alpine (1200)

Alpine 2- S2-W12D4 12" S-Series Dual 4 Ohm Car Subwoofer & (2) KTE-12G.3 Grille Bundle Alpine S2-W12D4 - Next-Generation 12” S-Series Subwoofer with Dual 4-Ohm Voice Coils - Add extra punch to your sound system with the S-Series S2-W12D4 12" Subwoofer; now redesigned for powerful and reliable bass performance at an approachable price point. PERFORMANCE & VALUE With an impressive power handling of 600W RMS and a peak power handling of 1800W, the Next-Gen 12” S-Series Subwoofers deliver outstanding performance value. Boasting a wide frequency response range of 23Hz to 215Hz and a sensitivity of 86dB (1W/1m), these subs ensure powerful and accurate bass reproduction across diverse music genres.  ENHANCED PUNCH Featuring the lightweight yet sturdy combination of carbon fiber and polypropylene, the Next-Gen S-Series Subwoofer cone delivers deep, low-distortion bass that enhances the depth and richness of your music. FLEXIBLE APPLICATION A Dual Voice Coil (DVC) with easy configuration jumpers make installing the S-Series subwoofers a breeze. A new twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. PERFECT POWER MATCH Maximize the potential of your S-Series subwoofers with Alpine's perfectly power-matched S-Series amps. Power a single S2-W12D4 subwoofer effortlessly with the 600W S2-A60M mono amplifier, or for an even bigger impact, pair two or more S2-W12D4 subs with the powerful 1200W S2-A120M amp to ensure optimal sound quality and performance. FEATURES Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals Alpine KTE-12G.3 Grille for 12" Type-R and Type-S subwoofers S2-W12: Powerful and Reliable Bass: Upgrade your sound system with the Alpine S2-W12D4 Subwoofer, designed for robust and reliable bass performance at a wallet-friendly price point. S2-W12: Versatile Performance: Boasting an impressive power handling of 600W RMS and 1800W peak, the Next-Gen 12” S-Series Subwoofer delivers outstanding performance value. With a wide frequency response range of 23Hz to 215Hz and a sensitivity of 86.2dB (1W/1m), enjoy powerful and accurate bass across various music genres. S2-W12: Deep, Distortion-Free Sound: Experience enhanced depth and richness in your music thanks to the lightweight yet sturdy combination of carbon fiber and polypropylene cone in the Next-Gen S-Series Subwoofer, providing deep and low-distortion bass. S2-W12: Easy Installation and Protection: The Dual Voice Coil (DVC) with easy configuration jumpers ensures a hassle-free installation. The twist-lock grille mounting system makes adding or removing an optional grille a breeze, providing added protection to the cone. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S-S50 5.25" S-Series S-S50 2-Way Coaxial Speakers with TW500 & Mobile Bracket & Electrical Tape Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5 1/4inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Power Handling: Peak: 340 watts per pair / 170 watts each RMS: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S-S50 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

It features high and low pass filters, a 0-12dB bass boost, and an aluminum heatsink for optimal performance. For the car speakers XED62 6.5" 2-Way Coaxial Car Speakers  Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. It's a great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the BBX-F1200 package: BBX-F1200 owner's manual Four-Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Cerwin-Vega Mobile XED62 300W 6.5" XED Series 2-Way Coaxial Car Speakers Look no further than Cerwin-Vega Mobile speakers for the best live concert experience and distortion-free performance. They utilize high-energy and high-tolerance components to achieve the best reproduction of music. This pair of XED 6-1 2 in. 300-Watt 2-Way Coaxial Speakers features curvilinear poly cones, butyl rubber surrounds, and balanced metal dome 3 4 in. CV tweeters. They will also work with a piezo 1" add-on tweeter kit sold separately. Cerwin-Vega Mobile speakers deliver to almost any application for maximum sonic performance and precision studio playback.General Features: 6.5" 2-Way Coaxial Car Speakers Power Handling: Peak: 300 watts Curvilinear polypropylene cone Butyl rubber surround .75" balanced metal dome tweeter Frequency Response: 60 - 18000 Hz Top-mount Depth: 2.2" Mounting diameter: 4.96" Sensitivity: 94dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine Type-S Speaker and Amp Bundle 6.5" S2-S65C Component Set S2-S65 Coaxials with S2-A36F Amplifier & Absolue KIT4 This bundle includes an Alpine S2-36F Amplifier, a pair of Alpine S2-S65C S-Series 6.5-inch Component 2-way Speakers, a pair of Alpine S2-S65 S-Series 6.5-inch Coaxial 2-way Speakers, and a wiring kit. Alpine S2-A36F S-Series 360W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. The S2-A36F 4-channel amplifier offers hard-hitting bass and long hours of limitless play. These amplifiers offer great value with over 20% more power through increased watt handling. They support exceptional strength and resistance by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S2-A36F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice regarding performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 60W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 90W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 180W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contains technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information Alpine S2-S65C & S2-S65 6.5" SpeakersThe new S-Series cosmetics look good in nearly any car, and their shallow mounting design allows for easy installation in a wide range of door panels. Their high-efficiency design can also run off of the power from the factory or Alpine head unit, resulting in an easy system improvement for any vehicle.CEA-2031 Speaker rating: 80W maximum RMS, 240W peak power handling, nominal impedance 4Frequency response: 70Hz - 22kHz6-1/2" 2-way component & Coaxial speakerscarbon-fiber-reinforced plastic woofer cone with specialized rubber surround3/4" silk dome tweetersensitivity: 88 dBmounting diameter: 5 1/16"mounting depth: 2-5/16"grills not includedwarranty: 1 year Warning: This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine AL16 AL-16 Alpine 16 PIN Radio Car Stereo Plug Harness Replacing an Aftermarket Radio harnessThe right harness for the right radio, Please be sure to review the application guide below for this harness as it will fit multiple radio models. This harness is a 16 pin model please be sure to review the image of the pin configuration and compare it to the plug socket on your radio to ensure it's a match.Fits: Suits most Alpine car audio units with with 16pin connector CDA-105Ri, CDA-7865R, CDA-7873R, CDA-7876RB, CDA-7893R, CDA-7894RB, CDA-9807, CDA-9811R, CDA-9812RB, CDA-9812RR, CDA-9813R, CDA-9815RB, CDA-9833R, CDA-9835R, CDA-9847R, CDA-9853R, CDA-9854R, CDA-9855R, CDA-9856R, CDA-9883R, CDA-9886R, CDA-9887R, CDE-101E, CDE-101R, CDE-7854R, CDE-7854RM, CDE-7855RB, CDE-7857RB, CDE-9841R, CDE-9843RM, CDE-9845RB, CDE-9846R, CDE-9846RM, CDE-9848RB, CDE-9850Ri, CDE-9864R, CDE-9872R, CDE-9873RB, CDE-9880R, CDE-9881RB, CDE-9882Ri, CDM-7892R, iDA-X100, iDA-X200, iDA-X300, iDA-X303, iDA-X305, TDA-7588RB and many others. If you are unsure or if you need help finding an item not listed feel free to send us your question.Plug & Play Installation General Features: Simply plug and play installation Clearly marked color-coded wires Ideal for any aftermarket radio 18 gauge high-quality wire Direct OEM fit connection 16 Pin harness Application Guide: Alpine CDA-105 Alpine CDA-105E Alpine CDA-105L Alpine CDA-117 Alpine CDA-117E Alpine CDA-7862 Alpine CDA-7863 Alpine CDA-7864 Alpine CDA-7873 Alpine CDA-7875 Alpine CDA-7876 Alpine CDA-7892 Alpine CDA-7893 Alpine CDA-7894 Alpine CDA-78965 Alpine CDA-7897 Alpine CDA-7965 Alpine CDA-7977 Alpine CDA-7995 Alpine CDA-7998 Alpine CDA-9813 Alpine CDA-9815 Alpine CDA-9833 Alpine CDA-9835 Alpine CDA-9847 Alpine CDA-9851 Alpine CDA-9853 Alpine CDA-9855 Alpine CDA-9856 Alpine CDA-9857 Alpine CDA--9870 Alpine CDA--9872 Alpine CDA--9873 Alpine CDA--9881 Alpine CDA-9883 Alpine CDA-9883E Alpine CDA-9884 Alpine CDA-9884E Alpine CDA-9884LI Alpine CDA-9885 Alpine CDA-9885L Alpine CDA-9886 Alpine CDA-9886M Alpine CDA-9887 Alpine CDE-102 Alpine CDE-102E Alpine CDE-102L Alpine CDE-103BT Alpine CDE-121 Alpine CDE-122 Alpine CDE-123 Alpine CDE-123E Alpine CDE-124SXM Alpine CDE-125BT Alpine CDE-125EBT Alpine CDE-126BT Alpine CDE-9841 Alpine CDE--9841 Alpine CDE-9842 Alpine CDE-9842E Alpine CDE-9843 Alpine CDE--9843 Alpine CDE-9845 Alpine CDE--9845 Alpine CDE-9852 Alpine CDE-9870 Alpine CDE-9870L Alpine CDE-9872 Alpine CDE-9872E Alpine CDE-9872L Alpine CDE-9873 Alpine CDE-9874 Alpine CDE-9874E Alpine CDE-9874L Alpine CDE-9881 Alpine CDE-9881L Alpine DVA-9860 Alpine DVA-9860E Alpine CDE-9846 Alpine iDA-X001 Alpine iDA-X100 Alpine iDA-X100M Alpine iDA-X200 Alpine iDA-X300 Alpine iDA-X303 Alpine iDA-X305 Alpine IVA-D300 Alpine IVA-D310 Alpine IVA-D901 Alpine VPA-B222 Alpine IVA-D100 ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine AL16 AL-16 Alpine 16 PIN Radio Car Stereo Plug Harness Replacing an Aftermarket Radio harnessThe right harness for the right radio, Please be sure to review the application guide below for this harness as it will fit multiple radio models. This harness is a 16 pin model please be sure to review the image of the pin configuration and compare it to the plug socket on your radio to ensure it's a match.Fits: Suits most Alpine car audio units with with 16pin connector CDA-105Ri, CDA-7865R, CDA-7873R, CDA-7876RB, CDA-7893R, CDA-7894RB, CDA-9807, CDA-9811R, CDA-9812RB, CDA-9812RR, CDA-9813R, CDA-9815RB, CDA-9833R, CDA-9835R, CDA-9847R, CDA-9853R, CDA-9854R, CDA-9855R, CDA-9856R, CDA-9883R, CDA-9886R, CDA-9887R, CDE-101E, CDE-101R, CDE-7854R, CDE-7854RM, CDE-7855RB, CDE-7857RB, CDE-9841R, CDE-9843RM, CDE-9845RB, CDE-9846R, CDE-9846RM, CDE-9848RB, CDE-9850Ri, CDE-9864R, CDE-9872R, CDE-9873RB, CDE-9880R, CDE-9881RB, CDE-9882Ri, CDM-7892R, iDA-X100, iDA-X200, iDA-X300, iDA-X303, iDA-X305, TDA-7588RB and many others. If you are unsure or if you need help finding an item not listed feel free to send us your question.Plug & Play Installation General Features: Simply plug and play installation Clearly marked color-coded wires Ideal for any aftermarket radio 18 gauge high-quality wire Direct OEM fit connection 16 Pin harness Application Guide: Alpine CDA-105 Alpine CDA-105E Alpine CDA-105L Alpine CDA-117 Alpine CDA-117E Alpine CDA-7862 Alpine CDA-7863 Alpine CDA-7864 Alpine CDA-7873 Alpine CDA-7875 Alpine CDA-7876 Alpine CDA-7892 Alpine CDA-7893 Alpine CDA-7894 Alpine CDA-78965 Alpine CDA-7897 Alpine CDA-7965 Alpine CDA-7977 Alpine CDA-7995 Alpine CDA-7998 Alpine CDA-9813 Alpine CDA-9815 Alpine CDA-9833 Alpine CDA-9835 Alpine CDA-9847 Alpine CDA-9851 Alpine CDA-9853 Alpine CDA-9855 Alpine CDA-9856 Alpine CDA-9857 Alpine CDA--9870 Alpine CDA--9872 Alpine CDA--9873 Alpine CDA--9881 Alpine CDA-9883 Alpine CDA-9883E Alpine CDA-9884 Alpine CDA-9884E Alpine CDA-9884LI Alpine CDA-9885 Alpine CDA-9885L Alpine CDA-9886 Alpine CDA-9886M Alpine CDA-9887 Alpine CDE-102 Alpine CDE-102E Alpine CDE-102L Alpine CDE-103BT Alpine CDE-121 Alpine CDE-122 Alpine CDE-123 Alpine CDE-123E Alpine CDE-124SXM Alpine CDE-125BT Alpine CDE-125EBT Alpine CDE-126BT Alpine CDE-9841 Alpine CDE--9841 Alpine CDE-9842 Alpine CDE-9842E Alpine CDE-9843 Alpine CDE--9843 Alpine CDE-9845 Alpine CDE--9845 Alpine CDE-9852 Alpine CDE-9870 Alpine CDE-9870L Alpine CDE-9872 Alpine CDE-9872E Alpine CDE-9872L Alpine CDE-9873 Alpine CDE-9874 Alpine CDE-9874E Alpine CDE-9874L Alpine CDE-9881 Alpine CDE-9881L Alpine DVA-9860 Alpine DVA-9860E Alpine CDE-9846 Alpine iDA-X001 Alpine iDA-X100 Alpine iDA-X100M Alpine iDA-X200 Alpine iDA-X300 Alpine iDA-X303 Alpine iDA-X305 Alpine IVA-D300 Alpine IVA-D310 Alpine IVA-D901 Alpine VPA-B222 Alpine IVA-D100 ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine Electronics ALP-HRN-CAMCH Camera Input Harness for The HCE-TCAM1-WRA, Rear View Camera System & 2007-2017 Jeep Wrangler Factory Display The ALP-HRN-CAMCH Wrangler JK-specific custom harness is the correct length (4-foot RCA Input Cable) to reach down to the passenger side kick panel where the connection is made. It is a perfect match for the Jeep Wrangler-specific Spare Tire Rear View Camera System (HCE-TCAM1-WRA). It also works with any Alpine rear view camera system that has a universal connection, like the HCE-C114, HCE-C125, or the HCE-C305R. After installation, the factory radio will require programming to activate the camera input. Programming to open the camera input required by your local Jeep dealership. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier + Amp Kit Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.