

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-S65C.2 Component System 300W MAX, 100W RMS 6.5" R-Series Component 2-Way Speakers
$429.90
$899.99
2 Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers
TURN IT UP
If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
General Features:
6.5-inch R-Series Component 2-way Car Speakers
component speaker system includes two woofers, 2 tweeters, and 2 external crossovers
Power Handling:
Peak: 300 watts
RMS: 100 watts
4 Ohms impedance
Frequency response: 65Hz-40kHz
Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology
CFRP increases the speakers’ mid-bass performance and dynamic range
CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback
Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy
Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately)
Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
2 Woofers
Two 6-1/2" Adapter rings (includes GM/Chrysler)
Two 6x8 Adapter rings
2 Woofer grilles
2 Grille badges
2 Tweeters (each has an attached 30" length of wire)
2 Tweeter grilles (installed)
2 Swivel flush mount housings (with tweeters installed)
Two crossovers (each has attached input and output wires)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-1/8" Screws
Eight 1/2" Screws
8 Speed-clips
Eight M4x12mm Machine screws
Four 5" Zip ties
2 Pieces of two-sided tape
Warranty information
Online product registration note
Important Notice sheet
Template and specs on the box
Alpine R-S65C.2 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-S65C.2 Component System
300W MAX, 100W RMS 6.5" R-Series Component 2-Way Speakers $429.90 $899.99
300W MAX, 100W RMS 6.5" R-Series Component 2-Way Speakers $429.90 $899.99
2 Pair Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers
TURN IT UP
If you play your music loud and want others to know, the R-Series speakers match you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, delivering power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
General Features:
6.5-inch R-Series Component 2-way Car Speakers
the component speaker system includes two woofers, 2 tweeters, and 2 external crossovers
Power Handling:
Peak: 300 watts
RMS: 100 watts
4 Ohms impedance
Frequency response: 65Hz-40kHz
Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology
CFRP increases the speakers’ mid-bass performance and dynamic range
CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback
Patented High-Amplitude Multi-Roll (HAMR) surround for control and accuracy
Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately)
Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
2 Woofers
Two 6-1/2" Adapter rings (includes GM/Chrysler)
Two 6x8 Adapter rings
2 Woofer grilles
2 Grille badges
2 Tweeters (each has an attached 30" length of wire)
2 Tweeter grilles (installed)
2 Swivel flush mount housings (with tweeters installed)
Two crossovers (each has attached input and output wires)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-1/8" Screws
Eight 1/2" Screws
8 Speed-clips
Eight M4x12mm Machine screws
Four 5" Zip ties
2 Pieces of two-sided tape
Warranty information
Online product registration note
Important Notice sheet
Template and specs on the box
Alpine R-S65C.2 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 ALPINE R-S69.2 300 Watt 6x9" Car Audio Coaxial 2-Way Speakers Bundle with METRA 72-7800 Speaker Connector Harness For 1986-2011 Honda Civic
$169.89
$499.99
Alpine R-S69.2 600W Peak, 200W RMS R-Series 6x9 Inch Coaxial 2-Way Speakers Bundle with METRA 72-7800 Speaker Connector Harness For 1986-2011 Honda Civic (2 items)
R-Series speakers give you power and control. With an innovative material that delivers more output, the speakers produce a dependable performance for a loud and fun experience. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output.
General Features:
Alpine R-S69.2
R-Series 6x9 Inch Coaxial 2-Way Speakers
Power Handling:
RMS: 100 Watts
Peak: 300 Watts
Impedance: 4 Ohm
Carbon-fiber reinforced polymer (CFRP) woofer
Carbon-fiber reinforced polymer dome tweeter
Frequency response: 60 Hz - 40 kHz
Sensitivity: 90 dB
Top-mount depth: 2-7/8"
Grilles included
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
Two 2-way Speakers
2 Bottom mount brackets
2 Grilles
2 Grille badges
Eight 1-1/8" Screws
Eight M4x60mm Machine screws (with split lock washers attached)
8 Split lock washers
8 Flat washers
Eight M4 Hex nuts
8 Speed clips
Warranty information
Important Notice
Online product registration information
Template and specs on the box
Alpine R-S69.2 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-S69.2 6x9 Inch Car Speaker 600W Peak, 200W RMS R-Series 6x9 Inch Coaxial 2-Way Speakers
$275.79
$549.99
2 Alpine R-S69.2 600W Peak, 200W RMS R-Series 6x9 Inch Coaxial 2-Way Speakers
R-Series speakers give you power and control. With an innovative material that delivers more output, the speakers produce a dependable performance for a loud and fun experience. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output.
General Features:
Alpine R-S69.2
R-Series 6x9 Inch Coaxial 2-Way Speakers
Power Handling:
RMS: 100 Watts
Peak: 300 Watts
Impedance: 4 Ohm
Carbon-fiber reinforced polymer (CFRP) woofer
Carbon-fiber reinforced polymer dome tweeter
Frequency response: 60 Hz - 40 kHz
Sensitivity: 90 dB
Top-mount depth: 2-7/8"
Grilles included
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
Two 2-way Speakers
2 Bottom mount brackets
2 Grilles
2 Grille badges
Eight 1-1/8" Screws
Eight M4x60mm Machine screws (with split lock washers attached)
8 Split lock washers
8 Flat washers
Eight M4 Hex nuts
8 Speed clips
Warranty information
Important Notice
Online product registration information
Template and specs on the box
Alpine R-S69.2 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-SB10V Loaded 10" 750W R-W10D4 Subwoofers + Ported Sub Enclosure Box
$1,089.85
$1,200.00
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking KitAlpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure
Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features:
Includes R-W10D4 wired in parallel
750W RMS power handling
2Ω Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Authorized Dealer
1-year Warranty
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 package:
KTX-H10 Linking Kit owner's manual
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit
$1,080.85
$1,200.00
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit
Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure
Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features:
Includes R-W10D4 wired in parallel
750W RMS power handling
2Ω Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Authorized Dealer
1-year Warranty
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 box:
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
KTX-H10 Linking Kit owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers + Ported Sub Enclosure Box
$1,280.85
$1,400.00
(2) Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers+Ported Sub Enclosure Box
Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily.The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features:
Includes R-W12D4 wired in parallel
750W RMS power handling
2 Ohm Impedance
Ported Enclosure Design
Frequency Response: 24-200Hz
Vent Tuning Frequency: 35Hz
Dimensions: 17" W x 14.625" H x 15" D
Authorized Dealer
1-year Warranty
What is in the R-W12D4 package:
Ported enclosure loaded with one R-W12D4 subwoofer driver
Rubber flange protector (installed on the subwoofer)
Alpine KTX-H12 Linking KitWhen it comes to bass, two is always better than one. Alpine's KTX-H12 linking kit allows you to connect two Alpine S-SB12V or R-SB12V 12" subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to connect the enclosures and all the necessary hardware securely. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year.What is in the KTX-H12 package:
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers+Ported Sub Enclosure Box
$1,280.85
$1,400.00
2 Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers+Ported Sub Enclosure Box
Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily.The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features:
Includes R-W12D4 wired in parallel
750W RMS power handling
2 Ohm Impedance
Ported Enclosure Design
Frequency Response: 24-200Hz
Vent Tuning Frequency: 35Hz
Dimensions: 17" W x 14.625" H x 15" D
Authorized Dealer
1-year Warranty
What is in the box:
Ported enclosure loaded with one R-W12D4 subwoofer driver
Rubber flange protector (installed on the subwoofer)
Alpine KTX-H12 Linking KitWhen it comes to bass, two is always better than one. Alpine's KTX-H12 linking kit allows you to connect two Alpine S-SB12V or R-SB12V 12" subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to securely connect the enclosures and all the hardware you'll need. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year.What is in the KTX-H12 package:
KTX-H12 Installation instructions
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W10D2 10" Type-R 2250w Dual 2-Ohm Car Audio Subwoofers Subs
$626.90
$899.95
2 Alpine R2-W10D2 2250W Max (750W RMS) 10" R-Series Dual 2-Ohm Car Subwoofer
The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLY R-Series subwoofers feature a Kevlar-treated cone for durability. The combination of this cone with the Santoprene surround allows the subwoofer to deliver 19mm of X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy.
MORE RIGID DUST CAP
Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the vibration absorption of the cap while lowering the density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies.
NEW POWER RATING
All four R-Series subwoofers are rated at 750W RMS. These subwoofers perfectly match the PDR-M65 Mono Power Density Amplifier to create a system that works efficiently together.
General Features:
10" Dual 2 ohm Type-R Subwoofer
Power Handling:
Peak: 2250watts
RMS: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
111 oz. Strontium ferrite segmented magnet
Top-mount depth: 5-7/8"
Cutout diameter: 9-1/16"
Frequency Response: 26 - 200Hz
Sensitivity: 82.4dB
Resonance Frequency (Fs): 30Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W10D2 package:
R2-W10D2 owner's manual
One 10" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
Important Notice!
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W10D2 10" Type-R Car Audio Subwoofers Subs
$626.90
$899.95
2 Alpine R2-W10D2 2250W Max (750W RMS) 10" R-Series Dual 2-Ohm Car Subwoofer
The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. The combination of this cone with the Santoprene surround allows the subwoofer to deliver 19mm of X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy.
MORE RIGID DUST CAP
Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the vibration absorption of the cap while lowering the density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies.
NEW POWER RATING
All four R-Series subwoofers are rated at 750W RMS. These subwoofers perfectly match the PDR-M65 Mono Power Density Amplifier to create a system that works efficiently together.
General Features:
10" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
111 oz. Strontium ferrite segmented magnet
Top-mount depth: 5-7/8"
Cutout diameter: 9-1/16"
Frequency Response: 26 - 200Hz
Sensitivity: 82.4dB
Resonance Frequency (Fs): 30Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W10D2 package:
2- R2-W10D2 owner's manual
Two 10" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Four 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
Important Notice!
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W10D2 2250W Max (750W RMS) 10" R-Series Dual 2-Ohm Car Subwoofer
$626.90
$899.95
2 Alpine R2-W10D2 2250W Max (750W RMS) 10" R-Series Dual 2-Ohm Car Subwoofer
The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. The combination of this cone with the Santoprene surround allows the subwoofer to deliver 19mm of X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy.
MORE RIGID DUST CAP
Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the vibration absorption of the cap while lowering the density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies.
NEW POWER RATING
All four R-Series subwoofers are rated at 750W RMS. These subwoofers perfectly match the PDR-M65 Mono Power Density Amplifier to create a system that works efficiently together.
General Features:
10" Dual 2 ohm Type-R Subwoofer
Power Handling:
Peak: 2250watts
RMS: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
111 oz. Strontium ferrite segmented magnet
Top-mount depth: 5-7/8"
Cutout diameter: 9-1/16"
Frequency Response: 26 - 200Hz
Sensitivity: 82.4dB
Resonance Frequency (Fs): 30Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W10D2 package:
R-W10D2 owner's manual
One 10" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
Important Notice!
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W10D4 10" R-Series next generation 4 Ohm 2250 Max DVC Car Audio Subwoofer + KTE-10G.3 Grills
$718.70
$999.99
2 Alpine R2-W10D4 10" R-Series next generation 4 Ohm 2250 Max, 750W RMS DVC Car Audio Subwoofer + KTE-10G.3 Grills
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
10" Dual 4 ohms Type-R Series Series Subwoofer
RMS Power Handling: 750 watts
Peak Power Handling: 2250 watts
Kevlar Reinforced Pulp Paper Cone
High-Amplitude Multi-Roll (H.A.M.R) Surround
Push-Type Speaker Terminals (Up To 8AWG Wire Size)
Oversized Dust Cap
2.6" High-Temperature Voice coil
20 mm Xmax
123 oz. Double Stacked Ferrite magnet motor structure
Frequency Response: 26 - 200 Hz
Resonance Frequency (Fs): 32 Hz
Sensitivity: 82.8 dB
Sealed box volume: .4 cubic feet - .85 cubic feet
Ported box volume: .75 cubic feet - 1.3 cubic feet
Top-mount depth: 6"
Cutout diameter: 9.6"
CTA-2031 Compliant: Yes
Authorized Internet Dealer
Alpine KTE-10G Optional Protective subwoofer grille
1-year Manufacturer's Warranty
What is in the R2-W10D4 package:
R2-W10D4 owner's manual
One 10" Dual 4-ohm voice coil subwoofer
Plastic trim ring
Two 4.5" jumper wires
Application guide
Online product registration information
Warranty Information
Important Notice
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.