00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S-W12D2 Car Subwoofer
1800W Max, 600W RMS 12" Type-S Series Dual 2 ohm Car Subwoofer $417.90 $340.00
1800W Max, 600W RMS 12" Type-S Series Dual 2 ohm Car Subwoofer $417.90 $340.00
2 Alpine S-W12D2 1800W Max (600W RMS) 12" Type-S Series Dual 2 ohm Car Subwoofer
VERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications.
General Features:
12" 2 Ohm Type-S Series Subwoofer
Power Handling:
Peak: 1800 watts
RMS: 600 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 5-1/16"
Cutout diameter: 10-9"
Frequency Response: 26- 200Hz
Sensitivity: 86.2dB
Resonance Frequency (Fs): 31 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
Two 12" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring (installed)
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide (English/ French)
Online product registration information (English/ French/ Spanish)
Warranty information (English/ French)
Important Notice! (English/ French)
Alpine S-W12D2 owners manual
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S-W12D4 Car Subwoofer
1800W Max (600W RMS) 12" Type-S Series Dual 4 Ohm Car Subwoofer $417.90 $599.99
1800W Max (600W RMS) 12" Type-S Series Dual 4 Ohm Car Subwoofer $417.90 $599.99
2 Alpine S-W12D4 1800W Max (600W RMS) 12" Type-S Series Dual 4 Ohm Car Subwoofer
VERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications.
General Features:
12" 4 Ohm Type-S Series Subwoofer
Power Handling:
Peak: 1800 watts
RMS: 600 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 5-1/16"
Cutout diameter: 10-9"
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 31 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-W12D4 package:
Alpine S-W12D4 owners manual
One 12" Dual 4-ohm voice coil subwoofer
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty Information
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S-W8D2 Car Subwoofers
900W Max (300W RMS) 8" S-Series Dual 2 Ohm Car Subwoofers $322.90 $379.99
900W Max (300W RMS) 8" S-Series Dual 2 Ohm Car Subwoofers $322.90 $379.99
2 Alpine S-W8D2 900W Max (300W RMS) 8" S-Series Dual 2 Ohm Car Subwoofers
ADD BASS TO PRACTICALLY ANY VEHICLE
Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D2 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under seats, behind rear bench seats in trucks, or even in some door applications.
General Features:
8" 2 Ohm S-Series Subwoofer
Power Handling:
Peak: 900 watts
RMS: 300 watts
Recommended power range: 150 - 300 RMS
Kevlar Reinforced Pulp Cone
HAMR Santoprene Rubber Surround
High Strength Steel Frame Basket
Concealed Mount Gasket
High Strength Steel Frame Basket
10 AWG Push Terminals
High Excursion Underhung Voice Coil Configuration
High-Grade Strontium Ferrite Magnet
Top-mount depth: 3-3/4"
Cutout diameter: 6-7/8"
Frequency Response: 34 - 200 Hz
Sensitivity: 83dB
Resonance Frequency (Fs): 48 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
Two 8" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring (installed)
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide (English/ French)
Online product registration information (English/ French/ Spanish)
Warranty information (English/ French)
Important Notice! (English/ French)
Alpine S-W8D2 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S-W8D4 Car Subwoofers 900W Max (300W RMS) 8" S-Series Dual 4 Ohm Car Subwoofers
$322.90
$379.99
2 Alpine S-W8D4 900W Max (300W RMS) 8" Type S Series Dual 4 Ohm Car Subwoofer
ADD BASS TO PRACTICALLY ANY VEHICLE
Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under-seats, behind rear bench seats in trucks, or even in some door applications.
General Features:
8" 4 Ohm Type S Series Subwoofer
Power Handling:
Peak: 900 watts
RMS: 300 watts
Recommended Power Range: 150 - 300 Watts
Kevlar Reinforced Pulp Cone
HAMR Santoprene Rubber Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Compound Radius Curve Extended Pole Geometry
Perimeter Vented Frame with Airflow Management System
10 AWG Push Terminals
35mm Underhung Voice Coils
Concealed Mount Gasket
34oz Ferrite Magnet
Top-mount depth: 3-3/4"
Cutout diameter: 6-7/8"
Frequency Response: 34-200Hz
Authorized Dealer
1-year Manufacturer's Warranty
Priced Individually
What's in the S-W8D4 package:
Two 8" Dual 4-ohm voice coil subwoofer
Alpine S-W8D4 owner's manual
1 Rubber concealing ring
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
Important Notice!
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers
$246.90
$400.00
2 Pair Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience.
General Features:
6-1/2" 2-way Coaxial Car Speakers
Peak Power Handling: 480 watts per pair / 240 watts each
Power Handling RMS: 160 watts per pair / 80 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
Optional Grills KTE-S65G available
1" Silk Dome Tweeters
Ferrite magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 55 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S65
1-year Manufacturer's Warranty
What's in the S2-S65 package:
Alpine S2-S65 owner's manual
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire
Eight 1-1/8" Screws
Eight M4x6.5mm
Eight M4 Nuts
6 Flat washers
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Declaration of conformity
Template and specs on box
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers & KIT10 Installation AMP Kit
$256.90
$400.00
2 Pair Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience.
General Features:
6-1/2" 2-way Coaxial Car Speakers
Peak Power Handling: 480 watts per pair / 240 watts each
Power Handling RMS: 160 watts per pair / 80 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
Optional Grills KTE-S65G available
1" Silk Dome Tweeters
Ferrite magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 55 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S65
1-year Manufacturer's Warranty
What's in the S2-S65 package:
Alpine S2-S65 owner's manual
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire
Eight 1-1/8" Screws
Eight M4x6.5mm
Eight M4 Nuts
6 Flat washers
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Declaration of conformity
Template and specs on box
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers
$265.90
$400.00
2 Pair Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers
Experience the rich detail and sonic excellence of Alpine’s next-generation S-Series loudspeakers — now featuring Hi-Res Audio for the first time.
The S-Series continues to establish the benchmark in sound quality and value by producing impressively detailed loudspeakers that accurately represent true studio-level Hi-Resolution audio faithful across the entire frequency bandwidth.
Alpine innovation continues with all-new technology and engineering in the construction and materials adopted in the new S-Series. The exclusive design composite glass fiber hybrid cone is extremely rigid and lightweight, which further unites with Alpine’s patented HAMR surround to achieve increased control and excursion of the woofer diaphragm, resulting in pure, punchy sound and powerful bass at high SPL.
General Features:
6" x 9" 2-way Coaxial Car Speakers
Peak Power Handling: 520 watts per pair / 260 watts each
RMS Power Handling: 170 watts per pair / 85 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
1" Silk Dome Tweeters
Large Ferrite magnet structure
Top-mount Depth: 3"
Cutout Dimensions: 5-29/32 x 8-3/4
Impedance: 4 ohms
Frequency Response: 65 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S69
1-year Manufacturer's Warranty
What is in the S2-S69 packages:
S2-S69 owner's manual
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire
Eight 1-1/8" Screws
Eight M4x60mm Machine screws
Warranty information
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers & KIT10 Installation AMP Kit
$275.90
$400.00
2 Pair Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the rich detail and sonic excellence of Alpine’s next-generation S-Series loudspeakers — now featuring Hi-Res Audio for the first time.
The S-Series continues to establish the benchmark in sound quality and value by producing impressively detailed loudspeakers that accurately represent true studio-level Hi-Resolution audio faithful across the entire frequency bandwidth.
Alpine innovation continues with all-new technology and engineering in the construction and materials adopted in the new S-Series. The exclusive design composite glass fiber hybrid cone is extremely rigid and lightweight, which further unites with Alpine’s patented HAMR surround to achieve increased control and excursion of the woofer diaphragm, resulting in pure, punchy sound and powerful bass at high SPL.
General Features:
6" x 9" 2-way Coaxial Car Speakers
Peak Power Handling: 520 watts per pair / 260 watts each
RMS Power Handling: 170 watts per pair / 85 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
1" Silk Dome Tweeters
Large Ferrite magnet structure
Top-mount Depth: 3"
Cutout Dimensions: 5-29/32 x 8-3/4
Impedance: 4 ohms
Frequency Response: 65 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S69
1-year Manufacturer's Warranty
What is in the S2-S69 packages:
S2-S69 owner's manual
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire
Eight 1-1/8" Screws
Eight M4x60mm Machine screws
Warranty information
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SBT-S10V 10" Loaded Truck Enclosures 1000W Ported Subwoofer Enclosure
$599.90
$850.00
2 Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure
With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions.
More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system.
FEA Optimized Dual-Sided Machined CRC Motor Structure
Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly.
FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design
Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package
Subwoofer Features:
10" SWT Series Single 2-ohm Shallow Mount Subwoofer
Peak Power Handling: 1000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
Frequency Response: 28 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
Enclosure Features:
Ported angled / wedge-style truck enclosure
3/8" medium-density fiberboard (MDF) construction
Automotive-grade dark grey carpet
8AWG Push Terminals
Protective mesh subwoofer grilled included
Dimensions: 7"D x 22"W x 16"H
What's in the SBT-S10V package:
Ported enclosure loaded with one 10" woofer
2 Mounting plates
Six 1/2" Self-tapping screws
Owner's manual (English/ French/ Spanish)
Installation notes
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SPE-6000 + Front & Rear Speaker Adapters + Harness For Select Honda and Acura Vehicles
$199.99
$399.99
2 Set Alpine SPE-6000 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness
Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura:
2007-2012 RDX - Front And Rear Speaker Locations
2009-2013 TL - Front And Rear Speaker Locations
2009-2013 TSX - Front And Rear Speaker Locations
Honda:
2008-2012 Accord - Front And Rear Speaker Locations
2012-2013 Crosstour - Front And Rear Speaker Locations
2010-2011 Accord Crosstour - Front And Rear Speaker Locations
2006-2013 Civic - Front And Rear Speaker Locations
2012-2013 CR-V - Front And Rear Speaker Locations
2011-2013 CR-Z - Front And Rear Speaker Locations
2010-2013 Insight - Front And Rear Speaker Locations
2011-2013 Odyssey - Front And Rear Speaker Locations
Alpine Type SPE6000 Series 6.5" Coaxial 2-Way Speaker
Alpine SPE-6000 120W 6.5" 2-Way Type-E Coaxial Car Speakers w/ Silk Tweeters
Hearing is BelievingStep up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers, for a performance-packed sound quality you expect from Alpine.Quality over QuantityJust because you want better sound in your car, doesn’t mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you simply need replacement speakers or even want to start building a sound system.Soft Dome Tweeter TechnologyTo output quality sound, the Type-E speakers are developed off of soft dome tweeters, rather than traditional cone-type tweeters which can be harsh. This results in a more enjoyable listening experience in the car when playing back your music or other entertainment over your sound system.Let Me See Your GrillOutfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function. The dark, solid protective grill is an attractive upgrade to standard factory speakers.General Features:
6-1/2" Type-E Coaxial 2-way Car Speakers
Power Handling:
Peak: 480 watts per pair / 240 watts each
RMS: 120 watts per pair / 60 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 68-20,000 Hz
Sensitivity: 88.5 dB
Top-Mount Depth: 2-3/8"
Mounting Diameter: 5-1/2"
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SPE-6000 box:
Two 2-way speakers
2 Grilles
Eight 1-3/8" Screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
SPE-6000 owner's manual
Honda Speaker Adapter Kit
Honda/Acura 6 1/2"-6 3/4" Speaker Adapters.
For Select Acura and Honda models.
Installs 6 1/2" or 6 3/4" Speakers.
Dimension: 17"Lx 10"Wx 2"H.
Weight: 0.3 Lbs.
Speaker Connector Harnesses
Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's
factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic
molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance.
The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out.
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SPE-6000 6.5" Speaker Package With Speaker Adapter and Harness For Select Honda and Acura Vehicles
$199.99
$399.99
2 Set Alpine SPE-6000 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness
Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura:
2007-2012 RDX - Front And Rear Speaker Locations
2009-2013 TL - Front And Rear Speaker Locations
2009-2013 TSX - Front And Rear Speaker Locations
Honda:
2008-2012 Accord - Front And Rear Speaker Locations
2012-2013 Crosstour - Front And Rear Speaker Locations
2010-2011 Accord Crosstour - Front And Rear Speaker Locations
2006-2013 Civic - Front And Rear Speaker Locations
2012-2013 CR-V - Front And Rear Speaker Locations
2011-2013 CR-Z - Front And Rear Speaker Locations
2010-2013 Insight - Front And Rear Speaker Locations
2011-2013 Odyssey - Front And Rear Speaker Locations
Alpine Type SPE6000 Series 6.5" Coaxial 2-Way Speaker
Alpine SPE-6000 120W 6.5" 2-Way Type-E Coaxial Car Speakers w/ Silk Tweeters
Hearing is BelievingStep up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers, for a performance-packed sound quality you expect from Alpine.Quality over QuantityJust because you want better sound in your car, doesn’t mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you simply need replacement speakers or even want to start building a sound system.Soft Dome Tweeter TechnologyTo output quality sound, the Type-E speakers are developed off of soft dome tweeters, rather than traditional cone-type tweeters which can be harsh. This results in a more enjoyable listening experience in the car when playing back your music or other entertainment over your sound system.Let Me See Your GrillOutfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function. The dark, solid protective grill is an attractive upgrade to standard factory speakers.General Features:
6-1/2" Type-E Coaxial 2-way Car Speakers
Power Handling:
Peak: 480 watts per pair / 240 watts each
RMS: 120 watts per pair / 60 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 68-20,000 Hz
Sensitivity: 88.5 dB
Top-Mount Depth: 2-3/8"
Mounting Diameter: 5-1/2"
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SPE-6000 box:
Two 2-way speakers
2 Grilles
Eight 1-3/8" Screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
SPE-6000 owner's manual
Honda Speaker Adapter Kit
Honda/Acura 6 1/2"-6 3/4" Speaker Adapters.
For Select Acura and Honda models.
Installs 6 1/2" or 6 3/4" Speakers.
Dimension: 17"Lx 10"Wx 2"H.
Weight: 0.3 Lbs.
Speaker Connector Harnesses
Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's
factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic
molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance.
The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out.
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine SPS-410 4" Coaxial 2-Way, 280-Watt Type-S Series Coaxial Car Audio Speakers Bundle
$151.90
$239.99
2 Alpine SPS-410 4" Coaxial 2-Way, 280-Watt Type-S Series Coaxial Car Audio Speakers Bundle
This bundle contains two Alpine SPS-410 4" Coaxial 2-Way Speaker Set Alpine sound tailor-made for easy factory speaker placement. Introducing the Type-S speaker line up with multiple size options that fit almost any vehicle. If you want to add incredible sounding Alpine speakers to your system, this is the way to go. This latest offering from the popular Type-S family of speakers is a best bet upgrade, and still budget-friendly. Overview Great-sounding speaker upgrades at a competitive price. Perfect for OEM upgrade, with many sizes to choose from to suit almost any vehicle. New cosmetics that look good in your car, and fit easily in stock speaker locations. Improve the output and sound quality of your vehicle with these highly efficient speaker choices. High-efficiency design runs easily off of factory or built-in head unit power.
General Features:
4" Type-S Series Car Speakers
Power Handling:
Peak: 280 watts per set / 140 watts each side
RMS: 90 watts per set / 45 watts each side
Tuned poly-mica cone woofer
Butyl rubber surround for natural response and stability
3/4" Wide-Range Silk dome tweeter
Optimized air-flow design
Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity
HD Polymer frame
Affordable premium quality upgrade to your factory audio system
FEA optimized motor structure
4" x 6" Mounting adapters included
Great power-efficient speakers
Swivel-mount tweeter
4 ohms impedance
Square-wire short voice coil
New cone design allows for faster energy transfer & clarity
Aramid reinforced TIL bobbin holds voice coil wire very rigid
High-grade network components
Neodymium tweeter magnet structure
Low distortion strontium woofer magnet
Top-mount depth: 1-21/32"
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov