Alpine (1168)

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, R-A75M 750-Watt Mono Amplifier, and Absolute KIT4 Package Includes: (1) Alpine R-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine R-A75M 750-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 4 Gauge Amp Kit Alpine R-SB10V Loaded 10" 750w R-W10D4 Subwoofer Ported Sub Enclosure Box Unique to Alpine, the 10-inch subwoofer is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the R-SB10V package: Ported enclosure loaded with one R-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS) The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience. The R-Series Amplifiers have a diagnostic LED behind the blue Alpine Jewell on the top of the amplifier. Blue light means the amplifier is operating normally. A red blinking light means the amplifier is too hot for operation and needs to cool down. A solid red light can mean three things: 1. The amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high. The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., Originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant. General Features: Power output 2-Ohm @ 14.4 Volts: 750 W RMS X 1 Power output 4-Ohm @ 14.4 Volts: 500 W RMS X 1 THD 10 W into 4 Ohms: Less Than 0.02% THD 10 W into 2 Ohms: Less Than 0.03% THD Rated Power 4 Ohms: Less Than 0.3% THD Rated Power 2 Ohms: Less Than 1.0% S/N Ratio: 1 W into 4 Ohms: >85dB Frequency Response: +0/-3 dB 10Hz - 400Hz Frequency Response: +0/-1 dB 15Hz - 325Hz Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V) Crossover: Variable HPF/LPF, (50Hz - 400 Hz) Dimensions: Width - 10-3/4", Height - 2", Depth - 7-7/8" Weight: 7lb What is in the R-A75M package: R-A75M Mono Amplifier 4 x M4x20 Self-Tapping Screws 8 x Mounting Bracket Screws 4 x Mounting Brackets 1 x Hexagon Wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, R-A75M 750-Watt Mono Amplifier& 4 Gauge KIT4 Amp Kit Package Includes: (1) Alpine R-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine R-A75M 750-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's Alpine R-SB10V Loaded 10" 750w R-W10D4 Subwoofer Ported Sub Enclosure Box   Unique to Alpine, the 10-inch subwoofer is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to add more bass to their system easily. Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall excellent sound quality. The 10-inch enclosure is tuned to 36 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the box: Ported enclosure loaded with one R-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS) The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience. The R-Series Amplifiers have a diagnostic LED located behind the blue Alpine Jewell on the top of the amplifier. Blue light means the amplifier is operating normally. A red blinking light means the amplifier is currently too hot for operation and needs to cool down. A solid red light can mean three things: 1. The amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high. The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., Originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant. General Features: Power output 2-Ohm @ 14.4 Volts: 750 W RMS X 1 Power output 4-Ohm @ 14.4 Volts: 500 W RMS X 1 THD 10 W into 4 Ohms: Less Than 0.02% THD 10 W into 2 Ohms: Less Than 0.03% THD Rated Power 4 Ohms: Less Than 0.3% THD Rated Power 2 Ohms: Less Than 1.0% S/N Ratio: 1 W into 4 Ohms: >85dB Frequency Response: +0/-3 dB 10Hz - 400Hz Frequency Response: +0/-1 dB 15Hz - 325Hz Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V) Crossover: Variable HPF/LPF, (50Hz - 400 Hz) Dimensions: Width - 10-3/4", Height - 2", Depth - 7-7/8" Weight: 7lb In the box: R-A75M Mono Amplifier 4 x M4x20 Self-Tapping Screws 8 x Mounting Bracket Screws 4 x Mounting Brackets 1 x Hexagon Wrench Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.     

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, R-A75M 750-Watt Mono Amplifier Package Includes: (1) Alpine R-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine R-A75M 750-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D Alpine R-SB10V Loaded 10" 750w R-W10D4 Subwoofer Ported Sub Enclosure Box Unique to Alpine, the 10-inch subwoofer is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the R-SB10V box: Ported enclosure loaded with one R-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS) The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience. The R-Series Amplifiers have a diagnostic LED located behind the blue Alpine Jewell on the top of the amplifier. Blue light means the amplifier is operating normally. A red blinking light means the amplifier is currently too hot for operation and needs to cool down. A solid red light can mean three things: 1. The amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high. The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., Originally launched in the premium X-Series amplifiers, the R-Series amplifiers produce efficient power with enhanced dynamic range, qualifying them to be Hi-Resolution Audio compliant. General Features: Power output 2-Ohm @ 14.4 Volts: 750 W RMS X 1 Power output 4-Ohm @ 14.4 Volts: 500 W RMS X 1 THD 10 W into 4 Ohms: Less Than 0.02% THD 10 W into 2 Ohms: Less Than 0.03% THD Rated Power 4 Ohms: Less Than 0.3% THD Rated Power 2 Ohms: Less Than 1.0% S/N Ratio: 1 W into 4 Ohms: >85dB Frequency Response: +0/-3 dB 10Hz - 400Hz Frequency Response: +0/-1 dB 15Hz - 325Hz Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V) Crossover: Variable HPF/LPF, (50Hz - 400 Hz) Dimensions: Width - 10-3/4", Height - 2", Depth - 7-7/8" Weight: 7lb What is in the R-A75M box: R-A75M Mono Amplifier 4 x M4x20 Self-Tapping Screws 8 x Mounting Bracket Screws 4 x Mounting Brackets 1 x Hexagon Wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine R-SB12V Pre-loaded R-Series 12-Inch Subwoofer Enclosure Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available as a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W12D4 wired in parallel 750W RMS power handling 2 Ohm Impedance Ported Enclosure Design Frequency Response: 24-200Hz Vent Tuning Frequency: 35Hz Dimensions: 17" W x 14.625" H x 15" D Authorized Dealer 1-year Warranty What is in the box: Ported enclosure loaded with one R-W12D4 subwoofer driver Rubber flange protector (installed on the subwoofer) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

                                  Alpine R2-W10D4 2250W Max (750W RMS) 10" R-Series Dual 4-Ohm Car Subwoofer The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. This cone and the Santoprene surround allow the subwoofer to deliver 19mm X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy. MORE RIGID DUST CAP Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the cap's vibration absorption while lowering its density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies. NEW POWER RATING All four R-Series subwoofers are rated at 750W RMS. They perfectly match the PDR-M65 Mono Power Density Amplifier, creating an efficient system. General Features: 10" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250 watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 111 oz. Strontium ferrite segmented magnet Top-mount depth: 5-7/8" Cutout diameter: 9-1/16" Frequency Response: 26 - 200Hz Sensitivity: 82.4dB Resonance Frequency (Fs): 30Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W10D4 package: R2-W10D4 owner's manual 10" Dual 4-ohm voice coil subwoofer 1 Rubber concealing ring  Four 3" jumper cables  R-Series Subwoofer Application Guide Online product registration information Warranty Information Important Notice! Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. https://www.alpine-usa.com/product/r-series-subwoofer-r2w10d4 https://www.youtube.com/watch?v=J8g6EZzZQyI&t=131s

Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier The Alpine “R-Series” line of speakers, subwoofers, and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.If you like loud and clear music, our Alpine R-Series R2-A150M mono amplifier is for you. It cleanly reproduces the bass in your music so you can enjoy the enhanced realism you want, even when you're playing High-Res music. We built some of our top-of-the-line amplifier technology into this R2-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.The R2-A150M mono amplifier produces up to 1200 watts RMS @ 2 Ohms, making it a perfect match for the Alpine R-Series subwoofer line. Advanced Class-D amp technology makes this powerful amp small enough to fit almost any location. You can adjust the amp's low pass, bass boost, and subsonic filter to get the right bass tone. Plus, you can add the optional RUX-KNOB2 remote bass knob to control your bass from the dash. General Features: Mono subwoofer amplifier 1500W Mono Amplifier  RMS Power Output: 700W x 1 @ 4Ω RMS Power Output: 1200W x 1 @ 2Ω RMS Power Output: 1500W x 1 @ 1Ω Class D Amplifier Circuit Preamp and speaker-level inputs Variable bass boost Power Rating: 14.4V, ≤ 1% THD +N The amp includes preamp- and speaker-level inputs Install almost any vehicle, even one with a factory radio Frequency Response: 20Hz – 400Hz S/N Ratio: >75dB optional RUX-KNOB.2 wired remote level control Dimensions: 13.5” W x 2.6” H x 7.3” D What is in the R2-A150M package: Alpine R2-A150M owner's manual Mono subwoofer amplifier Four 1" pan-head screws 3mm Allen key 2.5mm Allen key Owner's manual  Alpine Verification Certificate Warranty information Power supply note Online product registration information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-S65 (R2S65) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil, which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and a reduced footprint, which contributes to more straightforward installation. General Features: 6.5" R-Series 2-way Coaxial Car Speakers carbon-fiber-reinforced polymer (CFRP) woofer Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.48" Cutout Dimensions: 5.31" Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the R2-S65 package: R2-S65 owner's manual Two 2-way Speakers Two multi-purpose adapter rings 2 Grilles 8 Speed clips Warranty information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-Series R2-S65 6.5" & R2-S69 6x9" Car Audio Speakers Alpine Next-Generation R-Series R2-S65 6.5" 300 Watts 2-way car speakers General Features: 6.5" R-Series 2-way Coaxial Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.48" Cutout Dimensions: 5.31" Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine Next-Generation R-Series R2-S69 6"x9" 300 Watts 2-way car speakers General Features: 6" x 9" R-Series 2-way Coaxial Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.99" Cutout Dimensions: 5.86 x 8.66  Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-Series R2-S652 6.5" Component & R2-S65 6.5" Car Audio Speaker Alpine Next-Generation R-Series R2-S652 6.5" 300 Watts Component Car Audio Speaker General Features: 6.5" R-Series 2-way Component Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure  Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine Next-Generation R-Series R2-S65 6.5" 300 Watts 2-way car speakers General Features: 6.5" R-Series 2-way Coaxial Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.48" Cutout Dimensions: 5.31" Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine Next-Generation R-Series R2-S652 6.5" 300 Watts Component Car Audio Speaker If you play your music loud and want others to know, the R-Series speakers match you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, delivering power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system, and you can even choose from a Professional and Standard speaker line. General Features: 6.5" R-Series 2-way Component Car Speakers Die-Cast Aluminum Basket Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure  Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the R2-S652 package: R2-S652 owner's manual 2 Woofers 2 Bottom mount brackets 2 Woofer grilles 2 Tweeters 2 Tweeter crossovers 2 Tweeter grilles 2 Flush mount housings 2 Flush mount retention rings 2 Angled surface mount housings 2 Stealth brackets 2 Round self-adhesive pads 2 Rectangular self-adhesive pads Warranty information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-Series R2-S653 3-Way Pro 6.5" Component & R2-S65 6.5" Car Audio Speaker 2 Pair Alpine Next-Generation R-Series R2-S653 3-Way Pro 6.5" 300 Watts Component Car Audio Speaker General Features: 6.5" R-Series 3-way Component Car Speakers 6.5” Mid-Bass + 3” Mid-Range + 1” Tweeter (Component)  Die-Cast Aluminum Basket Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure  Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine Next-Generation R-Series R2-S65 6.5" 300 Watts 2-way car speakers General Features: 6.5" R-Series 2-way Coaxial Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.48" Cutout Dimensions: 5.31" Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 Alpine Next-Generation R-Series R2-S653 3-Way Pro 6.5" 300 Watts Component Car Audio Speaker If you play your music loud and want others to know, the R-Series speakers match you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, delivering power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system, and you can even choose from a Professional and Standard speaker line. General Features: 6.5" R-Series 3-way Component Car Speakers 6.5” Mid-Bass + 3” Mid-Range + 1” Tweeter (Component)  Die-Cast Aluminum Basket Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure  Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the R2-S653 package: R2-S653 owner's manual 2 6.5” Mid-Bass Speakers Woofers  2 3” Mid-Range Speakers  2 Bottom mount brackets 2 Woofer grilles 2 Tweeters 2 Tweeter crossovers 2 Tweeter grilles 2 Flush mount housings 2 Flush mount retention rings 2 Angled surface mount housings 2 Stealth brackets 2 Round self-adhesive pads 2 Rectangular self-adhesive pads Warranty information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.