00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra 99-9501B Single or Double DIN Installation Dash Kit for Select 2001-2008 Jaguar X-Type and S-Type Vehicles,Black & Metra 70-9500 Jaguar 2003-Up/Land Rover 2005-Up 20 pin Harness
$49.99
$99.99
Metra 99-9501B Single or Double DIN Installation Dash Kit for Select 2001-2008 Jaguar X-Type and S-Type Vehicles, Black & Metra 70-9500 Jaguar 2003-Up/Land Rover 2005-Up 20 pin Harness
Vehicle Compatibility:
JAGUAR S-TYPE (NON-NAV MODELS) 2008
JAGUAR S-TYPE (Non-Nav) 2005
JAGUAR X TYPE (NON NAV MODELS) 2008
JAGUAR X-TYPE 2003
JAGUAR X-TYPE(Black Dash) 2006
JAGUAR X-TYPE(Gray Dash) 2006
Kit Includes:
Radio Housing
ISO Brackets
ISO Trim Plate
DDIN Brackets
DDIN Trim Plate
Pocket
(2) Pocket C-Clips
(2) Small Phillips screws
Step-by-step instructions
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra AXDIS-MB132 Mercedes CLS/E/SLK with MOST25 Amp SWC Retention 2002-2011
$358.99
$699.99
Metra AXDIS-MB132 Mercedes CLS/E/SLK with MOST25 Amp SWC Retention 2002-2011
General Features:
Provides accessory power.
Designed for amplified models.
Provides NAV outputs (parking brake, reverse, speed sense).
Retains audio controls on the steering wheel.
Retains balance
Micro-B USB updatable
Authorized Internet Dealer
1-year Manufacturer's Warranty
Applications:
Mercedes
CLS (W211) 2006-2011
E-Class (C219) 2003-2008*
SLK (R171) 2005-2008*
*There are two different radio possibilities for the E-Class or SLK in this year's range, please see below for ways to distinguish between which interface kit you will need.
*Vehicles equipped with Command NTG1 will use the AXDIS-MB132. NTG1 radios will be built by Harman/Becker and have the 6-Disc Changer separate from the radio, if equipped with a SINGLE-disc player, it will be built into the radio. They will typically have buttons on the sides of, and below the radio screen, also the optical light will come from the fiber cable when removed.
*Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. NTG2.5 radios will be built by Alpine, and have the 6-Disc changer built into the radio. They will not have buttons directly below the radio screen, and the optical light will come from the radio when the fiber cable is removed.
Mercedes
CLS (W211) 2006-2011
E-Class (C219) 2003-2008*
SLK (R171) 2005-2008*
*There are two different radio possibilities for the E-Class or SLK in this year's range, please see below for ways to distinguish between which interface kit you will need.
*Vehicles equipped with Command NTG1 will use the AXDIS-MB132. NTG1 radios will be built by Harman/Becker and have the 6-Disc Changer separate from the radio, if equipped with a SINGLE-disc player, it will be built into the radio. They will typically have buttons on the sides of, and below the radio screen, also the optical light will come from the fiber cable when removed.
*Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. NTG2.5 radios will be built by Alpine, and have the 6-Disc changer built into the radio. They will not have buttons directly below the radio screen, and the optical light will come from the radio when the fiber cable is removed.
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra Axxess Saddle Tramp - Polaris Slingshot Data Interface 2015-up, Fits Polaris Slingshot (XSVI-9701-NAV)
$79.99
$130.00
Axxess XSVI-9701-NAV Radio Replacement Interface for 2018-2018 Polaris
Saddle Tramp is Metra's line of high-quality motorcycle accessories that will enhance your riding experience and will have you hitting the open road in style. The XSVI series interface is an inexpensive solution that provides +12-volt accessory power output for select vehicles that data control signals instead of conventional power signals. If the vehicle is equipped with retained accessory power features, the XSVI will keep those features. Also provides outputs for VSS, Reverse, and Parking Brakes.
General Features:
Radio replacement interface Compatible with 2018-2018 Polaris
connect a new stereo and keep factory functions
retains your USB port and Speed Dependent Volume Control function
Used when installing an aftermarket stereo
Retains factory USB port
Provides Nav outputs (parking brake, reverse, and speed sense)
provides parking brake, VSS (Vehicle Speed Sensor), and reverse output connections for navigation receiver installations
Pre-wired ASWC-1 harness, Axxess ASWC-1 steering wheel control retention sold separately
Only retains speed-dependent volume control
Micro B USB Updatable
Authorized Internet Dealer
Compatible Vehicles:
2018 Polaris Slingshot Grand Touring LE
2018 Polaris Slingshot S
2018 Polaris Slingshot SL
2018 Polaris Slingshot SLR
2018 Polaris Slingshot SLR LE
What's in the box:
Axxess XSVI-9701-NAV Interface Harness owner's manual
Radio replacement interface module
LD-XSVI-9701NAV harness
Installation Instructions
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra Axxess XSVI-6523-NAV XSVI Interface Dodge RAM 13-UP Wire Harness
$79.99
$119.99
Metra Axxess XSVI-6523-NAV Wiring Interface Connect a new stereo and retain Retained Accessory Power in select 2013-up Ram 1500 models without the factory touchscreen display
The XSVI-6523-NAV interface from Axxess lets you connect your new car stereo to your Ram's factory wiring harness. It provides the power, ground, and speaker connections for hooking up your new car stereo. This interface also supports Retained Accessory Power (RAP) which keeps the music going until the door is opened.If you're installing a navigation receiver, the XSVI-6523-NAV wiring interface also offers the parking brake, reverse, mute, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need. You can plug the Axxess steering wheel interface (sold separately) directly into this interface, and keep your steering wheel audio controls working with your new car stereo.
General Features:
Accessory and Navigation Interface
Compatible with 2013-2016 Ram, Chrysler, Dodge
Used in non-amplified systems or when replacing an amplified system
USB updatable
Provides parking brake, reverse, and V.S.S. NAV outputs
High-level speaker input
Retains R.A.P. (Retained Accessory Power)
Prewired Axxess ASWC-1 harness included (ASWC-1 not included)
Authorized Internet Dealer
1-year Manufacturer's Warranty
Compatibility List: Chrysler:
2015 - 2016 2001
Dodge:
2013 - 2016 Dart2
Fiat:
2014 - 2016 500L
2016 500X
Jeep:
2014 - 2016 Cherokee Sport
2015 - 2016 Renegade
RAM Truck:
2013 - 2016 1500/2500/35003
2013 - 2016 Chassis Cab 3500/4500/55003
2014 - 2016 Promaster4
2015 - 2016 Promaster City
What's in the box:
Axxess XSVI-6523-NAV Wiring Interface owner's manual
Replacement radio interface module (attached vehicle/radio/swc harness)
Application/Wiring sheet
Compatibility note:
The Axxess XSVI-6523-NAV interface will not work with Ram models that have the factory 8" touchscreen display. If the factory Alpine audio system is present, this interface can be used although new speaker wires must be run to the output section of the factory amplifier.
Compatible only with LX Model equipped with 3" Display Not compatible with 8.4" Display Not compatible with 8" Display Only compatible with 5" Display
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra Axxess XSVI-6523-NAV XSVI Interface Dodge RAM 13-UP Wire Harness
$79.99
$119.99
Metra Axxess XSVI-6523-NAV Wiring Interface Connect a new stereo and retain Retained Accessory Power in select 2013-up Ram 1500 models without the factory touchscreen display
The XSVI-6523-NAV interface from Axxess lets you connect your new car stereo to your Ram's factory wiring harness. It provides the power, ground, and speaker connections for hooking up your new car stereo. This interface also supports Retained Accessory Power (RAP) which keeps the music going until the door is opened.If you're installing a navigation receiver, the XSVI-6523-NAV wiring interface also offers the parking brake, reverse, mute, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need. You can plug the Axxess steering wheel interface (sold separately) directly into this interface, and keep your steering wheel audio controls working with your new car stereo.
General Features:
Accessory and Navigation Interface
Compatible with 2013-2016 Ram, Chrysler, Dodge
Used in non-amplified systems or when replacing an amplified system
USB updatable
Provides parking brake, reverse, and V.S.S. NAV outputs
High-level speaker input
Retains R.A.P. (Retained Accessory Power)
Prewired Axxess ASWC-1 harness included (ASWC-1 not included)
Authorized Internet Dealer
1-year Manufacturer's Warranty
Compatibility List: Chrysler:
2015 - 2016 2001
Dodge:
2013 - 2016 Dart2
Fiat:
2014 - 2016 500L
2016 500X
Jeep:
2014 - 2016 Cherokee Sport
2015 - 2016 Renegade
RAM Truck:
2013 - 2016 1500/2500/35003
2013 - 2016 Chassis Cab 3500/4500/55003
2014 - 2016 Promaster4
2015 - 2016 Promaster City
What's in the box:
Axxess XSVI-6523-NAV Wiring Interface owner's manual
Replacement radio interface module (attached vehicle/radio/swc harness)
Application/Wiring sheet
Compatibility note:
The Axxess XSVI-6523-NAV interface will not work with Ram models that have the factory 8" touchscreen display. If the factory Alpine audio system is present, this interface can be used although new speaker wires must be run to the output section of the factory amplifier.
Compatible only with LX Model equipped with 3" Display Not compatible with 8.4" Display Not compatible with 8" Display Only compatible with 5" Display
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra BC-HDR-K1 Saddle Tramp interface Harley-Davidson Street Glide 2014 -Up
$109.99
$219.99
Metra BC-HDR-K1 Saddle Tramp interface Harley-Davidson Street Glide 2014 -Up.
Upgrade your Harley-Davidson motorcycle to a larger aftermarket radio screen and retain the use of the built-in handlebar audio controls using Saddle Tramp’s installation kit. This kit is designed specifically for installing an ISO Double-DIN radio with an “L” shaped chassis design with the chassis at the top. It includes an interface with a water-resistant enclosure that allows the original factory handlebar audio controls, if equipped, to work with the new aftermarket radio. An antenna adapter is also included for a complete installation. (Radio not included). Refer to the vehicle applications tab or chart for more information.
This kit can only be used with an ISO DDIN Radio that has an “L” shaped chassis design with the chassis at the t.opGeneral Features:
Stereo installation kit designed for an ISO Double-DIN radio*
Includes an improved new interface
The Saddle Tramp interface retains built-in handlebar audio controls
Water-resistant enclosure for added protection of the interface
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Color: Black
Authorized Internet Dealer
1-year Manufacturer's Warranty
Vehicle Fitment:
Harley-Davidson®
Street Glide 2014-Up
Electra Glide 2014-Up
Ultra 2014-Up
Limited 2014-Up
Road Glide 2015-Up
Note: Non-amplified models only
What’s in the BC-HDR-K1 package:
Radio housing and brackets
Wiring harness
40-EU10 antenna adapter
Interface module with water-resistant enclosure and harness
Screws and hardware
BC-HDR-K1 Installation instructions
⚠️Warning:Cancer and Reproductive Harm
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra BC-HDR-K2 DDIN Radio Provision Harley-Davidson FLHTP (with Police Package)
$169.99
$399.99
Metra BC-HDR-K2 DDIN Radio Provision Harley-Davidson FLHTP (with Police Package).
Add an aftermarket radio to your Police Edition Harley-Davidson motorcycle using Saddle Tramp’s radio installation kit. This kit is designed specifically for installing an ISO Double-DIN radio with an “L” shaped chassis design with the chassis at the top. It includes a wiring harness and an interface with a water-resistant enclosure. If equipped with OEM handlebar audio controls, the interface will retain the use of these controls to work with the aftermarket radio. The interface also provides accessory power and integrates front and rear OEM speakers. An antenna adapter is also included for a complete installation. Refer to the vehicle applications tab or chart for more information.
General Features:
Stereo installation kit designed for an ISO Double-DIN radio*
Includes harnessing and interface
Includes one Saddle Tramp interface module to:
Retain use of OEM handlebar controls, if equipped
Provide accessory power (10-amp)
Tap into the CAN data system with the included T-harness
Add front and rear OEM speakers with the included harness with OEM connectors
Water-resistant enclosure for added protection of the interface
Includes threaded brass inserts to hold an upper metal tray
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Color: Black
Authorized Internet Dealer
1-year Manufacturer's Warranty
What’s in the BC-HDR-K2 package:
Double-DIN* radio housing and brackets
BC-9700P harness
Interface harness
Water-resistant interface
40-EU10 antenna adapter
Screws and hardware
BC-HDR-K2 Installation instructions
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra BC-HDR-K3 Single-DIN Saddle Tramp interface Harley-Davidson Street Glide 2014 -Up
$239.99
$479.99
Metra BC-HDR-K3 Saddle Tramp interface Harley-Davidson Street Glide 2014 -Up.
Upgrade your Harley-Davidson motorcycle to a larger aftermarket radio screen and retain the use of the built-in handlebar audio controls using Saddle Tramp’s installation kit. Replace the radio in your Harley-Davidson® motorcycle with a 2” tall (Single-DIN) aftermarket radio and retain the use of the built-in handlebar audio controls and other features using Saddle Tramp’s installation kit. This kit includes an interface with a water-resistant enclosure that allows the original factory handlebar audio controls, if equipped, to work with the new aftermarket radio. It also includes an LCD screen to display the oil pressure and EITMS status so you can still see this information after replacing the factory radio. An antenna adapter and harness are also included for a complete installation. (Radio not included). Refer to the vehicle applications tab or chart for more information.
General Features:
Stereo installation kit designed for an ISO Single-DIN radio*
Stereo installation kit designed for a 2” tall Single-DIN radio
Includes one Saddle Tramp interface module to:
Retain built-in handlebar audio controls
Retain balance
Provide accessory power (12-volt 10-amp)
Includes LCD screen to display oil pressure and EITMS status
Saddle Tramp interface retains built-in handlebar audio controls
Water-resistant enclosure for added protection of the interface
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Color: Black
Authorized Internet Dealer
1-year Manufacturer's Warranty
Vehicle Fitment:
Harley-Davidson®
Street Glide 2014-Up
Electra Glide 2014-Up
Ultra 2014-Up
Limited 2014-Up
Road Glide 2015-Up
Note: Non-amplified models only
What’s in the BC-HDR-K3 package:
Radio housing and brackets
Wiring harness
40-EU10 antenna adapter
Interface module with water-resistant enclosure and harness
LCD screen and back plate
Screws and hardware
Installation instructions
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra BC-HDR-K4 Single-Din Radio Provision Harley-Davidson FLHTP (with Police Package)
$249.99
$499.99
Metra BC-HDR-K4 Single-Din Radio Provision Harley-Davidson FLHTP (with Police Package)
Add a 2” tall (Single-DIN) aftermarket radio to your Police Edition Harley-Davidson® motorcycle using Saddle Tramp’s radio installation kit. This kit includes a wiring harness and an interface with a water-resistant enclosure, along with an LCD screen to display the oil pressure and EITMS status. If equipped with OEM handlebar audio controls, the interface will retain the use of these controls to work with the aftermarket radio. The interface also provides accessory power and is used to integrate front and rear OEM speakers. An antenna adapter is also included for a complete installation. Refer to the vehicle applications tab or chart for more information.
General Features:
Stereo installation kit designed for a 2” tall Single-DIN radio
Includes harnessing and interface
Includes one Saddle Tramp interface module to:
Retain use of OEM handlebar controls, if equipped
Retain balance
Provide accessory power (12-volt 10-amp)
Includes LCD screen to display oil pressure and EITMS status
Includes water-resistant enclosure for added protection of the interface
Includes threaded brass inserts to hold the upper metal tray
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions
Interface is Micro “B” USB updatable
A tech support number is available for installation help 7 days a week
Color: Black
Authorized Internet Dealer
1-year Manufacturer's Warranty
What’s in the BC-HDR-K4 package:
Single-DIN radio housing and brackets
BC-9700P harness
Interface harness
Water-resistant interface
40-EU10 antenna adapter
LCD screen and backplate
Screws and hardware
BC-HDR-K4 Installation instructions
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra Bundle Compatible with 1500 2500 3500 2013 2014 2015 2016 2017 Ram 99-6527B Single Double DIN Radio Stereo Dash Kit with Antenna Adapter
$349.99
$799.99
Metra Bundle Compatible with 1500 2500 3500 2013 2014 2015 2016 2017 Ram 99-6527B Single Double DIN Radio Stereo Dash Kit with Antenna Adapter
1 x Metra 99-6527B 2013-2019 Dodge Ram Truck Single Double DIN Radio Stereo Dash Kit and Antenna Adapter
Metra 99-6527B 2013-2019 Dodge Ram Truck Single Double DIN Radio Stereo Dash Kit
ISO DIN radio provision with pocket
ISO DDIN radio provision
Integrated 4.3-inch color touchscreen that displays the factory climate and personalization features
Retains audio controls on the steering wheel
Painted black to match the factory finish
Notes:
a) The clock and compass in the driver's information center will no longer be functional.
b) The kit does not have the ability to adjust the Active-Level™ Four Corner Air-Suspension.
c) The kit does not retain the 5th wheel camera.
d) The kit does not retain the trailer brake adjustments.
e) The kit does not retain the key fob controller settings.
Interface features
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, speed sense)
Retains audio controls on the steering wheel
Retains safety chimes
Retains the factory backup camera
Retains the factory AUX-IN jack
Can be used in amplified or non-amplified models
Retains balance and fade*
Micro-B USB updatable
Wiring and Antenna Connections Harness
Axxess interface built into the touchscreen
Antenna Adapter
Included with kit
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra Bundle Compatible with 2013 2014 2015 2016 2017 Ram Chassis Cab 3500 4500 5500 99-6527B Single/Double DIN Radio Stereo Dash Kit with Antenna Adapter
$349.99
$799.99
Metra Bundle Compatible with 2013 2014 2015 2016 2017 Ram Chassis Cab 3500 4500 5500 99-6527B Single/Double DIN Radio Stereo Dash Kit with Antenna Adapter
1 x Metra 99-6527B 2013-2019 Dodge Ram Truck Single Double DIN Radio Stereo Dash Kit and Antenna Adapter
Metra 99-6527B 2013-2019 Dodge Ram Truck Single Double DIN Radio Stereo Dash Kit
ISO DIN radio provision with pocket
ISO DDIN radio provision
Integrated 4.3-inch color touchscreen that displays the factory climate and personalization features
Retains audio controls on the steering wheel
Painted black to match the factory finish
Notes:
a) The clock and compass in the driver's information center will no longer be functional.
b) The kit does not have the ability to adjust the Active-Level™ Four Corner Air-Suspension.
c) The kit does not retain the 5th wheel camera.
d) The kit does not retain the trailer brake adjustments.
e) The kit does not retain the key fob controller settings.
Interface features
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, speed sense)
Retains audio controls on the steering wheel
Retains safety chimes
Retains the factory backup camera
Retains the factory AUX-IN jack
Can be used in amplified or non-amplified models
Retains balance and fade*
Micro-B USB updatable
Wiring and Antenna Connections Harness
Axxess interface built into the touchscreen
Antenna Adapter
Included with kit
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
METRA Bundle Compatible with 2013-2017 Ram 1500/2500/3500 Double DIN Radio Provision Matte Black Color with LC-CHRC-01 Interface Wire Harness and 40EU55 Antenna Adapter
$129.99
$249.99
2013 - 2017 RAM Double Din Car Stereo Installation Dash Kit +Harness +Antenna RAM 2013 & UP WITHOUT 8" SCREENCHEROKEE SPORT 2014 & UPCHRYSLER 200LX 2015 & UPWITH 3" SCREENMetra 95-6518B Double DIN Installation Kit for Dodge RAM 1500, 2500 & 3500 2013-Up Trucks
General Features:Allows the user to install an aftermarket Double DIN car stereo without leaving any gap between the dash and the kitFinished in scratch-proof matte blackPainted and textured to match the factory-installed interiorDesigned and manufactured with great precision tolerancesDouble DIN Installation Kit for Dodge RAM 1500, 2500 & 3500 2013-Up Trucks without factory-installed 8.4" screenMetra XSVI-6523-NAV 2013 - and Up Chrysler CAN Bus interface with Navigation outputsProvides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2013 - and Up Can-Bus Chrysler vehiclesProvides accessory output for data bus signals (12-volt 10-amp capable output)Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors openThe interface is designed to be used with factory amplified or non-amplified audio systemsRetains backup camera (if through the OE radio)Retains the use of the 3.5mm AUX jackMetra 40-EU55 for Volkswagen - BMW - European 2002 and Newer Antenna AdapterAntenna Adapter CablePowered antenna and newer "FACRA" style connector to aftermarket radioCompatibility List:Chrysler:
2015 - 2016 2001
Dodge:
2013 - 2016 Dart2
Fiat:
2014 - 2016 500L
2016 500X
Jeep:
2014 - 2016 Cherokee Sport
2015 - 2016 Renegade
RAM Truck:
2013 - 2016 1500/2500/35003
2013 - 2016 Chassis Cab 3500/4500/55003
2014 - 2016 Promaster4
2015 - 2016 Promaster City
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov