USB Microphone (1205)

Yorkville Sound C15W, Coliseum Series 500W 2-Way Installation Speaker 15 Inch - White Coliseum 15" Installation Loudspeakers Coliseum loudspeakers are designed for installation in home, retail, restaurant, office, school, and house of worship spaces. Whether you need discrete in-ceiling speakers, a horn for outdoor paging, or a flown array of powered cabinets, Coliseum combines high-fidelity audio with clean, minimalist aesthetics that blend naturally into any environment. The C15W is the most powerful loudspeaker in the Coliseum series. With 500 watts of power handling, a 15” woofer, rotatable horn, and OmniMount-compatible rigging points, the C15W is ideal for large commercial or worship applications. The optional FH2W hardware kit offers even more mounting flexibility for the C15W and C12W. It allows single-point hangs for solo cabinets or two-box arrays, with a staggered hole pattern for multiple tilt angles. If additional tilt-down is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When mounting two loudspeakers, the FH2W splays them at optimum angles to minimize interference   Product Specification:   System Type: Two Way Active or Passive: Passive Power Rating (Watts): 500 Biampable: No Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 99 Max SPL (dB): 126 Frequency Response (Hz +/- 3dB): 50 - 20k Crossover Frequency (Hz): 1100 Driver Configuration: 15 inch / 1 inch HF Driver(s): 1 inch HF Horn: Rotatable ABS Waveguide HF Dispersion (°H x °V): 0 x 50 Rotatable HF Protection: CTL Inputs - Speakon 4-pin: 2 Inputs - Screw Terminal: 1 Pair Flying Hardware: 1/4 inch Optional Flying Hardware: FH2W Flyware is available Pole Mount Adapter (1 3/8"-3.5cm): No Enclosure Materials: 15mm (5/8inch) 11-ply Russian birch Grille: Perforated Metal Covering / Finish: Two Part White Epoxy Other Details: Has rear mounted rigging points for Omnimount 120.0WA bracket Dimensions (DWH xbackW, inches): 15.4 x 20.9 x 28.7 x 15.7 Dimensions (DWH xbackW, cm): 39.1 x 53.1 x 72.9 x 39.8 Weight (lbs/kg): 75 / 34.2 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound C12W, Coliseum 400 Watt 12-Inch Install Speaker 80x50 Rotatable Horn - White Coliseum 12" Installation Loudspeaker Coliseum loudspeakers are designed for installation in home, retail, restaurant, office, school, and house of worship spaces. Whether you need discrete in-ceiling speakers, a horn for outdoor paging, or a flown array of powered cabinets, Coliseum combines high-fidelity audio with clean, minimalist aesthetics that blend naturally into any environment. With 400 watts of power handling, a 12” woofer, rotatable horn, and OmniMount-compatible rigging points, the C12W is ideal for larger commercial or worship applications. The optional FH2W hardware kit offers even more mounting flexibility for the C12W and C15W. It allows single-point hangs for solo cabinets or two-box arrays, with a staggered hole pattern for multiple tilt angles. If additional tilt-down is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When mounting two loudspeakers, the FH2W splays them at optimum angles to minimize interference. Product Specification:   System Type: Two Way Active or Passive: Passive Power Rating (Watts): 400 Biampable: No Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 98 Max SPL (dB): 124 Frequency Response (Hz +/- 3dB): 55 - 20k Crossover Frequency (Hz): 1100 Driver Configuration: 12 inch / 1 inch HF Driver(s): 1 inch HF Horn: Rotatable ABS Waveguide HF Dispersion (°H x °V): 80 x 50 Rotatable HF Protection: CTL Inputs - Speakon 4-pin: 2 Inputs - Screw Terminal: 1 Pair Flying Hardware: 1/4 inch Optional Flying Hardware: FH2W Flyware bracket is available Pole Mount Adapter (1 3/8"-3.5cm): No Enclosure Materials: 15mm (5/8inch) 11-ply Russian birch Grille: Perforated Metal Covering / Finish: Two Part White Epoxy Other Details: Has rear-mount rigging points for Omnimount 60.0WA Bracket Dimensions (DWH xbackW, inches): 14.3 x 16.2 x 24.1 x 11.1 Dimensions (DWH xbackW, cm): 36.3 x 41.1 x 61.2 x 28.2 Weight (lbs/kg): 54 / 24.6 Specifications System Type: 2-WayActive or Passive: PassivePower Rating: 400 W Nominal Impedance (Ohms): 8ΩSensitivity (dB AT 1Watt/1m): 98 dBMax SPL : 124 dBFrequency Response (Hz +/- 3dB): 55 Hz - 20 kHzDispersion (H x V): 80° x 50° RotatableCrossover Frequency: 1.1 kHzDriver Configuration :1x 12" LF Driver, 1x 1" HF Driver with Rotatable ABS WaveguideHF Protection : CTLInputs: 2x speakON® 4-Pin, Screw TerminalsFlying Hardware: 1/4"Optional Flying Hardware: FH2W Flyware BracketPole Mount Adapter (1 3/8  No Enclosure Materials 15 mm (5/8") 11-ply Baltic BirchGrille: Perforated MetalCovering / Finish: Two-Part White EpoxyOther Details : Rear-Mount Rigging Points for Omnimount BracketDimensions (DWH): 14.3" x 16.2" x 24.1" (36.3 cm x 41.1 cm x 61.2 cm)Weight: 54 lbs / 24.6 cm  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NXF35U, U-Bracket Flying Hardware Kit The Yorkville NXF35U kit allows enclosures to be mounted in more ways than standard shackles and cables allow. Using the NXF35U bracket, the multiple fly-point options will enable the rig to be flown at different angles. The bracket also helps secure the NX enclosure to the truss or roofing systems. The NXF35U is easily mounted strategically to the top and bottom of the enclosure. The NX enclosure can also be rotated up to 30 degrees across the horizontal plane (within the bracket housing). Image is for illustrative purposes only. Speakers are not included. General Features: Weight: 3 lbs (1.36 kg) Dimensions: 12 x 6 x 2 inches (30 x 15 x 5 cm) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX25P-2, 300W NX Series 2-Way Powered Loudspeaker - 12 Inch NX 12” Powered Loudspeaker NX loudspeakers have a history of traditional analog design and a reputation for road-tested reliability. Yorkville is proud to introduce the new NX12P, a thoroughly modern update to this classic series. This next-generation model offers advanced DSP, powerful limiting, extended connectivity, and exceptional sound. The NX12P works equally well as a front-of-house speaker, stage monitor, or side-fill cabinet. It features a 12” woofer and 4850 watts of peak power (1450 watts program).  In addition to the primary XLR input and output, the NX12P has an onboard three-channel mixer, so it doesn’t require an external console for small PA applications. Two mono channels each feature Combi-Jack inputs, phantom power,  switchable mic or line input levels, and switchable high-pass filters. The third channel accepts stereo 1/8" line or Bluetooth sources, including wireless stereo playback between two cabinets. The master section features a high-pass filter for use with a subwoofer or as a vocal monitor, and three selectable modes optimize EQ and dynamics for music playback, live performance, or stage monitor use. NX speakers have been trusted on stages worldwide for over 20 years, and the new NX12P is ready to inspire a new generation of performers. General Features: 4850 W Peak Power (1450 W Program) 12” LF Driver and 1” HF Driver Main Input & Output XLR Connections Onboard 3-Channel Mixer (2x Mono, 1x Stereo) with Phantom Power    Bluetooth® Wireless Streaming Switchable LF Rolloff for Use with Subwoofers Onboard DSP with 3 Voicing Modes Integrated Flying Hardware System Type: Powered Loudspeaker Power Rating: 4850W Peak (1450 W Program) Max SPL: 128 dB Peak Frequency Response (Hz +/- 3dB): 50 Hz – 20 kHz HF Driver(s):1” Exit Compression Driver LF Driver(s):12” In / Out Connections: Main In (XLR-F), Main Out (XLR-M) Channel 1 Input: 1 Combi-Jack (XLR / 1/4") Channel 1 Controls: Level, Input Type, High-Pass Filter Channel 2 Input: 1 Combi-Jack (XLR / 1/4") Channel 2 Controls: Level, Input Type, High-Pass Filter Channel 3 Input: 1/8" TRS, Bluetooth® Wireless Channel 3 Controls: Level Bar Handles: 2 (1 Side, 1 Top) Flypoints: 3 (2 Top, 1 Pullback) Flying Hardware:M8 Threading Pole Mount Adapter (1 3/8 1 (Bottom) Enclosure Materials: Polypropylene Grille: Perforated Metal Dimensions (DWH) :12.68” x 15.20” x 25.29” (32.2 cm x 38.6w cm x 64.2 cm) Weight: 45.3 lbs / 20.6 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX10C-2, Two-Way Coaxial 1200W Powered PA Speaker - 10/1 Inch NX 10” Powered Loudspeaker NX loudspeakers have earned a reputation for proven reliability for over twenty years. The traditional analog design works equally well as a front-of-house speaker, stage monitor, or side-fill cabinet. Featuring a 10” woofer and 1200 watts of peak power (500 watts program), the NX10C-2 is the most compact, portable speaker in the NX series. The input section features an XLR mic input and XLR, 1/4", and 1/8" line inputs. Link output allows multiple NX10C-2 cabinets to be chained together using a single input source. The variable EQ control is flat at the center position, boosts treble when turned clockwise, and boosts both treble and bass when turned counter-clockwise. The NX10C-2 has been designed for easy system integration. It can be mounted under light bars, saving stage space and eliminating the need for separate lighting and speaker stands. On tight stages, it can also be mounted below the front-of-house cabinets on a single speaker stand. The rear handle also functions as a tilt stand, allowing it to be used as a compact, wide-coverage floor monitor or center-fill cabinet. General Features: 1200 W Peak Power (500 W Program 10” LF Driver with 1” Voice Coi 1” Coaxial HF Drive 1x Combi-Jack Mic/Line, 1x Combi-Jack Line, and 1x 1/8" TRS Inputs 1x XLR Link Output Variable EQ Contour - Flat, Bright (Treble Boost), or Playback (Treble & Bass Boost Through-Hole Pole Mount for Mounting Multiple Cabinets on a Single Stand Rear Handle Functions as Tilt Stand Made in Canada Powered Loudspeaker 1200 W Peak (500 W Program) Max SPL 127 dB Peak (124 dB Continuous) Frequency Response (Hz +/- 3dB) 80 Hz - 20 kHz Crossover Frequency     2.5 kHz HF Driver(s) 1” Throat, 1.4” PETP Film HF Protection  Peak Limiter LF Driver(s) 10” with 2.5" Voice Coil LF Protection Thermal / Overcurrent HF Amplifier Type Class A/B LF Amplifier Type 3-Tier Class H Power Consumption 120 / 310 VA Inputs 1x Combi-Jack (Mic / Line) 1x Combi-Jack (Line) 1x 1/8" TRS (Line) Input Sensitivity (Vrms Sine) 1.23 Vrms Sine, +4 dBu Controls Mic Level Line Level EQ Contour Limiter Yes LED Indicators Power, Clip Bar Handles 1 (Back) Pole Mount Adapter (1 3/8 Pole Through) Enclosure Materials Injection-Molded Fiber-Reinforced ABS / Aluminum / 13-Ply Birch Dimensions: (DWH)13” x 13.5” x 12” (33 cm x 34.3 cm x 30.5 cm) Weight: 25 lbs / 11.3 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega CVX-15 Pro Audio DJ Bluetooth 15" 1500W Powered 2-Way Loud Speaker The Cerwin Vega CVX-15 powered loudspeaker features 1500 watts of Class D power, a 3-channel mixer with two combo XLR/TRS inputs, 1 TS stereo input, and 3 XLR Outputs. Main/Monitor and Live/Playback EQ Modes with a front clip indicator are housed in a lightweight, durable finish for touring, ballrooms, medium to larger clubs, outdoor venues, houses of worship, rentals, and staging applications, the CVX 15-fueled by Cerwin Vega's 65 years of professional live sound solutions-delivers power to spare, with accurate, sonic precision. General Features: Full-range powered loudspeaker 1500 watt Class D amplifier 3 Channel Mixer 1.4" High Frequency Driver 15" Low Frequency Driver Power Rating: 1500 watts Frequency Response: 54Hz - 22kHz (±3 dB) Frequency Range: 42Hz - 24kHz (-10 dB) Max SPL: 134 Inputs: 2 Combo XLR/TRS, 1 TS Pair Outputs: 3 XLR Switches: Main/Monitor Mode Live/Playback EQ High Pass Filter Front Clip Indicator Enclosure: Polymer Finish: Standard Weight: 55.44 lbs. (25.2 Kg) Dimensions: 698mm x 434mm x 345mm Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega CVX-15 Pair Package with 2 MR DJ SS300 Speaker Stands & XLR6F to XLR6M 6' XLR Cables This Package Includes: (2) Cerwin Vega CVX-15 powered loudspeakers 2 MR DJ SS300 Speaker Stands & XLR6F to XLR6M 6' XLR Cables Cerwin Vega CVX-15 Pro Audio Bluetooth 15" 1500W Powered 2-Way Loud Speaker The Cerwin Vega CVX-15 powered loudspeaker features 1500 watts of Class D power, a 3-channel mixer with two combo XLR/TRS inputs, 1 TS stereo input, and 3 XLR Outputs. Main/Monitor and Live/Playback EQ Modes with a front clip indicator are housed in a lightweight, durable finish for touring, ballrooms, medium to larger clubs, outdoor venues, houses of worship, rentals, and staging applications, the CVX 15-fueled by Cerwin Vega's 65 years of professional live sound solutions-delivers power to spare, with accurate, sonic precision. General Features: Full-range powered loudspeaker 1500 watt Class D amplifier 3 Channel Mixer 1.4" High Frequency Driver 15" Low Frequency Driver Power Rating: 1500 watts Frequency Response: 54Hz - 22kHz (±3 dB) Frequency Range: 42Hz - 24kHz (-10 dB) Max SPL: 134 Inputs: 2 Combo XLR/TRS, 1 TS Pair Outputs: 3 XLR Switches: Main/Monitor Mode Live/Playback EQ High Pass Filter Front Clip Indicator Enclosure: Polymer Finish: Standard Weight: 55.44 lbs. (25.2 Kg) Dimensions: 698mm x 434mm x 345mm Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.