00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SWT-10S2 10" 1000W Shallow Slim Subwoofer + AudioControl Epicenter Bass Processor
$549.99
$999.99
2 Alpine SWT-10S2 10" 1000W Peak/350W RMS Shallow Slim Truck Car Subwoofer Bundle with AudioControl The Epicenter Black Digital Car Bass Processor with Remote Audio Control
Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features:
10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What's in the SWT-10S2 package:
SWT-10S2 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote
Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave.
Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.
General Features:
Active Epicenter Series 2 channel digital bass restoration and line output converter
Designed to integrate with after-market or factory OEM systems
Digital bass restoration restores bass roll-off in factory systems
Speaker level inputs
Bass/Gain level remote: Yes
Signal-Sensing turn-on: Yes
Preamp outputs: 1 pair
Bass Maximizer circuitry
Multiple turn-on options
PFM Subsonic Filter bypass option
Selectable impedance load: 20, 60, 20k ohms
Frequency response: 10 - 100,000 Hz
Subsonic filter: 20 Hz, 12/dB octave
Signal-to-noise ratio: >130 dB
Total harmonic distortion (THD): 0.003%
Fuse Rating: 1A x 1
Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H
Weight: 1.70lbs
Authorized Internet Dealer
5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer)
What is in the THE EPICENTER package:
The Epicenter owner's manual
Pre-amp Bass Restoration Processor black
Remote dash mount control
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SWT-10S2 Car Subwoofer 1000W 10" Single 2-ohm Shallow Mount Subwoofer
$439.90
$799.99
Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features:
10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S2 package:
SWT-10S2 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SWT-10S4 10" 1000W Car Subwoofers + AudioControl THE EPICENTER White Bass Processor
$549.99
$999.99
2) Alpine SWT-10S4 10" 1000W Shallow Slim Subwoofers + AudioControl The Epicenter White Bass Processor
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
Audio Control THE EPICENTER White 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote
Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave.
Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.
General Features:
Active Epicenter Series 2 channel digital bass restoration and line output converter
Designed to integrate with after-market or factory OEM systems
Digital bass restoration restores bass roll-off in factory systems
Speaker level inputs
Bass/Gain level remote: Yes
Signal-Sensing turn-on: Yes
Preamp outputs: 1 pair
Bass Maximizer circuitry
Multiple turn-on options
PFM Subsonic Filter bypass option
Selectable impedance load: 20, 60, 20k ohms
Frequency response: 10 - 100,000 Hz
Subsonic filter: 20 Hz, 12/dB octave
Signal-to-noise ratio: >130 dB
Total harmonic distortion (THD): 0.003%
Fuse Rating: 1A x 1
Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H
Weight: 1.70lbs
Authorized Internet Dealer
5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer)
What is in the THE EPICENTER package:
The Epicenter owner's manual
Pre-amp Bass Restoration Processor black
Remote dash mount control
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SWT-10S4 10" 1000W Shallow Slim Subwoofers + AudioControl Bass Processor
$549.99
$999.99
2) Alpine SWT-10S4 10" 1000W Shallow Slim Subwoofers+AudioControl The Epicenter Bass Processor
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote
Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave.
Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.
General Features:
Active Epicenter Series 2 channel digital bass restoration and line output converter
Designed to integrate with after-market or factory OEM systems
Digital bass restoration restores bass roll-off in factory systems
Speaker level inputs
Bass/Gain level remote: Yes
Signal-Sensing turn-on: Yes
Preamp outputs: 1 pair
Bass Maximizer circuitry
Multiple turn-on options
PFM Subsonic Filter bypass option
Selectable impedance load: 20, 60, 20k ohms
Frequency response: 10 - 100,000 Hz
Subsonic filter: 20 Hz, 12/dB octave
Signal-to-noise ratio: >130 dB
Total harmonic distortion (THD): 0.003%
Fuse Rating: 1A x 1
Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H
Weight: 1.70lbs
Authorized Internet Dealer
5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer)
What is in the THE EPICENTER package:
The Epicenter owner's manual
Pre-amp Bass Restoration Processor black
Remote dash mount control
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SWT-10S4 Car Subwoofer
$439.90
$999.99
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms.
General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SXE-1726S + Front & Rear Speaker Adapters + Harness For Select Honda and Acura Vehicles
$99.90
$199.99
2 Alpine SXE-1726S 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness
Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura:
2007-2012 RDX - Front And Rear Speaker Locations
2009-2013 TL - Front And Rear Speaker Locations
2009-2013 TSX - Front And Rear Speaker Locations
Honda:
2008-2012 Accord - Front And Rear Speaker Locations
2012-2013 Crosstour - Front And Rear Speaker Locations
2010-2011 Accord Crosstour - Front And Rear Speaker Locations
2006-2013 Civic - Front And Rear Speaker Locations
2012-2013 CR-V - Front And Rear Speaker Locations
2011-2013 CR-Z - Front And Rear Speaker Locations
2010-2013 Insight - Front And Rear Speaker Locations
2011-2013 Odyssey - Front And Rear Speaker Locations
Alpine SXE-1726S 6-1/2" 2-Way Coaxial Speakers
General Features:
Rated Power: 40 Watts RMS
Peak Power: 220 Watts
Nominal Impedance: 4 Ohm
Frequency Response: 60Hz - 200Hz
Woofer Magnet: Ferrite
Tweeter Magnet: Neodym
6.5" Diameter
Sensitivity: 92dB/W/m
Neodymium Magnet
Mylar-Titanium Balanced Dome Tweeter
Ferrite Magnet
Long Fiber Natural Pulp Cone
High Polymer Foam Edge
Authorized Dealer
1-year Warranty
Honda Speaker Adapter Kit
Honda/Acura 6 1/2"-6 3/4" Speaker Adapters.
For Select Acura and Honda models.
Installs 6 1/2" or 6 3/4" Speakers.
Dimension: 17"Lx 10"Wx 2"H.
Weight: 0.3 Lbs.
Speaker Connector Harnesses
Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's
factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic
molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance.
The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out.
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SXE-1726S 6.5" Speaker Package With Speaker Adapter and Harness For Select Honda and Acura Vehicles
$89.90
$179.99
2 Alpine SXE-1726S 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness
Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura:
2007-2012 RDX - Front And Rear Speaker Locations
2009-2013 TL - Front And Rear Speaker Locations
2009-2013 TSX - Front And Rear Speaker Locations
Honda:
2008-2012 Accord - Front And Rear Speaker Locations
2012-2013 Crosstour - Front And Rear Speaker Locations
2010-2011 Accord Crosstour - Front And Rear Speaker Locations
2006-2013 Civic - Front And Rear Speaker Locations
2012-2013 CR-V - Front And Rear Speaker Locations
2011-2013 CR-Z - Front And Rear Speaker Locations
2010-2013 Insight - Front And Rear Speaker Locations
2011-2013 Odyssey - Front And Rear Speaker Locations
Alpine SXE-1726S 6-1/2" 2-Way Coaxial Speakers
General Features:
Rated Power: 40 Watts RMS
Peak Power: 220 Watts
Nominal Impedance: 4 Ohm
Frequency Response: 60Hz - 200Hz
Woofer Magnet: Ferrite
Tweeter Magnet: Neodym
6.5" Diameter
Sensitivity: 92dB/W/m
Neodymium Magnet
Mylar-Titanium Balanced Dome Tweeter
Ferrite Magnet
Long Fiber Natural Pulp Cone
High Polymer Foam Edge
Authorized Dealer
1-year Warranty
Honda Speaker Adapter Kit
Honda/Acura 6 1/2"-6 3/4" Speaker Adapters.
For Select Acura and Honda models.
Installs 6 1/2" or 6 3/4" Speakers.
Dimension: 17"Lx 10"Wx 2"H.
Weight: 0.3 Lbs.
Speaker Connector Harnesses
Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's
factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic
molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance.
The precision hand-assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out.
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine Type-R SPR-69 200W 6x9" 2-Way Type-R Series Coaxial Speakers w/ Silk Tweeters
$474.90
$560.00
2 Alpine Type-R SPR-69 200W 6x9" 2-Way Type-R Series Coaxial Speakers w/ Silk Tweeters
Type-R speakers are engineered to deliver prodigious power while maintaining extreme sound clarity, for a totally exciting sound. They provide high power handling, wide frequency response, and a powerful bass kick. The Type-R series includes both component and coaxial models, both of which are highly efficient and provide good installability in a wide range of vehicles.
General Features:
6" x 9" Type-R Coaxial 2-way Car Speakers
Power Handling:
Peak: 600 watts per pair / 300 watts each
RMS: 200 watts per pair / 100 watts each
Recommended power range: 5 - 125 watts RMS per channel
Impedance: 4 ohms
New style grille offers full woofer protection along with a unique new design
Multi-Layer hybrid fiber cone delivers a really strong bass response
High Amplitude Multi Roll (HAMR) Santoprene rubber surround provides consistent, extended cone movement
1" Swiveling silk ring-dome tweeter produces smooth highs
High-Density polymer frames
Frequency Response: 60-29,000 Hz
Sensitivity: 90 dB
Top Mount depth: 2-7/8"
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the box:
Alpine SPR-69 owner's manual
Two 2-way 6x9 Speakers
2 Bottom mount rings
2 Grilles
2 Grille badges
Eight 1-1/8" Self-tapping screws
Eight M4x60mm Machine screws
8 Split lock washers
8 Flat washers
Eight M4 Hex nuts
8 Speed clips
Warranty information
Important Notice sheet
Template and specs on box
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine Type-S SPS-510
5-1/4" 2-Way Type-S Series Coaxial Car Speakers $189.90 $319.99
5-1/4" 2-Way Type-S Series Coaxial Car Speakers $189.90 $319.99
2 Pair Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers
IT FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a 5 1/4-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set is a simple solution to getting Alpine sound in many of these vehicles today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5 1/4" S-Type Series TYPE Car Speakers/Component System
Peak Power Handling: 340 watts per pair / 170 watts each
RMS Power Handling: 110 watts per pair / 55 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
3/4" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-S50 package:
S-S50 owner's manual
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine Type-S SPS-510
5-1/4" 2-Way Type-S Series Coaxial Car Speakers $189.90 $319.99
5-1/4" 2-Way Type-S Series Coaxial Car Speakers $189.90 $319.99
Alpine Type-S SPS-510 5-1/4" 2-Way Type-S Series Coaxial Car Speakers
General Features:
5-1/4" Type S Series Car Speakers
Power Handling:
Peak: 340 watts per pair / 170 watts each
RMS: 110 watts per pair / 55 watts each
Poly-mica cone woofer
Rubber surround
3/4" Silk dome tweeter
Optimized air-flow design
Stamped steel basket frame
Affordable premium quality upgrade to your factory audio system
Great power-efficient speakers
4 ohms impedance
Square-wire short voice coil
Low distortion strontium magnet
Top-mount depth: 2"
Cutout diameter: 4-1/2"
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the box:
Alpine SPS-510 owner's manual
Two 2-Way 5-1/4" speakers
Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other)
Eight 3/4" Self-tapping screws
8 Flat washers
8 Speed clips
Warranty information
Important Notice sheet
Template and specs on the box
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine W10S4 10" 1500 Watt Peak 4-Ohm Car Audio Subwoofers
$199.95
$250.00
2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
10" Single 4-ohm BassLine (Bass) Series Subwoofer
Power Handling:
Peak: 750 watts
RMS: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelet Ribs (P.W.R.) cone design
An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Top-mount depth: 5-1/16"
Cutout diameter: 9"
Frequency Response: 24 - 200Hz
Sensitivity: 86.6dB
Resonance Frequency (Fs): 32
Authorized Dealer
1-year Manufacturer's Warranty
What's in the W10S4 package:
W10S4 owner's manual
One 10" Subwoofer per box
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty Information
Important Notice!
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine W10S4 10-" Single 4 Ohm Sub Bundle
$199.95
$250.00
2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
10" Single 4-ohm BassLine (Bass) Series Subwoofer
Power Handling:
Peak: 750 watts
RMS: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelet Ribs (P.W.R.) cone design
An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Top-mount depth: 5-1/16"
Cutout diameter: 9"
Frequency Response: 24 - 200Hz
Sensitivity: 86.6dB
Resonance Frequency (Fs): 32
Authorized Dealer
1-year Manufacturer's Warranty
What's in the W10S4 package:
W10S4 owner's manual
One 10" Subwoofer per box
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty Information
Important Notice!
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.