Wireless Microphones (152)

Samson SWC288HQ6-I I Concert 288 Dual Channel Wireless Handheld System ITEM DESCRIPTION 2 x UHF Q6 Handheld Transmitters Dual-Channel Receiver 16-Channel True Diversity System XLR and 1/4" Outputs 300' Operating Range 2 Separate Volume Controls Includes 4 x AA Alkaline Batteries Rackmount Kit Concert 288 Dual Handheld System High-performance professional UHF wireless system Comes with a rackmount kit CR288 Wireless Receiver True diversity design minimizes dropouts Up to 24 systems (48 performers) can be operated simultaneously across two frequency bands (region dependent) Tone Key and Auto Mute functions eliminate background noise during dropouts Infrared set links the receiver and transmitter channels Dual balanced XLR outputs for routing signals to two separate channels 1/4” unbalanced mix output to combine signals to one output channel Two separate volume controls for each signal Ready and Peak indicators for optimal functionality and monitoring Wireless Transmitter Two Q6 Professional Dynamic Microphones Transmitters offer up to eight hours of battery life using two AA batteries each 300’ operating range Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA MIC3250 Dual Handheld Wireless Mic System  MR DJ USA MIC3250 Dual Channel RF Professional Wireless Microphone System Set with 2 Handheld Microphones, Receiver Base, 1/4'' Audio Connection Cable, Power Adapter - For Karaoke, PA, Public Event  Wide Operation Range: This Dual Channel RF Wireless Microphone System by MR DJ Pro gives you 150 Feet of wireless operation range for cordless singing to karaoke music and mobility for energetic on-stage performances. Perfect for professional engagements, conferences, DJ parties  Mixed 1/4 Inch Output: The Receiver has a ¼-inch mixed output, which lets you connect both microphones to one input on your mixer, stereo, or sound system. Easy to Operate: The portable RF base unit is equipped with AF / RF LED Indicator Lights, which indicate the signal strength of each microphone as it is being used. The mics are color-coded for easy reference, and the unit has an ON / OFF Broadcasting Switch. General Features: MR DJ Dual Handheld Wireless Mic System Freq 110MHz 120MHZ Up to 100-feet Working Range Requires 9-Volt Batteries Infrared Synchronization Technology enhances frequency search and pairs up the receiver and transmitter quickly  110 volts, frequency response 60Hz~12KHz, and up to 150 feet operating distance in a wide-open space Great sound pickup and interference-free sound transmission with maximum feedback rejection Quick and easy pairing up with the receiver via IR synchronization What is in the MIC3250 Package: Receiver Base, (2) Wireless Microphones 1/4'' Audio Connection Cable Wall Power Adapter Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA MIC1200 Lavalier Wireless Microphone System  MR DJ MIC1200 Lavalier Wireless Microphone System, Bodypack Transmitter w/Clip-on Lavalier Microphone, Receiver with 1/4'' Plug, Volume Control - Super Compact Design, Batteries Included General Features: MIC1200 Lavalier Wireless Microphone system Bodypack Transmitter w/Clip-on Lavalier Microphone Receiver with 1/4'' Plug Volume Control - Super Compact Design Batteries Included Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U4R4 2.4 GHz Wireless In-Ear Monitor System with Four Receivers U4 In-Ear Monitor Wireless System U4R4 Four-pack U4 System     Wireless in-ear monitoring solution for four people—a whole band! (includes 4 receivers)     High-quality, ultra-compact wireless system for in-ear monitors     Audiophile 24-bit / 48 kHz sound with less than 5 ms of latency     Industry standard 2.4 GHz wireless technology     Reliable, solid RF connection over a range of 90 feet THE SYSTEM The system comprises a transmitter unit, which connects to your audio source (typically a mixer or sound interface); and a belt-pack receiver, to which you connect your earphones or headphones. LOUD AND CLEAR The U4 system features high-resolution, 24-bit / 48 kHz audio, a wide and smooth frequency response between 20 Hz and 20 kHz, a signal-to-noise ratio of 107 decibels, and more volume than you’ll ever need. The sound is better than that of CD and much better than that of MP3! LONG, EASY CHARGE The internal battery in the transmitter and receiver lasts 5 hours. The battery is easily charged using the included USB cable and any standard 5V USB charger, and charging takes between 1.5 and 2.5 hours depending on the charger's current. DIRECT COMMUNICATION If you have more than one U4 receiver, you can broadcast a signal to a whole group. This can be useful when one person needs to communicate clearly and directly to a group in noisy environments or situations where you don’t want to disturb others. It is an excellent option for group demos, presentations, or tours. FREE AND EASY RECORDING For recording musicians, whether in a home or professional studio, going wireless makes the whole process much freer and more manageable—especially if you’re simultaneously playing or singing AND engineering! DISCREET PRACTICE If you want to practice guitar or bass privately—for example late at night—you can run your signal through a multi-effect unit or modeling amp, send either the ¼” or XLR output to your headphones or earphones, and move freely around your home! BAND ON THE RUN Your whole band—up to six musicians—can use the system together! There can be one monitor mix per transmitter, so if you have multiple U4 sets, you can customize monitor mixes for each band member. This is an easy, great-sounding, cost-effective monitoring solution for studio recording, rehearsals or live gigs. In rehearsal, this also means that there’s no need for PA speakers—so a band can practice in an apartment, or late at night. General Features: WIRELESS TYPE 2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE 24-bit / 48 kHz SWITCHABLE CHANNELS 6 SIMULTANEOUS CHANNELS 6 FREQUENCY RESPONSE 20 Hz – 20 kHz (-3dB) DYNAMIC RANGE 107 dB (-3 dB) SIGNAL-TO-NOISE RATIO  107 dB STEREO/MONO Mono TOTAL HARMONIC DISTORTION 0.2% LATENCY 5 ms OPERATING RANGE 27.5 m / 90 ft (line-of-sight) TRANSMITTER      INCLUDED U4T CONNECTOR XLR or mono unbalanced 1/4” TS with supplied adapter DIMENSIONS 100 x 30 x 28 mm / 3.8" x 1.2" x 1.1" WEIGHT 90 g / 3.17 oz RECEIVER      INCLUDED     U4R HEADPHONE OUTPUT 3.5 mm / 1/8" DIMENSIONS     60 x 47 x 41 mm / 2.36" x 1.85" x 1.61" WEIGHT     118 g / 4.16 oz BATTERY      TYPE Rechargeable Lithium-ion (internal) BATTERY LIFE 5 hours CHARGING TIME 2.5 hrs (full charge) CHARGING VOLTAGE 5V (USB) USABLE WHILE CHARGING Yes Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U4T9 Complete System + T9 In-Ears U4 In-Ear Monitor Wireless System U4T9 Complete System + T9 In-Ears U4 In-Ear Monitor Wireless System, plus T9 In-Ear Monitors Complete IEM system for live performance and in-studio monitoring Also includes a CU4 Carry Case THE SYSTEM The system comprises a transmitter unit, which connects to your audio source (typically a mixer or sound interface); and a belt-pack receiver, to which you connect your earphones or headphones. LOUD AND CLEAR The U4 system features high-resolution, 24-bit / 48 kHz audio, a broad and smooth frequency response between 20 Hz and 20 kHz, a signal-to-noise ratio of 107 decibels, and more volume than you’ll ever need. The sound is better than that of CD and much better than that of MP3! LONG, EASY CHARGE The internal battery in the transmitter and receiver lasts 5 hours. The battery is easily charged using the included USB cable and any standard 5V USB charger, and charging takes between 1.5 and 2.5 hours depending on the charger's current. DIRECT COMMUNICATION If you have more than one U4 receiver, you can broadcast a signal to a whole group. This can be useful when one person needs to communicate clearly and directly to a group in noisy environments or situations where you don’t want to disturb others. It is an excellent option for group demos, presentations, or tours. FREE AND EASY RECORDING For recording musicians, whether in a home or professional studio, going wireless makes the whole process much freer and more manageable—especially if you’re simultaneously playing or singing AND engineering! DISCREET PRACTICE If you want to practice guitar or bass privately—for example late at night—you can run your signal through a multi-effect unit or modeling amp, send either the ¼” or XLR output to your headphones or earphones, and move freely around your home! BAND ON THE RUN Your whole band—up to six musicians—can use the system together! There can be one monitor mix per transmitter, so if you have multiple U4 sets, you can customize monitor mixes for each band member. This is an easy, great-sounding, cost-effective monitoring solution for studio recording, rehearsals or live gigs. In rehearsal, this also means that there’s no need for PA speakers—so a band can practice in an apartment, or late at night. General Features: WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    6 SIMULTANEOUS CHANNELS    6 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    107 dB (-3 dB) SIGNAL-TO-NOISE RATIO    107 dB STEREO/MONO    Mono TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    27.5 m / 90 ft (line-of-sight)TRANSMITTER      INCLUDED    U4T CONNECTOR    XLR or mono unbalanced 1/4” TS with supplied adapter DIMENSIONS    100 x 30 x 28 mm / 3.8" x 1.2" x 1.1" WEIGHT    90 g / 3.17 ozRECEIVER      INCLUDED    U4R HEADPHONE OUTPUT    3.5 mm / 1/8" DIMENSIONS    60 x 47 x 41 mm / 2.36" x 1.85" x 1.61" WEIGHT    118 g / 4.16 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2.5 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio T9 In-Ear Monitors T9 In-Ear Monitors ●  Dual balanced-armature drivers●  Hand-assembled●  Sound-isolating earphones●  3.5 mm earphone jack, compatible with all systems●  Carrying case and cleaning tool included●  Durable, replaceable cables Xvive’s T9 In-Ear Monitors have been designed by top IEM engineers in the USA to offer customers pro-level audio quality—previously only available from custom in-ears—at a much more accessible price.SOUNDS GOOD The T9 has two balanced-armature Knowles drivers: one of the industry’s most significant and most potent mid-bass drivers, and a custom-tuned, custom-ported micro tweeter. Along with a custom unified crossover, these cutting-edge components have the headroom to accommodate whatever EQ adjustments any user may desire. Nonetheless, T9 comes perfectly balanced, with a responsive and detailed sound signature that is not overly hyped or colored. So audiophiles will enjoy a fulfilling listening experience right out of the box.HIGH-PERFORMING T9 is an invaluable tool for performing live musicians, ideally suited to in-studio tracking and mixing. WIRELESS MONITORING T9 IEMs pair perfectly with Xvive’s U4 In-Ear Monitor Wireless System, providing musicians with unbeatable wireless monitoring value for live performance and studio applications. T9 and U4 are sold together as a set called U4T9.WHAT’S IN THE BOX T9 comes with three sizes of earbuds, in red and yellow silicone (using a different color for each side helps you identify right and left) and black memory foam options. There’s also a cleaning tool, a 1/8″-to-1/4″ adapter, and a hardshell carrying case! Specifications FREQUENCY RESPONSE    20 Hz - 16.5 kHz +/- 3 dB IMPEDANCE    59 ohms @ 1 kHz SENSITIVITY    120 dB @ 1 kHz TOTAL HARMONIC DISTORTION (THD)    < 0.2% @ 1 kHz MAGNETIZED FIELD STRNGTH    160 cm (48”) OPERATING TEMPERATURE    -5°C to +50°C STORAGE TEMPERATURE    -20°C to +70°C   Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U4 2.4 GHz In-Ear Monitor Wireless System THE SYSTEM The system comprises a transmitter unit, which connects to your audio source (typically a mixer or sound interface); and a belt-pack receiver, to which you connect your earphones or headphones. LOUD AND CLEAR The U4 system features high-resolution, 24-bit / 48 kHz audio, a wide and smooth frequency response between 20 Hz and 20 kHz, a signal-to-noise ratio of 107 decibels, and more volume than you’ll ever need. The sound is better than that of CD and much better than that of MP3! LONG, EASY CHARGE The internal battery in the transmitter and receiver lasts 5 hours. The battery is easily charged using the included USB cable and any standard 5V USB charger, and charging takes between 1.5 and 2.5 hours depending on the charger's current.drummer with U4 receiver APPLICATIONS The basic application is to run a monitor mix from a wirelessly soundboard to one set of headphones or in-ear monitors—live, at home or in the studio. But there’s a lot more you can do with the U4 System! DIRECT COMMUNICATION If you have more than one U4 receiver, you can broadcast a signal to a whole group. This can be useful when one person needs to communicate clearly and directly to a group in noisy environments or situations where you don’t want to disturb others. It is an excellent option for group demos, presentations, or tours. FREE AND EASY RECORDING For recording musicians, whether in a home or professional studio, going wireless makes the whole process much freer and more manageable—especially if you’re simultaneously playing or singing AND engineering! DISCREET PRACTICE If you want to practice guitar or bass privately—for example late at night—you can run your signal through a multi-effect unit or modeling amp, send either the ¼” or XLR output to your headphones or earphones, and move freely around your home! BAND ON THE RUN Your whole band—up to six musicians—can use the system together! There can be one monitor mix per transmitter, so if you have multiple U4 sets, you can customize monitor mixes for each band member. This is an easy, great-sounding, cost-effective monitoring solution for studio recording, rehearsals or live gigs. In rehearsal, this also means that there’s no need for PA speakers—so a band can practice in an apartment, or late at night. General Features: WIRELESS TYPE     2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE     24-bit / 48 kHz SWITCHABLE CHANNELS     6 SIMULTANEOUS CHANNELS     6 FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     107 dB (-3 dB) SIGNAL-TO-NOISE RATIO     107 dB STEREO/MONO     Mono TOTAL HARMONIC DISTORTION     0.2% LATENCY     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight) TRANSMITTER      INCLUDED     U4T CONNECTOR     XLR or mono unbalanced 1/4” TS with supplied adapter DIMENSIONS     100 x 30 x 28 mm / 3.8" x 1.2" x 1.1" WEIGHT     90 g / 3.17 oz RECEIVER      INCLUDED     U4R HEADPHONE OUTPUT     3.5 mm / 1/8" DIMENSIONS     60 x 47 x 41 mm / 2.36" x 1.85" x 1.61" WEIGHT     118 g / 4.16 oz BATTERY      TYPE     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hours CHARGING TIME     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB) USABLE WHILE CHARGING     Yes U4 In-Ear Monitor Wireless System U4 Complete System     High-quality, ultra-compact wireless system for in-ear monitors     Audiophile 24-bit / 48 kHz sound with less than 5 ms of latency     Industry standard 2.4 GHz wireless technology     Reliable, solid RF connection over a range of 90 feet     Can also wirelessly broadcast to an audio recorder or mixer Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3R 2.4 GHz Dynamic Receiver THE SYSTEM The system comprises a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake. YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, an extensive and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone! HOLD ON TO POWER The internal battery in the transmitter and receiver lasts 5 hours. Both units can be charged simultaneously using the included dual-USB cable and any standard 5V USB charger. Depending on the charger's current, charging takes between 1.5 and 2.5 hours.singer with u3 APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System! FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience! BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, you don’t need a cable or a mixer! Just connect your U3 receiver directly to the cabinet's XLR input. CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning the transmitter’s signal doesn’t have to reach the soundboard or monitor desk—it can broadcast to the front of the stage or any central and convenient location.U3 receiver in mixer GET AMPED Beyond vocal applications, the U3 system can also use microphones for guitar amplifiers and direct audio signals from balanced XLR outputs, such as multi-effect processors or keyboards. PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D! WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power). FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones, and accordions! If you use a condenser microphone, make sure to choose the U3C. FREEDOM ON VIDEO The U3 system can connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones. General Features:     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz U3 Microphone Wireless System U3R Dynamic Receiver     High-fidelity plug-and-play wireless receiver for dynamic microphones, for use with a U3 Transmitter     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3T 2.4 GHz Dynamic Transmitter THE SYSTEM The system comprises a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake. YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, a wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone! HOLD ON TO POWER The internal battery in the transmitter and receiver lasts 5 hours. Both units can be charged simultaneously using the included dual-USB cable and any standard 5V USB charger. Depending on the charger's current, charging takes between 1.5 and 2.5 hours.singer with u3 APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System! FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience! BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, you don’t need a cable or a mixer! Just connect your U3 receiver directly to the cabinet's XLR input. CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixer GET AMPED Beyond all the vocal applications, the U3 system can also use microphones for guitar amplifiers and direct audio signals from balanced XLR outputs, such as multi-effect processors or keyboards. PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D! WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power). FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C. If you use a condenser microphone, make a condenser microphone. FREEDOM ON VIDEO The U3 system can connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones. General Features:     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz U3 Microphone Wireless System U3 Microphone Wireless SystemU3T Dynamic Transmitter     High-fidelity plug-and-play wireless transmitter for dynamic microphones, for use with a U3 Receiver 24-bit / 48 kHz digital audio with low distortion and wide frequency response Stable 2.4 GHz wireless connection with a range of up to 90 feet Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3C 2.4 GHz Complete Condenser System THE SYSTEM The system comprises a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, a wide and smooth frequency response between 20 Hz and 20 kHz, and a signal-to-noise ratio of 107 decibels. Thus, you can sing or speak without compromising the quality of your voice or microphone! HOLD ON TO POWER The internal battery in the transmitter and receiver lasts 5 hours. Both units can be easily charged simultaneously using the included dual-USB cable and any standard 5V USB charger. Depending on the charger's current, charging takes between 1.5 and 2.5 hours.singer with u3 APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System! FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, you don’t need a cable or a mixer! Just connect your U3 receiver directly to the cabinet's XLR input. CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixer GET AMPED Beyond vocal applications, the U3 system can also be used with microphones for guitar amplifiers and direct audio signals from balanced XLR outputs, such as multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones, and accordions! If you use a condenser microphone, make sure to choose the U3C. FREEDOM ON VIDEO The U3 system can connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones. General Features:     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz U3 Microphone Wireless System U3C Complete Condenser System     High-fidelity plug-and-play wireless system for condenser microphones     Provides 12V or 48V phantom power to any connected condenser microphone     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3 2.4 GHz Microphone Wireless System THE SYSTEM The system comprises a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake. YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, a broad and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone! HOLD ON TO POWER The internal battery in the transmitter and receiver lasts 5 hours. Both units can be easily charged simultaneously using the included dual-USB cable and any standard 5V USB charger. Depending on the charger's current, charging takes between 1.5 and 2.5 hours.singer with u3 APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System! FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience! BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, you don’t need a cable or a mixer! Just connect your U3 receiver directly to the cabinet's XLR input. CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixer GET AMPED Beyond audio applications, the U3 system can also use microphones for guitar amplifiers and direct audio signals from balanced XLR outputs for multi-effect processors or keyboards. PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D! WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power). FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! If you use a condenser microphone, makeure to choose the U3C i FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications With the Xvive U3D digital wireless audio system, you can simultaneously use dynamic microphones or send audio to active speakers. Operating in the 2.4 GHz wireless band, with a 20 Hz to 20 kHz frequency response and less than 5 ms latency, the U3D can be used by presenters, performers, and DJs for various applications. General Features:     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz U3 Microphone Wireless System U3 Complete Dynamic System     High-fidelity plug-and-play wireless system for dynamic microphones     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.