00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega Mobile H765C HED Series 6.5" 360-Watt Component Speaker System
$89.99
$199.99
CERWIN-VEGA MOBILE H765C HED(R) Series 6.5" 360-Watt Component Speaker System
For the best live concert experience and most distortion-free performance, look no further than Cerwin-Vega Mobile speakers. They utilize high-energy, high-tolerance components to achieve the best reproduction of music. This pair of HED Series Component Coaxial Speakers (6.5 in., 800 Watts max) features stamped steel, vented airflow basket frames, and graphite-injected reinforced spun cones for higher wattage output. For maximum sonic performance, Cerwin-Vega Mobile speakers deliver!Cerwin-Vega was founded in 1954 introduced lots of product innovations quickly gaining tremendous respect from music professionals and fans worldwide.
General Features:
6.5" HED Series 2-Way Component Car Speakers
Power Handling Peak: 800 watts per set / 400 watts each side
Power Handling RMS: 120 watts per set / 60 watts each side
Graphite-injected reinforced spun cone
Rubber surround built to protect against the elements
1" Silk Dome Tweeters featuring a mesh grill
Separate high and low pass crossovers designed for an easier install
Rubber magnet boot cover
Stamped steel vented frame for increased airflow
Linear woven treated red spider
Top-mount Depth: 2.24"
Cutout Dimensions: 5.70"
4 ohms impedance
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the H765C package:
6.5" Speakers (2)
Grilles (2, detached)
Speaker mounting brackets (2)
Tweeters (2)
Tweeter surface mounts (2)
Crossover networks (2)
Mounting screws (4)
Mounting screws (8)
Speaker connection cables (2)
H765C owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Rockford Fosgate PRIME R165-S 160W Peak 80W RMS 6.5" 2-Way PRIME Series Component Car Audio Speaker System
$149.98
$479.99
2 Rockford Fosgate PRIME R165-S 160W Peak 80W RMS 6.5" 2-Way PRIME Series Component Car Audio Speaker System
The Prime R165-S is a 6.5" 2-way component system rated at 40 watts RMS for a new generation of factory replacement speakers. Kit includes two woofers with grilles, two tweeters with integrated crossovers, and mounting hardware.
General Features:
6-1/2" 2-way PRIME Series Component System
Peak Power Handling: 160 watts per set / 80 watts each side
RMS Power Handling: 80 watts per set / 40 watts each side
Recommended power range: 10 - 50 watts per channel
1/2" (13mm) Mylar balanced dome tweeter with an in-line crossover delivers crisp high-frequency response
Easy installation of flush, surface, or angle mounting
Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation
Foam surround allows fluid movements for accurate sound reproduction
In-line 6dB/octave tweeter crossover filter
1" high-temperature voice coil
Perfect for original factory replacement
Grilles and mounting hardware included
Cold rolled steel frame
CEA-2031 compliant speakers
Frequency response: 60-20,000 Hz
Sensitivity: 89 dB
Impedance: 4 Ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the R165-S package:
2 Woofers
2 Tweeters
2 Woofer grilles
2 Flush-mounting tweeter housings
2 Angled surface mounting tweeter housings
2 Flush-mount retaining clips
Two 12' lengths of speaker wire
Eight 1-1/4" Self-tapping screws
Four 5/8" Flat-head screws
Installation/Operation instructions
R165-S owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate PRIME R165-S 160W Peak 80W RMS 6.5" 2-Way PRIME Series Component Car Audio Speaker System
$74.99
$239.99
Rockford Fosgate PRIME R165-S 160W Peak 80W RMS 6.5" 2-Way PRIME Series Component Car Audio Speaker System
The Prime R165-S is a 6.5" 2-way component system rated at 40 watts RMS for a new generation of factory replacement speakers. Kit includes two woofers with grilles, two tweeters with integrated crossovers, and mounting hardware.
General Features:
6-1/2" 2-way PRIME Series Component System
Peak Power Handling: 160 watts per set / 80 watts on each side
RMS Power Handling: 80 watts per set / 40 watts each side
Recommended power range: 10 - 50 watts per channel
1/2" (13mm) Mylar balanced dome tweeter with an in-line crossover delivers crisp high-frequency response
Easy installation of flush, surface, or angle mounting
Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation
Foam surround allows fluid movements for accurate sound reproduction
In-line 6dB/octave tweeter crossover filter
1" high-temperature voice coil
Perfect for original factory replacement
Grilles and mounting hardware included
Cold rolled steel frame
CEA-2031 compliant speakers
Frequency response: 60-20,000 Hz
Sensitivity: 89 dB
Impedance: 4 Ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the R165-S package:
2 Woofers
2 Tweeters
2 Woofer grilles
2 Flush-mounting tweeter housings
2 Angled surface mounting tweeter housings
2 Flush-mount retaining clips
Two 12' lengths of speaker wire
Eight 1-1/4" Self-tapping screws
Four 5/8" Flat-head screws
Installation/Operation instructions
R165-S owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate PRIME R165-S 160W Peak 80W RMS 6.5" 2-Way PRIME Series Component Car Audio Speaker System
$74.99
$149.98
Rockford Fosgate PRIME R165-S 160W Peak 80W RMS 6.5" 2-Way PRIME Series Component Car Audio Speaker System
The Prime R165-S is a 6.5" 2-way component system rated at 40 watts RMS for a new generation of factory replacement speakers. Kit includes two woofers with grilles, two tweeters with integrated crossovers, and mounting hardware.
General Features:
6-1/2" 2-way PRIME Series Component System
Peak Power Handling: 160 watts per set / 80 watts on each side
RMS Power Handling: 80 watts per set / 40 watts each side
Recommended power range: 10 - 50 watts per channel
1/2" (13mm) Mylar balanced dome tweeter with an in-line crossover delivers crisp high-frequency response
Easy installation of flush, surface, or angle mounting
Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation
Foam surround allows fluid movements for accurate sound reproduction
In-line 6dB/octave tweeter crossover filter
1" high-temperature voice coil
Perfect for original factory replacement
Grilles and mounting hardware included
Cold rolled steel frame
CEA-2031 compliant speakers
Frequency response: 60-20,000 Hz
Sensitivity: 89 dB
Impedance: 4 Ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the R165-S package:
2 Woofers
2 Tweeters (each with attached 70" speaker wire terminated by quick-slide connectors)
2 Woofer grilles
2 Flush-mounting tweeter housings (with tweeters installed)
2 Angled surface mounting tweeter housings
2 Flush-mount retaining clips
Two 12' lengths of speaker wire
Eight 1-1/4" Self-tapping screws
Four 5/8" Flat-head screws
Installation/Operation instructions
R165-S owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-S65C 240W 6.5" Component Type-S 2 way speaker set with 1" Silk Tweeters
$139.95
$250.00
Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type S-Series 2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features:
6-1/2" S Series 2-way Component System Car Speakers
Power Handling:
Polypropylene-Mica cone material
Rubber speaker surround
1" Silk Dome Tweeters
H.A.M.R. (High Amplitude Multi-Roll) surround
First Carbon Fiber Reinforced Plastic (CFRP)
1.38" Voice coil
magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 70 - 22000 Hz
Sensitivity: 88 dB
Speaker grilles are sold separately
Authorized Internet Dealer
1-year Manufacture Electronix Warranty
What is in the S-S65C package:
S-S65C owner's manual
2 Woofers
2 Woofer mount adapter brackets
2 Tweeters
2 Flush mount housings
2 Tweeter grilles
Two 37" Tweeter wires with in-line crossovers
2 Flush mount retention rings
2 Stealth brackets
Eight 1-3/16" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE S-S65C 240w 6.5" Car Audio Component Speakers w/1 Tweeters
$139.95
$279.99
Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type S-Series 2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features:
6-1/2" S Series 2-way Component System Car Speakers
Power Handling:
Polypropylene-Mica cone material
Rubber speaker surround
1" Silk Dome Tweeters
H.A.M.R. (High Amplitude Multi-Roll) surround
First Carbon Fiber Reinforced Plastic (CFRP)
1.38" Voice coil
magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 70 - 22000 Hz
Sensitivity: 88 dB
Speaker grilles are sold separately
Authorized Internet Dealer
1-year Manufacture Electronix Warranty
What is in the S-S65C package:
S-S65C owner's manual
2 Woofers
2 Woofer mount adapter brackets
2 Tweeters
2 Flush mount housings
2 Tweeter grilles
Two 37" Tweeter wires with in-line crossovers
2 Flush mount retention rings
2 Stealth brackets
Eight 1-3/16" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Pairs ALPINE S-S65C 240w 6.5" Car Audio Component Speakers w/1 Tweeters
$265.90
$350.00
2 Alpine S-S65C 240W 6.5" Component Type-S 2 way speaker set w/ Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features:
6-1/2" Type-S Series Car Speakers
Peak Power Handling: 480 watts per pair / 240 watts each
RMS Power Handling: 160 watts per pair / 80 watts each (CEA-2031 Certified)
Tuned poly-mica cone woofer
Butyl rubber surround for natural response and stability
1" Wide-Range Silk dome tweeter
Optimized air-flow design
Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity
HD Polymer frame
FEA optimized motor structure
OEM mounting adapters included
Swivel-mount tweeter
4 ohms impedance
Square-wire short voice coil
New cone design allows for faster energy transfer & clarity
Aramid reinforced TIL bobbin holds voice coil wire very rigid
High-grade network components
Neodymium tweeter magnet structure
Low distortion strontium woofer magnet
Speaker grilles KTE-S610G optional and sold separately
Top-mount depth: 2-1/4"
What is in the S-S65C package:
2 Woofers
2 Woofer mount adapter brackets
2 Tweeters (each has a 29" length of wire attached)
2 Flush mount housings (with tweeters installed)
2 Tweeter grilles
Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-3/16" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
S-S65C owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Pairs ALPINE X-S65C 6.5" 360 Watt Type-X Component Car Speakers
$799.90
$2,200.00
2 Pair Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers
If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles.
All about the build
Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures.
Serious power handling
The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS.
General Features:
6.5 X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount depth: 2-5/16"
Cutout Dimensions: 5-13/32"
4 ohms impedance
Frequency Response: 55 - 50,000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
What is in the X-S65C package:
2 Woofers + 2 Woofer grilles
2 Grille badges
2 Tweeters (each has a 26" length of wire attached)
2 Tweeter grilles (installed)
2 Surface mount housings (with tweeters installed)
Two tweeter crossovers (each has attached 32" input and 14" output wires)
2 Rectangular adhesive-backed pads (crossover)
2 Circular adhesive-backed discs (tweeter)
Eight 1-1/8" Screws + Eight 5/8" Screws
8 Speed-clips + 4 Speed nuts
Four 5" Zip ties
Warranty information
Important Notice
Online product registration information
Templates and specs on the box
X-S65C owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Pairs ALPINE X-S65C X-Series 6-1/2" component speaker system
$799.90
$2,200.00
2 Pair Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers
If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles.
All about the build
Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures.
Serious power handling
The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS.
General Features:
6.5 X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount depth: 2-5/16"
Cutout Dimensions: 5-13/32"
4 ohms impedance
Frequency Response: 55 - 50,000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
What is in the X-S65C package:
2 Woofers + 2 Woofer grilles
2 Grille badges
2 Tweeters (each has a 26" length of wire attached)
2 Tweeter grilles (installed)
2 Surface mount housings (with tweeters installed)
Two tweeter crossovers (each has attached 32" input and 14" output wires)
2 Rectangular adhesive-backed pads (crossover)
2 Circular adhesive-backed discs (tweeter)
Eight 1-1/8" Screws + Eight 5/8" Screws
8 Speed-clips + 4 Speed nuts
Four 5" Zip ties
Warranty information
Important Notice
Online product registration information
Templates and specs on the box
X-S65C owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SPV-65X-WRA 2-Way Weather Resistant System for 07-18 Jeep® Wrangler JK
$219.95
$299.95
ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles
Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design.
General Features:
6-1/2" 2-Way Component System
Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited
Front or Rear Soundbar Installation
IP55 Weather Resistant
Power Handling:
Peak: 450 watts per set / 225 watts each side
RMS: 150 watts per set / 75 watts each side
Recommended Power Range: 10 - 75 watts RMS per channel
6-1/2" Cone
1" Teteron Dome Tweeters
CEA-2031 compliant speakers
Top-mount Depth: 2-5/8"
Cutout Dimensions: 5-7/16"
4 ohms impedance
Frequency Response: 70- 22,000 Hz
Sensitivity: 88dB
Authorized Internet Dealer
What's in the box:
Alpine SPV-65X-WRA owner's manual
2 Woofers
2 Tweeters (with 5" wire attached)
2 Tweeter crossovers (in-line)
2 Polyfill sheets
2 Tweeter mounting plates
2 Bridge mount brackets
2 Bridge mount wire covers
2 Foam strips (0.25" x 0.625")
2 Alpine logo badges
Warranty information
Online product registration information
Important Notice sheet
Installation instructions
Specifications on box
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SPV-65X-WRA 6-1/2" Convertible Speaker System
$219.95
$299.95
ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles
Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design.
General Features:
6-1/2" 2-Way Component System
Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited
Front or Rear Soundbar Installation
IP55 Weather Resistant
Power Handling:
Peak: 450 watts per set / 225 watts each side
RMS: 150 watts per set / 75 watts each side
Recommended Power Range: 10 - 75 watts RMS per channel
6-1/2" Cone
1" Teteron Dome Tweeters
CEA-2031 compliant speakers
Top-mount Depth: 2-5/8"
Cutout Dimensions: 5-7/16"
4 ohms impedance
Frequency Response: 70- 22,000 Hz
Sensitivity: 88dB
Authorized Internet Dealer
What's in the box:
Alpine SPV-65X-WRA owner's manual
2 Woofers
2 Tweeters (with 5" wire attached)
2 Tweeter crossovers (in-line)
2 Polyfill sheets
2 Tweeter mounting plates
2 Bridge mount brackets
2 Bridge mount wire covers
2 Foam strips (0.25" x 0.625")
2 Alpine logo badges
Warranty information
Online product registration information
Important Notice sheet
Installation instructions
Specifications on box
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE SPV-65X-WRA 6.5" Coaxial + MPS65W Rollbar Speakers for 2007-2018 Jeep Wrangler JK
$279.99
$499.99
ALPINE SPV-65X-WRA 6.5" Coaxial + Absolute MPS65W Rollbar Speakers for 2007-2018 Jeep Wrangler JK
Alpine SPV-65X-WRA Weather Resistant 6.5" Speakers for 2007-18 Jeep Wrangler JK + Pair of Absolute MPS65W 6.5" White Wakeboard Tower Speakers With 200 Watts Each Speaker - Truly Marine Grade Withstands Salt Spray, Water, and Sunlight
ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles
Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design.
General Features:
6-1/2" 2-Way Component System
Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited
Front or Rear Soundbar Installation
IP55 Weather Resistant
Power Handling:
Peak: 450 watts per set / 225 watts each side
RMS: 150 watts per set / 75 watts each side
Recommended Power Range: 10 - 75 watts RMS per channel
6-1/2" Cone
1" Teteron Dome Tweeters
CEA-2031 compliant speakers
Top-mount Depth: 2-5/8"
Cutout Dimensions: 5-7/16"
4 ohms impedance
Frequency Response: 70- 22,000 Hz
Sensitivity: 88dB
Authorized Internet Dealer
Absolute MPS65W White Marine-Grade RV Titanium 6.5" 200W RMS Total Wake Tower POD Waterproof Enclosure Speaker (ONE PAIR)
This pair of Titanium Marine-Grade 6.5" 400-Watts White Wake Tower POD Speakers from Absolute USA is housed in a 100% waterproof enclosure. The speaker system is made of high-density ABS construction with UV coating. The steel-reinforced mounting bracket fits most towers. The speaker cone is polypropylene, and the tweeter is titanium. Terminals are quick-disconnect compression types. The RMS on this system is 200Watts, the frequency response is 40Hz–20kHz. Dimensions are 8.5"H x 8.5"W x 9"D. A braided stainless-steel safety cable and stainless-steel mounting hardware are included.
General Feature:
6.5” 2-WAY MARINE POD SPEAKER SYSTEM
High Fidelity Speaker System
Full Marinized Against Salt & Fresh Water Conditions
100% Completely Waterproof and Rustproof Enclosure & Speaker System
injection-molded polypropylene-mica composite cone
High-Density ABS Construction with UV Coating
Internally Braced Steel Reinforced Nylon Bracket
Steel-Reinforced Mounting Bracket Fits Most Towers
1” Polypropylene Speaker Cone with Rubber Surround
Adjustable Nylon Mounting Bracket Reinforced with Embedded Steel
Completely Water / Rust Resistant
Terminals Are Sealed with Rubber Gaskets
Specially Tuned for PA Voice Over
Polypropylene Mica Injected Cone with Santorini Surround
High BL Magnet Motor Structure
1" titanium dome tweeter
Heavy Duty Plastic Construction
Quick Connect Speaker Terminals
100 Watts RMS Each / 200 Watts RMS Total Power Handling
200 Watts Max Each / 400 Watts Max Total Power Handling
Frequency Response 40Hz-20KHz
Impedance 4-Ohms
Sensitivity 90dB @ 1w/1m
Mounting Depth 9”
dimensions: 7" x 9-1/2"
2.5" Mounting clamps
360-degree swivel mounts
System Includes
One Pair Wake Board Speakers
Stainless Steel Mounting Brackets
Integrated Grills
Installation Hardware
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov