audiocontrol (76)

Audiocontrol 3 Pin 3-pin power plug for Audio Control, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Audiocontrol 3 Pin These 3-pin connectors are used on our car and home products. If you’ve lost your connector, or if you like to collect small, interesting objects, you’ve found the right page. Check your product to see which connector you need, either 3-pin, then add as many as you like to your cart. Postage is included when shipping within the Contiguous United States. 3 Pin, 3-pin power plug (Black) for Audio Control, Audiocontrol, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audiocontrol 3 Pin 3-pin power plug for Audio Control, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Audiocontrol 3 Pin These 3-pin connectors are used on our car and home products. If you’ve lost your connector, or if you like to collect small, interesting objects, you’ve found the right page. Check your product to see which connector you need, either 3-pin, then add as many as you like to your cart. Postage is included when shipping within the Contiguous United States. 3 Pin, 3-pin power plug (Black) for Audio Control, Audiocontrol, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audio Control D-4.800 D Series 4-channel car amplifier with digital signal processing — 125 watts x 4 Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's D-4.800 4-channel amplifier generates 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. You could also bridge the D-4.800 to drive a couple subwoofers with 400 watts RMS each. General Features: 4-channel car amplifier with digital signal processing 125 watts RMS x 4 at 4 ohms (200 watts RMS x 4 at 2 ohms) 400 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) all controls and adjustments made with the AudioControl Smart-User DSP app on your laptop (PC or Mac) via USB connection optional AC-BT25 Bluetooth adapter available variable high- and low-pass filters (20-20,000 Hz at 12 or 24 dB/octave) AccuBASS circuitry for improved bass response 30-band graphic EQ, parametric filters, phase correction time delay/alignment for inputs and outputs RTA (real-time analyzers) for inputs and outputs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC-5.1300 5-channel car amplifier — 100 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohms Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's LC-5.1300 five-channel amplifier puts out 100 watts RMS to four channels and up to 500 watts RMS to a sub. If you're into mega-power, competition-type systems, you could bridge this amp to 3-channel mode and drive a couple of high-performance components with 400 watts RMS each while powering a sub with 500 watts RMS — that's 1300 watts in total. General Features: 5-channel car amplifier 100 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms 200 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms 400 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms Class D amp technology MILC™ (Maximum Input Level Control) LED optimization and clip indicators stereo/mono switch on channel pairs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control DM-RTA 5 in 1 Signal Analyzer and Multi-Test Tool General Features: Test and Measure Any Signal Balanced Line Level Inputs and Outputs Unbalanced Line Level Inputs and Outputs Speaker Level Inputs (handles up to 400 watts) Microphone Input with 48V Phantom Power (microphone sold separately) Microphone presets (for CM-10, CM-20 & C550H) Digital and USB Outputs Connect to PC/Mac, Phone or Tablet Option Port for Bluetooth Connectivity Battery Powered and Compact for Portability DM-RTA app available in downloads for Mac/PC or iPhone/Android Battery Life: ~5 Hours Dimensions: 8” W x 4.8” D x 2.4” H Weight: 2.6lbs (1.2kg) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control EQL 2-Channel Trunk Mount Dual Bandwidth Graphic Equalizer and Pre-Amp  The EQL works wonders with any 2 channel audio system: From existing factory installed setups to custom audiophile-grade systems. Level-matching circuitry allows connection to either preamp-level or speaker-level inputs. The EQL also features thirteen-band, dual-bandwidth equalization and a Programmable Frequency Match (PFM) filter for precise bass control.The dual bandwidth design of the EQL concentrates more control in the lower bass frequencies where the interior of an automobile causes problems. The higher frequency controls are spaced on octave centers to give you complete control up to 16,000 Hz. No simple dash-mount equalizer gives you this kind of flexibility. General Features: Trunk Mount Equalizer and Pre-Amp 6 Band, 1/2 Octave Bass EQ 7 Band, 1 Octave Equalizer Programmable Frequency Match (PFM) Subsonic Filter Line and Speaker Level Inputs Balanced Inputs Input and Output Level Matching Controls Color: Black Blue Weight: 3 lbs Dimensions: 1.25" H x 8.9" L x 6.9" W Frequency Response: 10 Hz to 20 kHz ± 1 dB Total Harmonic Distortion (THD): 0.005% Signal to Noise Ratio (SNR): 110 dB at full output Maximum Output Level: 7.5 volts rms Input Gain: ± 18 dB PFM Filter Slope: 18 dB per octave PFM Frequency: Programmable 15 to 100 Hz Factory Shipped @ 33Hz Power Supply: Variable isolation. Transformer switching supply Fuse Rating: 2 amps Balanced Input Yes Ground Isolation Jumpers: Yes Country of origin: USA ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC1i Active 2-channel line driver/output converter Aftermarket amplifiers and DSP sound processors need clean and strong input signals, whether they come from a receiver's RCA outputs or a factory amp's speaker outputs. AudioControl's LC1i line output converter can produce up to 9.5 volts of preamp-level output in either case, acting as a line driver using its RCA inputs or as a line output converter using the speaker-level inputs. General Features: active 2-channel line driver/output converter designed to work with aftermarket and factory systems provides up to 9.5 Vrms output preamp and speaker-level inputs auto turn-on via DC offset or audio detect level control and Maximized LED indicator Other Features: load selection switch for OEM integration (20, 60, or 20,000 ohms) 12-volt turn-on lead output speaker-level inputs feature switchable load resistance to prevent factory stereo shut-down wiring, fuse, and hardware are not included with the device ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound. What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.