 65Hz-40kHz Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology CFRP increases the speakers’ mid-bass performance and dynamic range CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately) Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 2 Woofers Two 6-1/2" Adapter rings (includes GM/Chrysler) Two 6x8 Adapter rings 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws Eight 1/2" Screws 8 Speed-clips Eight M4x12mm Machine screws Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration note Important Notice sheet Template and specs on the box Alpine R-S65C.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Cerwin Vega Mobile V465C Vega Series 6.5" 400W 2-Way Component Speaker System General Features: 6.5" Vega Series 2-Way Component System Peak Power Handling: 400 watts RMS Power Handling: 100 watts Mica-filled poly cone Vega's signature red surround 1" titanium dome tweeter Frequency Response: 55-20,000 Hz Top-mount Depth: 2.78" Sensitivity: 94dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov