alpine (1200)

Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods One Pair You’ve enjoyed the Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now, you can get Alpine sound on various power sports and all-terrain vehicles for an uninterrupted music experience beyond the vehicle. The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90 degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on various side-by-side, UTV, and other All-Terrain vehicles. General Features: Enclosed are 6.5” Coaxial 2-Way Speakers 1” Teteron Dome Tweeter Drivers Rated IP55 Weather-Resistant Enclosures rated IP65 Weather-Resistant Steel Frame ASA 978 B+ Fiberglass Built-in pro-style Folding Style Clamp that will fit 1.5"-2" Rails. Rotating Coated Aluminum Base 90-degree Plug with 20AWG Pigtail 90W RMS 225W Peak Power Handling Nominal Impedance 4? 50-22kHz Frequency Response Santoprene Woofer Material 25mm voice coil Diameter: 6.5 Inches Impedance: 4 Ohm Frequency Response: 50-22000 Hz Peak Power Handling: 225 Watts Color: Black UPC: 793276084606 Weight: 7 Authorized Internet Dealer What is in the SPV-65-SXS package: SPV-65-SXS owner's manual 2 Speaker pods with integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on other ends) 2 Vinyl logo badges 2 Metal logo badges Instruction manual Warranty information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S2 10" 1000W Peak/350W RMS Shallow Slim Truck Car Subwoofer Bundle with AudioControl The Epicenter Black Digital Car Bass Processor with Remote Audio Control Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box to get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you plan on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What's in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S2 10" 1000W Peak/350W RMS Shallow Slim Truck Car Subwoofer Bundle with AudioControl The Epicenter Black Digital Car Bass Processor with Remote Audio Control Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy, or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you plan on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2) Alpine SWT-10S4 10" 1000W Shallow Slim Subwoofers+AudioControl The Epicenter Bass Processor 2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy, or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you plan on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms.  General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SXE-1726S 6.5" speaker Compatible Fit for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange Speaker Harnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine SXE-1726S 6-1/2" 2-Way Coaxial Speakers General Features: Rated Power: 40 Watts RMS Peak Power: 220 Watts Nominal Impedance: 4 Ohm Frequency Response: 60Hz - 200Hz Woofer Magnet: Ferrite Tweeter Magnet: Neodym 6.5" Diameter Sensitivity: 92dB/W/m Neodymium Magnet Mylar-Titanium Balanced Dome Tweeter Ferrite Magnet Long Fiber Natural Pulp Cone High Polymer Foam Edge Authorized Dealer 1-year Warranty Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SXE-1726S 6.5" speaker Compatible Fit for Selected Honda Acura 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange Speaker Harnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine SXE-1726S 6-1/2" 2-Way Coaxial Speakers General Features: Rated Power: 40 Watts RMS Peak Power: 220 Watts Nominal Impedance: 4 Ohm Frequency Response: 60Hz - 200Hz Woofer Magnet: Ferrite Tweeter Magnet: Neodym 6.5" Diameter Sensitivity: 92dB/W/m Neodymium Magnet Mylar-Titanium Balanced Dome Tweeter Ferrite Magnet Long Fiber Natural Pulp Cone High Polymer Foam Edge Authorized Dealer 1-year Warranty Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand-assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the  W10S4 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Important Notice! ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.