Hifonics
Hifonics A2500.5D 2500W Class-D 5 Channel Car Amplifier& 4 Gauge AMP Kit
$359.99
$459.99
Hifonics A2500.1D 2500W Class-D Alpha Series 5 Channel Car Amplifier with Bass Remote & Absolute KIT4 4 Gauge Amp Kit
The Hifonics ALPHA A-2500.5D amplifier is a 5-channel amplifier that combines Full Range Super D-Class and Super D-Class Technologies with electronic crossovers. It includes a bass remote.
General Features:
Hifonics A2500.5D
Alpha Series Class-D Compact 2500 Watt 1-Ohm Stable 5-channel Car Audio Amplifier
Power Rating:
4 ohms: 4 x 60 + 1 x 250 x 1 chan.
2 ohms: 4 x 100 + 1 x 450 x 1 chan.
1 ohm: 1 x 750 x 1 chan.(CH5 only)
Total power output: 2000 Watts
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Accu-Cross crossovers allow for complete control of the signal directed to all speakers
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy-duty aluminum alloy heat-sink
The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces high musical power with high cooling efficiency and minimal distortion.
Frequency Response: 10 - 250 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: >95 dB
Variable low-pass filter: 30 - 250 Hz, 12 dB/octave
Subsonic filter: 10 - 50 Hz
Bass Boost: 0-12dB @ 45Hz
Fusing: Use External Fuse
Power Terminal 12V/GND: 4 AWG, 14 AWG
Dimensions: 13"W x 5.75"D x 2.37"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Hifonics
Hifonics A2500.5D 2500W Class-D Alpha Series 5 Channel Car Amplifier with Bass Remote
$349.99
$459.99
Hifonics A2500.1D 2500W Class-D Alpha Series 5 Channel Car Amplifier with Bass Remote
The Hifonics ALPHA A-2500.5D amplifier is a 5-channel amplifier that combines Full Range Super D-Class and Super D-Class Technologies with electronic crossovers. It includes a bass remote.
General Features:
Hifonics A2500.5D
Alpha Series Class-D Compact 2500 Watt 1-Ohm Stable 5-channel Car Audio Amplifier
Power Rating:
4 ohms: 4 x 60 + 1 x 250 x 1 chan.
2 ohms: 4 x 100 + 1 x 450 x 1 chan.
1 ohm: 1 x 750 x 1 chan.(CH5 only)
Total power output: 2000 Watts
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Accu-Cross crossovers allow for complete control of the signal directed to all speakers
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy-duty aluminum alloy heat-sink
The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces high musical power with high cooling efficiency and minimal distortion.
Frequency Response: 10 - 250 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: >95 dB
Variable low-pass filter: 30 - 250 Hz, 12 dB/octave
Subsonic filter: 10 - 50 Hz
Bass Boost: 0-12dB @ 45Hz
Fusing: Use External Fuse
Power Terminal 12V/GND: 4 AWG, 14 AWG
Dimensions: 13"W x 5.75"D x 2.37"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Cerwin Vega Mobile
Cerwin Vega CVP2500.5D 2500W 5-Channel Car Audio Amplifier
$178.99
$499.99
Cerwin Vega CVP2500.5D 5-Channel 2500 Watts Bridgeable Class-D Amplifier
The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for those who are budget-conscious. And with this 2,500-watt Max 5 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an outside third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and that they follow the standards and practices set forth by CTA (Consumer Technology Association).
General Features:
CVP Series 5-Channel Amplifier
Class-D Full-Range Monoblock Amplifier
150 watts x 4 channel + 500 Watts @ 2 Ohms RMS Power
100 watts x 4 channel + 350 Watts @ 4 Ohms RMS Power
300 watts x 2 channel + 500 Watts @ 4 Ohms RMS Power Bridged
Class-D Circuitry
2-Ohm Stereo, 4-Ohm Bridged Full Range Operation
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Variable 12dB High, Low, & Subsonic Crossovers
Dimensions: 14.97"W x 9.38"L x 2.25"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Cerwin Vega Mobile
Cerwin Vega CVP2500.5D 2500W 5-Channel Car Audio Amplifier + 4 Gauge Amp Kit
$199.99
$499.99
Cerwin Vega CVP2500.5D 5-Channel 2500 Watts Bridgeable Class-D Amplifier + Absolute KIT4 4 Gauge Amp Kit
The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for those who are budget-conscious. And with this 2,500-watt Max 5 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an outside third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and that they follow the standards and practices set forth by CTA (Consumer Technology Association).
General Features:
CVP Series 5-Channel Amplifier
Class-D Full-Range Monoblock Amplifier
150 watts x 4 channel + 500 Watts @ 2 Ohms RMS Power
100 watts x 4 channel + 350 Watts @ 4 Ohms RMS Power
300 watts x 2 channel + 500 Watts @ 4 Ohms RMS Power Bridged
Class-D Circuitry
2-Ohm Stereo, 4-Ohm Bridged Full Range Operation
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Variable 12dB High, Low, & Subsonic Crossovers
Dimensions: 14.97"W x 9.38"L x 2.25"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
ALPINE S-A55V
$429.95
$600.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
Alpine S-A55V 540W RMS Car Amplifier S-Series 5-Channel Class D Amplifier
$429.95
$600.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Alpine
Alpine S-A55V S-Series 5ch Amp - 60 Watts x 4 @ 2-Ohms & 300 Watts x 1 @ 2-Ohms
$429.95
$600.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Alpine
ALPINE X-A90V
$899.95
$950.00
Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features:
Alpine X-Series X-A90V
Class-D Full Range 2 ohm Stable 5-Channel Amplifier
RMS Power Rating:
4-channel side
4 ohms: 75 watts x 4 channel
2 ohms: 100 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 200 watts x 2 channel
Subchannel
4 ohms: 300 watts x 1 chan.
2 ohms: 500 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote bass level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
5/3 channel operation
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .5 - 10V
Low level: .2 - 4V
Frequency Response:
4-channel: 10 - 60,000Hz
Sub-channel: 8 - 400Hz
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >105dB
Variable high-pass filter: 50 - 400Hz, -24dB/octave
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Subsonic filter: 8 - 40Hz
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
-Channel amplifier
Three 30A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
3 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Alpine
Alpine X-A90V X-Series 5-Channel Power Density Amplifier
$899.95
$1,500.00
Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features:
Alpine X-Series X-A90V
Class-D Full Range 2 ohm Stable 5-Channel Amplifier
RMS Power Rating:
4-channel side
4 ohms: 75 watts x 4 channel
2 ohms: 100 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 200 watts x 2 channel
Subchannel
4 ohms: 300 watts x 1 chan.
2 ohms: 500 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote bass level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
5/3 channel operation
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .5 - 10V
Low level: .2 - 4V
Frequency Response:
4-channel: 10 - 60,000Hz
Sub-channel: 8 - 400Hz
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >105dB
Variable high-pass filter: 50 - 400Hz, -24dB/octave
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Subsonic filter: 8 - 40Hz
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
-Channel amplifier
Three 30A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
3 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Alpine
Alpine S-A55V Car Amplifier
S-Series 5-Channel Class D Amplifier 540W RMS $429.95 $600.00
S-Series 5-Channel Class D Amplifier 540W RMS $429.95 $600.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Alpine
Alpine X-A90V Car Amplifier
900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohms $899.95 $950.00
900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohms $899.95 $950.00
Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features:
Alpine X-Series X-A90V
Class-D Full Range 2 ohm Stable 5-Channel Amplifier
RMS Power Rating:
4-channel side
4 ohms: 75 watts x 4 channel
2 ohms: 100 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 200 watts x 2 channel
Subchannel
4 ohms: 300 watts x 1 chan.
2 ohms: 500 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote bass level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
5/3 channel operation
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .5 - 10V
Low level: .2 - 4V
Frequency Response:
4-channel: 10 - 60,000Hz
Sub-channel: 8 - 400Hz
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >105dB
Variable high-pass filter: 50 - 400Hz, -24dB/octave
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Subsonic filter: 8 - 40Hz
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
-Channel amplifier
Three 30A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
3 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Diamond Audio
Diamond Audio HX1200.5 1400W RMS HEX-Series 5-Channel Class-D Car Amplifier Amp
$1,029.99
$2,059.98
Diamond Audio HX1200.5 1400W RMS HEX-Series 5-Channel Class-D Car Amplifier Amp
For exceptional studio sound quality, the balance of power and control must be mastered in reproducing accurate sound recordings. HEX series amplifiers deliver the most filtered and cleanest signal by removing unwanted static and transient noise that can affect and degrade any car audio system. HEX series amplifiers are manufactured using top-grade audiophile components to deliver unrivaled sound quality amplification. Inspired by the best technologies from professional studio sound equipment, HEX series amplifiers will surely provide the power and control to reproduce that signature Diamond Audio sound!
General Features:
Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance
4-Layer PCB Board with Balanced Differential Inputs
Full-Range Digital Class D IR Chipset
“SNAP” Capacitors used Throughout Circuit
Audiophile Grade High Tolerance Components
Spring Steel FET Clips Provide Cleaner Board Design
Illuminated Logo/Fully Concealed Mounting
Output Clip Indicators for Precise System Set Up
Fine-Tuned Fully Variable Crossover and Phase Control
Top Mounted Controls for Convenient Amplifier
Specifications:
RMS Power Rating:
RMS Power (4Ω): 100 W X 4 / 480 X 1
RMS Power (2Ω): 150 W X 4 / 800 x 1
Bridged(mono 4Ω): 480 W X 1(sub output)
Bridged(mono 2Ω): 800 W X 1(sub output)
Bridged(stereo 4Ω): 300 W X 2(4Ω) / 800 X 1(2Ω)
Topology: Full Range Class D
Power Supply: Full PWM
Power Supply Threshold: 10.0VDC-170VDC
Idle Current: (0.7A)
THD 4(1KH@4Ω) : 0.06%
S/N Ratio(A weighted@1W): -80dBA
S/N Ratio(A weighted@FP): .95dBA
Low Input Level: 200mV-5.0V
Hight Input Level: N/A
Input Impedance:
Low Input Level: 20 KΩ
High Input Level: N/A
Output Impedance: 0.0297 Ω
Damping Factor(50Hz@4Ω): >250
Bandwidth(-3dB): 10Hz-35KHz
Crossover(-12/24dB/Oct)
Variable High-Pass: 40Hz-400Hz(-12dB Ch1/2/3/4)
Variable Low-Pass: 30Hz-300Hz(-12dB Ch 5)
Variable Sub-Sonic: 10-55Hz @ 18 dB
Fuse Ratings: ATC: 40A X 2
Dimensions:
Length x Width x Height(Inches): 14.25" x 7.67" x 2"
Length x Width x Height(mm): 362 x 195 x 51.5
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.