Soundstream (184)

Soundstream MR1.2000D Rubicon Water-Resistant Subwoofer Amplifier We’ve adopted the most optimum Class D performance, reliability, and smaller footprint platform for the Rubicon Nano series amplifiers and present to you Rubicon Nano. At first glance, you’ll notice this amplifier’s color; that’s the coat and finish to help this marinized model work for Marine or Powersports applications. Rubicon Nano’s signal inputs, power/ground, and speaker connections are all relocated to the leading edge of the chassis for an easier, more attractive install. All pre-amp & crossover options are appropriately located on the top surface, making adjustments after installation conceivable. You might not notice embellishments to the circuit board, including increased power supply & output stage components & Monoblock bridging capability. General Feature: Max Power 2,000 Watts RMS Power @ 4Ω 75W x 4 + 300W RMS Power @ 2Ω 100W x 4 + 500W RMS Bridged @ 4Ω 200W x 2 + 500W(2Ω) Remote Gain Control Included Low Pass Filter 50Hz-500Hz / (x10) 500Hz-5KHz High Pass Filter 50Hz-500Hz / (x10) 500Hz-5KHz Bass Boost 0-18dB (Ch 5) Bass Boost Frequency 45Hz (Ch 5) Subsonic Filter 20Hz-50Hz (Ch 5) Frequency Response 10Hz-50KHz (Ch 1-4) / 10Hz-150Hz. (Ch 5) S/N 104dB Input Sensitivity 200Mv-6V THD <0.05% Operation Voltage 9V-16V DC Fuse Rating 30A x 3 Dimensions (8.25″W x 2.75″H) 12″ L MR1.2000D Amplifier Rubicon Water-Resistant Subwoofer Amplifier RMS Power 4Ω 400W x 1 RMS Power 2Ω 600W x 1 RMS Power 1Ω 1,000W x 1 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream MR4.1400D Water-Resistant 1400W 4-Channel Amplifier (Boating, Off-Road) We’ve adopted the most optimum Class D performance, reliability, and smaller footprint platform for the Rubicon Nano series amplifiers and present to you Rubicon Nano. At first glance, you’ll notice this amplifier’s color; that’s the coat and finish to help this marinized model work for Marine or Powersports applications. Rubicon Nano’s signal inputs, power/ground, and speaker connections are all relocated to the leading edge of the chassis for an easier, more attractive install. All pre-amp & crossover options are appropriately located on the top surface, making adjustments after installation conceivable. You might not notice embellishments to the circuit board, including increased power supply & output stage components & Monoblock bridging capability. MR4.1400D Amplifier Rubicon Water-Resistant 4Ch Amplifier RMS Power 4Ω 125W x 4 RMS Power 2Ω 175W x 4 RMS Bridged 4Ω 350W x 2 General Feature CD/MP3, AM/FM & USB Receiver Theft Deterrent Detachable Faceplate Bluetooth V2.0 Hands-Free Calling from Enabled Phone A2DP MP3 Audio Playback from Enabled Device Playback from 32GB USB of MP3 & WMA Playback from CD, CDR, CDRW of MP3 & WMA AUX Audio Input for Personal Media Devices Front & Rear Pre-Amp Output 300w 4ch. MOSFET Speaker Outputs Custom & Pre-Set Equalizer Settings Audio Staging Controls 12/24 Hour Digital Clock Remote Control Included ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 Soundstream PF.6 Picasso Series 6.5" 2-Way Component Set Improved Efficiency Diaphragm & Magnet Structure Carbon Fiber Injection Molded Polypropylene Cone Treated Woven Cloth Surround Phase Plug Improved Dynamic Response 1” Voice Coil on Aluminum Former 4-ohm System Impedance Quick Disconnect Terminals 1” Pivoting Soft Dome Tweeter Flush or Surface Mounting Passive Crossover Included Freq-Response: 70-20kHz Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Soundstream PN1.6000DX Picasso Nano Series 6000W Monoblock 1 Channel Amplifier Unleash monster bass with total precision using the Soundstream PN1.6000DX, a heavy-hitting monoblock amplifier built for serious subwoofer control. Engineered for high-output systems, this 1-channel Class D amp delivers up to 6,000 watts max power, offering the muscle you need for competition-grade performance or extreme everyday setups. At the core of the PN1.6000DX is a MOSFET power supply that ensures clean, stable output even under demanding loads. Protect your investment with advanced 4-way protection circuitry, including safeguards against thermal overload, short circuits, over-voltage, and DC offset. Fine-tune your system with fully variable crossovers, including subsonic filtering, low-pass adjustment, and a variable 12dB bass boost at 45Hz. And for added peace of mind during setup, a clipping LED indicator gives you instant feedback to prevent distortion or speaker damage. General Features: Monoblock 1-Channel Class D Amplifier Max Power Output: 6,000W RMS Power @ 2Ω Mono: 1,000W x 1 RMS Power @ 1Ω Mono: 1,800W x 1 Clipping LED Indicator for Safe, Accurate Tuning 4-Way Protection: Short, Thermal, Overload & DC Offset Variable Crossovers: Low-Pass: 50Hz–300Hz (12dB/Octave) Subsonic Filter: 20Hz–50Hz (12dB/Octave) Bass Boost: 0–12dB @ 45Hz Phase Inversion: 0°/180° Frequency Response: 20Hz–500Hz Total Harmonic Distortion: <0.05% Signal-to-Noise Ratio: 80dB Dash-Mount Remote Gain Control Module Included Dimensions: 5.9" (W) x 1.5" (H) x 15.75" (L) RCA Low-Level & High-Level Inputs with Auto Turn-On Direct Connect Power/Ground and Speaker Terminals Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PN2.350D Picasso Nano Series Class D 2ch Amplifier General Features: SPECIFICATIONS PN2.350D Max Power 700 Watts RMS Power @ 4Ω 115W x 2 RMS Power @ 2Ω 175W x 2 RMS Bridged @ 4Ω 350W x 1 Remote Gain Control Included Low Pass Filter 35Hz-250Hz High Pass Filter 35Hz-250Hz Bass Boost 0-12dB Bass Boost Frequency 45Hz Subsonic Filter 10Hz-50Hz Frequency Response 10-300Hz S/N 104dB Input Sensitivity 200Mv-6V THD <0.1% Operation Voltage 9V-16V DC Fuse Rating N/A Dimensions (8.25″W x 2.75″H) 5.5″ L ⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.