Car Audio & Video
Car Speaker Bundle
Car Stereo Bundle
Marine Audio & Recreation
Car Stereo
Rearview Backup Cameras
Car Subwoofer
temporary import
Car Speaker
CAR AMPLIFIERS
Loaded Car Subwoofer Enclosure
CAR AMPLIFIERS BUNDLES
LOADED ENCLOSURES BOX
Under Car Seat Powered Subwoofers
Speaker Grill Mesh Cover
CAR AMPLIFIERS ACCESSORIES
Car Subwoofer Bundle
Car Subwoofers with Amplifier and Box Packages
Bluetooth Speakers
Car Component Speaker
Subwoofer Level Controller
Car Amplifier Wiring Amp Kit
Remote Bass Knob
Car EQ's & Sound Processors
Back to all products
alpine
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S68 Car Speaker 460W 6x8" 5x7" Type-S 2-Way Coaxial Car Speakers
$299.90
$399.99
Alpine S2-S68 6x8" or 5x7" 460W Peak (150W RMS) 6x8" S-Series 2-way 4-ohm Coaxial Car Speakers
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S68 6x8” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point.
General Features:
6" x 8" S Series 2-way Coaxial Car Speakers
Peak Power Handling: 460 watts per pair / 230 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Hi-Res Audio certified
Combined Polypropylene, Glass Fiber, and Mica cone material
High-Amplitude Multi-Roll (HAMR) speaker surround
1" Cloth Dome tweeters
3.54" magnet and enhanced motor structure with 110% power handling
Lightweight design with high output and low distortion
Wide vehicle fitment range for easy installation
Top-mount Depth: 2-3/8"
Cutout Dimensions: 5 x 7-3/16
Impedance: 4 ohms
Frequency Response: 75 - 40,000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the Alpine S2-S68 Package:
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other)
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
Alpine S2-S68 owner's manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S69 260 Watt 6x9" Coaxial 2-Way Speakers + Metra 72-8104 Speaker Wire Harness Connector Compatible Fit Toyota
$339.90
$449.90
Alpine S2-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers With METRA 72-8104 Speaker Wire Harness Connector Compatible Fit for Toyota
FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade their vehicle's sound quality. This component set, with its innovative technology, makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the generally weak cone areas. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
6" x 9" Type S Series 2-Way Coaxial Car Speakers
Power Handling:
Peak: 520 watts per pair / 260 watts each
RMS: 170 watts per pair / 85 watts each
Recommended Power Range: 10 - 85 watts RMS per channel
Carbon Fiber Reinforced Plastic (CFRP) Cone
High Amplitude Multi-Roll (HAMR) Surround
1" Silk Dome Tweeter
Rubber magnet boot cover
CEA-2031 compliant speakers
35mm Voice Coil
Top-mount Depth: 2-15/16"
Cutout Dimensions: 5-29/32" x 8-3/4"
4 ohms Impedance
Frequency Response: 65 - 22000 Hz
Sensitivity: 90dB
Compatible with the Alpine KTE-S69G Grille
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S2-S69 package:
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire
Eight 1-3/16" Screws
Eight M4x60mm Machine screws
Eight M4 Nuts
8 Speed clips
16 Flat washers
8 Split lock washers
Warranty information
Online product registration information
Template and specs on the box
S-S69 owner's manual
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers
$339.90
$439.90
2 Pair Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers
Experience the rich detail and sonic excellence of Alpine’s next-generation S-Series loudspeakers — now featuring Hi-Res Audio for the first time.
The S-Series continues to establish the benchmark in sound quality and value by producing impressively detailed loudspeakers that accurately represent true studio-level Hi-Resolution audio faithful across the entire frequency bandwidth.
Alpine innovation continues with all-new technology and engineering in the construction and materials adopted in the new S-Series. The exclusive design composite glass fiber hybrid cone is extremely rigid and lightweight, which further unites with Alpine’s patented HAMR surround to achieve increased control and excursion of the woofer diaphragm, resulting in pure, punchy sound and powerful bass at high SPL.
General Features:
6" x 9" 2-way Coaxial Car Speakers
Peak Power Handling: 520 watts per pair / 260 watts each
RMS Power Handling: 170 watts per pair / 85 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
1" Silk Dome Tweeters
Large Ferrite magnet structure
Top-mount Depth: 3"
Cutout Dimensions: 5-29/32 x 8-3/4
Impedance: 4 ohms
Frequency Response: 65 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S69
1-year Manufacturer's Warranty
What is in the S2-S69 packages:
S2-S69 owner's manual
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire
Eight 1-1/8" Screws
Eight M4x60mm Machine screws
Warranty information
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers & KIT10 Installation AMP Kit
$339.90
$439.90
2 Pair Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the rich detail and sonic excellence of Alpine’s next-generation S-Series loudspeakers — now featuring Hi-Res Audio for the first time.
The S-Series continues to establish the benchmark in sound quality and value by producing impressively detailed loudspeakers that accurately represent true studio-level Hi-Resolution audio faithful across the entire frequency bandwidth.
Alpine innovation continues with all-new technology and engineering in the construction and materials adopted in the new S-Series. The exclusive design composite glass fiber hybrid cone is extremely rigid and lightweight, which further unites with Alpine’s patented HAMR surround to achieve increased control and excursion of the woofer diaphragm, resulting in pure, punchy sound and powerful bass at high SPL.
General Features:
6" x 9" 2-way Coaxial Car Speakers
Peak Power Handling: 520 watts per pair / 260 watts each
RMS Power Handling: 170 watts per pair / 85 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
1" Silk Dome Tweeters
Large Ferrite magnet structure
Top-mount Depth: 3"
Cutout Dimensions: 5-29/32 x 8-3/4
Impedance: 4 ohms
Frequency Response: 65 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S69
1-year Manufacturer's Warranty
What is in the S2-S69 packages:
S2-S69 owner's manual
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire
Eight 1-1/8" Screws
Eight M4x60mm Machine screws
Warranty information
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-SB10V Loaded 10" 600w S-W10D4 Subwoofers + Ported Sub Enclosure Box
$1,059.85
$1,400.00
2 Alpine S2-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier
Alpine S2-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S2-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. has introduced a new sound system lineup for the Halo category, which includes a 10-inch enclosure and a remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single-box design while having a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the 10-inch subwoofer is available in a single or “linked” format with an optional mounting bracket. This innovative design enables the sound consumer to add more bass to their system easily.Optimized PerformanceThe ported enclosure design delivers a higher total sound output, providing deep, powerful bass, reliable sound reproduction, and overall excellent sound quality. The 10-inch enclosure is tuned to 36 Hz; however, for optimized performance with Alpine’s S-Series and R-Series subwoofers, it is tuned to 35 Hz.General Features:
S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure
Includes S-W10D4 wired in parallel
600W RMS power handling
2Ω Impedance Ported enclosure design
Frequency response: 28-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
What is in the S-SB10V box:
Ported enclosure loaded with one S-W10D4 subwoofer driver
Rubber flange protector (installed on the subwoofer)
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo.
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 box:
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
KTX-H10 Linking Kit owner's manual
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 ALPINE S2-W10D2 10" 1800 Watt Car Audio Subwoofers Dual 2-Ohm + 8G Amp Kit
$455.90
$599.99
2 Alpine S2-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer + Absolute KIT8 8 Gauge Amp Kit
Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch models. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They feature frame leg vents, a vented back plate to aid in cooling the subwoofer's voice coil and motor parts, and a shallow design to accommodate smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals, featuring a dual voice coil jumper system, will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system gives any vehicle a clean, finished appearance.
General Features:
10" 2 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S2-W10D2 package?
S2-W10D2 owner's manual
One 10" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide
Online product registration information
Warranty Information
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 ALPINE S2-W10D2 10" 1800 Watt Car Audio Subwoofers DVC Dual 2-Ohm Subs
$479.90
$499.99
2 Alpine S2-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer
Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch models. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
10" 2 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S2-W10D2 package?
S2-W10D2 owner's manual
One 10" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide
Online product registration information
Warranty Information
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-W12D2 1800W 12" Dual 2 ohm Car Subwoofer + KTE-12G.3 Grille
$592.80
$999.99
2 Alpine S2-W12D2 1800W Max (600W RMS) 12" Type-S Series Dual 2 ohm Car Subwoofer + KTE-12G.3 Grilles
VERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications.
General Features:
12" 2 Ohm Type-S Series Subwoofer
Power Handling:
Peak: 1800 watts
RMS: 600 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 5-1/16"
Cutout diameter: 10-9"
Frequency Response: 26- 200Hz
Sensitivity: 86.2dB
Resonance Frequency (Fs): 31 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S2-W12D2 package:
Two 12" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
Important Notice!
Alpine S2-W12D2 owners manual
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-W12D2 1800W 12" Type-S Series Dual 2 ohm Car Subwoofer
$512.90
$999.99
2 Alpine S2-W12D2 1800W Max (600W RMS) 12" Type-S Series Dual 2 ohm Car Subwoofer
VERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications.
General Features:
12" 2 Ohm Type-S Series Subwoofer
Power Handling:
Peak: 1800 watts
RMS: 600 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 5-1/16"
Cutout diameter: 10-9"
Frequency Response: 26- 200Hz
Sensitivity: 86.2dB
Resonance Frequency (Fs): 31 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S2-W12D2 package:
Two 12" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
Important Notice!
Alpine S2-W12D2 owners manual
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-W8D4 Car Subwoofers 900W Max 8" S-Series Dual 4 Ohm Car Subwoofers
$419.90
$379.99
2 Alpine S2-W8D4 900W Max (300W RMS) 8" Type S Series Dual 4 Ohm Car Subwoofer
ADD BASS TO PRACTICALLY ANY VEHICLE
Don’t you think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under-seats, behind-rear bench seats in trucks, or even for some door applications.
General Features:
8" 4 Ohm Type S Series Subwoofer
Power Handling:
Peak: 900 watts
RMS: 300 watts
Recommended Power Range: 150 - 300 Watts
Kevlar Reinforced Pulp Cone
HAMR Santoprene Rubber Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Compound Radius Curve Extended Pole Geometry
Perimeter Vented Frame with Airflow Management System
10 AWG Push Terminals
35mm Underhung Voice Coils
Concealed Mount Gasket
34oz Ferrite Magnet
Top-mount depth: 3-3/4"
Cutout diameter: 6-7/8"
Frequency Response: 34-200Hz
Authorized Dealer
1-year Manufacturer's Warranty
Priced Individually
What's in the S2-W8D4 package:
Two 8" Dual 4-ohm voice coil subwoofer
Alpine S-W8D4 owner's manual
1 Rubber concealing ring
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
Important Notice!
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SBT-S10V 10" Loaded Truck Enclosures 1000W Ported Subwoofer Enclosure
$759.90
$850.00
2 Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure
With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions.
More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications. Its design works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system.
FEA Optimized Dual-Sided Machined CRC Motor Structure
Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly.
FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design
Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package
Subwoofer Features:
10" SWT Series Single 2-ohm Shallow Mount Subwoofer
Peak Power Handling: 1000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
Frequency Response: 28 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
Enclosure Features:
Ported angled / wedge-style truck enclosure
3/8" medium-density fiberboard (MDF) construction
Automotive-grade dark grey carpet
8AWG Push Terminals
Protective mesh subwoofer grilled included
Dimensions: 7"D x 22"W x 16"H
What's in the SBT-S10V package:
Ported enclosure loaded with one 10" woofer
2 Mounting plates
Six 1/2" Self-tapping screws
Owner's manual (English/ French/ Spanish)
Installation notes
Warranty information
Online product registration information
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SPE-6000 + Front & Rear Speaker Adapters + Harness For Select Honda and Acura Vehicles
$199.99
$399.99
2 Set Alpine SPE-6000 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness
Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura:
2007-2012 RDX - Front And Rear Speaker Locations
2009-2013 TL - Front And Rear Speaker Locations
2009-2013 TSX - Front And Rear Speaker Locations
Honda:
2008-2012 Accord - Front And Rear Speaker Locations
2012-2013 Crosstour - Front And Rear Speaker Locations
2010-2011 Accord Crosstour - Front And Rear Speaker Locations
2006-2013 Civic - Front And Rear Speaker Locations
2012-2013 CR-V - Front And Rear Speaker Locations
2011-2013 CR-Z - Front And Rear Speaker Locations
2010-2013 Insight - Front And Rear Speaker Locations
2011-2013 Odyssey - Front And Rear Speaker Locations
Alpine Type SPE6000 Series 6.5" Coaxial 2-Way Speaker
Alpine SPE-6000 120W 6.5" 2-Way Type-E Coaxial Car Speakers w/ Silk Tweeters
Hearing is BelievingStep up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers, for a performance-packed sound quality you expect from Alpine.Quality over QuantityJust because you want better sound in your car, doesn’t mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you simply need replacement speakers or even want to start building a sound system.Soft Dome Tweeter TechnologyTo output quality sound, the Type-E speakers are developed off of soft dome tweeters, rather than traditional cone-type tweeters which can be harsh. This results in a more enjoyable listening experience in the car when playing back your music or other entertainment over your sound system.Let Me See Your GrillOutfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function. The dark, solid protective grill is an attractive upgrade to standard factory speakers.General Features:
6-1/2" Type-E Coaxial 2-way Car Speakers
Power Handling:
Peak: 480 watts per pair / 240 watts each
RMS: 120 watts per pair / 60 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 68-20,000 Hz
Sensitivity: 88.5 dB
Top-Mount Depth: 2-3/8"
Mounting Diameter: 5-1/2"
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SPE-6000 box:
Two 2-way speakers
2 Grilles
Eight 1-3/8" Screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
SPE-6000 owner's manual
Honda Speaker Adapter Kit
Honda/Acura 6 1/2"-6 3/4" Speaker Adapters.
For Select Acura and Honda models.
Installs 6 1/2" or 6 3/4" Speakers.
Dimension: 17"Lx 10"Wx 2"H.
Weight: 0.3 Lbs.
Speaker Connector Harnesses
Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's
factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic
molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance.
The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out.
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·