Soundstream (184)

Soundstream PN5.640D Picasso Nano Series Class D 5ch Amplifier General Features: When you get your first look at Picasso Nano Amplifiers, you will realize that size really does not matter too much at all. It is amazing and quite unbelievable that such a small piece of music-amplifying equipment can have such an amazing output. What’s more, in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears.  You can install the amplifier under the front seat or the back seat, and you’ll still have enough space between the seat and the amplifier for ventilation. What’s more, the amplifier does not get heated up after a half-hour of continuous music playing at high volume. Thanks to the full-range crossovers the amplifier is equipped with, you sense no sound distortion even when the volume is turned up to the maximum. Other sport compact amplifiers use bizarre technologies with pseudo power supplies. Picasso Nanos use tried and tested MOSFET power supplies & tenacious Class D circuitry. General Features: Picasso Nano Series 5-Channel Class D Car Amplifier RMS Power Rating: 4 ohms: 60 watts x 4 channel + 200 watts RMS Power Rating: 2 ohms: 80 watts x 4 channel + 350 watts RMS Power Rating: 4 ohms, Bridged: 160 x 2 channel Max power output: 640 watts Full Pulse Width Modulated MOSFET power supply SMD technology on double-sided PCB Soft turn-on circuit Thermal and speaker short protection circuitry Dash mount remote bass level control included Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) Sensitivity: 70 dB Speaker-level (high-level) inputs Variable low-pass filter (35-250 Hz, 24 dB/octave) Subsonic filter (12 dB at 10-50 Hz) 4 gauge power and ground wiring is required for installation Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier Dimensions: 4.75"W x 10.3"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the PN5.640D package: PN5.640D owner's manual 5-channel amplifier One 40 amp ATO fuse (installed) Three 4" RCA input harnesses Three 7" Speaker level input harnesses Wired remote control 16-1/2' Remote control cable Four 5/8" Self-tapping screws Two 1/2" Self-tapping screws ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PROX4.1 5-Way Electronic Crossover Optimized for Extreme SPL Applications 4-Way Electronic Crossover with Remote Level Control Knob General Features: Dash Mounted Subwoofer Level Control Low/Sub, Mid-Low, Mid-High, High/Tweeter 8.5V Maximum RCA Output Line Driver Mute Keys on All Channels High/Tweeter Signal Processing Options: Variable 1kHz-10kHz High-Pass Crossover Mid-High Signal Processing Options: Variable 12dB 550Hz-3kHz High-Pass & 4kHz-20kHz Low-Pass Crossover Mid-Low Signal Processing Options: Variable 12dB 50Hz-400Hz High-Pass & 30Hz-5kHz Low-Pass Crossover Low/Subwoofer Signal Processing Options: Optional 3-stage 24dB Subsonic Filter Variable 50Hz-350Hz 12dB Low-Pass Crossover Dedicated 1800 Phase Inversion Switch Variable 0-12db 45Hz Bass Boost Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PSA1.4000D IP66 Waterproof Monoblock Amplifier for Powersport, Marine & Motorcycle – 4,000W Max Built for the extreme, the Soundstream PSA1.4000D is a compact powerhouse engineered to push serious bass in the toughest conditions. Purpose-built for powersport, marine, and motorcycle audio systems, this 1-ohm stable Class D monoblock amplifier delivers massive low-end performance in a durable, waterproof chassis ready for the elements. With a max output of 4,000 watts and RMS performance up to 1,300W @ 1Ω, the PSA1.4000D is designed to drive your subwoofer with clean, authoritative power. Its IP66-rated housing, military-grade PCB, and PWM MOSFET power supply ensure reliable operation in wet, muddy, and high-vibration environments — from open water to off-road. Dial in your bass response with fully variable 12dB low-pass and subsonic crossovers, plus an adjustable bass boost to enhance lower-octave impact. Advanced protection circuitry and input sensitivity up to 3V make integration smooth, safe, and system-friendly. General Features: Max Power Output: 4,000W RMS Power @ 2Ω: 900W x 1 RMS Power @ 1Ω: 1,300W x 1 (Monoblock) IP66 Waterproof Certified – Built for Harsh Environments 1-Ohm Stable Class D Amplifier for Subwoofer Applications Military-Grade PCB with PWM MOSFET Power Supply Direct Short, Thermal, & Overload Circuit Protection Low-Level RCA Inputs (200mV – 3V) Variable Low Pass Crossover: 30Hz – 180Hz (12dB) Variable Subsonic Filter: OFF – 50Hz (12dB) Variable Bass Boost: 0 – 12dB (12dB/Octave) THD: <0.05% Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PSA4.2500D IP66 Waterproof 4-Channel Powersport, Marine & Motorcycle Amplifier – 2,500W Max Built to perform wherever the road, trail, or water takes you, the Soundstream PSA4.2500D is a rugged, high-powered amplifier engineered for the toughest environments. Designed specifically for powersport, marine, and motorcycle applications, this compact powerhouse delivers clean, reliable performance with up to 2,500 watts of peak output. Featuring an IP66 waterproof rating and military-grade PCB construction, the PSA4.2500D is ready for harsh conditions — from high-humidity boat decks to dusty backtrails. It supports full-range operation at 2-ohm stereo or 4-ohm bridged, giving you flexible power for multiple speaker configurations. A robust PWM MOSFET power supply ensures stable output, while built-in circuit protections guard against shorts, overloads, and overheating. Tuning your system is a breeze with variable 12dB high-pass and low-pass crossovers, a wide input sensitivity range (200mV–8V), and low total harmonic distortion under 0.05%. Whether you're cruising the highway, riding off-road, or hitting the open water, the PSA4.2500D brings dependable, high-performance sound wherever you go. General Features: MAX Power Output: 2,500W RMS @ 4Ω: 140W x 4 – RMS @ 2Ω: 200W x 2 – RMS Bridged @ 4Ω: 400W x 2 IP66 Waterproof Rated – Built for Marine, Powersport & Motorcycle Use 2-Ohm Stereo & 4-Ohm Bridged Full-Range Operation Military-Grade PCB with PWM MOSFET Power Supply Direct Short, Thermal, & Overload Protection RCA Low-Level Inputs: 200mV – 8V Variable 12dB HPF & LPF (50Hz–500Hz) 8-Gauge Power/Ground Terminals – 18-Gauge Speaker Outputs THD: <0.05% – Frequency Response: 20Hz – 20kHz – S/N Ratio: 90dB Dimensions: 5.25" (W) x 2" (H) x 10.25" (L) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PSA5.4000D IP66 Waterproof 5-Channel Powersport, Marine & Motorcycle Amplifier – 4,000W Max Power meets precision in the Soundstream PSA5.4000D — a rugged, compact, and waterproof 5-channel amplifier built to dominate in any environment. Whether you're cruising the highway, conquering trails, or cutting through open waters, this amp is engineered for reliable high-output performance across all powersport, marine, and motorcycle applications. Delivering a massive 4,000 watts of max power, the PSA5.4000D features full-range Class D circuitry and supports 2-ohm stereo and 1-ohm mono configurations for maximum flexibility. It powers four channels of mids/highs plus a dedicated subwoofer channel, making it the ideal all-in-one amplifier for complete system builds. With IP66 waterproof protection, a military-grade PCB, and a PWM MOSFET power supply, the PSA5.4000D is built to withstand the harshest elements. Fine-tune your sound with variable crossovers, subsonic filter, bass boost, and high/low-pass filters to achieve clean, controlled output from lows to highs. General Features: Max Power Output: 4,000W RMS @ 4Ω: 100W x 4 RMS @ 2Ω: 150W x 4 + 450W x 1 RMS @ 1Ω (Sub): 650W x 1 5-Channel Design – Ideal for Full-System Setups IP66 Waterproof Chassis for Extreme Marine & Off-Road Conditions 2-Ohm Stereo & 4-Ohm Bridged Full-Range Operation Military-Grade PCB with PWM MOSFET Power Supply Direct Short, Thermal, & Overload Protection RCA Low-Level Inputs: 200mV – 8V Variable 12dB HPF & LPF (50Hz–500Hz) Variable Subsonic Filter: 10Hz–50Hz Variable Low Pass (Sub): 40Hz–250Hz Variable Bass Boost: 0–12dB 8-Gauge Power/Ground Terminals – 12-Gauge Speaker Outputs THD: <0.05% – Frequency Response: 20Hz–20kHz – S/N Ratio: 90dB Dimensions: 5.25" (W) x 2" (H) x 12.25" (L) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream RN4.1400D Rubicon Nano Series 4 Channel Amplifier General Features: We’ve adopted the most optimum Class D performance, reliability, and smaller footprint platform for the Rubicon Nano series amplifiers and present to you Rubicon Nano. At first glance, you’ll notice several key improvements; Rubicon Nano’s signal inputs, power/ground, and speaker connections are all relocated to the leading edge of the chassis for an easier, more attractive install. All pre-amp & crossover options are appropriately located on the top surface, making adjustments after installation conceivable. You might not notice embellishments to the circuit board, including increased power supply & output stage components & Monoblock bridging capability. ⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.