00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ RX22 Fits Diaphragm Peavey 22XT, RX22, 22A, 22T, 2200 10-924
$19.99
$39.99
MR DJ USA RX22 Compatible Fit Replacement Peavey Diaphragm 22XT & RX22 8Ohm aftermarket diaphragm.
This is a 1 Pc brand new MR DJ RX22 Replacement Diaphragm for PEAVEY 22XT & RX22 8ohm aftermarket diaphragm.
It fits several PEAVEY models. This titanium diaphragm handles the same amount of power and sounds just like the original! These aftermarket diaphragms are made to the Peavey 22XT specification. They have the same style of titanium domes, voice coils, and formers. This diaphragm can be used in 22 series such as 22XTRD, 22A, 22T, and 22XT, 22XT+, 2200, etc., ·
General Features:
Contents: Replacement Diaphragm for Peavey Horn Driver ·
Nominal Impedance: 8 Ohms ·
Compatible with the following Peavey 22 Series Drivers: 22XT, 22XT+, 22XTRD, 22T, 22A, 2200, and more
Diaphragm without Driver
Overall Diaphragm Diameter: 4.5"
Voice Coil Diameter: 2" with titanium dome.
Quick disconnect spade connectors ·
Handle the Same Amount of Power & Sounds Just Like the Original Peavey Diaphragm ·
Easy to Install with Simple Hand Tools and Require No Soldering ·
Significant Part for Replacing Factory Diaphragms ·
Overall Diaphragm Diameter: 4.5" ·
Voice Coil Diameter: 2" with titanium dome ·
Impedance: 8 ohms. Price per kit
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
2 Mackie SRM450 SRM-450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part
$59.98
2 Replacement Fit for Mackie SRM450 SRM-450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part
44.5mm ( 1.75” ) titanium diaphragm Compression Speaker horn Driver Tweeter voice coil Round copper wire Speaker Parts
General Features:
Coil diameter: 44.5mm, 1.75”
Column center distance: 90mm, 3.54”
Aluminum outer diameter: 71mm, 2.79”
Dome height: 6.8mm, 0.267”
Sound film material: titanium film
Coil material: round copper wire
Nominal Impedance: 8 Ohm
Power (RMS): 100W
Power (MAX): 800W
Sensitivity(1W/1m): 110dB
Frequency Range: 600Hz - 20KHz
Diaphragm Material: Titanium
Easy to install, self-centering
Mackie: 1701-8, 17018, CD10-1701-8, CD10-1701, DC10-1701, DC10/1701-8, DC-10-1701, CD10/1701-8, SRM450, SRM-450, SRM 450, C300Z, C-300Z, C 300Z, SA-1521, SA1521, SA 1521, SR-1522, SR1522, SR 1522, 0025666, 0008093, 77005-014, S-215, S215 S 215, S-225, S225, S 225, and many more!Note: It does NOT fit older style Mackie SRM450 with the M44Ti horn driver!
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mackie SRM450 SRM-450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part
$29.99
$79.99
Replacement Fit for Mackie SRM450 SRM-450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part
44.5mm ( 1.75” ) titanium diaphragm Compression Speaker horn Driver Tweeter voice coil Round copper wire Speaker Parts
General Features:
Coil diameter: 44.5mm, 1.75”
Column center distance: 90mm, 3.54”
Aluminum outer diameter: 71mm, 2.79”
Dome height: 6.8mm, 0.267”
Sound film material: titanium film
Coil material: round copper wire
Nominal Impedance: 8 Ohm
Power (RMS): 100W
Power (MAX): 800W
Sensitivity(1W/1m): 110dB
Frequency Range: 600Hz - 20KHz
Diaphragm Material: Titanium
Easy to install, self-centering
Mackie: 1701-8, 17018, CD10-1701-8, CD10-1701, DC10-1701, DC10/1701-8, DC-10-1701, CD10/1701-8, SRM450, SRM-450, SRM 450, C300Z, C-300Z, C 300Z, SA-1521, SA1521, SA 1521, SR-1522, SR1522, SR 1522, 0025666, 0008093, 77005-014, S-215, S215 S 215, S-225, S225, S 225, and many more!Note: It does NOT fit older style Mackie SRM450 with the M44Ti horn driver!
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Mackie SRM450 SRM-450 Diaphragm 1701 Replacement Tweeter Horn Driver MR DJ Part
$59.99
$119.99
2 Replacement for Mackie SRM450 SRM-450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part (PAIR)
TWO 44.5mm (1.75”) titanium diaphragm Compression Speaker horn Driver Tweeter voice coil Round copper wire Speaker Parts
General Features:
Coil diameter: 44.5mm, 1.75”
Column center distance: 90mm, 3.54”
Aluminum outer diameter: 71mm, 2.79”
Dome height: 6.8mm, 0.267”
Sound film material: titanium film
Coil material: round copper wire
Nominal Impedance: 8 Ohm
Power (RMS): 100W
Power (MAX): 800W
Sensitivity(1W/1m): 110dB
Frequency Range: 600Hz - 20KHz
Diaphragm Material: Titanium
Easy to install, self-centering
Mackie: 1701-8, 17018, CD10-1701-8, CD10-1701, DC10-1701, DC10/1701-8, DC-10-1701, CD10/1701-8, SRM450, SRM-450, SRM 450, C300Z, C-300Z, C 300Z, SA-1521, SA1521, SA 1521, SR-1522, SR1522, SR 1522, 0025666, 0008093, 77005-014, S-215, S215 S 215, S-225, S225, S 225, and many more! Note: Does NOT fit older style Mackie SRM450 with the M44Ti horn driver!
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov