Peavey (213)

Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD and EQ preset and other DSP operating parameters are accessed via a one-knob selector—full-coverage heavy-duty perforated steel grilles with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals. General Features: Two-way bi-amped sound reinforcement enclosure RX™10 compression driver, with 1-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 520W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top and bottom flying point inserts 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 34.18 lb (15.5 kg) Packed Length: 22.441" (57 cm) Packed Width: 15.945" (40.5 cm) Packed Height: 14.37" (36.5 cm)   Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP10 DSP 10-inch Powered Speaker 520W 10" Powered Speaker with 1" Compression Driver+ 2 MR DJ USA 6 Feet XLR Cable Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector—full-coverage heavy-duty perforated steel grilles with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals. General Features: Two-way bi-amped sound reinforcement enclosure RX™10 compression driver, with 1-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 520W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top and bottom flying point inserts 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 34.18 lb (15.5 kg) Packed Length: 22.441" (57 cm) Packed Width: 15.945" (40.5 cm) Packed Height: 14.37" (36.5 cm)   Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP10 DSP 10 inch Powered Speaker 520W 10" Powered Speaker with 1" Compression Driver,+ MR DJ USA SS350 Speaker Stand Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector—full-coverage heavy-duty perforated steel grilles with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals. General Features: Two-way bi-amped sound reinforcement enclosure RX™10 compression driver, with 1-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 520W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top and bottom flying point inserts 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 34.18 lb (15.5 kg) Packed Length: 22.441" (57 cm) Packed Width: 15.945" (40.5 cm) Packed Height: 14.37" (36.5 cm)   Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector—full-coverage heavy-duty perforated steel grilles with powder coat finish. DSP I/O is 48 kHz and 24 bits; internal processing is 56-bit double-precision: Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals. General Features: Two-way bi-amped sound reinforcement enclosure RX™10 compression driver, with 1-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 520W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top and bottom flying point inserts 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 34.18 lb (15.5 kg) Packed Length: 22.441" (57 cm) Packed Width: 15.945" (40.5 cm) Packed Height: 14.37" (36.5 cm)   Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXp 15-inch 980-watt Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The PVXp 15 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the speaker RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be lit when power is on and the "soft-limiting" DDT circuit is activated or turned off. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: 15" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver + 2 MR DJ USA 6 Feet XLR Cable Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ MR DJ USA SS350 Speaker Stand Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXp 15-inch 980-watt Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The PVXp 15 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the speaker RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be lit when power is on and the "soft-limiting" DDT circuit is activated or turned off. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: 15" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP15 DSP Bluetooth 15" 980W Powered Speaker 1.4" Driver+ 2 MR DJ XLR6 6' XLR Cable Peavey PVXp 15-inch 980-watt Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The PVXp 15 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the speaker RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be lit when power is on and the "soft-limiting" DDT circuit is activated or turned off. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: 15" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.