Car Speakers & Subwoofers (870)

Alpine DM-65-G 6-1/2" M-Series 400W 2-Way Coaxial Car Speakers The Alpine DM-65-G 6.5” Coaxial Speaker Set delivers high-sensitivity sound, clear highs, and a durable design for daily listening. With 50W RMS and 200W peak power, the DM-65-G is efficiently engineered to provide strong audio output without excessive power. Its 92dB sensitivity rating ensures clear, well-balanced sound, making it an excellent upgrade from factory-installed speakers. General Features: 6.5" coaxial speaker set for an enhanced listening experience. Peak Power Handling: 400 watts per pair / 200 watts each RMS Power Handling: 100 watts per pair / 50 watts each 92dB sensitivity ensures efficient, high-output performance. Tedoron tweeter diaphragm delivers crisp, detailed highs. Neodymium tweeters provide smooth treble and articulate vocals. Rubber surround enhances durability and reduces distortion. The injection-molded woofer cone ensures responsive bass. 65Hz - 20kHz frequency response for balanced sound reproduction. 4-ohm impedance for compatibility with factory and aftermarket head units. Grilles are included for a clean, finished installation Top Mount Depth: 2.5625 inches Bottom Mount Depth: 2.8125 inches Cutout Diameter: 5.625 inches Mounting Height: 0.417 inches Frame Width: 6.51 inches Frame Length: 6.51 inches What's in the DM-65C-G Package: Alpine DM-65C-G owner's manual2 Woofers 2 Tweeters (each has an 11" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Angled surface mount housings Two 56" Tweeter wires with in-line crossovers (each has quick slides on one end to attach the tweeters) 4 Self-adhesive foam pads Eight 3/4" Screws Two M4x8mm Machine screws 8 Speed clips 2 Grilles 2 Grille frames Grille putty Specs on the box Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine EL-E65C-G E-Series 6-1/2" Component Speaker System Alpine introduces the E-Series Alpine's E-Series EL-E65-G 6-1/2" component speaker system lets you experience the leap in sound quality from factory to aftermarket speakers without blowing your budget. They sound great on a factory stereo, so you can expect accurate sound when you crank them up. Alpine EL-65C-G Great-looking component speakers at an affordable price.Experience the detail of component speakers. Get ready for improvements in sound clarity and consistency. This Alpine component speaker system features durable polypropylene woofers for dynamic bass and clear mids, coupled with separate dome tweeters for precise, smooth highs. Surface- and angle-mount tweeter housings provide a variety of placement options for the best possible sound. Built-in crossovers keep music natural and true-to-life.Keep your factory stereo You don't have to upgrade your whole system to experience a better sound system in your vehicle. These speakers perform well with a factory stereo if you aren't ready to upgrade your whole system. With a sensitivity of 90dB, you'll enjoy plenty of output as well as accurate sound reproduction.About Alpine Alpine's history in the automotive industry runs deep. Over the years, Alpine has teamed up with heavy-hitter automakers like Honda, BMW, and Mercedes-Benz to crank out custom audio setups that are as sharp as the cars they go into. With the E-Series you can experience the sound of Alpine in your car, no matter the make.Product highlights:     6-1/2" component speaker system     injection molded polypropylene woofer with treated cloth surround     handles up to 45 watts RMS (180 watts peak power)     frequency response: 70-20,000 Hz     sensitivity: 90 dB     impedance: 4 ohms     cutout diameter: 5-9/16"     mounting depth: 2-1/2"     surface- and angle-mount tweeter housings included     grilles included     warranty: 1 year What's in the box: Alpine EL-E65C-G owner's manual     2 Woofers     2 Tweeters (each has an 11" length of wire attached)     2 Flush mount housings (with tweeters installed)     2 Angled surface mount housings     Two 56" Tweeter wires with in-line crossovers (each has quick slides on one end to attach the tweeters)     4 Self-adhesive foam pads     Eight 3/4" Screws     Two M4x8mm Machine screws     8 Speed clips     2 Grilles     2 Grille frames     Grille putty     Specs on box Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Absolute USA HQ-573 5x7" (6x8") 3-Way 420W HQ Series Coaxial Car Speakers The Absolute HQ series Speakers Are Your Calling Card. Available in multiple sizes, the HQ Speakers are the perfect replacement for car/Marine/ATV/UTV speaker replacement if you’re not looking to spend a lot of money. They Are Designed with a Polypropylene Cone to Provide a Punchy Sound with Quick Transitions from Note to Note. Rubber Speaker Surrounds Assist with The Linear Movement of The Cone While Simultaneously Allowing for a Greater Excursion Than Many Other Speakers. The Blast series Speakers Are Designed with a Shallow Mounting Depth and a Wide Frequency Response for Easy Fitment with Maximum Performance in almost any Car/Marine/ATV/UTV on The Market. If You’re Looking for the Next Big Upgrade for Your Car/Marine/ATV/UTV audio System, Check Out the Blast Series Speakers. General Features: 5" x 7" (6" x 8") HQ Series 3-Way Car Speakers Peak Power Handling: 420 watts per pair / 210 watts each RMS Power Handling: 70 watts per pair / 35 watts each Polypropylene-treated paper cone Butyl rubber surround 1-1/2" Ti-plated dome tweeter 1/2" Piezo tweeter Built-in crossover for more accurate sound reproduction 4-ohm impedance Frequency response: 45-20,000 Hz 15 oz. Magnet with chrome mesh protection Speaker grille covers included in the box Top-mount depth: 2-1/2" Authorized Internet Dealer 1-year Manufacturer's warranty Speaker Specifications: Speaker Size: 5" x 7" Design: 3-way Coaxial Tweeter Design: Dome Tweeter Composition: Ti-Plated Woofer Composition: Poly-Coated Paper Woofer Surround: Butyl Rubber Peak Power Handling: 210 watts RMS Power Handling: 70 watts Sensitivity: 90 dB Frequency Response: 45 - 20,000 Hz Impedance (Per Voice Coil): 4 ohms Top-Mount Depth (Mounting Depth): 2-1/2" Bottom-Mount Depth: 2-5/8" Cutout Dimensions: 5-1/8" x 7-3/8"  Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Alpine R2-S69 R-Series High-Resolution 6"x9" 600W 2-Way Car Coaxial Speakers  with Magnesium Hard-Dome Tweeters Engineered to deliver crisp highs, rich mids, and deep lows, the Next-Gen R-Series R2-S69 Speakers will elevate your music for a deafening and fun sound experience. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. General Features: 6" x 9" R-Series 2-way Coaxial Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.99" Cutout Dimensions: 5.86 x 8.66  Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the R2-S69 package: R2-S69 owner's manual Two 2-way Speakers 2 Bottom mount brackets 2 Grilles Eight 1-1/8" Screws 8 Split lock washers 8 Flat washers Eight M4 Hex nuts 8 Speed clips Warranty information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.